Work around for Custom Slide Show

My powerpoint 2010 presentation has several custom slide show to 'repeat' the current slide when clicked. After publishing in Adobe Connect via Presenter, the button with action to show and run the custom slide show did not work. Is there a work around this? I also hid the playbar, I was required to create/add buttons on the presentation to be used as navigation controls. One of the buttons is set up with an action to show and run the custom slide show (which basically repeats the current slide).

Apperently iTunes 11 is not affected (Apple stil makes iTunes11 for the 14 yr old Microsoft XP OS, but not for anything PPCs can run. Go figure)
"Next door" to Steve was metaphoric, he lived in Los Altos, about 15 miles away, but he cast a big shadow!
On 9.2.1/10.4.11 differences, some time in the past someone selected 'save file' and checked the box 'don't ask again' on your computers dialog box. That's why you're not given a choice wih the file downloads. I would think that selection should be able to be reversed.
iTunes 9.2.1/OS10.4.11 puts those downloaded URLs into the Music Libary of iTunes, no matter if it's opened directly, or you click on the file on your desktop. You can create a new playlist, highlight the selection in the Music Libary, and drag it to your new playlist to keep alll the steaming URLs together. NOTE, this only creates an alias, the URL copied by iTunes must remain in the Music Libary. You can then delete the the files on the desktop, if you want. I did multiple stations this way in 9.2.1, they all show in either the new playlist created, or in the Music Libary, and remain after the desktop files are deleted and trash emptied.
You can switch sations by double clicking them. Another note, all the URLs were all from vtune.
I hope this helps.
PS, I forgot how clunky Tiger is compared to Leopard...

Similar Messages

Random order for a slide show?

How do you select a random order for a slide show?

You rang?
I had actually started working on this sometime in the past when this question was asked before. I never got around to finishing it but I cobbled this together this AM:
set newList to {}
tell application "Aperture"
activate
          set imageSel to (the selection)
          if imageSel is {} then
                    error "Select images."
          else
                    repeat until (count of newList) = (count of imageSel)
                              set randomPick to random number from 1 to (count of imageSel)
                              if randomPick is not in newList then set newList's end to randomPick
                    end repeat
                    repeat with i from 1 to count of newList
                              tell item i of imageSel to make new custom tag with properties {name:"Random", value:item i of newList}
                    end repeat
          end if
end tell
Takes a selection and assigns random numbers to each image in the selection,
Creates a custom tag Random and populates it with numbers. If you add the custom field Random to the list view metadata parameters you can sort on it and then switch back to icon view and the images will remain in the random order.
You have to be careful if you change the sort order of course the randomness will be gone and you will need to go back to list view to re-establish it.

Work around for radio tuner service not working

A work around for the lack of radio tuner service that has appearently hit Itunes versions lower than 11.
We all hope that Apple will restore Radio Tuner Service for us legacy products users soon, but I've been thrown under the bus more than once by Apple in the last 25 yrs to put much hope in that (I started with an Apple III w/a Z80 card running C/PM, yeah I'm that old)
Have your iTunes and your favorite browser open.
In your browser go to http://vtuner.com/setupapp/guide/asp/BrowseStations/startpage.asp
This will give you a list of Genre's, etc of streaming internet stations.
When you select a genre you'll get a list of stations that shows station ID, what type of feed codec and data rate.
Select any of the AAC or MP3 feeds.
Select play.
This will send a small download file to your computer containing the selected feeds URL.
Your computer will ask what app to use to open the file, select iTunes.
This will automatically open a file called Internet Songs at the end of Playlists in iTunes (if you don't already have one), and will install the URL there.
All the stations you selected will now be permanently stored in Internet Songs.
Viola, your very own custom personal internet radio playlist!
GT
Dual Core 2Ghz G5, 9.22/10.4.11/10.5.8

Apperently iTunes 11 is not affected (Apple stil makes iTunes11 for the 14 yr old Microsoft XP OS, but not for anything PPCs can run. Go figure)
"Next door" to Steve was metaphoric, he lived in Los Altos, about 15 miles away, but he cast a big shadow!
On 9.2.1/10.4.11 differences, some time in the past someone selected 'save file' and checked the box 'don't ask again' on your computers dialog box. That's why you're not given a choice wih the file downloads. I would think that selection should be able to be reversed.
iTunes 9.2.1/OS10.4.11 puts those downloaded URLs into the Music Libary of iTunes, no matter if it's opened directly, or you click on the file on your desktop. You can create a new playlist, highlight the selection in the Music Libary, and drag it to your new playlist to keep alll the steaming URLs together. NOTE, this only creates an alias, the URL copied by iTunes must remain in the Music Libary. You can then delete the the files on the desktop, if you want. I did multiple stations this way in 9.2.1, they all show in either the new playlist created, or in the Music Libary, and remain after the desktop files are deleted and trash emptied.
You can switch sations by double clicking them. Another note, all the URLs were all from vtune.
I hope this helps.
PS, I forgot how clunky Tiger is compared to Leopard...

Got error message with web based application that it would only work on MS Explorer 6.0 or newer. Any work around for this?

When accessing a web based program I got a message that it could only be accessed using MS Explorer 6.0 or newer. Is there a work around for this?

There is a way to do this.
But it works or not, I have no idea.
Enable "Develop menu".
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click the Develop menu and select "User Agent"
There are choices. Do not forget to make Safari default again afterwards.

In iOS 4, you could make separate photo slide shows with separate songs. In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show. Is there any way to fix this? This is something I

In iOS 4, you could make separate photo slide shows with separate songs.
In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.
Is there any way to fix this? This is something I use every day.
I am on an iPad 2, 32gb, wifi...
Thank you

My Photos app works the same on iOS 5 as it did on iOS 4 i.e. I can have a different track for each album. When I select a track for a photo album I then start the slideshow so that it shows the first couple of photos with the track playing - I'm not sure it's necessary to start the slideshow but I always do and it remembers that track for that album.

In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

Nic, for me the iTunes window looks like this, when I connect my iPad 3:
I select the iPad in the "devices" section of the Sidebar (use: "View > Show Sidebar" if the sidebar is hidden).
Click the "Apps" tab in the "Devices" pane.
Scroll all the way down in the Devices pane to "File Sharing" "Apps" section.
Then do I click "GarageBand" to select the documents in the right panel.
Which part is different for you? Perhaps you could post a screenshot?
Regards
Léonie

Work around for User ID 32 character limitation in CCX Agent?

Are there any kind of creative work arounds for getting past the ridiculous 32 character limit when logging into the CCX Agent?
We are moving toward using the User Principal Name (UPN) in CUCM LDAP which means that the domain is now tacked onto the end of their existing User IDs. We are doing this so that users from multiple domains can authenticate to various Cisco tools and apps. It works very well, except when firing up the Agent!
I've already been playing around with UPN suffixes, and while I can get them to show up in CUCM (and subsequently), I can't seem to get them to authenticate.
I shouldn't even have to get this creative, just remove the 32 character limit, Cisco!
We are running CCX 8.5 and CUCM 8.6

Hi ,
I am not aware about any such workarounds.
After referring to the below guide,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/configuration/guide/uccx851ag.pdf
On page 78, it is mentioned as,
Caution : When logging into Cisco Agent Desktop, agents use the Unified CM user ID and password. While the Unified CM limits agent IDs to 128 alphanumeric characters, the Unified CCX limits agent IDs to 31 alphanumeric characters. Be sure to abide by the 31 character-limit when configuring agents in Unified CM.
I am sure even if it works by some workarounds also, you may see some issues specially from the CAD\CSD\CDA side, which Cisco will not support it quoting the same above reason.
Hope it helps,
Anand
Please Rate helpful posts !!

Work around for Application.cfc

I have an Application.cfc file that outputs a header and footer page for every request. That works wonderful but if I try to open a page that is doing a <cfgrid> using a CFC file than I get an error of "Error invoking CFC /GATS/CFC/purchaseOrder.cfc : Internal Server Error [Enable debugging by adding 'cfdebug' to your URL parameters to see more information]" when opening the page.
Commenting out the header/footer include in the Application.cfc file lets the <cfgrid> populate with the CFC file. Is there a fix or work around for this?
Application.cfc file
<cfcomponent output="false">
<cffunction name="onRequestStart" returnType="boolean" output="true">
      <cfargument name="thePage" type="string" required="yes">
     <cfset PageName = GetFileFromPath(thePage)>
    <cfif not IsDefined("session.user.isAuthenticated") or
          session.user.isAuthenticated equal session.no>
      <cfif FindNoCase('index.cfm', PageName) is not 0>
        <cfelse>
          <cfset session.messages[1] = "Authentication required.">
          <cflocation url="#application.WebAddress#" addtoken="no">
      </cfif>
    </cfif>
    <cfif FindNoCase('index.cfm', PageName) is not 0>
      <cfset request.PageNavigation = "">
      <cfset request.Screen = "Login">
    </cfif>
    <cfif FindNoCase('mainMenu.cfm', PageName) is not 0>
      <cfset request.PageNavigation = "Home">
      <cfset request.Screen = "">
    </cfif>
    <cfif FindNoCase('purchaseOrder.cfm', PageName) is not 0>
      <cfset request.PageNavigation = '<a href="mainMenu.cfm">Home</a> &##8226; New Purchase Order'>
      <cfset request.Screen = "">
    </cfif>
    <cfif FindNoCase('logout.cfm', PageName) is not 0>
      <cfelse>
        <cfinclude template="includes/header.cfm">
    </cfif>
    <cfreturn true>
</cffunction>
<cffunction name="onRequestEnd" returnType="void" output="true">
      <cfargument name="thePage" type="string" required="yes">
    <cfset PageName = GetFileFromPath(thePage)>
    <cfif FindNoCase('logout.cfm', PageName) is not 0>
      <cfelse>
        <cfinclude template="includes/footer.cfm">
    </cfif>
</cffunction>
</cfcomponent>
purchaseOrder.cfm
<cfgrid name="AccountGrid" format="html" bind="cfc:GATS.CFC.purchaseOrder.GetQuantities({cfgridpage},{cfgridpagesize}, {cfgridsortcolumn}, {cfgridsortdirection})">
<cfgridcolumn name="ID" header="ID" display="yes">
<cfgridcolumn name="vendor_name" header="Name" display="yes">
</cfgrid>
I found this on the web:
That error is due to our application.cfm having a single HTML comment at the
start of the file. Apparently if your Application.cfm or Application.cfc file
outputs ANYTHING, binds to CFCs with AJAX (via HTML CFGRID or CFAJAXPROXY, for
example) do not work. The CFC will be called, but the data from it will never
"flow" into the CFGRID. Removing the comment from the Application.cfm file took
care of our CFGRID issue.
This there a way to have an Application.cfc file that displays a header and footer for every page and have and
have a page have a <cfgrid> in it?

BKBK,
I created the examples you posted and commenting out the header/footer lines in my Application.cfc displayed the cfgrid results (updating the query to a table I had). Running the same example code with the header/footer included in the Application.cfc would not show the cfgrid results.
I attached the Application.cfc file for review.
Couldn't attach the file.
Application.cfc
<cfcomponent output="yes">
<cfset this.name = "GATS">
<cfset this.clientmanagement = "true">
<cfset this.applicationtimeout = CreateTimeSpan("0","0","20","0")>
<cfset this.sessionmanagement = "true">
<cfset this.sessiontimeout = CreateTimeSpan("0","0","20","0")>
<cfset this.scriptProtect = "true">
<cfparam name="session.yes" default="Yes">
<cfparam name="session.no" default="No">
<cffunction name="onApplicationStart" returnType="boolean" output="no">
    <cfset application.Directory = "/GATS/">
    <cfset application.Datasource = "IA-webapplications">
    <cfset application.DatasourceGATS = "SBS-GATS">
    <cfreturn true>
</cffunction>
<cffunction name="onApplicationEnd" returntype="void" output="no">
    <cfargument name="ApplicationScope" required="yes" />
</cffunction>
<cffunction name="onSessionStart" returntype="void" output="no">
    <cflock scope="session" timeout="5" type="exclusive">
      <cfset session.no = "No">
      <cfset session.yes = "Yes">
      <cfset session.new = "New">
      <cfset session.user = StructNew()>
      <cfset session.user.isAuthenticated = session.no>
      <cfset session.user.emplid = "">
      <cfset session.user.userSSOId = "">
      <cfset session.user.firstName = "">
      <cfset session.user.lastName = "">
      <cfset session.user.name = "">
      <cfset session.messages = ArrayNew(1)>
      <cfset session.savedInputValues = ArrayNew(1)>
      <cfset session.filesTransferred = "">
    </cflock>
</cffunction>
<cffunction name="onSessionEnd" returntype="void" output="no">
    <cfargument name="SessionScope" required="yes">
    <cflock scope="session" timeout="5" type="exclusive">
      <cfset Arguments.SessionScope.user.isAuthenticated = session.no>
      <cfset Arguments.SessionScope.users.emplid = "">
      <cfset Arguments.SessionScope.user.userSSOId = "">
      <cfset Arguments.SessionScope.user.firstName = "">
      <cfset Arguments.SessionScope.user.lastName = "">
      <cfset Arguments.SessionScope.user.name = "">
    </cflock>
</cffunction>
<cffunction name="onRequestStart" returntype="void" output="yes">
    <cfargument type="String" name="TargetPage" required="yes">
    <cfset PageName = GetFileFromPath(TargetPage)>
    <cfif not IsDefined("session.user.isAuthenticated") or
          session.user.isAuthenticated equal session.no>
      <cfif FindNoCase('index.cfm', PageName) is not 0>
        <cfelse>
          <cfset session.messages[1] = "Authentication required.">
          <cflocation url="#application.WebAddress#" addtoken="no">
      </cfif>
    </cfif>
    <cfif FindNoCase('index.cfm', PageName) is not 0>
      <cfset request.PageNavigation = "">
      <cfset request.Screen = "Login">
    </cfif>
    <cfif FindNoCase('mainMenu.cfm', PageName) is not 0>
      <cfset request.PageNavigation = "Home">
      <cfset request.Screen = "">
    </cfif>
    <cfif FindNoCase('purchaseOrder.cfm', PageName) is not 0>
      <cfset request.PageNavigation = '<a href="mainMenu.cfm">Home</a> &##8226; New Purchase Order'>
      <cfset request.Screen = "">
    </cfif>
    <cfif FindNoCase('logout.cfm', PageName) is not 0>
      <cfelse>
        <cfinclude template="includes/header.cfm">
    </cfif>
</cffunction>
<cffunction name="onRequestEnd" returntype="void" output="yes">
    <cfargument type="String" name="TargetPage" required="yes">
    <cfset PageName = GetFileFromPath(TargetPage)>
    <cfif FindNoCase('logout.cfm', PageName) is not 0>
      <cfelse>
        <cfinclude template="includes/footer.cfm">
    </cfif>
    <cfif FindNoCase('sessionTerminated.cfm', PageName) is not 0>
      <cfinvoke method="onSessionEnd">
        <cfinvokeargument name="SessionScope" value="#session#">
      </cfinvoke>
    </cfif>
</cffunction>
<cffunction name="onError" returnType="void" output="no">
    <cfargument name="exception" required="true">
    <cfargument name="eventName" type="string" required="true">
    <cfthrow object="#arguments.exception#">
</cffunction>
</cfcomponent>

Is there a work around for my Akai Pro EIE Pro interface to work with mountain lion

Does anyone have a work around for the Akai EIE Pro Audio interface that just stopped working after the mountain lion upgrade. Akai has no response currently.

Yep,
They say they're working on it.
It ***** though
effo

How do I delete more than 1 slide at a time from the custom slide show in Elements 8

How do I Delete more than 1 slide at a time from the custom slide show in Elements 8?

How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
 Cheers, Tom

How do I select a song from my ITunes Library and apply to a picture folder for a slide show?

How do I selcet a song from my ITunes library and apply it to a picture folder for a slide show. I have a PC, not a Mac.

Short answer:
Click Hide Song(s), it is what you wanted to do...
Long answer:
iTunes in the Cloud is a feature of your iTunes store account that allows you to redownload or stream your past purchases. When you delete a purchased track that is downloaded to your computer (like the first one shown here) you are asked if you also want to hide the song from iCloud. This would remove it from the computer and also stop it showing up with the iCloud symbol as the other tracks from that album (which are not downloaded) do.
If a track shows with the cloud symbol you can play (stream) it by double-clicking the title, or click the cloud symbol to download a local copy to your library. If you try to delete one of these tracks you get a slightly different message confirming that you want to hide the track. Clicking hide will remove the listing from the library and any other device that shows your past purchases.
Should you want to retrieve any item hidden in this way at a later date use Store > View My Account > iTunes in the Cloud > Hidden Purchases > Manage.
To hide all your previous purchases that are not downloaded to your computer use Edit > Preferences > Store and untick Show iTunes in the Cloud purchases.
tt2

Work around for shared calendars

Has anyone found a work around for shared calendars yet? This has to be one of the biggest downfalls of the iPhone, along with the fact it can't search in the mail app.
If anyone ahs found a work around I'd be very keen to here it.

I have not used this product but it sounds like it may be able to do what you want.
http://www.busymac.com/index.html

Work Around For Numbers Crashing

Work Around For Numbers Users:
For those of us who have numbers and have had problems with it crashing when scrolling across sheets that have checkboxes try this: Double select a cell, and use the expanding group to navigate the sheet. It seems to be stable when doing this.
3 weeks after the os8 release and still no fix for this? Pathetic.

If anyone has been having trouble with upgrading the domain file and iWeb crashes, here is the fix that worked for me:
http://discussions.apple.com/message.jspa?messageID=5100025#5100025
*MAKE SURE YOU BACKUP YOUR DOMAIN FILES FIRST!*

Work around for 60 column limitation

All,
Does anyone know of a work around for the 60 column table limitation?
Will this be changed in a future release?
Thank you.

I also need a workaround for this. I have users that want to download data as excel files, and the built in export to csv was working great until the dynamic sql statement pushed itself to more then 60 columns. Is there some other way to provide a link to the data as csv? Can I hook into the csv functionality of HTML DB? Can I create a page template that modifies the Content-Disposition and/or Content-Type so the browser thinks the page is csv/excel so that I could dump out a clob of data I put together? Should I just have a button that provides a link to something outside HTML DB to query and dump data from the database?
As it is, the users really don't need to see the data on the screen. I just need a way to dump 60+ columns of data to the user as csv.

Work around for Excel's array formulae?

I have an Excel spreadsheet which I have built over many years to manage maintenance tasks of my boat. I would like to convert this to run on Numbers. Unfortunately I can't find a work-around for Excel's "Array Formulas".
The column headers of my spreadsheet contain maintenance tasks (plus data on how frequently by days or engine hours these jobs need to done). When I complete a maintenance task, I log the date and engine hours in a new row with an "x" to signify that the job is done. Excel then looks up the date/engine hours when each job was last done (ie the lowest "x") and then uses conditional formatting to highlight the column headers of which jobs are overdue. Is there a work around for this in Numbers?
I attach an image shot of my Excel spreadsheet which may help:

Hi Rich,
Some made-up dates.
If you have multiple x's in a column, change all but the most recent to "Done" or something other than x This approach looks for the date in Column A that matches a single x in a task column.
This example works on years. I hope you change your oil and filter more often .
One Header Row and four Footer Rows. Enter Years between services (D9) from the keyboard.
To find the date of the last service (the only x in Column D)
D10 contains this formula:
=INDEX($A,MATCH("x",D,0))
You can Fill Right to other columns.
"Years since" (D11) contains this formula:
=YEAR(TODAY())-YEAR(D10)
"Alert" (D12) contains this formula:
=IF(D11>D9,"Hey, You!", "OK")
Conditional Formatting in D12 sets the text to red if it equals "Hey, You!"
It would be best to combine these steps into one complex formula. Numbers is slowed down with each Header or Footer in a Table.
Regards,
Ian.

Work around for Custom Slide Show

Similar Messages

Maybe you are looking for