Word suggestions not available in Maps Drive+

When I type in a location in Maps I get suggestions (street names, etc.) come up on the screen after typing in only a few letters and I can then select these suggestions to search.
Why isn't this feature in Drive+?
In Drive+ I have to type in the whole word and even suburb; if I'm one letter wrong it won't be found in the search; at least with 'word suggestions' I can quickly select a search word with less chance of error.
If it's not possible to switch word suggestions on in Drive+; I'd like to suggest this as an upgrade.
s
Solved!
Go to Solution.

The keyboard is without word suggestions in Drive+ but it displays a list of possible destinations under the search input field similar to Maps (although not identical) on my Lumia - after entering three or more letters, if it is online?
Hans

Similar Messages

  • Location is not available to mapped network drive in Windows 8 using Synology NAS

    Original Thread:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-files/location-is-not-available-to-mapped-network-drive/ca7eac5c-0e3d-494b-b488-e245978e4db9
    I have recently upgraded to Windows 8.1 standard edition. I have come across a problem when using the option for mapped network drives. Under Windows 7 I would normally map a network drive (Synology NAS) and I could access all files, copy and paste, install
    apps, and link media, all from within the mapped network drive. However, under Windows 8.1 I have come across a couple of problems.
    1. When I try to copy a file from my "Mapped Network Drive" to the C:\Drive (OS Boot Drive), I get the following error,
    "E:\ is unavailable. If the location is on this PC, make sure the device or drive is connected or the disc is inserted, and then try again. if the location is on a network, make sure you're connected to the network or internet, and then try again. If the
    location still can't be found, it might have been moved or deleted."
    However, if I copy a file from the "NETWORK/Network Location" the file copies just fine with no problems. And, If I also copy a file from a "Added Network Location" the file also copies just fine with no problems. And, if I copy a file from
    my "Mapped Network Drive" to my D:\Drive (non OS Drive), the file copies just fine with no problems.
    2. When I try to install apps from my "Mapped Network Drive" they will sometimes install and sometimes not (I am also choosing the option to run the programs as Administrator). Again if I try to install using either the "NETWORK/Network Location"
    or an "Added Network Location" the apps install just fine with no problems.
    3. When I link media (music or videos) from my "Mapped Network Drive" they will work but once I reboot they no longer work as if they have lost the file path or link of the original source location.
    4. When I use FireFox (browser) and I set my default download dir to my "Mapped Network Drive" it will work once originally set it but after I reboot, it no longer works. However, again if I set the default download dir to either the "NETWORK/Network
    Location" or an "Added Network Location" the default download dir works fine even after reboot.
    While I am able to access my network drive using any of the three options, "Mapped Network Drive", "NETWORK/Network Location", and "Added Network Location" but only "NETWORK/Network Location", and "Added Network
    Location"appear to be reliable. Tbh I would prefer to be able to use my "Mapped Network Drive" in Windows 8 as I have been able to under Windows 7.
    More info:
    I currently have UAC set to "Never Notify".
    I also have Windows 8.1 installed on three different systems and all of them give me the same exact problems. One of the systems is a completely clean install with no 3rd party apps installed.
    Just so its clear I am able to access the "Mapped Network Drive" but unfortunately this method of access appears to be unreliable in Windows 8 but in Windows 7 it works flawlessly.
    If I map a network drive from another pc running windows 7 or 8, I can access and use the mapped drive with no problems. This problem appears to be related to the Synology NAS devices and I have researched the Synology forums but only found one thread about
    the problem, here:
    http://forum.synology.com/enu/viewtopic.php?f=49&t=76687
    I have searched several forums and attempted to pick the brains of my local computer shops for any incite on this problem but I have been unable to find a solution/fix.
    Any help resolving this is greatly appreciated.

    Hi,
    Based on your description, we can temporarily disable the firewall to see whether the issue persists.
    For this issue seems related to the Synology NAS devices, in order to get professional help regarding the product, we can contact the vendor support to see whether the issue
    can be fixed.
    Best regards,
    Frank Shen

  • D7360 automatic duplex printing is not available with latest driver

    d7360 automatic duplex printing is not available with latest driver
    This question was solved.
    View Solution.

    Hello ephsh,
    Welcome to the HP Forums.
    I see that you are having an issue attempting to do some duplex printing.
    So I can better assist you, please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    I am going to attach a document that deals with a Two-Sided Print Option Is Not Available Even Though an Automatic Two-Sided Printing Accessory (Duple....
    Please feel free to write me back at your convenience.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Directions not available in maps

    After updating my iPhone 4 to ISO 5, my maps says directions not available.  Is anyone having this problem?

    simillar problem but mine happened when upgrade from ios 4s to ios 6

  • Quick Parts from Word 2010 not available in Outlook 2010?

    Kinda feel daft asking this...
    If I type a Autotext (Quick Part) in Word 2010 it doesn't seem to be available in Outlook 2010 and vice versa.  Each program seems to be using it's own default template.  Saving it to Building Blocks.dotx also makes no difference.
    From what I've found looking around the internet it seems this is intentional and the only way to get me AutoText from Word 2010 is to copy the Normal.dotm to NormalEmail.dotm is this right?
    Thanks in advance.

    Hi,
    Your question is not daft! You are right in that there are two templates that are used for Quick Parts. Indeed very annoying because why would you have to insert the same autotext twice right? Unfortunately this is how we stand now.
    Maurice
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer. Thank You

  • IPad Mini - Word Suggestion not working

    When I am using Pages on my iPad mini and I spell a work wrong it does not let me correct it, well it does not give me an option to correct it. When I click on the word (pages does indicate a misspelling by underlining it in red) it highlights it, but I have no options (select, copy,  define, suggest..etc). Any one know what I can do to fix this problem? Thank you

    Have you tried to reset it? Hold down the sleep and home keys until you see the silver apple. For about 20 seconds or so. See if it'll reboot and then see if the screen works.

  • Deleted Disk Image but space is not available on hard drive

    I was trying to share the iPhoto library across users by creating a Disk Image via Disk Utility.
    It didn't go a planned as I needed more space than originally allocated. The resizing option in Disk Utility specified the Maximum Size was less than what I needed.
    My next step was to delete this Disk Image, I believe I did this by selecting Edit > Delete
    The Disk Image disappeared however the 80 GB never reappeared on my harddrive as available.  I tried emptying the Trash but that did not correct the problem.
    Any assistance would be much appreciated.

    No the /Volumes folder twtwtw is refering to is at the top level of the root disk.
    To see it open a Finder window and select the Go menu item
    then select Go to Folder…
    Now in the window that opens enter /Volumes
    Then Go
    the /Volumes folder will open. There should be no regular files or folders in there

  • Unable to remove Mapped drives GPO

    Hello
    Windows Server 2008 R2
    I previously create some mapped drives for users in 2 cities (same lan different ips - 10.10.2.x and 192.168.0.x)
    Under each ou I have gone into the GPO preferences and created a "Delete" under map drives.  When rebooting the workstations, the drives are still there and mapped.  I deleted the GPO for them and still, they show up.  I also created
    a new mapped drive and is sporatic to users (some users it does show up, others it does not show up).
    I cannot figure out why they are still being mapped or why only some users see the new mapped drive and some don't.  Even those users that see the new mapped drive still see the old ones as well.
    Any suggestions?
    Thank you
    Terry

    Hi Terry,
    There may be few things which you check
    1. Run RSOP or GPresult on users system and confirm if the old / new groups are getting applied.
    2. Make sure that group policy objects are replicated all domains Controllers in domain so that there is replication issue which is causing this behavior
    3. As suggestion if you need map drives for these users then don't need create new delete map drive. You can remove the original map drive settings or filter out these set of users using item level targeting.
    Hope this helps to resolve the issues.
    Regards,
    Rajesh J S

  • DC containing UI component of task is not available

    Genereating version ID's for sources...
    Compiling workflow...
      [BpemTask] WARNING: [System.err] [Invoked from  com.sap.bc.krn.perf.PerfTimes.internal_TRC(PerfTimes.java:103)]
      [BpemTask] WARNING: [System.err] PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
    Warning: Deploy time dependency to DC (filein/wd) containing UI component of task (Develop CA) is not available
    Warning: Mapping in AssignT0 does not do any transformations.
    Warning: Mapping in AssignT4 does not do any transformations.
      [BpemTask] [System.out] [Invoked from  com.sap.glx.paradigmInterface.triggernet.assembler.GalaxyAssembler$AssemblerRun.checkNode(GalaxyAssembler.java:706)]
      [BpemTask] [System.out] Here.
      [BpemTask] [System.out] Here.
      [BpemTask] [System.out] Here.
    Transforming Trigger Network into CSV...
      [BpemTask] [System.out] Here.
      [BpemTask] [System.out] Here.
      [BpemTask] [System.out] Here.
    my bpm always has build log like this.
    i have no idea why it( Deploy time dependency to DC (the ui project) containing UI component of task (task name) is not available ) happen.
    maybe it happen because i chenged the web dynpro's context, but is that normal? or how can i fix it?

    Hi Vic,
    Looks that you have defined a Deploy time dependency on some DC and it is not present in your local machine while you are deploying your Process Composer DC. If you are working in a NWDI environment, then you can sync all the dependent DCs to resolve this issue. Else you can also remove the Deploy Time dependency for the DC, but ensure that all the DCs having runtime dependency are available at runtime else it will lead to issues at runtime.
    Hope this helps!!
    Cheers,
    Arafat

  • Photos doesn't shows up on webpage, prompt "Image not available"

    photos can't show on ebay webpage, instead a black box with the word "Image not available". Tried to reinstall Firefox, but problem is still the same.
    Error console shows:-
    Error: uncaught exception: [Exception... "Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [nsIDOMLocation.hostname]" nsresult: "0x80004005 (NS_ERROR_FAILURE)" location: "JS frame :: chrome://searchshield/content/avgls-active.js :: avg_ls_nodeinserted :: line 85" data: no]
    == URL of affected sites ==
    http://cgi.ebay.com/Rare-Pyn-Up-1-48-PB4Y-2-Privateer-Nose-Art-Decals-/290446723348?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item439ff94914

    Try to disable or uninstall all AVG extensions and toolbars.
    See [[Troubleshooting extensions and themes]]

  • Assets upload: Deactivation Date is not available in the Standard Program

    Hi,
    I am trying to use the standard program for Assets upload,RAALTD01. But, the field de-activation date (ANLA-DEAKT) is not available for mapping. This is the only field am missing out of more than 200 fields involved in the upload. What would be the best approach inorder that I can use LSMW and at the same time map this deactivation date field ; provided we are not using the Recording method.
    Looking forward to your replies.
    Regards,
    Sophia Xavier

    you can use ABAP program with BAPI 
    call function 'BAPI_FIXEDASSET_OVRTAKE_CREATE'

  • Asset upload: Deactivation Date not available in the standard program(LSMW)

    Hi,
    I am trying to use the standard program for Assets upload,RAALTD01. But, the field de-activation date (ANLA-DEAKT) is not available for mapping. This is the only field am missing out of more than 200 fields involved in the upload. What would be the best approach inorder that I can use LSMW and at the same time map this deactivation date field ; provided we are not using the Recording method.
    Looking forward to your replies.
    Regards,
    Sophia Xavier

    It is not possible to do this in the transaction AS91. When you are doing the take over during a fiscal year you have to go from the tab Asset values to Transactions and fill in there the ttype for deactivation.
    Other wise you have to create a LSMW that is doing this deactivation after the upload

  • DirectDraw Acceleration, Direct3D Acceleration, AGP Texture Acceleration NOT AVAILABLE

    ThinkPad T61 7664-RWU
    As the title says, the DirectDraw Acceleration, Direct3D Acceleration, and AGP Texture Acceleration are not available. What driver should I install to make them available? Where to download the driver?

    Please give us some more information...
    Why do you think the stated forms of Acceleration are not available? Where are you getting this information from?
    Please take a look at the Windows Device Manager. What Display Adapter do you have, and at what level is its driver?
    Centex

  • Mapped Drive - Location Not Available

    I have a small recurring problem that is starting to get a little bit bigger.
    My environment is:
    Server 2012 Standard, AD, File Server, Print Server. Running on Hyper-V (2008)
    Clients are Windows XP, Vista, 7, and 8.1 all professional.
    I have a number of mapped drives that all go to this same file server. If I open a Windows Explorer window on any client and leave it open, after a while (always seams random), I will eventually get an error message saying "Location Not Available"
    The contents of the directory I was looking at goes blank when this message comes up. I can click OK and immediately hit refresh on the Explorer window and the contents will come back.
    Most of the time this is annoying but I am finding a couple of applications that do not like this behavior. They crash or close connections when this happens.
    I have had a Remote Desktop connection open to this server while getting this and it does not get disconnected. I do not see anything that looks related at all in the log files of the client, the server or the Hyper-V host. I have made sure that the drivers
    on Hyper-V are up to date as well as all firmware (especially the network cards).
    I am not sure if the problem started when I upgraded my personal workstation to Windows 8 (from 7) but that is when I first started to notice this.

    Hi,
    Do you mean the issue only occurs on Windows 8 systems?
    Also whether these mapped folders are DFS shares or just normal shared folder?
    If DFS is involved, test to disable Client Side Caching to see if it is related. Please add this key in all DFS target servers.
    HKLM\System\CCS\Services\LanmanServer value=<sharename> cscflags=48
    As it is a random issue, it will be difficult to find out the root case. You can try to capture a network trace with Network Monitor when the issue occurs. Let's see if any specific information could be found. 
    Detailed steps could be found:
    http://support.microsoft.com/kb/812953
    Note: As the issue occurs randomly, the package may be large as you need to wait until the issue occurs.
    Note2: you can upload package to OneDrive however as is open to public so everyone could see that package. 
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • External drive says "the backup disk is not available"

    I am trying to use an external back up drive with time machine on my macbook air.  The air is an older model (150G)  and the drive is 250G.  I used to use this drive on my macbook pro, but then erased it to use on my air.  Now I get a message "Time machine could not complete the backup. The backup disk is not available". 
    What I've done so far:
    -I've looked on the drive icon on my desktop and made sure it is empty.
    -I ran a disk utility repair.
    -I rebooted the computer.
    Thanks for anything you can suggest!
    -Kate

    old 250GB  ext. HD,  likely dead SATA card, or the HD is kaput
    verify on another Mac,
    verify on other USB port
    see here:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
    Purchase a new ext. 1TB HD, stay away from WD drives.

Maybe you are looking for