Word to Pages translation crash EXE SEGVS:I uses Pages and a colleague uses Word. When he send me a document and I open it, the document crashes and I get the EXC_BAD_ACCESS (SIGSEGV) MESSAGE. Bad Accesss at 00000006574785. What's up? message
As in the heading, my problem arises when using pages to opening documents my colleague, working in Word, sends me. I get the crash message set out above. This only happens with this particular document, even after we unformatted it, saved at as RTF then reformatted it again (I realize these issues may be unrelated).
Any suggestions appreciated.
There is obviously something in that document that is corrupt, perhaps a font. A couple of things to try would be to open it in TextEdit or an Office clone such as LibreOffice.
Similar Messages
-
When i'm exporting to quicktime i get a message that IMovie crashed or I get a heap zone message
I'm trying to export a movie to quicktime and it wont fully export because IMovie crashes or i get a heap zone message. WHAT DO I DO PLZ HELP!
I'm using IMovie 11You may have insufficient free space on your hard drive. You need at least 20% or 30GB - iMovie needs lots of space for swap and temp files to perform that operation.
-
I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?
I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%% -
Tried to install iTunes with Win 7 Pro and I get an error 2 message that tells me to uninstall iTunes and reinstall, same error occurs. What's up?
Hello, rodneywjr.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting articles that I would recommend going through when experiencing this issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Cheers,
Jason H. -
I'm trying to start Premiere Elements and am getting an Error:1 message
I'm trying to start Premiere Elements and am getting an Error:1 message@
That's too bad.
If help is desired, try providing details of the situation or search the forums for the issue yourself.
We are not mind readers. -
ITunes won't launch and I get a strange error message-
My iTunes will not launch and I get this strange error message: The iTunes application could not be opened. The disk could not be read from or written to. But I have no problems with the disk it is on, which is my harddisk. Help, help, help…
I have now tried a billion things: None of them work. I still get the same error message, when I try to launch iTunes after logging into my user profile. However, I can launch iTunes 6.0.1 if I create another userprofile on my computer and log into that. But that isn't very helpful. I have also tried removing iTunes 6.0.1 and installing iTunes 4.7 instead. I can actually launch that. However, I cannot connect to the iTunes music store using iTunes 4.7 nor can I play any of the music purchased from the iTunes music store. What am I to do, except curse Apple for creating a version of iTunes that many people seem to have problems with?
-
Yosemite, messages, preferences are grayed out. It opens but the window for messages is blank.
Yosemite, messages, preferences are grayed out. It opens but the window for messages is blank. Can't click on anything.
Hi,
You appear to have the wrong end of the stick as they say.
Just starting your computer needs certain Fonts to be present to display the text you are likely to see.
Most of those needed to do this are in the Hard Drive icon/System/Library/Fonts.
Some apps require different Fonts and in the case of Messages this is AppleGothic (all one word) and is found in Hard Drive/Library/Fonts.
You would normally use the Apple App called Font Book to check these Fonts are working properly.
Prior to the Yosemite version of Messages (still called Messages 8 like th Mavericks version) you could change the Font use in the actual Messages in the app.
On a Character or word or Sentence basis there was the Format Menu.
There was also a Pane in th Preferences called Messages that let you choice the Font, the colour of the text and the colour of the balloons for Out going Messages and also Overriding the incoming ones.
You can no longer do this as the Preferences Pane and the Format Menu have gone.
7:20 pm Thursday; December 11, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
My husband and I share an Itunes account so use the same email address and password. Our iphones are now connected and we get each other's messages and share each other's contacts. How can we stop this happening?
A couple of different approached:
Create a second AppleID for one of you that includes the email address and phone number you wish to use for messaging, but do not apply it to the iTunes and app store (just keep the current one). My wife and I do this and it works quite well. Also allows for easier syncing of Contacts , notes etc. using icloud if you wish to do that.
Add additional emails/phone numbers to the existing account and change the Send/Receive settings for Messages. this will not fix the Contcts isues for you however. -
I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?
"Sounds like you guys are using the same apple id for imessage. You will need to create a separate id for you wife. OR go to settings - message - receive&send and make sure your phone number is the default for both you and yoru wife.
-
When I send an email with Mail, I often confuse the account which I'm using. The result is that I send a message with the wrong account! Is there a way to avoid this (for example a reminder before the email is sent)?
Hi, thanks for the answer, I did that already. Unfortunatly this doesn't help me at all, as I often forget to check the menu. For me composing the message is writing the text, the subject, the person to who is addressed and than press "send".
I often forget to check the "from", and this is a problem because the software select itself one of the accounts.
Isn't there a way at least to put as a default a blank field instead of one of the accounts? or an account which doesn't work so if I forget to specify the "from" I will be rnotofied that the message can't be sent.
I guess this could be a rather common problem for many people!
Thanks
Sergio -
On my computer I apply for unemployment benefits at the Unemployment Insurance Agency web-site. Just recently, when I log in for benefits, I get to the second page, and I get automatically kicked back to the log-in page. I went to my local library, and I do not have this problem. I do not understand why I can log in, get to the second page, then I click proceed and I have to start all over without ever getting to the third page. Can someone figure this out?
Yes AT&T is my ISP. I use DSL. Currently I am not at my home address. I am currently on a cable modem on COX.com.
I am also receiving a warning message "WARNING: Parental control appears compromised!". -
When I attempt to connect to iTunes Store, I receive the following error message: An unknown error has occurred (0x80090318). Any help appreciated!
Hey there Dan256162,
I understand that you are receiving a specific error code when attempting to connect to the iTunes Store, error 0x80090318. I have an article for you that references this code and links you to another article for troubleshooting to address this issue. Here is the article that references the error code:
iTunes: Possible iTunes Store errors - Apple Support
http://support.apple.com/en-us/HT203174
And here is the linked troubleshooting article that will help you resolve the issue:
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
http://support.apple.com/en-us/TS4123
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
I am trying to download the mountain lion software which I purchased and downloaded successfully in my air book, in to my desktop and I get an error 403 message saying that an server error ocurred during downloading
Implies that the DL is hosed and necessitating DLing it again.
-
When I send an e-mail to a group address, from my address book, I get an error messageI get an error message that one of them is not a valid e-mail address, although I have used it alone without any problem.
See https://support.mozilla.org/en-US/questions/1018363
-
Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.
I have a similar problem, Safari cannot load a complet page. It stalls e.g. ["38 of 42"]. sometimes it will complete loading after a long wait. just as often it will never complete the page,
The same thing happens in chrome and firefox but safari on my iPad works just fine.
I have the latest version of everything
I assume there is a system problem but cleaning up permissions does not help
Maybe you are looking for
-
My Illustrator CS6 will not launch
I was working with an AI file in Illustrator today. Everything was working fine and I made some edits and placed the file in my inDesign document. I saw another change I wanted to make so I right clicked on the file and selected Edit with Illustrato
-
Getting "java.io.EOFException" while reading a file
I am getting this error when trying to upload a file through the html form to the server. I am using Struts form and the FormFile to get the file contents. After getting the file contents I write to a file in the server path. This works perfectly wit
-
I lost all my contact number can i retrive it back
I've lost all my contact numbers after plug into itune can i retrive it back kindly advise
-
Clearing Doc has been reversed, but still assigned to Original Document
Hi, Here's the condition: - Clearing document has been reversed, but instead of using FBRA, user use FB08. - Now the document still assigned to this clearing doc. - In FBL5N this doc is open (in BSIS table it does't have clearing doc also) , but when
-
Online application web forms (steps and how to)
hello guys. i hope to get there soon. but so far i still need you help. and thanks again here it is. as part of a MIS technician group i am assigned to take care of online application form to get the paper work out of commision. the problem is how to