Word to the wise: title 3d and autorender function

If you have the auto-render function turned on, open title 3-d and walk away for lunch, you'll freeze FCP.
You get the little "Auto render complete" box, but you cannot click OK because it comes from FCP, which becomes idle when you open 3d.
Possible lessons: don't eat lunch. Don't use auto render. Don't leave title 3d open. Eat in the edit room and keep working. Save early, save often.

I've had this happen and I think I got out of it by pressing return - couldn't click on it, but I could press return or ESC. Nasty trap, tho...
Patrick

Similar Messages

Word to the Wise - Privacy Issue

AT&T appears to quickly recycle old phone numbers these days, but it appears they do not necessarily disable the online account that was established by the previous owner of the number. It is possible that your account information may remain accessible by the previous owner of the phone number.
Sounds odd doesn't it? But after cancelling an AT&T account recently, I found that the online account could still be accessed using my old cell number and password even though the number had been reassigned to another customer. Word to the wise ... make sure you set a new password for your online account!

I never had any issues getting my ATI card to work under linux. The new ATI drivers are much improved over the previous version. Yes, I had to recompile the kernel so that AGPGART was a module but that isn't such big of a deal. I first installed the ATI drivers under Slack w/o any sort of package management using rpm2tgz.
The one thing that bugs most people about the ATI linux drivers isn't that the module is difficult to install but that the performance isn't up to par with their windows offerings. nVidia drivers are very close on both platforms. If I had a newer ATI card I'd probably stick with it before putting up more money to get an nVidia card (get an older GeForce 4 Ti or GeForce 6) right now. But, I'll probably always buy nVidia for future graphics cards. When I build my AMD64 box down the road it will be powered by nVidia graphics unless ATI improves by vast amounts in the driver department. FYI, I'm using an nVidia GeForce FX 5700 my current Athlon XP box and it isn't even close to being the card my old Radeon 8500 is for Windows, but under linux it's much better.

I just transferred music from a desktop to a laptop to put on itunes. After this exhausting process of renaming and renaming unnamed tracks, when I play one on itunes the song title disappears and though the song plays, I have to rewrite name of song.

I just transferred music from a desktop to a laptop to put on itunes. After this exhausting process of renaming and renaming unnamed tracks (b/c itunes made me rename them even after I rewrote the names in the music folder of my computer even though I hadn't put the songs onto itunes beforehand when the tracks were unnamed), when I play one on itunes the song title disappears and though the song plays, I have to AGAIN rewrite the name of the song. Is there an actually answer out there???!

Welcome to the Apple Community.
i guess you are referring to iTunes Match. It sounds as though you haven't downloaded all the content and are trying to play your music over a poor connection.

Why do the "SAVE", "SAVE AS" and "UNDO" functions of InDesign CS6 stop working after a short time?

Why do the "SAVE", "SAVE AS" and "UNDO" functions of InDesign CS6 stop working after a short time?

Normally they don't. You might have some sort of problem on your system, possibly a conflict with other software, or corrupt ID prefs or application. Trashing the prefs is easy, and good place to start: Replace Your Preferences
It will help if you tell us the OS version, whther you've installed the 8.0.1 patch, and how you are trying to access the commands, and what happens when you do. Is this isolated to one file, or does it happen with all files?

Could you please tell me how to turn off the email sign-in and password function when I open Itunes on my computer - I don not wish to sign in every time

could someone please tell me how to turn off the email sign-in and password function when I open Itunes on my computer - I don not wish to sign in every time

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Does the RT Image create and apply function include FPGA bitfile

Hi,
    Does the RT Image create and apply function include FPGA bitfile? Does it deploy FPGA bifile to the FPGA target automatically?
    Thanks!
    Tom

However, can't you do the following:Use open FPGA VI reference within your RT app and point it to a bitfile then build and deploy the RT exe. After this, take an image and shouldn't the RT exe hold all information with regards to the FPGA that you need?
I may be wrong, but I hope not since I have to allow customers to update the cRIO without the project to deploy any changes
CLA, LabVIEW Versions 2010-2013

I have a printing cd cover problem the track titles overprint and I can't read the track titles, what can I do please

I have a problem when printing cd covers, which has only just started happening, the track titles overprint so I can't resd them correctly, what can I do to fix this please.

When I try and open my original catalog, I get the following error:
Lightroom encountered an error when reading from the preview cache and needs to quit.
Lightroom will attempt to fix this error the next time it launches.
But, when Lightroom opens, the error shows again and the program crashes. I created another catalog that does open, but occasionally the same error occurs and the program crashes. This is happening many times per day.

The latest version of iTunes doesnt allow me to click on the song titles heading and locate the desired song from my Purchases. Are any others experiencing this?

Is anyone else having difficulty searching for their desired song using the latest version of iTunes? it used to be that I could click on song titles and just type in the first three or four letters and it would go straight to my song. This is no longer the case.

Hi Hale,
Welcome to the Support Communities! The resource below provides an overview of the new iTunes 12 interface. If you are looking for a song in your library, you can click on the My Music tab at the top of the page. At the top-right corner of the window, choose to view your music by Song, and sort by Name see an alphabetcial list of your music.
Using the new iTunes - Apple Support
http://support.apple.com/en-us/HT203128
iTunes 12 includes dedicated icons for music, movies, or TV shows, which make it easier to get to wherever you want to go in your library with a click. You can use the same controls to switch media types whether you’re browsing the iTunes Store or browsing your library.
You can even choose the media types you always want to see. To access more media types, click the More button (three dots) in the upper-left corner and click Edit. Select your favorite media types in the pop-up menu, then click Done.
List view
To view your music by Song, Album, Artist, Composer, or Genre, click the current view under the Search tool in the upper-right corner. A pop-up menu of other views will appear. When you select one of the views in the menu, you'll see additional options for the view you're currently on, like Sort By Title or Rating.
I hope this information helps ....
- Judy

A word to the wise.

Do not upgrade your bios on a 7030 board just because an msi tech tells you to.Please search this forum first as some of the msi techs only know 1 word, RMA and are either unwilling or unable to help sort out a problem i' m glad there is no msi tech over this forum or all we would do is RMA.

unfortunately, most people don't become aware of the existence of this forum until after the event, and they are searching for help...
its not just MSI tech.... if you buy a game and you experience a few problems with it, the first general advice you will get from developer/publisher's official website is to "update BIOS and drivers" - ie a general stock reply, which isn't really of much help at all, if you have an underlying hardware problem that even the most stable BIOS and drivers can't address...

The Oracle database engine and forms - functionality query

I have an interest in establishing how the Oracle System Catalogues cope with particular changes. I have never used Oracle, but I have carried out the same test on another RDBMS. If I had access to Oracle I would have carried out this test myself.
The test goes as follows.
Create a new database.
Create a new simple table, with just a few columns.
Create a form for the table, and add a few rows.
Rename the table or a column – if you can’t, then the RDBMS is Code Class.
If you can rename the table or a column, then do so, and invoke the form that you used before changing the table or column name. If it doesn’t work, the RDBMS is Code Class; if it does then the RDBMS is Identifier Class.
In an Identifier Class RDBMS changes of column or relation/table name will not interfere with the operation of any form already in place based on that table.
I'll be very grateful if anybody can give me a definitive answer on this, either through already having explored the issue or by running the test.

Hello again William,
now it becomes challenging. The conceptual shift required to get to Identifiers is similar in scale to the shift involved in going from Newtonian Mechanics to Quantum Mechanics or from Cartesian Space-Time to Special Relativity, with the added proviso that the concept of identity built into the Relational Model is implicit rather than explicit as respectively in the cases of Newton and Descartes.
Your "you are not expecting.." sentence is a perfect statement of where I am - I'm not looking for the RDBMS to have any impact on application code - that would be a truly ridiculous expectation; this would make some crazy version of a cascade update, with remoteness as an extra complication. In IC applications (including RDBMSs) cascade updates are never needed.
The next sentence also has a very strong aspect ("allow applications ... to .. compilation time) but is weaker in the "simply hoping" and "might". I havn't developed a RDBMS that does that, although I hope to participate in such a development exercise soon, but I have developed an application that does exactly what you say. Binding/joining depends on something permanent rather than something transient, where names and abbreviations are all transient, as are all pure attributes once they have had identity (and relative position) stripped out them.
In your next paragraph I disagree that there is only a shift of problem. The dropping of whole tables or the deletion of columns is on a different scale from the changes that I am talking about, which do not but could get sensibly reflected in the current Code Class RDBMSs and applications. I'm aware that no application development tool allows what you say, (the problem is actually in the system tables) but I have achieved the completely analogous result in the application that I have developed.
Your comments about the AREAS table precisely highlight the issues of permanence and transience on which all of my work sits. What are you doing when you drop the table and replace it with a table with the same name? Do you want to think of the "new" table as the SAME as the "old" table or is it something entirely DIFFERENT, in which case giving it the name of a table that you have dropped might easily result in serious confusion.
If the new table is doing the same conceptual job as the old, then I would certainly want the continuity of its existence to be explicitly preserved, via the enduring identifier value (which reflects the fact that we are thinking of the table as having continuity of existence). So I would alter the table rather than dropping it and recreating it.
If I have ended up in a cul-de-sac (I've been there) and I have to throw away the table and all its related operators, then that is what happens if I don't get it right first time. I don't want any continuity, and I'll have to junk all the form and report etc operators unless I want to preserve some bits for my next attempt. I certainly won't expect anything to continue to work, because there is nothing to work on.
Your use of the expression "fancy name-independent code" is disappointing in all respects. I experience your use of "fancy" as sarcastic, and my full expression for "name-independent code" is "attribute independent and relative position independent identifier" whose acronym is "airpii". This is not just name-independent, it's independent of all other attribute and relative position values in the same row. It's certainly not a code: the word does not have a place in Identifier talk, since it has been replaced by abbreviations and acronyms, which are undiluted attribute; they don't have identity mixed up in them as with the "codes" of the "Codes Mistake". (In RDBMSs the mistake is called the "Names Mistake" because table and column names bear identity as well as attribute; there are no codes.)
I very much hope that our dialogue can continue - other dialogues have stopped at this sort of stage. On my website www.identifiers.org there is a page called "Identifiers - a Visual Representation" that sets out to communicate identifiers visually, that I created to communicate this entirely new concept in a different way after another database professional got stuck. I understand from another forum user that there may be a problem getting hold of the pdf file concerned if using Firefox - please let me know.
I have an RDBMS application on a SCO partition on a PC that proved identifiers for me. I can input a work instruction successfully using one set of abbreviations (the codes of old) and the stored instruction row makes no reference to the abbreviations that I have input - there's just a single identifier value in the appropriate column of the work instructions relation. The relationship between the abbreviations and the identifier value becomes clear from rows in other relations.
If I then want for some good reason (some purely operational entity has been renamed) to change one of the abbreviations when also changing the full name, I can do so in the relevant relation - this is an abbreviation rather than a code that I am now dealing with; I can change it because it's not also used for joins.
When I input the next work instruction I use the new abbreviation rather than the old; the form is entirely happy and works fine, and exactly the same identifier value ends up in the appropriate column of the work instruction relation. So I have input a different set of values to achieve exactly the same result. Is this crazy? No! This reflects the ways in which we naturally think and talk, and at last the application makes sense - I don't have to use a code that does not tie up with the name. The core of the issue is that I have been able to reflect external CHANGE fully and successfully in the database. We are surrounded by change, but RDBMSs and applications currently do not allow us to process it properly.
I acknowledge that no application development tool works in this way at present, but that's the fault of the architecture of system tables, which I intend to remedy. One can't remove the Codes Mistake from these tables.
However Identifier Class Applications can be developed using Code Class RDBMSs, because the developer has control over the application relation design, which can be carried out under identifier principles. I redeveloped from relation design scratch a very successful application, so I had a good placebo. In my environment I needed a 4GL form development tool so that I could get identifier values (and other attribute values) from attribute input rather than being limited to searching for a "code" to get other row values.
If seeing is believing and of interest, then we might arrange for you to see the IC application working.
Yours,
George

How to use the palette or drag and drop functions in netbean?

Is there anyone who can help me out on using drag and drop function in netbean to design GUI inteface..??
Is palette is the tool that can be used to drag and drop.??
thank you in advance.

I actually really like the GUI builder in netbeans. I used to be a big eclipse user so I am very familiar with coding GUIs by hand, and most of what I do involves GUI's or at least swing.
At first I hated netbeans, I hated that I couldn't edit the code most. Then I decided to take a deep breath and really examine the issue. What I discovered is that most of the edits I wanted to make but couldn't really weren't the right way to be doing it in the first place, for the rest the code is actually really easy to change you just have to know how.
Now my palette is huge, probably about 250 objects in it organized into sections that work for me. Basically if I want a object to do something that is not already in the palette I simply write a new object and add it to the palette. I started small like with rounded buttons/progress bars, and as I got comfortable I now have some fairly advanced objects like grids, isometric grids, alpha composits, an animated hourglass countdown timer, and an animated "loading/activity" indicator that is not tied to a progress indicator.
The main reason I stuck with the netbeans drag and drop GUI builder is it's layout manager is really a very nice layout manager, you couldn't pay me enough to go back to eclipse or codeing GUIs by hand, as I can now do in one day what used to take me several weeks.
So what I am saying is stick with netbeans and the drag and drop, it sucks at first, but once you get to a point where you are comfortable with it and adding to the palette it will become a great tool.
JSG

Where is the page title field and the property inspector? [subject edited by moderator]

Why do I not have the title window in the tool bar, and why do i not have the inspection panel at the bottom of my window

A word to the wise about the PBO of a docked tree

I was just having an interesting discussion with Rich H and Max B over in ABAP Objects about "re-entrant" docked trees. ("Re-entrant" in this case means you may have to rebuild the same tree control from a different root during the same execution of the program - this is not exactly what "re-entrant" used to mean to a CICS COBOL programmer, but it's close.)
Anyway, suppose you pop a large ABAP OO tree the correct way - with just the root and its immediate children in the node table. (Then as the user clicks on an expandable folder, you find its children and insert them, etc.)
Then you have to be very very careful if the tree is docked on a screen with its own PBO, because the PBO will actually fire each time you click on a folder to expand it.
Why do you have to be careful?
Well, suppose you're in the situation I was telling Rich and Max about - where the user can back out of the tree screen and come back into it with a different "root" selection.
Then you have to distinguish between two different cases in which the PBO will fire - the case where you want to pop a brand-new tree and the case where you want to continue pop new levels of an existing tree.
As I said, it never occurred to me that the screen PBO would have to fire each time the user did nothing else except expand a folder in a tree on the screen.
So I thought this might not occur to others as well, and that's why I'm mentioning it while we're sitting here having coffee.

I never had any issues getting my ATI card to work under linux. The new ATI drivers are much improved over the previous version. Yes, I had to recompile the kernel so that AGPGART was a module but that isn't such big of a deal. I first installed the ATI drivers under Slack w/o any sort of package management using rpm2tgz.
The one thing that bugs most people about the ATI linux drivers isn't that the module is difficult to install but that the performance isn't up to par with their windows offerings. nVidia drivers are very close on both platforms. If I had a newer ATI card I'd probably stick with it before putting up more money to get an nVidia card (get an older GeForce 4 Ti or GeForce 6) right now. But, I'll probably always buy nVidia for future graphics cards. When I build my AMD64 box down the road it will be powered by nVidia graphics unless ATI improves by vast amounts in the driver department. FYI, I'm using an nVidia GeForce FX 5700 my current Athlon XP box and it isn't even close to being the card my old Radeon 8500 is for Windows, but under linux it's much better.

Word to the wise about ATI

Please see the forum Documentation Discussion ATI Radeon and Kernel2.6 (Updated).
This discussion has 29,564 viewers, a poll to vote on its usefulness, a total of 208 replies and 14 pages of them.
The indications are that the ATI modules are a bear to install and run.
The evidence indicates that the stock kernel will not permit the loading of ATI drivers. The kernel has to be hand -made by the user.
This is stated in the forum replies....can you believe it is a fact or just a wily-nily comment?
The sheer number of difficulties encountered indicate the poor definition of the problem in the first place.
I predict this is only the beginning of even further problems as the archlinux kernels are pacman -Syu installed.
I have two ATI modules I will send back to ATI...these guys are in Canada,yet!!!!
I have to sign-off now while I go to Fry's to get a good video card.
Bye-Bye ATI!!(Care to join me?)

I never had any issues getting my ATI card to work under linux. The new ATI drivers are much improved over the previous version. Yes, I had to recompile the kernel so that AGPGART was a module but that isn't such big of a deal. I first installed the ATI drivers under Slack w/o any sort of package management using rpm2tgz.
The one thing that bugs most people about the ATI linux drivers isn't that the module is difficult to install but that the performance isn't up to par with their windows offerings. nVidia drivers are very close on both platforms. If I had a newer ATI card I'd probably stick with it before putting up more money to get an nVidia card (get an older GeForce 4 Ti or GeForce 6) right now. But, I'll probably always buy nVidia for future graphics cards. When I build my AMD64 box down the road it will be powered by nVidia graphics unless ATI improves by vast amounts in the driver department. FYI, I'm using an nVidia GeForce FX 5700 my current Athlon XP box and it isn't even close to being the card my old Radeon 8500 is for Windows, but under linux it's much better.

The effect of cube and rollup function

1. For under 500,000 in Oracle 9i, rollup is faster than cube.
But above 1,000,000, cube is faster than rollup.
Right?
2. Why do rollup(a) and cube(a) all have a parameter?
3. Under only one parameter, the compute process of cube and rollup is not the same, right?
Thx.

>
1. For under 500,000 in Oracle 9i, rollup is faster than cube.
But above 1,000,000, cube is faster than rollup.
Right?
>
Rollup summarises data differently to cube, so to say one is faster or slower than the other is not a question one should consider necessarily.
The main consideration should be in what format you would like the result set to be in.
http://download.oracle.com/docs/cd/E11882_01/server.112/e16579/aggreg.htm#DWHSG8609
http://download.oracle.com/docs/cd/E11882_01/owb.112/e10935/dim_objects.htm#WBETL03002
>
2. Why do rollup(a) and cube(a) all have a parameter?
>
The parameter(s) refers to the Grouping against which the data is summarised.
The Oracle documentation states the following:
>
CUBE takes a specified set of grouping columns and creates subtotals for all of their possible combinations
>
So both rollup and cube could summarise across a group of column(s).
>
3. Under only one parameter, the compute process of cube and rollup is not the same, right?
>
Correct, depends what you want to summarise against.

Word to the wise: title 3d and autorender function

Similar Messages

Maybe you are looking for