Word macros are disabled after converting to a PDF document.
We work with Word templates that contain macros.
After you convert a Word document into a PDF document, the macros of the attached template are disabled.
The conversion takes place via the Adobe Acrobat icons.
Used Products:
- Windows7
- With Office 2007 SP2
- Adobe Acrobat 9.3.3 Pro
The described problem only occurs in Word. Outlook, Excel and Power Point are not affected.
Thank you for your time and help
Hi Buster,
The error message you were receiving occurs when you try to convert a dynamic PDF file created with Adobe LiveCycle Designer. This file is usually already a fillable form. Unfortunately there is no workaround available for converting documents like this within the ExportPDF service.
I'm sorry for the inconvenience.
Please let me know if you have any questions or if I can be of further assistance.
-David
Similar Messages
-
How do I convert a Dutch pdf document to Word ?
How do I convert a Dutch pdf document to Word ?
While the ExportPDF service doesn't support Dutch at this time, it does support French, which uses a similar character set. You may want to try choosing French as the OCR language.
Let us know how it goes.
-David -
How can I convert a secure pdf document into word?
How can I convert a secure pdf document into word?
Hi,
Please refer to below mentioned article:
http://forums.adobe.com/docs/DOC-1515
~PRanav -
I'm trying to convert a large PDF document to word but it keeps failing. What can I do? I'm on Windows 7.
Something to try - use Acrobat to extract small page counts (say 10 pages) to have smaller page size PDF files. Export these to Word files. Then bring those together.
Be well... -
AFTER I EDIT A PDF DOCUMENT, SAVE IT , I CANT RE-EDIT.
AFTER I EDIT A PDF DOCUMENT, SAVE IT , THEN TRY TO ENTER MORE INFORMATION ON THE SAME DOCUMENT, IT WON'T ALLOW FURTHER EDITING. WHY?
Hi bay eastwood,
What version of Acrobat are you using, and are you on Mac OS or Windows? What happens when you try to edit the file a second time? Do you get an error, does Acrobat not respond, or does it crash?
Please tell us a bit more about what's happening, and your system setup, and we'll do our best to get to the bottom of it.
Best,
Sara -
After I save my pdf document, the links to different pages within the pdf take me to the wrong page. How do I fix it?
May you please elaborate... How are you creating the pdf documents (procedure, software, etc.)? How are you inserting links into your documents?... etc., etc.
-
Disable the save icon of pdf document?
Hello,
My gool is to disable the save icon of pdf document when i open the pdf document inside flex application.
Have you any ideas?
Thanks in advance,This isn't something that can be managed from the Flex end of things. You have to configure the document DRM.
-
Haw disable the saved icon of pdf document inside flex application??
Hello,
My gool is to disable the save icon of pdf document when i open the pdf document inside flex application.
Haw you any ideas?
Thanks youThis isn't something that can be managed from the Flex end of things. You have to configure the document DRM.
-
How disabled the save icon of pdf document ?
Hello,
My gool is to disable the save icon of pdf document when i open the pdf document inside flex application.
Have you any idea?
Thank youYou can not.
But you can apply document security or apply Digital Rights Management.
If you can get the users to add a special Acrobat/Reader application folder JS file, you could remove the button, but you would still have the menu items for 'Save' and 'Save as' and the keyboard short cut of '<Ctrl> + S'. -
Converting JTable to Pdf document
hello executives,
i m new to java.
can u send code that converts JTable into PDF Document.
please mention the packages possible to use and their downloads .
Regards --------RAMI cannot give you exact code to do it but I can give to a starting point to go from.
First, if you have a PDF to start from and want to be able to generate certain values onto the form, then you should get a convertor to translate the PDF into a XSL-FO file. From that file you can modify it to suit your needs.
This is the convertor that I used in my project: http://www.oneday.com.au/
I got FOP from here: http://xml.apache.org/fop/download.html
You can surely search google for a good starting place since I am sure what I have said is not a great help at all. Hopefully you received the right tools to get you on your way. -
Error - Macros are disabled while generating Blueprint
Hi all,
I am trying to generate a blueprint out of solution manager 4.0. After running basic process I am trying to run Macro "SAP_BUSINESS_BLUEPRINT". I get a error message "Macros in this project are disabled".
Kindly advice,
Thanks,
Sunil PendseHi Sunil,
Its simple. Macros in your Winword are disabled.
Open winword go to tools --> Macros --> Security --> select low and give ok.
Now open your blueprint document. and run the macro. The document will be generated.
--Ragu -
Receiving a message in my word document after converting from a PDF to word. Please advise
After converting and dowloading that converted file from a Adobe PDF file to a word document I then open the word document to see a message stateing
"To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html
For further support, go to www.adobe.com/support/products/acrreader.html"
Please proivde advise on how to sucessfully convert the Adobe PDF file to a word document.Hi Buster,
The error message you were receiving occurs when you try to convert a dynamic PDF file created with Adobe LiveCycle Designer. This file is usually already a fillable form. Unfortunately there is no workaround available for converting documents like this within the ExportPDF service.
I'm sorry for the inconvenience.
Please let me know if you have any questions or if I can be of further assistance.
-David -
Rules are disabled after disabling/enabling account.
Hi,
I have an applescript that enables or disables my work account depending on whether or not I have a VPN connection. My problem occurs when:
1. The work account is disabled
2. Mail is restarted
3. The work account is enabled again
At this point all of my rules associated with the work account are disabled. I can't imagine that this is the intended behavior.
I can re-enable all of the rules with Applescript, but it seems like I shouldn't have to.
The problem can be reproduced without using Applescript by disabling/enabling the account in Mail preferences.A little more info on the subject of rules, monitors, and alerting:
Alerts based off of Rules will not close themselves, they will always need to be closed manually. If they were alerts based off of Monitors they would (in most cases) close themselves after disabling them. If you don't want to script closing the alerts based
off the rules you can always filter or sort your alerts in the console and select all or selectively select the ones you want to close all at once and then right click and close the alerts based off rules. One other thing, for alerts based off monitors
it is usually best to reset the health of an object and let the monitor close itself rather than close an alert based of a monitor if you have a need to close it. That is unless something funky happened where the health of the object changed to healthy
and for some reason the alert didn't close in which case you can close it. The reason you dont want to just close an alert based off a monitor is because it wont reset the health of the object being monitored and will therefore not re-alert if the issue returns. -
I have Adoby PDF. How do I convert a scaned PDF document to Word?
I have Adoby Export PDF. How do I convert a scsned PDF to a Word document?
Hi William,
Here you go!
How to export your PDF file to Word file:
1.Log into https://exportpdf.acrobat.com/signin.html with your Adobe ID and password
2. Select "Export from PDF' from right pane
3. Click "Select Files" button then choose your PDF file for exporting to Word file
4. Select a format like docx or doc for Word file
5. Check On for "Recognize scanned text in" if your PDF file contains scanned images
6. Click "Export" button
7. Download the Word file by clicking "Download" in the progress bar
8. Open the Word file in Microsoft Word for editing.
Or you can export your PDF file in Adobe Reader
1. Launch Adobe Reader and open your PDF file
2. Select "Tools" and click "Sign In" link to sign in with your Adobe ID and password
3. Select "Export PDF"
4. Click "Convert" button
5. Click "Download Converted File" link to download the exported Word file to your computer.
Regards, Stacy -
Convert part of pdf document to word
I need to convert part of a document to word not the whole document as is way to big and i do neot need the other parts. can I do that and how?
Hi Pistonvandrom,
Unfortunately, it is not possible to convert a part of document via Adobe ExportPDF, it is only possible if you use the complete PDF solution Adobe Acrobat.
For More details: http://www.adobe.com/products/acrobat.html?promoid=JOLIR
let me know if you have any other question
Regards,
~PRanav
Maybe you are looking for
-
Battery time wrong after upgrading to new conky
I use conky and have a section which tells me if the battery is active and if so what's the percentage and how long do i have left until the battery dies. It was working fine, with the right time estimation until i upgraded to the new conky version
-
Importing Testcases from Word Document
I want to import testcase form Word Document document to MTM tool. Are there any tools available for acheving this? The testcases table to import is not getting recognosed when I tried with "Test Case Migrator Plus". Able to import if the testcases a
-
How to make an checkbox editable and uneditable within a single alv output.
Hi, How to make an checkbox editable and uneditable within a single alv output depending on condition. I have used Reuse_alv_grid_display. In my output every checkbox is editable. i have used edit = 'X'. I want editable checkbox for correct value and
-
Receiver: "Sending Cancelled" / Sender: "Completed...
Receiver: "Sending Cancelled" Sender: "Completed transfer" Everytime I'm sent files on Windows.
-
Samba - disabling access for certain users on domain member servers
Hi all! I'm running a small network that has domain logons for windows clients and I want to have single sign on (samba shares and shell accounts) on those three servers I'm running. The problem is, I don't want to allow all users to access all serve