Worflow : Method with in the task is not working.
Hello,
i am saving a parked document and change event is triggereing ( i saw this in SWEL).
i have a created a single step task that contains the trigering event (Change for parked document) and custom method which contains the code to update a z table.
i see in swel event is fired and also the task is fired with that.
but the table is not getting updated.
i tested the object and debuggd it manually through swo2. the program is working fine when executed through swo2. but doesnot work when executed through an event via transaction.
please let me know if there is any additional setting for this to work.
Thanks.
I went in to worflow log and found that,
1. Status : Ready.
2. After pressing details button i get details for step table below.
3. In this table there are two entries : a)Work item Created after event. b)Dailog work item created.
can somebbody please explain me why the method is not executed (or is it executed).
thanks
Similar Messages
-
Hi all,
WIFI of Macbook Air works when the notebook started with OS X.
But when I restart the Macbook Air with Win8, the Wifi does not work.
The Macbook Air was bought last month. It is new model. The wifi may be a/c.
Thanks,hey zyzzyxx, you're not the only one with this issue. it happens to me too. as soon as i unplug my cintiq via thunderbolt display my connection shoots straight back to having 20mbps down. i checked it using a speedtest.
ever find a fix for it? -
Scenario:
We use one of the following Group Policy Preferences Scheduled Tasks item to deploy a task to clients:
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
(Note that on some platforms, "At least Windows 7" is replaced with "Windows Vista and later.")
After designating a user account to run the task, we select “Run whether user is logged on or not” option, and “The Do not store password…”
check box is automatically grayed out (See Figure 1).
Figure 1
After finishing configuring the task item, on a client, we run command
gpupdate/force to forcefully update group policy. However, on the client, when we check if the task is listed in Task Scheduler snap-in, the task is not displayed, and when we run
gpresult/h report.html to collect group policy result for troubleshooting, we see an error as similar as shown in the following figure (Figure 2).
Figure 2
Cause:
To make the scheduled task run whether the user is logged on or not, we need to store the password of the designated user account. However, for the content of the scheduled
task item is stored in Sysvol where it’s not safe to store passwords, this function has been deprecated.
Workaround:
We can run the task with system account
NT Authority\System, or we can use specific user accounts to run the task when the given user is logged on. (See Figure 3)
Figure 3
Reference:
MS14-025: Vulnerability in Group Policy Preferences could allow elevation of privilege: May 13, 2014
http://support.microsoft.com/kb/2962486
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Hello Everyone,
Succeeded !!!!!!!
Even i was struggling with this same Problem to execute a batch via Window scheduler and set the setting to "Run whether the user is logged in or not".
I tried many time but the batch runs with " Run
whether user is logged on" and not with "Run
whether user is logged on or not".
what i discovered is that there was one mapped drive
path in my batch file which was not the complete path like y:/AR.qvw actually what i did i changed that map path to the complete path like \\servnamename\d$\AR.qvw and the batch executed successfully with the setting "Run
whether user is logged on or not"
The
conclusion is that check the dependency of the script on external resources because when you check this option "Run
whether user is logged on or not" It actually conflicts. This my discovery.
If
you have any question write me on [email protected]
Thanks
& Regards,
Arun -
I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
Ned, thanks for responding. Internet access is not the problem, I will have a tower computer connected to Comcast.
Isolating the laptop from the internet is the issue.
From: Ned Murphy <[email protected]>
To: Mordecai benHerschel <[email protected]>
Sent: Wednesday, March 18, 2015 7:27 PM
Subject: I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussionSince it is a portable machine, couldn't you go somewhere that has wifi available and use that as a temporary internet connection? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7314414#7314414 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7314414#7314414 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP
I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default. -
Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ -
I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
Help, my 4s calender syncs with gmail. the ical does not show any appointments anymore.
It use to. How can I get my appointments to show up on my phone?
They show up in gmail, but not on the phone.Is there a fix for so the I phone shows the dates I make on the I phone?
The iphone should show dates when I make them, on the iphone, but it is not showing any appointments made with the iphone on the iphone.
The gmail has the dates, but the I phone does not have it.
I used to be able to see them both, it has been just a week or two. Do I need to relink the calenders?
It is the iphone that does not show the dates, gmail shows them.
How -
I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.
The plugin shows on the list as enabled and functioning, yet the tool does not show on the toolbar. It would appear that I need to restore the previous version of Firefox and wait until a newer release of the plugin is available before upgrading the browser.I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!" -
Syncronizing my 3gs with itunes the sync does not finish because itunes always crash and stuck and i can not sync my device, i dont no whats wrong because the itunes even can not acess itunes store, still loading waiting for itunes store and nothing.I tryed reinstall itunes but just waste of time.
My itunes is update, iphone 3gs 4.3.4, system is windows vista home premium.
Please help me.I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
You asked what I meant about saving the installer on your PC.
When you go to the iTunes download page:
http://www.apple.com/itunes/download/
And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts. -
I recently purchased refurbished Apple TV to save few bucks, but I spend more than what I saved on refurbished one. I would suggest every one not to buy any refurbished product from Apple online store. The remote which come along with the unit is not working at all. I changed couple of batteries as I thought initially that the batteries may not be working but no success at all. I saved $14 on refurbished unit, but in total I have spend $10 to fix the issue but still it hasn't been fixed yet. I have taken an appointment for yesterday at Toronto Eaton center Apple store and again it will cost me atleast $25 again ($15 for parking and $10 for gas as I have to drive from Hamilton).
Does any one else have the same issue like this?Amol Soni wrote:
As I said, I tried everything what the manual says, but hard luck. I have taken an appointment for today, lets see what happens.
Also there is no activity on unit when I use the remote. The unit is stuck on the first page itself where we have to choose the language. The unit seems to be fine to me but the real problem is remote does'nt have activity. The IR is not responding while pressing any of the button.
Good luck with your appointment.
Not much consolation but even new products can have issues and might need a trip to a store to return/replace.
The reason i asked about the LED on the AppleTV is that occasionally it thinks it's paired with a specific remote and ignores others - the unpair keypress I described is quick and free.
AC -
Hi, I am using a Mac computer that my husband set up. I have worked on it recently with no problems. Today, I am having problems with the bluetooth keyboard not working properly. The numbers 1 through 9 do not work. I have gone through troubleshooting wireless mouse and keyboard issues and everything looks good. Except, when I check the keys on the keyboard viewer, these keys still do not work. The webpage guides me through and at this point I do not know what to do next, because the keyboard is still not working properly. I sure hope there are some experienced people in the community to help me. What should I do?
Hi:
I wish my suggestion had gotten you further.
I do suggest you try to connect the keyboard again. The request for a number is a step in it trying to pair. If it gets by the number, it sometimes takes a little while to get connected. If you are unable to get it connected and want a new one, I have been using Apple Bluetooth keyboards for years - and I like them. The one I have (the newest model) only uses two batteries and is very thin.
Speaking of batteries, if you are not already doing so, you might consider rechargeables. I have a drawer full of them and use a 15 minute charger. I go tired of buying batteries and rechargeables are environmentally friendly to boot. At the moment, I use 2450 mAh Energizers and a 15 minute Energizer charger (all purchased new on eBay at a very reasonable price).
I am far from an iPad "expert," although I have one. If my suggestion below does not help, post your question in a separate thread in the iPad forum.
I had a terrible time syncing my iCal on my Mac with my iPad iCal (confusing - hopefully it makes sense). I quit using iCloud as that added to the confusion. There is a facility to one-time sync items. When you connect your computer to your iPad, iTunes opens. The system begins a process (automatic backup and so on). After it finishes, you can click on "info." At the bottom of the screen, there is an advanced section. You can select any of the items and then force it to sync. The iCal information from your computer would be deposited on the iPad.
After all that, I do not use a Google calendar so the information may be worthless to you.
If you want to reset the iPad to factory settings, you can do that when it is connected to iTunes (one of the options). Me being me, I try never to erase anything.
Barry
Message was edited by: Barry Hemphill -
I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?
The 2nd generation can not be upgraded beyond 4.2.1.
-
I have a licensed copy of Adobe Acrobat X Pro for Windows. I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS? Can anyone assist me with this conversion?
Best,
James.you cannot use your pc license to install on a mac. you would need a separate license (and serial number) for that.
adobe allows platform swaps, but only with the latest (xi) version, Order product | Platform, language swap
your option to use acrobat on a mac are to upgrade to acrobat pro xi and change platforms, use a windows emulator (parallels/boot camp etc) on your mac or swap with a third party. -
Problem in SQL with CURSOR( ) ,Why the CURSOR did not work?
hi All:
I have a problem in SQL with CURSOR.
The data is as the attachments.
Here is the SQL statement as follow:
SELECT A.WADCTO,A.WADOCO,B.IGCOST,CURSOR (SELECT X.IGLITM
FROM F3102 X
WHERE X.IGDOCO=A.WADOCO
AND X.IGCOST IN ('B1','D1','C3')) AS DETAIL
FROM F4801 A INNER JOIN F3102 B ON A.WADOCO=B.IGDOCO AND A.WADCTO=B.IGDCTO AND B.IGCOST>' '
WHERE A.WADOCO='10004'
The statement above returns records as follow:
WADC WADOCO IGCOST DETAIL
WO 10004 A1 CURSOR STATEMENT : 4
CURSOR STATEMENT : 4
IGLITM
1KV90CPG2
1KV90CPG2
1KV90CPG2
But, after I add one statement in the subquery, there is no record returned from CURSOR.
Here is the SQL statement:
SELECT A.WADCTO,A.WADOCO,B.IGCOST,CURSOR (SELECT X.IGLITM
FROM F3102 X
WHERE X.IGDOCO=A.WADOCO
AND X.IGCOST=B.IGCOST
AND X.IGCOST IN ('B1','D1','C3')) AS DETAIL
FROM F4801 A INNER JOIN F3102 B ON A.WADOCO=B.IGDOCO AND A.WADCTO=B.IGDCTO AND B.IGCOST>' '
WHERE A.WADOCO='10004'
The statement above returns records as follow:
WADC WADOCO IGCOST DETAIL
WO 10004 A1 CURSOR STATEMENT : 4
CURSOR STATEMENT : 4
no rows selected
Why the CURSOR did not work?
The database version is Oracle Database 10g Release 10.2.0.4.0 - 64bit Production.
F3102 DATA:
IGDOCO IGDCTO IGLITM IGCOST
10004 WO 1KV90CPG2 A1
10004 WO 1KV90CPG2 B1
10004 WO 1KV90CPG2 C3
10004 WO 1KV90CPG2 D1
F4801 DATA:
WADCTO WADOCO
WO 10004
Edited by: user2319139 on 2010/3/2 上午 1:17
Edited by: user2319139 on 2010/3/2 上午 1:20Why this structure and not a join?
The cursor() function returns a cursor handle that needs to be processed - in other words, the client needs to fetch data from it. The Oracle® Database SQL Reference+ (http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/expressions005.htm#i1035107) describes it as being equivalent to a ref cursor handle.
Thus why are you creating ref cursor handles as a column in a SQL projection - where each row will have a "+nested+" ref cursor handle to process. What problem are you attempting to hack solve this way?
Maybe you are looking for
-
Transportation - Diferenu00E7a em custo de frete.
Tenho um tipo de transporte que faze três paradas, da usina para um deposito(Deposito não emite nota fiscal), desse deposito vai para um segundo deposito(Que também não emite nota fiscal), saindo do segundo deposito o material é direcionado ao porto
-
Have tryed to resten frifox, pc and router. Also turned of firewalls
-
Error: "You are not connected to a company" in deployment site
This error only occours in the deployment site, in development I have no such error. In the deployment site all the software is installed in the same machine. This is a WebService developed internally with VStudio .NET,in c# , and we are using SAP BO
-
Iphone; best practice for better battery life
Okay, I've searched other threads and can't really find anything definitive on all this. I've found my battery life to be disappointing; I can go one and a half days without wi-fi or bluetooth turned on before it turns off. 1) Is it true that when I
-
I created a bar chart with Crystal 9.2 on my laptop. I then copied that rpt file to the company server. The report ran fine using the company's Crystal Xi, except that most of the colors disappeared from my bar chart. Only a couple bars are in color,