Word to Go doesn't show up in Docs to Go

Hi - I downloaded the most recent version of Documents to Go (1.006.051) and the only options that show up under this application are Sheet to Go and Slideshow to Go. Even when I go into Application Permissions/Documents to G, Word to Go doesn't show up in the list but the others do.
Was my downloaded corrupted, or is Word to Go there somewhere on my Blackberry? I tried to go into Sheets to Go and "check for updates" but it tells me I already have the most current version. Help! Thanks.

Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.

Similar Messages

  • Preview of file doesn't show entire photoshop doc

    Hi,
    When I add a layer to a photoshop file, flatten and save, the preview only shows the layer that I added, not the whole file. See info window below. It causes problems when I send it to other people, they think I haven't sent the correct file. How do I get that preview to update?
    Thanks
    Marcia
    Here is what the file actually is:

    Thank you. I am passing the word around to others here. Will send a message to Apple myself. Maybe if we get enough people to complain…
    Appreciate the response!
    Marcia
    Marcia T. Sinner
    Creative Director
    Zoological Society of Milwaukee
    10005 W. Blue Mound Rd.
    Milwaukee, WI 53226
    414.258.5020 x514
    [email protected]
    Pray for Peace

  • Spotlight shows the result of old files doesn't shows words definition

    Hi all,
    I am sick of my spotlight searchings, firstly it doesn't shows the latest file result as if i create a new document file it doesn't shows its existence and the matter inside that file plus one more than previously i used my spotlight for words definition which came from dictionary now it also doesn't shows that thing as well, from different forums i have search that for re indexing put the hd drive into spotlight preference privacy and than delete that, what i did i drag the hd drive into privacy setting quit spotlight preference and system preference and than open again spotlight preference and in the privacy tab it's nothing there the drive which i just added a few minutes back it was not there so how would i delete it again for re-indexing. i am running mac os x 10.6.6. Pleas help Me thanks =)

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Forgot to eject external hard drive-won't mount, doesn't show

    Hello,
    I just bought a great running G-Technology (500GB) firewire/usb portable hard drive to replace an older much less stable drive. I wanted to copy the files from one to another when the imac disc just stated spinning forever. Having experienced this before I tried shutting off the old drive, but to no avail. So I panicked and shut everything down. Obviously, I didn't eject the new hard drive. After restarting I was able to get the old drive to appear on the desktop but not the new one. It doesn't show in Disk Utility and I've tried going to Go/Go To Folder/type:/volumes and where the icon of the new drive doesn't show up. I've unplugged it, restarted the computer with and without the new drive plugged in. The new drive light is on and power seems to be going to it when plugged in. What to do? I hope I didn't ruin the drive. It's less than a week old. Thanks for any help! Kris

    If you are trying yo use the drive's USB connectivity, "portable" could be the key word. Some drives that must get their power from the computer's USB port ("bus-powered drives") may not get enough power under some circumstances. Their counterpart is the desktop or "self-powered" external drive that comes with its own power brick.
    There are workabouts for your existing drive if it lacks its own power supply:
    1) Try a different USB port. Not all USB ports provide the same level of power. Ports on the keyboard should be avoided--they can seldom power even a thumb drive
    2) Get a self-powered USB hub. It  adds to the power feed for the drive and usually fixes the issue
    3) Get a USB "Y" cable like this:
    1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    It uses two of the comptuer's ports for extra power.
    If you are connecting with FireWire, then the drive is likely faulty.

  • How can I get rid of Browser Highlighter? It doesn't show up in add-ons (either extensions or plugins), nor is it in Windows Vista program list.

    Browser Highlighter updater box pops up every time computer is started & icon shows up in bottom toolbar. It doesn't show up in add-on list, nor windows programs to uninstall. I'm about to switch to another browser.

    https://support.mozilla.com/en-US/questions/711023
    if this does not work look if you find it in:
    C:\Program Files\Mozilla Firefox\extensions '''and delete it'''
    or try search the registry(but be careful) for the word "highlighter" '''and delete it'''
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Template Preview Doesn't show images

    I've created a template but when i go to create a new page
    from the template the preview doesn't show the images.
    Here's what i see
    http://tel3deals.com/pics/contributeproblem.jpg
    When i give it a name and open it it shows the page with the
    images.
    any idea why this is happening ?
    Thanks.

    THis is a real stab in the dark, but at the top of the "next column" there is a small grey arrowhead next to the word "preview" which, if clicked, will rotate to two different positions. One position shows a preview, the other rotated position does not show the preview.
    Try clicking on the arrow.

  • Google Calendar doesn't show

    Please Help! I have inserted a Google Calendar(iframe html code) into one of my iweb pages but it doesn't show in Safari. I get an error in the Activity window that says "too many http redirects" if I refresh Safari a few times it works although it works fine in Firefox. Is there something wrong with the Calendar html code? Is it my webhost? or possibly Safari?
    Thanks,
    Flippy
      Mac OS X (10.4.8)  

    Ah-ha! I figured it out. When you are generating the Html code for your Google Calendar (located under Calendar Settings/Calendar Address/Configuration Tool) do not put too many spaces between the letters and words in the "Calendar Title" as I did C A L E N D A R - O F - E V E N T S.
    It made the url to my Calendar look like this:
    http://www.google.com/calendar/embed?src=mygooleid%60gmail.com&title=C%20A%20L%2 0E%20N%20D%20A%20R%20%20%20-O%20F-%20%20%20E%20V%20E%20N%20T%20S
    Notice the %20 before each letter in my url causing to many http redirects.
    So I just changed the Title to something like EVENT.
    The url looks like this now: http://www.google.com/calendar/embed?src=mygoogleid%60gmail.com&title=EVENT
    I added the newly generated html code and it works like a gem.
    I hope this is helpful to anyone else who might be having the same problem.
    Flippy

  • Exporting file as .doc doesn't show attached image

    I need to create a combined cover letter/resume as a Word doc. So I created a file in Pages with my cover letter and attached a pdf resume image. I created the resume in Illustrator and then saved the Illustrator file as a pdf. This image shows up fine in Pages file. I then Exported the Pages file as a Word doc, but when I go to view the Word doc or when I email the file to others, the attached pdf image doesn't show. I thought maybe I needed to embed the pdf image for it to show up in the Word doc, but can't find any info about it on the web. I really want to use the file I created in Illustrator because it contains some graphics that pertain to some of my skills listed in the resume. Any information would help.

    lilv
    Welcome to the forum.
    What do you mean by "attached"?
    In Pages you just drag the .pdf into the page and it appears as a graphic and that exports correctly to Word in a quick test I have just done.
    Peter

  • JCheckBoxMenuItem doesn't show the checkbox

    Hi,
    I'm trying to add a JCheckBoxMenuItem to a popup menu. I'm using jdk1.4 and the Windows L&F. The checkbox portion of the JCheckBoxMenuItem doesn't show up; all I see are the words associated with the check box. Any help would be greatly appreciated.
    Thanks,
    Angella
    private void createPopup(Point p) {
    JMenuItem item;
    popup = new JPopupMenu();
    JCheckBoxMenuItem checkItem = new JCheckBoxMenuItem("Show Labels");
    popup.add(checkItem);
    if xxx== null || xxx.equals(""))
    checkItem.setEnabled(false);
    checkItem.addActionListener(new ActionListener(){
    public void actionPerformed(ActionEvent e){
    JCheckBoxMenuItem temp = ((JCheckBoxMenuItem)(e.getSource()));
    setShowLabels(temp.isSelected());
    checkItem = new JCheckBoxMenuItem("ShowTypes");
    popup.add(checkItem);
    if (xxx == null || xxx.equals(""))
    checkItem.setEnabled(false);
    checkItem.addActionListener(new ActionListener(){
    public void actionPerformed(ActionEvent e){
    JCheckBoxMenuItem temp = ((JCheckBoxMenuItem)(e.getSource()));
    setType(temp.isSelected());
    popup.show(this, p.x, p.y);

    Angella,
    Did you ever overcome this limitation in the windows l&f. I would also like to show an empty checkbox on the menu item to indicate that the menu item is "checkable". Did you find a way to do this?
    Thanks,
    Troy

  • Used to zoom computer screen while using apple tv, since update, my screen is mirrored, but zooming doesn't show up

    I used to be able to zoom in and out on my computer screen while using apple tv. For example, zoom in on a certain URL or ribbon. Since the update, my screen is mirrored, but when I zoom in and out to show my Word ribbon up close, etc., the zooming doesn't show up. My zoom preferences are set on computer.

    You might try restarting your device, your router and your Apple TV.

  • Search in Mail doesn't show results after Migrating

    If I search for a word or an adr. in Mail nothing show up. Unless I've just read the mail. Like that newly read email is the only one being searched in ..?
    This happened after moving my user account to a new MacPro with Migration Assistant.
    (first a clean install of 10.7 on a new disk in bay 1 on the "new" MacPro and updating to 10.7.5 - Starting up from the new disk with my "old" HD in bay 2 on the new machine and using Migration Assistant to move all my data over to the new disk in bay 1)
    Same Mac OSX version, but MacPro version from 1.1 to 3.1
    Also Spotlight doesn't show results.
    Is there a way to make a new "search cache" or whatever that overview file is called ...
    Suddenly now, when not getting any search results, I see how much I use search in Mail and Spotlight ... !
    Thanks

    Try posting this in the 10.7 Mail forum. You'll get more help there.
    DALE

  • Artwork on ipod but doesn't show up when synced to itunes

    I have a first gen. touch and I just downloaded the latest version of iTunes onto a new computer running Windows 7. Everything is working fine expect that when the touch is synced the artwork on the ipod doesn't show up in the itunes display window. The artwork in my itunes library displays, the artwork is displayed when using the touch...but itunes won't show any of the touch artwork in the artwork window. In other words all the artwork is there but itunes won't display it when ipod is synced.

    I'm experiencing the same thing. Happened after I tried activating iTunes Match (not sure if it's related though).

  • Itunes doesn't show that I purchased a tv season

    I just purchased Psych season 7 SD on itunes. I only downloaded the first episode and was going to download the others later. When I go to that season's page, it doesn't show that I purchased it. With other television shows I have purchased, I could download the season, and then the word download would take the place of the episode price. This isn't happening this time. I don't want to have to pay for the season again. I even opened it up on my laptop, and it still doesn't show up as purchased. Any suggestions?? Thanks

    If anyone else is having this same issue, I found a solution. I activated iCould on my computer. A little while later I checked iTunes and the episodes appeared in my library with a cloud beside them. I clicked on the cloud to download them.

  • After I have deleted a file from my iphone, it still shows the song with a download button? Is there a way to get rid of this totally, so it doesn't show at all?

    After I have deleted a file from my iphone, it still shows the song with a download button? Is there a way to get rid of this totally, so it doesn't show at all?

    The banner usually indicates that the memo is "Paused." If you go back into voice memos, touch the word "Done" beside the big red pause button, give it a name, then it will show in a list. Touch the memo in the list then touch the trash can icon that should appear.

  • HT203167 A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps.  Where is it and how do I find it?  I believe I originally purchased the film on my 1st Gen AppleTV.

    A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps.  Where is it and how do I find it?  I believe I originally purchased the film on my 1st Gen AppleTV...other movies show up. Help.

    It was Love Actually. It's been in my library a few years but is now missing. It's odd...it isn't even in the iTunes Store anymore. I think there is a rights issue because a message appeared in the store saying it wasn't available at this time in the U. S. store. Still, if I bought it years ago it should be in my library or I should get a refund....

Maybe you are looking for

  • Is there a way to sync mail across multiple computers without using .mac?

    I'd like to be able to use either of my machines to check/respond to email, and have both of them be updated with both incoming messages and my replies. Is this possible outside of using a .mac account? I'm using 10.4.6 and also the latest version of

  • Pages not working after 10.6.2 update - SFWordProcessing plugin missing

    Can someone suggest a solution? After updating both iWorks and then applying the 10.6.2 update, Pages simply will not load. This is the header of the error message: Process: Pages [156] Path: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages Ide

  • Update 9.0.1

    If my server is at 9.0.1 with no hot fixes and I want to get to 9.0.1 up to date with the latest hotfixes up to apsb13-27. Do I install the cumulative hotfix 4 for coldfusion-901 as described in http://helpx.adobe.com/coldfusion/kb/cumulative-hotfix-

  • BB Pearl 8130 "access not allowed!" when trying to download Blackberry App World

    Hi, well I am trying to download blackberry app world onto my blackberry pearl 8130 and whenever I try to download it it goes through the language prompts but then goes to a page with "access not allowed" My device software is v4.5, I am currently in

  • Error opening vty no more tty lines error

    Hello Community, Whenever I attempt to run a Tcl script I get the following error message: Tcl policy execute failed: cannot get pty for exec: Error opening vty no more tty lines I inreased the number of vty lines to 10 but every I run the script it