Word won't let me open files

Hi all, i can not open any files in my word, or when i download a piece of work for my sons school, it just keeps coming up 'no data', can anyone help please. Many thanks.

You have 2 versions of Pages on your Mac,.
Pages 5.5.1 is in your Applications folder.
Pages '09 is in your Applications/iWork folder.
You are double clicking on a Pages 5 file and it is opening in Pages '09. This is happening because all Pages files have the same file extension: .pages.
Pages '09 can not open Pages 5 files. Right click on files and open them with the correct version.
Peter

Similar Messages

Codec Problems, won't let me open file on another computer due to codec problem??

Codec Problems, won't let me open file on another computer due to cedec problem??

Start the computer from the installation disk and perform Repair Disk and Repair Permissions using Disk Utility

My excel won't let me open files sent from others

"Microsoft Office Excel cannot access the file <filename>. There are
several possible reasons:
- The file name or path does not exist.
- The file is being used by another program.
- The workbook you are trying to save has the same name as a currently open
workbook."

You will probably be better off asking your question in this forum, where Microsoft users support each other.
Best of luck.

The new updated version of iMovie 10 won't let me open my previous files I created before the update today. I have a wedding that I'm trying to finish and deliver and now I can't because that file version won't open. I keep getting an error message

Hello,
Please help me figure this out. I'm very unhappy at the moment. I'm fustrated and don't have any idea how to revert to the original version before the update was done on iMovie 10. I NEVER hated APPLE until NOW!! I love APPLE products and apps so please help me stay in that mindset. So I worked on some movie projects when I got my macbook pro 6 months ago. I update reguarly. I saw the update prompt and honestly, I did not think I would have ANY issuess with opening my previous files that I created only a few months ago with this updated version.The new updated version of iMovie 10 won't let me open my previous files I created before the update today. I have a wedding that I'm trying to finish and deliver and now I can't because that file version won't open. I keep getting an error message and the iMovie app closes. Last night I saw the file and tried to open it but no luck. Error message came up again. I reboot and turned off my laptop for the evening and tried again just now but nothing!! I need that video. My job depends on it! I worked so hard on this wedding video and now it's lost and won't open. I work another job and don't have much time. I really don't want to start all over again. Please help me. Thanks so much for your assistance.
Fustrated APPLE customer
Jolly A. Rupp

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

Acrobat/adobe won't let me convert files

It keeps telling me I have to buy the program. I pay for the Cloud on a monthly subscription and I really need to get this file converted so I can make changes for a meeting tomorrow!

I am logged in and am registered. It will simply not let me convert most PDF's to word, whether I open it with adobe, acrobat or pro 11. When I download documents from the school library, I can convert them, anything else I can't. And I really need to. What else can I try?
Virginia
Date: Tue, 21 Jan 2014 06:34:58 -0800
From: [email protected]
To: [email protected]
Subject: Files.Acrobat.com Acrobat/adobe won't let me convert files
    Re: Acrobat/adobe won't let me convert files
    created by Ajlan huda in Files.Acrobat.com - View the full discussion
When you close Adobe Acrobat and launch it again if this is not registered yet.
It will ask you to either use serial number or you may see option subscribe .
You can choose subscribe or register and use your Adobe Id (email id registered with Adobe). As you said you have already purchased subscription then you should be able to activate the subscription the moment you
login with your Adobe id.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6035540#6035540
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6035540#6035540
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6035540#6035540. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Files.Acrobat.com at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Word won't let me save or close documents

Hi, my Word won't let me save or close pages- most of the tool bar at the top is greyed out and when I click file the only options are 'open recent' and 'share'. Does anyone know how to fix this? I've got a document open and I can't close or save it.
Thank you!

Word - Microsoft Support

Firefox won't let me open more than one window at a time. how do i fix the problem

Firefox won't let me open more than one window at a time. It use to allow me to open multiple windows before but for no apparent reason it stopped. I uninstalled it and re-installed but I'm having the same problem. How do I fix the problem
== This happened ==
Every time Firefox opened
== several days ago

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

How can I open a new page (using "Pages") when I already have another page open? It just keeps reverting to the page I have opened already and won't let me open another one?

How can I open a new page (using "Pages") when I already have another page open? It just keeps reverting to the page I have opened already and won't let me open another one?

To make a new document, go to File > New From Template chooser and choose the type of document you wish to create.
To add a new page to an existing document go to Insert > Sections > Blank.

My computer crashed while exporting and it won't let me open that catalog

My computer crashed while I was exporting photos and now it won't let me open that
catalog. It says keeps telling me another application has that catalog open and I need to quit the other copy before it will open it. The problem is I don't know what program has it open or how to close it. Help please! It will let me open my other lightroom catalogs.

Check your catalog folder. You will find a file called catalogname.lrcat.lock in there, which you can delete. Then restart LR.
Beat Gossweiler
Switzerland

Safari isn't recognising any websites at all. It is saying "can't verify certificate or server". I have reset my router, reset the Mac Air and still nothing. If there are updates it also won't let me open the App Store...

I Have tried everything and it still won't let me open anything in Safari. I have reset the Mac and router. It's just not working.

This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
           ▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
          Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
          Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
          File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
          Show Expired Certificates
select it. Otherwise it will show
          Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
          Secure Sockets Layer (SSL)
select
          no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
          When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
          Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
If that's not what you see, post the contents of the window.

Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE

Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE

I just got my mac a month ago so go easy on me but I was just working with the pages that was already on it, and then today I know it updated, and now I am unable to open a lot of my documents!:( Idk what you mean by the icloud version lol sorry! As for the version, when I open pages from my apps and click 'about' it says version 5.1? And when I open the document it just goes grey and kind of blinks and doesnt open? No error message or any indication of why it will not open now when I for sure have opened it in the past! Andddd for the OS X I think it is 10.9.1 ??

Macbook Pro won't let me move files to HD without authentication. Also when I try to move files from the HD to the desk it just copies them.

My 2013 Macbook Pro running Mavericks 10.9.5 won't let me move files to the HD without authentication. So I have to keep putting my password in. Also when I try to move files from the HD to the desk it just copies them. This just suddenly happened last night. Anyone have any ideas what it could be? Thanks

See http://support.apple.com/kb/HT1229?viewlocale=en_US - I doubt that it will solve your problem, though. You may want to post on the iPhoto forum - that's where all of the iPhoto experts hang out.
Good luck,
Clinton

I have a mac and have downloaded adobe several times and it still won't let me open online documents. when i try it says i need to agree to the user agreement and try again

I have a mac and have downloaded adobe several times and it still won't let me open any online documents. when i try to open the document it says I need to agree to the end user agreement

yes and when I push the icon to download and go through all 3 steps it says this version is already downloaded. so i close the browser and try to download the document again and it says the same error

TS3212 I'm trying to update my version of itunes. I get a message that MSVCR80.DLL IS MISSING AND I NEED TO REINSTALL. wHEN I REINSTALL I GET A MESSAGE THAT APPLE MOBILE DEVICE FAILED TO START AND IT WON'T LET ME OPEN ITUNES. WHAT DO I DO?

i'M TRYING TO UPDATE MY VERSION OF ITUNES. i GET A MESSAGE THAT MSVCR80.DLL IS MISSING AND THAT I NEED TO REINSTALL. wHEN I DO THAT, I GET A MESAGE THAT APPLE MOBILE DEVICE FAILED TO START AND IT WON'T LET ME OPEN ITUNES. WHAT DO I DO?

Check out the user tip below.
https://discussions.apple.com/docs/DOC-6562

Developer: How can I let people open files with my program?

Hello Everyone,
I just finished my program for the Mac, and decided to make it an application.
I used Platypus to make my program into an application. Unfortunately when I try to open a file with my program (control + click on file + open with -> other), my application is grayed out and I can't select it. I see it there along with the other applications but I can't select it like I can Mail or TextEdit.
I read somewhere I had to use XCode to let people open files with my program but I have never used XCode and I have no idea how to do that. Any help would be appreciated.
Thanks,
Nick

You've posted in the wrong forum. This is the OS X Leopard Installation and Setup forum. You need to post your problem in the Developers forum. Also, since Platypus is not an Apple product, you should visit it's developers forum for assistance. The Apple Discussions is intended to assist users with problems and questions about Apple products only.
To use XCode Tools you need to install it from the Optional Installs folder on your OS X Installer Disc One. It comes with documentation. More assistance can be found at developer.apple.com.

Word won't let me open files

Similar Messages

Maybe you are looking for