Work around for including Non cumulative cube in an infoset.

Hi Experts,
I have 4 non cumulative infocube in my production, for another reporting purpose I have to use those non-cumulative cubes combining another  DSO in an infoset, but the infoset is not allowing me to include non cumulative infocube in it.
The non-cumulative infocube contains 2 non cumulative keyfigures, those keyfigures are needed for my new reporting, to get the infoset logic(inner join) is there any other possible way to get the data ?
Please let me know. your valuable input will be appreciated. Thanks in Advance.

Hi Kalpana,
Try with multiprovider.
Otherway round could be creating DSO and creating transformation from DSO as well as non-cumulative infocubes (full update) and report on newly created DSO.
Hope that helps.
Regards
Mr Kapadia
*Assigning points is the way to say thanks*

Similar Messages

  • BI Accelerator  - Non Cumulative cube

    Experts,
    I have to create BIA on inventory cubes which is non cumulative..will the performance work in case of non cumulative cubes for BI acceleraot indexes??

    Check the latest...
    https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/library/uuid/11c4b71d-0a01-0010-5ca0-aadc2415b137
    Question
    Are there any restrictions for InfoCubes that are not appropriate for the BI Accelerator?
    Answer
    No. All InfoCubes can be used in conjunction with the BI Accelerator. The former restrictions for non-cumulative key figures do not exist anymore.
    Hope it Helps
    Chetan
    @CP..

  • Query for Future period on a non cumulative cube

    Hi Colleagues,
    I have a non cumulative cube. It has data till June,2006. When I query on the cube to report the balance with period as "July,2006" it doesnot return anything. What I expected is that it would show me the balance value as of June,2006 which is the last period for which there is data.
    Am I missing anything ?
    Regards,
    priyadarshi

    If you filter by jul06 and there is no data in cube, no matches with selection happens. You need to select any data to apply calculation of balance, try to select a range of months, with an offset.
    Maybe if you put the month in free characteristics instead in filter section ir worked.

  • Validity slice is not correct for non-cumulative cube

    Hello Expert,
    There are two non-cumulative cube, say cube1 and cube2. Cube2 has only one more dimension of PLANT than Cube1.
    Cube2 is copied from cube1 and change the char of validity.
    Cube1 & cube2 use the same fill data source. That is, first load with opening balance and second with delta.
    char of validity for cube1: calendar day & material
    char of validity for cube2: calendar day & plant.
    The query based on cube1 works well. To say cube2, the validity slice(in TXN RSDV or TBL /BIC/TCUBE2) is not correct. There is only one record which contains BLANK plant.
    There are plants in F table.
    I tried the following steps to recovery the validity slice, however, it made no sense.
    1) PGM RSDG_CUBE_VALT_MODIFY to rebuild the validity slice structure
    2) FM RSDV_VALID_RECREATE with I_REBUILD_FROM_FACT = 'X' to create validity slice from fact table.
    Would you please suggest?
    Thanks
    XY

    Hi XY,
    For sure, running the RSDV_VALID_RECREATE function module in SE37 will recreate the validity table. And you can use the parameter "X"  in the parameter I_REBUILD_FROM_FACT if the entire fact table should be  read.
    Also, to change the validity slice manually in tcode RSDV you should:
    - overwrite the column 'To mode' with a 'F', which mean Fixed
    - & then the 'Fixed to time' with your new value.
    There is a program which allows you to modify it: Program   > RSDG_CUBE_VALT_MODIFY
    At
    Nadja Xavier

  • Any work-around for non-Lion-supported HP LaserJet printer?

    I just upgraded to Lion, and while love many of the features (the new mail app is great), I just discovered that my 6-month-old HP LaserJet CP1525nw printer apparently isn't compatible with Lion. Does anyone have any work-arounds for generic drivers that might resolve this. As inexpensive as Lion is, I'd hate to have to buy a new printer just so I can take advantage of Lion funcationality and full iCloud capabilities. Thanks.

    In preparing to install the drivers for the CP1510 series, I decided to download and reinstall the package for the CP1520 series. First, I also installed the firmware update, which had been released since I purchased my printer. Then I reinstalled the drivers using System Preferences, etc.
    Lo and behold, the printer now works. For some reason, after the upgrade to Lion, the drivers for my CP1525nw stopped working, even though all of my other printers (1610, 2510, 2610, 2605dn)  performed just fine without any jiggering after the Lion upgrade.
    Curiously, my first attempt to download the software package for the CP1525nw wouldn't download, launching a dialog that says the driver isn't supported for this operating system. The HP website does not include the CP1525nw in the list of supported LaserJets, but elsewhere paradoxically claims all printers supported for Snow Leopard should also run on Lion, which appears to be true for the CP1525nw.
    Go figure. Anyway, thanks for the suggestion. It got me headed in the right direction.

  • Include non-cumulative key figure in InfoSpoke

    Hi Experts,
    I am trying to create InfoSpoke for AR Line Item Cube(0FIAR_C03) with all infoObjects.
    This includes non-cumulative key figures such as
    0DSCT_DAYS1 (Days for first cash discount)
    0DSCT_PCT1 (Percentage for first cash discount)
    However, InfoSpoke run failed and following messages is displayed.
    “Error in SQL Statement: SAPSQL_ILLEGAL_AGGREGATE NOP”
    Does the infoSpoke not support non-cumulative key figures?
    It worked fine when I remove all the non-cumulative key figures from the InfoSpoke.
    *I certainly set 1 for 0RECORDTP(Record Type) in the selection tab as SAP Help instructed
    Thank you for your answers in advance.

    Try OSS Note Number: 850428.

  • Work around for server not found problems on FF36

    I have found a work around for all the people having server not found problems with FF36.
    If you manually set your network adapter DNS to an external DNS server (as opposed to your local ISP) then the problem goes away. I set mine to use the two google DNS servers:
    Preferred: 8.8.8.8
    Alternate: 8.8.4.4
    Not a clue why this works but it is 100% successful on my desktop PC, whereas before I could hardly connect to a webpage with FF36 without multiple page refreshes and much frustration, even though FF35 was fine and rolling back to FF35 was also fine.
    Something has changed in FF36 and either the way it handles DNS or the way it works with some network adapters.
    It is nothing to do with add-ons, profiles or firewall software as I have tried all of these things and only the DNS change made a difference. I even copied over a full working profile and the program files directory for Mozilla from my portable which was having no problems and the problem still existed on the desktop, which is why I started looking at the network adapater since everything else between the working PC and the non working one was identical.
    Hopefully this will help the developers to pin down the real cause of the problem and fix it in the next release.

    Well done. Thanks for finding that.
    That is not only assigned but has an approved patch included in the scheduled Fx36.0.1 release so it should be fixed in few days, watch out for the upgrade.
    * Bug 1093983 - DNS resolver should not use 'ANY' to get cached records for TTL <sup>[https://bugzilla.mozilla.org/show_bug.cgi?id=1093983#c35 c#35]</sup>
    * https://wiki.mozilla.org/Firefox/Channels/Meetings/2015-03-03#Schedule_Update
    With the bug now fixed it would not really be appropriate to add further comment. I do now see another related bug assigned but not being fast tracked, so if all goes well that will probably land in Firefox 39.
    * Bug 1138242 - DNS: Request A and AAAA record types rather than ANY when obtaining TTL on Windows

  • Activation error on Multi Provider which has Non-cumulative Cube

    Hi,
    My company has upgraded the BI 7.0 from 3.5.
    It is working fine so far.
    But I met the below message and could not activate it when I generate the multi provider which has Non-cumulative Cube.
    Define the characteristics of the validity table for non-cumulatives (Message no. R7846)
    And then I checked the Single cube but Single cube has no error.
    I think this is program error and searched the notes in OSS but could not find.
    Does any expert know this issue?
    Thank you.

    Hi lee,
    validity slice tables need to be defined for cubes using non cumulative key figures.
    In this we need to specify the characteristic combination on which this table has be maintained.
    The maintanence can be done from cube change mode, menu bar extras--> maintain non cumulative values.
    This table constantly gets updated with validity dates as we upload data.
    An report on this can be seen in tcode RSDV.
    Naveen.A

  • Compress non-cumulative cube

    Hi Gurus! I'm working on a retail project. I've created an infocube based on 0RT_C36 to keep the stock movements. It is a non-cumulative cube.
    After the load of the initialization data (2lis_03_bx) the compression with the option "no marker update" unchecked runs fine. The process compress about 300.000 records in a few minutes.
    But after the load of historical movements, the initialization of 2lis_03_bf, the compression with the option "no marker update" checked runs for more than 10 hours. There are 400.000 records loaded in the fact table (F table). I've checked in ST22, ST21 and no errors or dumps appear. In SM50 the process was running and the number of inserted records was 250.000. After that the basis gay kill the compression...
    Is it normal? Is there anything I can check to speed up the process?
    Thanks!

    Hi Federico,
    This a common problem.
    You can find also another message in this Forum section with the same problem.
    You need to restrict the number of the request that you are going to compress for every job. Try also to enlarge TableSpace, in particular the temporary TableSpace, that you can subsequently reduce.
    Consider that any other job, like query from user or other uploads, reduce the speedof the compression.
    Ciao.
    Riccardo.

  • How can I  extract non-cumulative cube data to another cubes ?

    Dear Expert,
             I copied inventory cube 0ic_c03 to  a new cube : ZIC_C03  , then I loaded the data of 0ic_c03 to the new cube ZIC_C03 . 
    the loading was sucessful, but  the result of  report of the ZIC_C03 was not correct. After looking into the problem, I found out
    the new cube can successfully extract data related with "Goods movement" & "Revaluation", yet the extract of "Open Balance" does not seems to work.
             I have read through Note:375098, in which I could not find (InfoObject 0RECORDTP) in my start routine as mentioned in the solution
    ,and the note was not mentioned valid for BW 3.5 release.
             How can I  extract non-cumulative cube data to another cubes correctly in BW3.5 release SP20? 
       Thanks !

    Hi,
    Check Routines in Update rules wether same code is wrriten in  new cube
    cheers,
    Satya

  • Work around for JSF lack of XHMTL standards

    Has anyone come up with a work around for the fact that JSF cannot produce XHTML documents? Anyone know why they went this route?
    Thanks,
    David

    BTW, one more thing: the JSF RI uses the HTML/XHTML
    hybrid output strategy (output that works for both),
    but the JSF APIs are sufficient to let a single
    RenderKit output pure HTML and pure XHTML depending
    on (for example) the client's browser, without
    changing a single line of Renderer code!I don't quite understand how this "magic method" will help me get around the RI's insistence upon generating non-XHTML-compliant markup. UISelectBoolean rendered as a checkbox is an example:
    <input id="_id74:_id75:0:selected" type="checkbox" name="_id74:_id75:0:selected" checked />The offending code is found in HtmlResponseWriter, which renderes Boolean value attributes in a way incompatible with XML.
    I'd love to write my own XHTMLResponseWriter, but how do I plug it in? In order to overrwride createResponseWriter(), I have to create my own render kit. I can do that, but that doesn't help the existing RI CheckboxRenderer, which is already defined in another render kit.
    It seems a shame to have to write a completely new renderer when the existing RI CheckboxRenderer is logically sound---it just uses a faulty (as far as XHTML is concerned) response writer.
    Garret

  • Server 2003 R2 sp2 on IBM T42: is there a work-around for getting bluetooth to work?

    I have seen a few forums here and there talking about possible work-arounds for the lack of a bluetooth stack in server 2003, and they have not worked.
    The driver here:
    http://www-307.ibm.com/pc/support/site.wss/MIGR-50245.html
    Installs without compalint, but after reboot, cannot find a bluetooth device. The bluetooth service starts and runs happily.
    I found a hack-around solution involving update Q323183 for tricking 2003 into installing a bluetooth stack elsewhere, it also failed to return any results.
    Has anyone figured this one out?

    welcome to the forum!
    i had this working on my T42p back in the day but that was 6 years ago.   it installed using the driver from IBM and the MS BT stack.   i'm about 95% sure i was using the standard version of 2003 which by default includes a BT stack.   enterprise and datacenter do not since there's no logical reason for either one to be running bluetooth due to security risks.
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • Non cumulative cube

    hi,
    i have a problem in changing the fields in validity table.
    in cube
    i went to extras->maintain non cumulative values
    in that along with 0calday i have ticked two more fields.
    now i want to remove those fields from validity table.
    but if i click on change and went to 'maintain non cumulative values'
    it is in display mode.
    is there any way to add or remove a field from validity table?

    Hi,
    I have copied 0IC_C03 to zic_c03 and able to change the settings for 'Maintain non-cumulative values'.
    I feel in your case make the update rules inactive and try to change IC then i thnk u will able to change the values for 'Maintain non-cumulative values'.
    Hope the information is useful, if yes please provide points.
    Regards,
    Navi

  • Validity Table in Non cumulative cube

    Hi Friends,
    What is the use of validity table in Non cumulative cube?
    I have already studied the document 'How to Inventory
    Please can any one explain me with example.
    Thanks & Regards,
    Ramnaresh.P.

    Hi,
    Validity table is created for non-cumulative key values.
    Non cumulative key figures are one which are not possible to cumulate such as head count, inventory amount, these are always in relation to a point in time.
    Regards,
    Shiva.

  • Loading non Cumulative cube

    Hi BW Experts,
    How can I upload non cumulative cube's ?

    Hi Hoyer,
    Are requesting for steps ?
    Then :-
    1) Iniatialize opening balance in R/3 (S278)
    2) Activate extract structure MC03BF0 for data source 2LIS_03_BF
    3) Setup historical material documents in R/3
    4)Load opening balance using data source 2LIS_40_S278
    5)Load historical movements and compress without marker update
    6)Setup V3 Update
    7)Load deltas using 2LIS_03_BF
    TQ
    Kumar

Maybe you are looking for