Word Stopped Printing the correct current page, prints page #1 instead

Word 2013 will no longer print the correct current page when asked to do so--it prints page 1 instead. There is no problem with the document(s) involved as they will print the correct current page with another user. If you highlight a selection,
it will print that correctly, except without the headers and footers. If you specify the section and page numbers, that also works (and the headers and footers come out OK). The print drivers are not the issue as the printer drivers
in question are on the print server and work as expected for other users.
Creating a new profile for the user does fix the problem, but only temporarily, in a week to 2 weeks the problem comes back. I am looking for a simpler solution than creating a new profile every week or 2 for the user.
I have tried the following steps without any success.
Deleted all the normal.dotm files from the computer and have
Deleted the Word Data key in the HKEY_CURRENT_USER|SOFTWARE\Microsoft\Office\15.0\Word.

Hi,
I first suggest you check the printer setting, since the problem may by caused by the incorrect printer mode. We can also try updating the printer driver to the latest to check the result.
Is the source file is openning in the Compatibility Mode? Whatever it is, please copy all of content from your current document to a new creating docx to check the result.
If the issue still persists, please try to repair Office from Control Panel -> Programs -> Programs and Features -> Office 2013 -> Change -> Repair.
Feel free to let me know if you have any other concern.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Problem with printing the correct "ical" pages.

G'day
I have only recently started using "iCal", on the cloud, having upgraded my laptops to "Lion" and my iPhone to "5", so that I have NOT experienced any of the "syncing" problems of which I have read elsewhere.
BUT, I do have an irritating problem, the solution to which, being a long-term Mac user, should be obvious.
The problem stems fronm the fact that I am located on the east coast of Australia, and my laptops know this.
The first, really daft, thing that I did was to create a whole lot of iCal entries, in iCloud, without noticing that the default timezone was "Pacific".
So, OK, I fixed that by going into my ID on iCloud and changing the timezone, and then editing every single event that I had entered at that point in time.
So, I then thought that I had beaten the beast, because I had only been printing "Weekly" calendars, which were OK.
Today, I decided to print some "daily" calendars, and the system WILL NOT PRINT THE CORRECT DATE.
My iCal entries are mainly to do with a trip that that starts on 1st August this year. I bring up iCal on the Mac, go to the print page, select 01 Aug 2012, and it prints 31 July 2012.
This happens whether I tick the "Timezone" preference in iCal on the Mac, or not.
What else should I do?
Dave the Desperate

Hi Srikanth,
In the second page you can insert a command to set it to goto page 3,and an additional event in the command (only after the end of main window).
As soon as the main window ends in the second page...u will get the third and rest of the pages.
Keep the goto next page in PAge 1 as Page2
and in Page 2 as Page 2.

I Sorted but I am trying to get the correct Month to print

{noformat}I am creating a program that requires me to get the highest number and lowest number in a month.I have sorted the Array into a 1 dimesional Array of [12]. Here is my issue How do I get the Highest and lowes number reported while How can I get the correct Month to print? I keep getting Jan and Dec obviously since they are the first and last month.
I am not sure how to do a sort that will get me the proper month.
I am creating a program that requires me to chose the highest number and lowest number of the 12 months calculated. I created a seperate sorting array. Currently these number are in the indexed memory location. This Array of numbers is not Initialized! I am just showing what is currently in memory.
double total [12]={114,93.10,89.30,92.90,98.40,111.00,102.40,105.40,81.40,82.60,80.90,113.40} .
//intialized
String[] months={"January","February", "May","June","July","August","September","October","November",
"December"};
Here is my issue How do I get the Highest and lowest number printed that also corresponds with the correct month? I have a String of months. I just dont understand how I can do this. My highest numner is 114 which is January and my Lowest 80.89 is November. Is there another part of the swapping I am missing?
Here is my code. Thank you for your help. I am having issues getting proper code formatting.
import java.util.Scanner;
import java.io.*;
import java.util.*;
import java.util.Arrays;
public class MonthRain
    public static void main(String[] args) throws IOException
                String[] months={"January","February", "March","April","May","June","July","August","September","October","November",
                "December"};
                final double [] [] rain = {
                { 10.1,8.1, 6.8, 4.2, 2.1, 1.8, 0.2, 0.3, 1.1, 2.3, 6.1, 10.4,6.6,5.5, 3.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.0, 1.3, 2.6, 4.2,2.3, 6.1, 7.4,6.6, 5.5, 3.8},
                { 9.2, 9.8, 4.4, 3.3, 2.2, 0.8, 0.4, 0.0, 0.6, 1.7, 4.3, 5.2,6.6,5.5, 3.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.0, 1.3, 2.6, 4.2,2.3, 6.1, 7.4,6.6 },
                { 6.6, 5.5, 3.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.0, 1.3, 2.6, 4.2,6.6,5.5, 3.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.0, 1.3, 2.6, 4.2,2.3, 6.1, 7.4,6.6, 5.5, 3.8},
                { 4.3, 4.3, 4.3, 3.0, 2.0, 1.2, 0.2, 0.2, 0.4, 2.4, 3.5, 6.6,6.6,5.5, 3.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.0, 1.3, 2.6, 4.2,2.3, 6.1, 7.4,6.6, 5.5, 3.8},
                { 8.5, 8.2, 1.2, 1.6, 2.4, 0.0, 5.2, 0.9, 0.3, 0.9, 1.4, 7.3,6.6,5.5, 3.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.0, 1.3, 2.6, 4.2,2.3, 6.1, 7.4,6.6, 5.5, 3.8},
                { 10.1,8.1, 6.8, 4.2, 2.1, 1.8, 0.2, 0.3, 1.1, 2.3, 6.1, 7.4,6.6,5.5, 3.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.0, 1.3, 2.6, 4.2,2.3, 6.1, 7.4,6.6, 5.5, 3.8},
                { 9.2, 9.8, 4.4, 3.3, 2.2, 0.8, 0.4, 0.0, 0.6, 1.7, 4.3, 5.2,6.6,5.5, 3.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.0, 1.3, 2.6, 4.2,2.3, 6.1, 7.4,6.6, 5.5, 3.8},
                { 9.2, 9.8, 7.4, 3.3, 2.2, 0.8, 0.4, 0.0, 0.6, 1.7, 4.3, 5.2,6.6,5.5, 3.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.0, 1.3, 2.6, 4.2,2.3, 6.1, 7.4,6.6, 5.5, 3.8},
                { 6.6, 2.5, 3.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.1, 1.3, 2.6, 4.2,3.6,5.5, 3.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.0, 1.3, 2.6, 4.2,2.3, 4.1, 7.4,6.6, 5.5, 3.8},
                { 2.6, 5.5, 3.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.3, 1.3, 2.6, 3.2,6.6,5.5, 1.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.0, 1.3, 2.6, 4.2,2.3, 6.1, 7.4,6.6, 5.5, 3.8},
                { 4.3, 1.3, 4.3, 3.0, 2.0, 1.2, 0.2, 0.2, 0.4, 2.4, 2.5, 3.6,6.6,2.5, 1.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.0, 1.3, 2.6, 4.2,2.3, 6.1, 7.4,6.6, 5.5, 3.8},
                { 8.5, 8.2, 1.2, 1.6, 2.4, 7.0, 5.2, 8.9, 0.3, 0.9, 1.4, 7.3,6.6,5.5, 3.8, 2.8, 1.8, 0.2, 0.0, 0.0, 0.0, 1.3, 2.6, 4.2,2.3, 6.1, 7.4,6.6, 5.5, 3.8}};
               double [] total=new double [12];
               double total_rain=0;
               double average=0;
               int col=0;
               int row=0;
               int i;
                              for( row=0;row<rain.length;row++){
                                   total_rain=0;
                                   for( col=0;col<rain[row].length;col++){
                                      total_rain+=rain[row][col];
                                           average=total_rain/(col+1);
                                           total[row]=total_rain;
                                   System.out.printf("%9s Total Rain= %4.2f\n ",months[row],total[row]);
                                   System.out.printf("%9s Montly Average= %4.2f\n ",months[row],average);
                                   System.out.printf("\n");
                                           for(i=0;i<total.length;i++){
                                             System.out.printf("Total Rain=%.2f\n",total);
                                             double minValue;
                                                                      int sort,index,minIndex;
                                                                      for(sort=0;sort<total.length-1;sort++)
                                                                           minIndex=sort;
                                                                           minValue=total[sort];
                                                                           for(index=sort+1;index<total.length;index++)
                                                                                if(total[index]<minValue)
                                                                                     minValue=total[index];
                                                                                     minIndex=index;
                                                                      total[minIndex]=total[sort];
                                                                      total[sort]=minValue;
                                                                 System.out.printf("High Rain=%s and Low Month=%s\n",total[sort],total[0]);
                                                                 System.out.printf("\n");
Edited by: happyfootsie on Dec 6, 2009 1:12 AM
tried to fix formatting

happyfootsie wrote:
Here is my issue How do I get the Highest and lowes number reported while How can I get the correct Month to print?OK, apart from the fact that you've dumped everything in one place as opposed to breaking up your logic, the main thing I can see is that you have no inherent mapping between the values that you're storing and the months that they apply to.
That's all fine while you're just pulling in the values (I assume that each block of 12 is listed from January to December), but the second you do a sort, you lose the fact that '114.93', which is probably now in last place (being the highest) actually referred to the month of January.
First suggestion: break it up into methods (a couple of suggestions would be 'getAverages() and 'sort()', but I'm sure there's more).
Second suggestion: Have a look at the Java Collections framework (you might want to start here). It has a shed-load of classes for doing exactly what you want.
Winston

How to Print the space in Top-of-Page in ALV output

Hi gurus,
     I had a problem in Printing the Spaces in Top-of-Page.
My Requirement is like.
Material no: (space with 18 char) to   5235268
but it is coming like .
Material no: to 5235268
i wrote the code like this.
form Top_of_page.
IF s_matnr IS NOT INITIAL.
      wa_header-typ = 'S'.
      wa_header-key = 'Material No:' .
      IF s_matnr-high IS INITIAL.
        MOVE s_matnr-low TO wa_header-info.
      ELSE.
        CONCATENATE s_matnr-low ' to ' s_matnr-high INTO wa_header-info SEPARATED BY space.
      ENDIF.
      APPEND wa_header TO tb_header.
      CLEAR wa_header.
    ENDIF.
Thanks & Regards,
Anil.

Hi Anil ,
If u concatenate anything with space , your space will be lost.
Give a try for this if your s_matnr-high is initial.
data : c(21) type c.
IF s_matnr-high IS INITIAL.
Concatenate '(19 spaces )to' into C.   concatenate C s_matnr-low into wa_header-info SEPARATED BY space.
endif.
<b>Please Note i wanted to put spaces at "(19 spaces)to" but posting this message is removing those spaces so have put it in words.</b>you have to take Variable c with first 19spaces and then 'to' as shown.
Here the Variable C is with 21 length for 18 spaces , one space to separate the 18 spaces from 'to' , and then 2 chars for 'to'.
I hope this will help you.
Regards,
AShwini

How to print the Actual Check on 1st Page if line items are more for F110_p

Hi,
How to print the Actual Check on 1st page if the line items are more in F110_PRENUM_CHCK script. The standard script is printing at the last page of line items.
I tried using
IF &PAGE& EQ '1 '
/E 545 --> text element
ENDIF
but it is of no use.
Please let me know if anyone knows. Thanks in Advance.

Hi Krishna,
I guess, there is no other possible way to acheive this without modifying the standard driver program. Why because? in you driver program you check window will be called only on the last page... but before you change your driver program give a try like shown below....
Not sure, but give a try... In the first page you will be printing some void check try to replace the code inside the text element of void check with original check and make all the check void... note: in this text element, be sure you write two conditions...
IF &PAGE& = 1.
**PRint all check values..
ELSE.
***Print void values
ENDIF.
Close the thread if your question is answered.
Regards,
Sairam

Finding the correct date to print on the report....

Hi SAP,
I've hit a road block and I need someone's help please.
I have a main report that displays employee hrs worked, work dates based on invoice number.
I also have a subreport that looks at a specific table that prints the entire employee's rate history. The employee rate history table contains the rate and the effective date, i.e. 01/01/2008 rate: $100, 04/01/2008 rate: $300, etc. It can contain many rows of information.
My problem is that I need to figure out what the corresponding rate should be for the given work date on the main report. The work date can be any date within the given year so I can't link up the work date from the main report and the effective date on the subreport.
As an example, say, we take the above rates and effective dates as an example.
On my main report, if I have a work date of 01/05/2008, how can I pull in the $100 rate from the subreport into the main report? Similarly, if I had a work date of 04/17/2008 how can I pull the $300 as the rate from the subreport into the main report? I need to figure out what rate is applicable for each work date.
Any help would be GREATLY appreciated!!
Z

Raghavendra,
Thanks for your reply. However, the only time the subreport prints data is when the main report's work date's month and year equals the subreport's month's effective date and year's effective date. However, there can be gaps in the effective dates. An employee doesn't necessarily get a new rate effective each month. It could be once a year or 7 times a year.
So say you have 2 effective dates for 2008, 01/01/2008 with rate $200, and 05/01/2008 with rate $400. based on your logic, the only time the subreport will print the correct data for this employee's rate is if the work date is in January of 2008 and May of 2008. But, if this employee has a work date of 03/01/2008 in the main report, the subreport will print a null value.
How can I overcome this?
Thanks,
Z

Printing the correct string...

Hi guys,
i've a simple question for you but i'm not able to solve it.
Ihave a string composed by 5 field separated by whitespace
and i want to print it with this format
The first field is a string
The second,the third and the fourth is a double.
How can i do this cast before printing the correct string....?
Please help me with code...

Hi guys,
i've a simple question for you but i'm not able to
solve it.
Ihave a string composed by 5 field separated by
whitespace
and i want to print it with this format
The first field is a string
The second,the third and the fourth is a double.So? If it's already a String, then just print it, and everything will get printed. Of course, if that's not what you want, you'll have to provide more detail.
If you want to split the string up into its pieces, and you know the only whitespace is the separators, then you could do this: String[] pieces = str.split("\\s+"); Read these to learn more about the regex that split uses:
Sun's Regular Expression Tutorial for Java
Regular-Expressions.info

How can I use documents created in Pages 08 with the most current version of pages?

I just upgraded to the most current version of Pages from Pages 08. However, none of my files created with Pages 08 will open. I am told that I first need to save them with Pages 09, but I don't have Pages 09. What can I do to convert these files into a format that works with the newest Pages?

I have the same problem. There are a couple of clumsy workarounds. One is to open your file with Pages 08 and export it as a Word document, then import it into Pages 5. The second one is to open the file in Pages 08, copy the contents to the clipboard and paste it into Pages 5.

Print the user address in print layout

hi
i need the print the user address in print layout.the address store in OUDG. but i call this field in pld. But its not print anything..please any one give the suggestion
We have the three branches.but using one pld. So the user default address show in pld in automatically changes as per user enter.
Edited by: Isayah.I on Nov 6, 2008 9:53 AM

Hi there,
So you have three branches using only one PLD? If the address is not showing. please try to create a three PLD's for the three company branches, every time the user print a PLD they must choose a PLD assign from them.
Regards,
Clint

Not enough space to print the last record on each page

Hello,
My report looks like a simple list table, with the first row as the column header, followed by rows of records.
The fields are placed on the Detail section and they're set with "Can Grow" property. That means, records may have different row height, some may take 1 row per record, some may take 3 rows per record, depending on the data length. I use some vertical lines on the Detail section as the column seperators, and a horizontal line as the record seperator.
I've a Page Footer to show the page number and print date.
My problem is:
When the space of the last record on the current page isn't big enough, the record will be printed automatically on the second page, which is fine. But the vertical seperation lines are still displayed even though the details are printed on the second page. I got some "empty rows with vertical seperation lines" or I'd say an open-end table at the end of some pages then.
Is there a way to avoid this?
Your help is much appreciated. Thank you.
Agnes

You could draw an outline box from page header to page footer, then your internal lines would run from page header to page footer
so if the document extends to 2 pages, the page footer will print on the 1st page and therefore the bottom line of the box
only problem now would be that on the 2nd page the box will extend to the bottom of that page also, even if there is only 1 record

10g 10 on XP PRO - Which property to print the master group on each page?

Hi,
I'm building a reports that displays the sum of orders totals per customer then per salesman.
All fields have "print on first page" property set.
However the salesman ename prints only on the first page of the report.
If I change to "print on every page", the whole install goes "booom" !! :-(
There are 3 repeating frames:
group_emp
--[group_customers]
-----[group_orders]
Here is the same report on SQLPlus (in case someone loses faith and needs a report badly)
set pagesize 40
set linesize 110
set pause on
set pause .........[Return]................
clear breaks
clear computes
ttitle center "Orders Totals by Employee"
break on ename skip page on custname skip 1
compute sum of order_total on ename
compute sum of order_total on custname
select
e.ename
, c.custname
, o.order_date
, o.order_total
from emp e, customers c, orders o
where e.empno = c.empno
and c.custno = o.custno
order by e.ename, c.custname, o.order_date
Many thanks if you can help
Message was edited by:
JeanParis

Hi Fs, just like I wrote, Reports decided to shut down immediately, so I had to stop running OC4J instance and shutdown the PC running the 3 Oracle services.
The PC has a Dual Core and 2 Gigabytes of Ram.
I checked the reports at my company today, the only difference is that the frames display on every page and the fields display once.
I think I have to reread the manuals before attempting to display one salesman per page.
Remember what we used to say on Compuserve: There is only one thing more stubborn than a bug, it's a stubborn debugger.

I can only print first 80 or so pages after I download firefox - if I do a system restore and uninstall firefox, the problem goes away... until I download firefox again and then I again can only print the first 80 or so pages - even if I am using IE!

This began when business increased in January and our print jobs got big (printing invoices off the internet). It can print any small job no problem but if it's over 80 or so pages, it will stop and show a spooling error. I have done system restores and uninstalled firefox and then Internet Explorer will print the big jobs UNTIL I REINSTALL FIREFOX. Then the problem resurfaces whether using firefox or IE!!! Why?! I don't care why - how do I fix it? All 13 other computers use firefox and that is how my staff is trained. I hate IE.

-> '''Is my Firefox problem a result of MALWARE ??'''
* Popups Not Blocked - http://kb.mozillazine.org/Popups_not_blocked
-> Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their Databases before doing a Scan. Also, Close All other Applications (softwares) before Starting to Run Scans.
* Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
* SuperAntispyware - http://www.superantispyware.com/
* Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
* Ad-Aware Free Internet Security - http://www.lavasoft.com/products/ad_aware_free.php
Check and tell if its working.

How can you print mirror image from word 2010 on the HP Photosmart c310 printer

Trying to print mirror image from Microsoft 2010 on a windows 7 computer to the HP Photosmart C310 printer. Can not find an option. Please advise.

Judith
Perhaps you can enlighten us as to what "does not print correctly" actually means.
Miss-spells your name? or what?
How have you set up your Page set-up?
It has to agree with how you are feeding the envelope in and what printer driver you are using.
Peter

How to print the data in a seperate page / text file

Hi Experts,
I have created WD program which fetches data from R/3 using RFC. I am using following statement for printing the results:
wdComponentAPI.getMessageManager().reportSuccess("The value is " + value);
I am running the code for 20,000 rows. The results are printed on the same IE page. However it becomes difficult to see the results. I want to get the output printed in any of the following ways:
Option 1
1) There should be a link in WD program. When the user willl click on the link other IE page should get open and results should be printed in this page.
Option 2
2) The ouput should be written in a text file and user can store the file in local machine.
Please help me.
Regards,
Gary

Just create a function in your WD application that writes these lines (in loop; pass array of strings to the function) on a text file and saved as a web resource object then have it available for download by the user. Simple as that.
Search for WD tutorials that involves downloads and using the web resouce object in WD applications.
This guide should provide you a good feel through the entire approach: /people/bertram.ganz/blog/2007/05/25/new-web-dynpro-java-tutorials--uploading-and-downloading-files-in-sap-netweaver-70

Trouble printing the correct dimensions.

Hello everyone.Apologies in advance if this a rather basic query. I'm using CS5 on Windows.
I created a photoshop file using the International Paper settings A4, which is 297 by 210 and 150 pixels per inch.
I've used the whole area around the document but I left around a 5mm margin around the edge of the document.
When I come to print the document does not appear to be scaled correctly in the print preview, and then when I come to print on A4 paper measuring exactly 297 x 210 a large part of the image is chopped off at the bottom.
Can anyone explain to me why Photoshop seems to indicate it is a 297 x 210 file but when it comes to printing it is not scaled correctly?
LIkewise how I can fix this and avoid it in the future? Many thanks.
Would be much appreciated.

Generally speaking, if you make your image so that it fits within the printable space on the printer, and don't use the [ ] Scale To Fit Media option, it should print at exactly the right size. But it will print your image inside the printable space - right up to the edges of it.
I think your trouble is that you're trying to anticipate the non-printable space and put it inside your image.
Figure out what your printable space is, and try making your image just that size.
-Noel

Word Stopped Printing the correct current page, prints page #1 instead

Similar Messages

Maybe you are looking for