Words cut off at bottom of page

I have a nicely formated document and on some pages the words get cut off at the bottom when the linespacing pushes them right to the bottom margin. The footer is fine just below it. How can I fix that?

Yes there are facing pages, each is 8.5x5" and there are about 45 pages to the document. I switched to non-facing pages and that didn't fix the problem. It only happens on pages where the line goes right to the bottom edge. It's almost as though the setting that would push that line to the next page is slightly off. I tried other fonts and the same thing happens. It shows up in the exported .pdf file and also when I print it so it's not a display issue.
I hate to say it, but I think it's a bug. I'm surprised it hasn't happened to anyone else. Since it only happens on 3 or 4 pages out of the 45, I'll do a hack. Once everything else is totally layed out, I'll slightly adjust the line spacing somewhere on each of the problem pages so that the line pulls up above the cut off.
Thank you so much for your help fruhulda. If you do replicate it somehow, I'd be curious to find out what the problem was.

Similar Messages

Why are prints from Preview cut off at bottom of page

When I print a PDF from Preview the print has about 3/4" cut off the bottom of a portrait document or from the right of a landscape document.. When I print the same document from Acrobat Reader, it prints correctly. I use Page Setup before printing. The scaling in the other direction seems correct which makes the cut-off a mystery.
I prefer Preview for PDFs as it is much faster than Acrobat Reader. The cut-off prints have caused me grief when I have not detected them. What is going on here?

I have the same problem and can confirm it also happens in Leopard. There was traffic on a similar Leopard issue printing landscape to Windows shared printers that was fixed in 10.5.2, but it doesn't seemed to be solved for my situation (printing to CUPS shared printer). Note that it seems to be a bug in the way Preview creates a PDF for printing, since Adobe Reader works fine, and "lpr <filename>" from the command line will also work.
If you have any more info since you posted, I would be interested.

How do I get the page to shift up by as little as 1/8" so it does not cut off the bottom coding of

How do I get the page to shift up by as little as 1/8" so it does not cut off the bottom coding of official documents? There is usually plenty of white space at the top. Center command does not seem to help.

You cannot change pdf files in Reader. You can set it to print with a shrink to fit option.

When I try to print out something on my macbook pro,it cuts off the bottom, but if printed from a pc I get the whole article

when I try to print out something on my macbook pro, it cuts off the bottom, if printed from PC the whole article is printed

marionfromclermont wrote:
I have HP Photosmart 55510 series. In the print dialogue box it shows where the bottom of the 1st page is cut off and the top of the second.
Yes, but the part cut off the bottom of the first page should appear at the top of the second. No content should be lost, just split between pages.
Safari makes little or no attempt to keep a line of print or a picture from splitting across pages, seemingly just imaging the web page as one large image and printing so many inches or millimeters of the image per page.

HP Designjet T520 Printing A3 cuts off at bottom

HP Designjet T520 Printing A3 cuts off at bottom When we plot something with AutoCad, and then print Portrait, it all prints fine except the bottom edge is slightly cut off. The paper we are using is A3, and the printer and Autocad settings is A3. Any ideas? WINDOWS 7 - NO ERROR MESSAGES

This very same issue is affecting me with T520.This happens with vertical A4 and A3, and till now I've not yet found a solution. To be sure to be within printer margins I've set the drawing actual margins on all the four sides to be 1.8 cm from paper sheets borders.But as alway I get the bottom border cut, while the upper border seems shifted downward and it's placed at 3,0 cm from the upper border of the paper. BUTif I set the page to be ORIZONTAL in the application, choose the orizontal page format etc the printout is perfectly aligned. To me this seems a weird issue.Experienced this issue using Archicad 16, Illustrator and Indisign. On OSX, from Snow Leopard to Mavericks. These are my printer details:Nome prodotto HP Designjet T520 24inNumero modello prodotto CQ890A Versione firmware AXP2CN1437AR

Browser fill image cuts off at bottom when published from Muse to BC...?

The site previews fine in the browser but when I publish it to BC it cuts off the bottom of the image and just shows the browser fill color (which is dark grey). I'm pretty sure this is a BC issue because everything looks fine in Muse. I have done all I can think of to fix this but havn't figured anything out. Here is some information if it helps. Weird thing is only the img. I used for the header is listed in the css, the img. for the browser fill is not listed.
http://grasslandoregon01.businesscatalyst.com/index.html
Master Page css:
#u7524
          border-style: none;
          border-color: transparent;
          position: relative;
          background: transparent url("/images/header_swoosh.png") no-repeat center center;
          background-size: cover !important;
#u7524_align_to_page,#u7579
          position: relative;
#u32679
          border-style: none;
          border-color: transparent;
          background-color: transparent;
          color: #FFFFFF;
          position: relative;

Hello,
You probably did not find this article at the right time but there is one KB article explaining how to insert the Edge content into a Muse website.
Basically what you have to do is, after you publish the Edge project, to take the exported folder, or just the files, (but I'm totally into taking taking the whole folder) and upload them to your FTP where the Muse site is published. After that just use the "Object > Insert HTML..." option from Muse and paste the <iframe> code from the KB and customize the path to the folder where the files are located and the width & height for the iframe.
KB can be accessed here: http://www.adobekb.com/inserting_edge_content.html
An example can be found here.
- Edge project uploaded to FTP.
- Content of the project folder.
- HTML code
I hope this will answer your question.
Cheers,
Cristian

IMessages to an iPhone occasionally appears with words cut off from end

When sending texts from iMessages to an iPhone, the text occasionally appears on their iPhone with a couple words cut off from the end. It appears fine in the iMessages display/history.   Here's a few things I've noticed:
- It's repeatable. For example, the following message always causes the issue: "man, why are you here? Two are in testing places". On the iPhone it appears as "man, why are you here? Two are in testing".
- It's a problem with iMessages. If I send the exact same text from the iPhone, it goes through just fine. The message has to originate from MacOS iMessages. (I'm using the latest Mountain Lion and all updates as of 12/21/12)
- The full message is actually being successfully transferred to the phone; it just does not display correctly. There are two pieces of evidence for this. If on the iPhone, the user copies the truncated message and pastes it somewhere else, the full message is pasted! Moreover, on the top level the messages app (where you see the last message from all the recent people you texted with), the full message displays.
- It can happen with both short and longer messages.   Here's another longer message I noticed got cut off: "That's funny that you though I was joking when I said I was debugging. Why is that so weird?"
- It has something to do with the length of the message or how it is being wrapped. I can create modifications of those texts with the same length, and they will cut off. (That said, some modifications will not cause the problem, so it's more than just length. Maybe it has something to do with how it wraps the words?) Usually adding a few words to the message will allow it to go through.
- It always cuts off at a space. In other words, it will not truncate something in the middle of a word.
- I have only seen it cut off one or two words before.
Apple really needs to make this a high priority fix. Unreliable messaging of this sort is a deal-breaker for iMessages, IMO. My guess is that they haven't had more reports for this because people simply don't notice unless the last word or two totally ruins the meaning of a text and the other person points it out.
Can people try to recreate this on their machines? If so, please do so and file a bug report (http://www.apple.com/feedback/macosx.html). All you have to do is get on your iMessage app and text one of those two messages to your phone. If it appears truncated on your phone, you've confirmed it. You're welcome to use any of my post in any bug report.

Hi,
some entries had ¬†¬† (tabs probably)
I had seen these in Quicklook at the point where the Message appeared to show double spaces after a Full Stop or Question Mark.
You are right that it have not dawned on me that I had not seen them between words.
It was TextEdit as well (Not sure why I said QuickLook)
29723AE1-6D8B-4932-8353-875164302786man, why are you here?¬†¬†Two are in testing placesn streamtypedÅË Ñ @ÑÑÑ NSMutableAttributedStringÑÑ NSAttributedStringÑÑ NSObjectÖíÑÑÑ NSMutableString ÑÑ NSString ïÑ +3man, why are you here?¬†¬†Two are in testing placesÜÑ iI 1íÑÑÑ
Part of this means the iMessages sent out.
The "repeat" is the sync back from the the ID the iPhone is using.
I am presuming the leading numbers are the iMessage identifier that iMessages uses to tell whether it has been Synced
Messages on the Mac is trying to enclose this in Coloured Balloon (or other style) and lists a Font and it's colour
NSDictionaryïÑ i íÑòò __kIMBoldAttributeNameÜíÑÑÑ NSNumberÑÑ NSValueïÑ *ÑÑ cü ÜíÑòò __kIMFontSizeAttributeNameÜíÑùûÑÑ q† ÜíÑòò __kIMFontFamilyAttributeNameÜíÑòò Arial BlackÜíÑòò&__kIMBaseWritingDirectionAttributeNameÜíÑùû
The sync from the iOS device lists
¢†ˇÜíÑòò(__kIMMessageForegroundColorAttributeNameÜíÑòò #000000ÜíÑòò(__kIMMessageBackgroundColorAttributeNameÜíÑòò #2ba92dÜíÑòò __kIMMessagePartAttributeNameÜíÑùû¢†ÜÜÜ
( A less complicated "Balloon")
It is unlikely to be the Tab key as this changes Fields in Messages (From Text Entry spot, to Search spot, to the "To" spot.)
8:43 PM      Tuesday; December 25, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

IMovie cuts off the bottom 10% of my video image once it is moved to the editing area. I need the whole image. How can I solve this?

iMovie cuts off the bottom 10% of my video image once it is moved to the editing area. I need the whole image. How can I solve this?

I have solved the problem by changing the Project Aspect to 4:3 rather than wide screen.

HP Envy 4500 cuts off right side of page

When I print a Word 2010 document, the right side of the page is cut off.

Hello Yonniehere,
Welcome to the HP Forums.
I see that you are having an issue with the printer cutting off the right side of the page.
Does this only happen when printing in Word or does it happen with other programs?
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Cfreport cutting off lines on multiple pages created with report builder

I have a report built with report builder and it appears that if you set the body to "stretch with overflow" that cfreport will "cut off" a line or two every time it paginates see attached for a simplified version of the report, I have removed all but the body on this (actual report has a watermark, report header, page header and page footer ...the problem is pretty apparnt with this scaled down version as you can see it's missing text from one page to the next ..any ideas/suggestions/known bug?? You can see a sample of the issue here: http://www.arroyoc.com/onlybody.pdf

Hi Helen,
As per my understanding, I think this issue is caused by width size is not appropriate in the report. To narrow down this issue, please make sure that Body Width + Left margin + Right margin <= (Page width).
If the tablix is a matrix, because of the column group can expand to multiple columns, we should according to the following rule:
Body Width + Extra expanded column width + Left margin + Right margin <= (Page width).
Besides, please make sure there are no extra page breaks before each “R”. To check whether the issue is caused by the letter “R”, we can try to use another field to replace the Company Name field.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Vertical Pictures Cut Off in Photo Album Page

On my photo albums page, the picture I want to use as the first picture is a vertical picture. But on the albums page, the albums are all horizontal. So when someone goes to look at my albums page, they just see these cut-off pictures with heads missing. Is there a way to change the orientation of the albums so they are vertical? Or is there a way to edit the first picture so that you can move the picture down so at least the head is showing in the horizontal view?

Hi Kara,
the only solution I can find is to drop a vertical photo into the MyAlbums page and cover the album with it (thus hiding the other head-less photo) linking that photo to the photopage.
However this will cause the effects moving the pointer over the album cover (skim, dissolve, ...) to disappear.
As far as I know albums can't be rotated and vertical photos are cut off and you can't tell iWeb not to cut them off...
Regards,
Cédric

Why do burned in subtitles cut off on bottom of screen?

I'm watching a Foreign film through NetFlix. The subtitles are burned into the film already and are part of the film. An example is Tous Les Matins du Monde. These burned in subtitles are being cut off on the bottom of the screen. I've tried all the available aspect ratios on my TV and there do not appear to be any setting on the Apple TV Ver.2 to adjust the aspect. I've tried the Apple TV on two other flat screens all of different makes and the same problem exists - burned in subtitles cut off.
Does anyone have any ideas on how to resolve this?
Thanks in advance.

Same problem here. Watching mostly foreign or older films. Displayed with a black frame around the content, and everything appears squished. Top frame is cropped.
Any help would be appreciated.

Mozilla cutting off the bottom of my FormsCentral Form

All the content on my site is in <section>tags and everything fits beatifully except this form (meaning there is no height set in the css for the sections) and only on firefox. Has anyone else run into this? It is cutting off the submit button which makes the form useless in firefox.

Did you use FormsCentral's Embed feature to embed your form in your site's HTML page? To ensure the form is correctly embedded in your web page, you'll need to let the FormsCentral generate the embed code for you. To do that, please go to the Distribute tab, and click the Embed button in the Web Form section. A pop-up dialog will be shown to let you pick the embed form options. Once you have the options you want, click Copy, which copies the embed code into your computer's clipboard. Then you can paste the code into your own web page.
This document (http://forums.adobe.com/docs/DOC-1991) explains some common problems we have ever seen in our custimer support cases for embedding FormsCentral Forms. Please take a look. I hope it'll help you a bit.

Top of words cut off in MSword docs.

In word docs, the top of the words are cut off. This does not happen in Quickbooks invoices. I have cleaned & aligned cartridges, cleaned paper tray. Any suggestions

Hi Jazpt
Welcome to the HP Forums!
I see that the top of words are cut off when printing from MS Word. I am happy to help you with this printing issue!
For further assistance, I will need to know:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, Ethernet, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Why does ipad cut off left side of page?

What do you do to see left side of page which is cut off?

If you have Zoom enabled, that could cut off the left side of the screen, but everything would appear very large on the screen as well.
Settings>General>Accessibility>Zoom>On. You want to turn it off. Double tap three fingers and drag to change Zoom. You can see the instructions below.
If that's not the problem - try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Words cut off at bottom of page

Similar Messages

Maybe you are looking for