Worflow 20000077 Release Purchase Requisition will not start.

I have the configuration completed on the release codes and when I create a purchase requisition it is blocked but I can't get the system to release the workflow. Does anyone have detailed directions on how to get this done? Thanks!
Chris Lintner
Aflac

I watched the online tutorial on SDN and it answered ALL of my questions! Go SAP!

Similar Messages

TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.

You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line

Mac OS 10.5 / I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!! I do have the OS dvd that i purchased years ago... But my computer will not start from it on its own. My

Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guys

Okay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;)

An update of iMovie failed with the message "an error has occurred." That message remains posted by iMovie on the Mac App Purchases page. iMovie is now unavailable. It will not start, update, or reinstall from purchases page. How reinitialize app?

An update of iMovie failed with the message "an error has occurred." That message remains posted by iMovie on the Mac App Purchases page. iMovie is now unavailable. It will not start, update, or reinstall from purchases page. How do I reinitialize the app?

Thank you again. Here's the console messages from trying to open iMovie and then opening the App Store. Clicking on the iMovie icon in App Store purchases and clicking on check for unfinished downloads:
8/28/14 4:56:26.743 PM Dock[214]: LSOpenFromURLSpec(file:///Applications/iMovie.app/) failed with -10699
8/28/14 4:56:47.878 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:56:47.879 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:57:50.201 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:57:50.201 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:35.745 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:35.745 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:35.824 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:35.824 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:35.847 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:35.847 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:36.276 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:36.276 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:39.448 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:39.448 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:39.449 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:39.449 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:55.996 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:55.996 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.021 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.022 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.051 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.052 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.342 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.342 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.411 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.411 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.425 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.425 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.508 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.508 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.518 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.519 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.696 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.696 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.808 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.808 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.826 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.827 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.838 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.839 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.843 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.843 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.857 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.857 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.893 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.894 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.907 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.907 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.923 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.924 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:56.969 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:56.970 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.039 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.039 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.045 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.045 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.145 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.145 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.231 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.231 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.249 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.249 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.293 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.293 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.350 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.350 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.352 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.353 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.400 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.400 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:57.402 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:57.402 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:59.814 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:59.814 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:58:59.932 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:58:59.932 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:00.697 PM acwebsecagent[127]: Connection : Failed to connect to 167.8.226.9:80. Code : 60
8/28/14 4:59:00.698 PM acwebsecagent[127]: Connection : Caught exception. Code : 60
8/28/14 4:59:00.698 PM acwebsecagent[127]: Connection : Failed to connect externally. Code : 60
8/28/14 4:59:01.352 PM acwebsecagent[127]: Connection : Failed to connect to 167.8.226.9:80. Code : 60
8/28/14 4:59:01.352 PM acwebsecagent[127]: Connection : Caught exception. Code : 60
8/28/14 4:59:01.352 PM acwebsecagent[127]: Connection : Failed to connect externally. Code : 60
8/28/14 4:59:01.402 PM acwebsecagent[127]: Connection : Failed to connect to 167.8.226.9:80. Code : 60
8/28/14 4:59:01.402 PM acwebsecagent[127]: Connection : Caught exception. Code : 60
8/28/14 4:59:01.402 PM acwebsecagent[127]: Connection : Failed to connect externally. Code : 60
8/28/14 4:59:26.564 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.565 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:26.660 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.660 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:26.840 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.840 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:26.864 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.864 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:26.984 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:26.984 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.069 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.069 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.079 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.079 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.083 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.084 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.385 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.385 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.389 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.390 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.391 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.391 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.411 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.411 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.435 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.436 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.443 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.443 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:27.479 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
8/28/14 4:59:27.479 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
8/28/14 4:59:31.036 PM acwebsecagent[127]: License : One or more of the License/Public Key can't be NULL
8/28/14 4:59:31.036 PM acwebsecagent[127]: SSLExt : Failed to get ScanSafe headers
8/28/14 4:59:31.036 PM acwebsecagent[127]: DownloadUpdatedConfig : Failed to download updated config. Host hostedconfig.scansafe.net. Code 0x80004005

I just upgraded to relaese to release 11. My PC runs Windows 7. itunes will not start. I have run Norton to fix the registry errors and have rerated my PC twice. No luck. Can anyone provided a suggested solution?

I just upgraded to relaese to release 11. My PC runs Windows 7. itunes will not start. I have run Norton to fix the registry errors and have rerated my PC twice. No luck. Can anyone provided a suggested solution?

This solved everything, after uninstalling IObit Advanced SystemCare iTunes would open with Bonjour enabled however iTunes wouldn't pick up the iPhone device. I did some more digging and a few of their other applications had been installed including Game Booster. Uninstalling that put everything back to normal.
I have been given a new device by Apple who were really helpful and the guys have neever seen the docking connector disabling before. Coinsidence?
Anyway in case this helps other people these were the symptoms (might help with searches):
- Windows 7 Ultimate 64bit
- iTunes 10 wouldn't open originally, just egg timer then nothing yet processes all started
- Docking connector died on the device, wouldn't even trigger a standard USB connection or light up the device
- Uninstalling iTunes etc didn't change anything
- Disabling Bonjour worked but iTunes extremely unstable, seems frozen when syncing and the sync itself, especially with app transfer, was extremely slow and the other buttons were unresponsive after clicking for two minutes before screen would change
Have sent feedback to IObit about this to see if there isn't something that can be done.
Fantastic assistance and an incredible spot from b noir. If you come to the UK you need to drop me an email as I owe you a night out on the town!
-

Purchase order referencing released purchase requisition change

Hello everybody
When we create a purchase order making reference to a released purchase requisition, I can still make changes on the item such as changes on the quantity, value, etc.
We would like to know how to restrict changes of purchase orders when they reference purchase requisitions already released.
Thank you in advance and regards,
Alejandra Álamo B.

Hi,
For meeting this requirement, you will have to create a new document type (If the same requirement exists for all the Purchase Orders, do not create additional document types).
Next create a new Field selection where the fields that are copied from PR are made non editable (display). Assign this field selection to the new document type.
Normally, PO fields are editable because the quantity and values may change based on the negotiation with vendor, or to club requirements.
Hope this helps
Priyadarshi

HP TouchSmart application will not start

We purchased an HP IQ 526 TouchSmart desktop with Windows Vista Home Premium 64-bit machine approximately two months ago. We use Clearwire to connect to the internet. About a month ago the HP TouchSmart applilcation stopped working. It will not start. Every time we try to start it we get the following error message:
HP TouchSmart Calendar has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Sometimes it says it's the HP TouchSmart Notes has stopped working or one of the other TouchSmart applications. I went to hp.com and updated all of the software for the TouchSmart application and Windows Vista. And I reguarly use Windows Update to ensure my OS is current with Microsoft security updates. I also updated the firmware. After these actions and rebooting many times the application would still not start. At this point I contacted HP customer support. We uninstalled HP TouchSmart, then reinstalled. This didn't work. I continue to see information events in the Windows Application Log almost every minute regarding HPTouchSmartCalendarNotes. They are typically the following messages over and over:
Reminder clock elapsed event is successfully fired.
CheckReminder() is executed successfully.
ShowReminder() is executed successfully.
After Fetching the XML nodes, checking for each node is done successfully in ShowReminder()
Events in Events.xml Before Showing Reminder<DataRoot></DataRoot>
I still have a case open with HP support and they said uinstalling the OS and reinstalling is likely the next step but I have to believe someone else has run into this issue or HP has a QFE for this issue. I really do not want to uninstall the OS and reinstall it. This has become very frustrating as the HP TouchSmart application is the primary reason we purchased the computer so my wife can manage our photos and music collection via the touch screen.
If anyone has seen this before or has a solution I would love to hear about it. We are considering taking the computer back if we can not resolve this issue.
On a related note and this might be a separate issue I continuously get HPTCS stopped working messages. I've searched the internet for what HPTCS.exe is and what is does but there is little to no information available.
Please let me know or if there is additional information I could provide that would be useful for troubleshooting.
Cheers,
G

Our machine was sent back to HP and they reformatted our hard drive and sent it back. Wow. Fantastic service. NOT!!!! I could have done that. Without debugging their own software to figure out why this was happening they reformatted the hard drive. I can only expect this problem will happen again since there must be a software update, etc... that is causing this behavior. I honestly do not know how to voice my disgust in their customer service. I have been a long time fan of HP and we basically only buy HP at work but this was the poorest display of customer service I have ever encountered. If your TouchSmart application stops working and the TouchSmart software updates do not resolve the problem you might as well pretend like you bought a normal computer without touch capabilities. Like buying an iPhone without it behaving like an iPhone.

Oracle 10G Non-Network install - OEM will not start when on the LAN.

Greetings,
Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
===========================================================
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered for the loopback adapter.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
==========================================================
In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.110.250 IBM-6AB1330E158
==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
IP_address hostname.domainname
- not -
IP_address hostname.domainname hostname
Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
Thanks in Advance for any help,
ADG13

I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
fwiw,
ADG13
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : IBM-6AB1330E158
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ibm.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.110.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-11-25-13-96-AF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 65.24.7.3
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
Ethernet adapter AGN Virtual Network Adapter:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . : AGN Virtual Network Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-01
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 9.49.217.159
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 9.49.217.159
DNS Servers . . . . . . . . . . . : 9.0.2.1
9.0.3.1
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

ITunes 10.6.3 for Windows (64 bit) will not start

When I upgraded to this version of itunes, the computer states that it installed correctly, but the itunes will not start. The following is the error report message:
Problem signature:
Problem Event Name:        BEX
Application Name:        iTunes.exe
Application Version:        10.6.3.25
Application Timestamp:        4fd16377
Fault Module Name:        QuickTime.qts_unloaded
Fault Module Version:        0.0.0.0
Fault Module Timestamp:        4ea5d609
Exception Offset:        68121040
Exception Code:        c0000005
Exception Data:        00000008
OS Version:        6.1.7601.2.1.0.256.48
Locale ID:        1033
Additional Information 1:        0a9e
Additional Information 2:        0a9e372d3b4ad19135b953a78882e789
Additional Information 3:        0a9e
Additional Information 4:        0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Any help is appreciated,
Rick

I've also got a similar problem. I upgraded yesterday & today I find (mainly with previously purchased tracks) that iTunes only playes about 51sec of a track. The whole track plays when using "Quicktime" but this doesn't help me when I'm trying to put together a playlist.
Can anyone out the help?

Mac crash; recovery will not start

Yesterday my Mac suddenly crashed into a screen with blue (and white) lines. It wouldn't respond to anything, so I powered it down and tried to boot again. However, it will not boot. It will show the Apple logo, request my password and after a while (with the Apple logo and the spinning wheel) it just shows a blank screen (grey), while the CPU fans are spinning like crazy.Sometimes will it not even get this far and stop doing anything before requesting the password. The guest mode has the same problem.
I basically tried everything to fix it; the recovery option will also show the blank grey screen but nothing else (even after 30 minutes); the internet recovery downloads fine and then pulls the same stunt, so even the recovery will not work. I've tried save mode, which cannot start up (Filevault is activated) and seems to end mid-way through. Sometimes the safe mode crashes immediately after the boot starts with a kernel panic (/sbin/launchd failed, errno 2); after resetting the NVRAM it won't panic.
I've checked the hardware (T startup option, full check), which al seems to be OK. SMART status from the harddrive looks OK (checked with DiskWarrior). Starting in single user mode sometimes gets me through the password request screen and allows me to check the hard drive (fsck -fy). This seems to change permissions, however, after a reboot or exit command, the problem persists and starting up in single user mode and performing the fsck -fy command again seems to fix some issues. When I enter the exit command in safe mode, it'll start up fine, but when the graphic user interface starts, it'll give me the grey screen again (so a blank screen, while the CPU fans are at full power).
Does anyone have any idea what I can do to fix this? Since even the recovery will not start (and neither will the internet recovery), I've got no clue what to do to fix this issue...

Your comment about the "blue and white lines" has me wondering. You say you have a fairly recent MacBook Pro, correct? If that is the case, you probably have a model which has both discrete and integrated GPUs. It is possible that your discrete GPU has failed, and whenever the OS is trying to switch to it is when your system just "hangs" (because the GPU has failed). It all works properly as long as it is on the integrated GPU, but when something causes it to switch it hits the bad GPU and locks.
I would suggest that you make an appointment at your nearest Apple Store to have the specialists at the Genius Bar take a look at it for you. If you are still under the 1 year warranty (or extended Apple Care if you purchased it) then any needed hardware repairs would be free, unless it is due to accidental damage such as a spill in the keyboard, etc.
If you don't have access to an Authorized Apple Service Center, and you do have access to another Mac, you could try making an external boot drive on the other Mac, then install the app "gfxCardStatus" on that MacOS instance (when booted from the external drive). While still booted from the external drive, use the gfxCardStatus app to force the Mac to only use the integrated GPU then shutdown and boot your "dead" Mac from that drive. If it boots and runs, now, try to change the external drive to force to use only the discrete GPU then see how your system boots. If your system, will fully boot using one or the other, then it seems that your problem is probably related to one of your GPUs. It could be a hardware failure, or it could be a corrupted driver. If your system won't boot from either GPU, then my guess about it being a GPU issue is probably wrong.

3.6.16 will not start, it will not uninstall and 4.0 will not install, how do I fix this?

I tried to revert to 3.6.16 after uninstalling 4.0 (because it deactivated too many of my add-ons). Now Firefox will not start at all. I followed the instructions that applied to me in "Firefox will not start" but it had no effect. I tried system restore but that also did not fix it. I'm having to use IE8. I do not have any Norton products. Please help.

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Firefox will not start after an update.

I have to manually uninstall Firefox and manually install the update every time.
I asked a similar question before. The response was to start in safe mode. BUT the program will not start. It acts as if there is a software switch set to "don't run this program under any circumstance." The switch is either in the registry or among the program files, because these both get cleared on a manual uninstall. The update procedure is not clearing the registry or the program files.
Does the update process uninstall the previous version and then install the update version?
Part 2 --
I often cannot find the update manually on the Firefox site.
I am on the Beta release channel. The current release is 33.0 beta 4. However, the most recent on the site is beta 3. Where is 33.0 beta 4?
OS is Windows XP latest release.

Thanks kenton. But now pop-up says beta 5.
The ''real issue'' is what is going on. On one machine the update process works, but on my other machine it does not.
The machines are identical IBM T60s with Windows XP.
This is a real mystery, as well as being annoying.
A clue or suggestion any one?

How do I transfer my playlists to a new pc if iTunes will not start on my old pc ?

How do I transfer my playlists to a new pc if iTunes will not start on my old pc ?

Hello bdem01,
Congratulations on your new computer! The article below outlines several methods to transfer your music from your previous computer to your new computer.
I recommend following the steps to transfer your iTunes Library using an external drive. This will transfer your playlists without requiring the iTunes application to open. :
The following table compares the methods to move music from your old computer to your new computer.
Method
Considerations
Home Sharing
The easiest option, as long as your new computer is already connected to the Internet.
External drive
Requires additional hardware but backs up your iTunes library.
Transferring purchases
Fastest, but only moves the content you purchased from the iTunes Store. Also requires an iPhone, iPad, or iPod with the content on it.
Windows Migration Assistant
Works best for migrating from an old PC to a new Mac, and transfers more than iTunes.
You can find the steps for each of these methods in the article:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Thank you for using Apple Support Communities.
Best,
Sheila M.

Number of PO with Purchase requisition number not null

Hi Experts,
I need to number of PO with Purchase requisition number not null in ECC
T-CODE nse16n and table name =EKPO
But when I make EKPO-BANFN not equal NULL it doesnt work ? how can do that ?
I custom my data source 2LIS_02_SCL with EKET.BANFN I want to check my DS with ECC data .
Thanks and best regards
Ilyaebi

IF you need to check the number of PO's with Purchase requisition number not null then simply open the table EKPO in SE12, click on Contents and against the field BANFN right click on the empty box where you enter values and click on Options. From the pop up window selecte Not Equal to and check the Number of Entries in the table. You will get the desired result even though the volume of data might be large.
Regards,
Arminder

Torch 9860 Will not start

My 9860 will not start . The phone will try to start up but gets 3/4 across the screen then stops and tries to start again . Any help would be good . Thanks

Hi and Welcome to the Community!
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
Otherwise, you may be in a bad situation indeed, with the only remedies being quite drastic:
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
Hopefully you already have a good backup of your BB, as these measures typically do not allow for any to now be taken.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Worflow 20000077 Release Purchase Requisition will not start.

Similar Messages

Maybe you are looking for