Work around solutions

dear gurus,
    what is meant by work around solutions?can anyone please explain with few examples..
                                -guna

In SAP there is no method to capture the idle time of a machine.This is very important to calcualate the utilisation of a mahchine - on which we can see where we are loosing the time .
So what we can do is do a operation confirmaiton without a zero confirmation quantity.
have a separte production order created without material and do confirmation against this.
So theese are few methods or workarounds on which we can capture the idle time and then using some z develoopments we willbe able to make a report
kindly let me know if you still have doubts.

Similar Messages

  • Temporary work around solution to no black print Photosmart 6515

    After exhaustive research I am passing on a work around that actually got the black back:  change your 6515 driver to a Photosmart 3300 driver. No color, but it prints black now.  If anyone has a driver that works better please let me know!

    The black ink used in the Photosmart 6515 is pigmented and not compatible with photo paper.  Do you have photo paper selected in the Photosmart 3300 driver settings?  In this case it would appear black is printing but the printer will actually use the dye based color inks to mix and make "black".
    I see from your other thread that you have gone through the standard troubleshooting steps and black is not printing properly on your test pages.  I will ask to have one of the HP Support folks step into this thread, they may have other alternatives.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Getting a "sticky" for all LP8 problems and work arounds/solutions?

    Any chance we could get a sticky on this? It would be a lot faster than going thru the "Search Forum" option.
    List the known issues
    List the fix/work around for the issue
    Rob

    We asked for that in the L7 forum for years and got little in terms of a response (see below). And definitely no sticky!
    Sure, there are a few knowledge base documents that describe issues with L8, but in general, acknowledging known problems is not something Apple does, unfortunately. How do I know this? Well, experience. And also, from what they have to say about their software in the Getting Started guide:
    "Experience has shown that such system _problems are rarely caused by a defect in Apple programs or hardware products_. All Apple hardware and software is _rigorously tested_ by a diverse range of musicians and studio users, from a variety of fields and uses, who look for any faults or problems.
    This doesn’t mean that the possibility of errors can be completely ruled out; problems can crop up periodically. This is not unexpected—as the various applications, operating system versions, and drivers—are all developed, and improved in parallel by unrelated programming teams. This can lead to occasional compatibility problems. _Apple provides fixes in the form of software updates, as soon as such problems are identified._ Apple is always grateful to users who report any problems."
    (emphasis added by iSchwartz)
    If that isn't a profound mixture of truths, half-truths, and flat-out lies.
    Now... there is some kind of "tips" board somewhere amongst Apple's Discussion Forums. When the subject of having a sticky came up once on the L7 board a while ago, a mod suggested that I submit tips/workarounds for inclusion on that board. I checked it out and it's a freekin' nightmare to find anything. And "submitting" tips means that someone has to approve it, and who knows if that person would be Logic-savvy or not. So there it is...

  • Airport cannot be turned on, after trying all work around solutions

    As with many others in this forum, I have been suffering from this problem since upgrading to 10.6. I have tried all suggestions in this forum, but the only "workable" way I found so far is to reboot my Macbook Pro. Usually it backs to work after one reboot, but does not work again the next time. Here is the log I see:
    ====Log Started====
    Sep 5 23:10:21 wukong kernel[0]: Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 20607: 0 == (RREG(pi->wlchw->osh, &pi->regs->maccontrol) & MCTLENMAC)
    Sep 5 23:10:21: --- last message repeated 1 time ---
    Sep 5 23:10:21 wukong kernel[0]: Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 47090: (readphyreg(pi, NPHY_RfseqStatus) & status_mask) == 0
    Sep 5 23:10:21: --- last message repeated 1 time ---
    Sep 5 23:10:21 wukong kernel[0]: Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 20607: 0 == (RREG(pi->wlchw->osh, &pi->regs->maccontrol) & MCTLENMAC)
    Sep 5 23:10:23: --- last message repeated 1 time ---
    Sep 5 23:10:23 wukong kernel[0]: Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 47090: (readphyreg(pi, NPHY_RfseqStatus) & status_mask) == 0
    Sep 5 23:10:23: --- last message repeated 1 time ---
    Sep 5 23:10:23 wukong kernel[0]: Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 20607: 0 == (RREG(pi->wlchw->osh, &pi->regs->maccontrol) & MCTLENMAC)
    Sep 5 23:10:23: --- last message repeated 1 time ---
    Sep 5 23:10:23 wukong kernel[0]: Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 47090: (readphyreg(pi, NPHY_RfseqStatus) & status_mask) == 0
    Sep 5 23:10:23: --- last message repeated 1 time ---
    Sep 5 23:10:23 wukong kernel[0]: Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 30702: (RREG(pi->wlchw->osh, &pi->regs->maccontrol) & MCTLENMAC) == 0
    Sep 5 23:10:23: --- last message repeated 1 time ---
    Sep 5 23:10:23 wukong kernel[0]: Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 3437: (RREG(wlchw->osh, &wlc_hw->regs->maccontrol) & MCTLENMAC) == 0
    Sep 5 23:10:23: --- last message repeated 1 time ---
    Sep 5 23:10:23 wukong kernel[0]: Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5318: !(mc & MCTLPSM_JMP0)
    Sep 5 23:10:23: --- last message repeated 1 time ---
    Sep 5 23:10:23 wukong kernel[0]: Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5319: !(mc & MCTLENMAC)
    Sep 5 23:10:23: --- last message repeated 1 time ---
    Sep 5 23:10:23 wukong kernel[0]: Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5327: !(mc & MCTLPSM_JMP0)
    Sep 5 23:10:23: --- last message repeated 1 time ---
    Sep 5 23:10:23 wukong kernel[0]: Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5332: !(mi & MI_MACSSPNDD)
    Sep 5 23:10:23: --- last message repeated 1 time ---
    Sep 5 23:10:23 wukong kernel[0]: AirPort: Link Down on en1. Reason 3 (Deauthenticated because station leaving).
    ====Log Ended====
    Hope it helps Apple engineers debug this problem and get it fixed in 10.6.1. It is very very annoying.

    Similar problem here, but for me it started sometime around 2 months ago (with 10.5.7 or 10.5.8).
    And it still happens with cleanly installed 10.6.
    My symptoms are:
    - AirPort is silently turned off mostly after waking up from sleep. (note that 'turned off' is different from 'no signal')
    - It does not always occur, but I cannot figure out the condition.
    - Once it happens, there is no way to turn it back on (adding new location, re-ordering network interfaces, etc. didn't work at all).
    - AirPort is usually back on after rebooting, but sometimes I need to reset SMC or PRAM to make it enabled again.
    And yes, it is very very annoying.
    Here's my log, FYI.
    09/09/10 23:43:22 kernel wl0: PSM microcode watchdog fired at 281 (seconds)
    09/09/10 23:43:22 kernel psmdebug 0x00ed80bb, phydebug 0x00000000, psm_brc 0x00000001
    09/09/10 23:43:22 kernel wepctl 0x00000300, pcmctl 0x00000300, pcmstat 0x00004000
    09/09/10 23:43:22 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 839: "PSM Watchdog" && 0
    09/09/10 23:43:22 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 839: "PSM Watchdog" && 0
    09/09/10 23:43:22 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:22 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:22 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:22 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:23 kernel s/wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:23 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:23 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:23 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:23 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:23 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:24 kernel s/wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:24 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:24 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:24 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:24 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:24 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:24 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:24 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:24 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:24 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:24 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:24 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:24 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:24 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:25 kernel /wl/sys/wlc.c", line 11750: wlcpscheck(wlc)
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 11750: wlcpscheck(wlc)
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:25 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:26 kernel rtDriverBrcm4311-410.91.20/src/wl/sys/wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:26 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:27 kernel s/wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:27 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:27 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:27 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:27 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:27 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:27 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:27 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:27 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:27 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:27 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:27 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:27 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:27 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:28 kernel s/wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:28 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:28 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:28 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:28 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:28 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:28 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:28 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:28 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:28 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:28 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:28 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:28 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:28 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:29 kernel s/wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:29 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:29 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:29 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:29 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:29 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:30 kernel s/wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:30 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:30 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:30 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:30 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:30 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:30 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:30 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:30 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:30 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:30 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:30 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:30 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:30 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:31 kernel s/wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:31 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:31 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:31 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:31 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:31 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:31 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:31 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:31 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:31 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:31 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:31 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:31 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:31 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:32 kernel s/wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:32 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:32 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:32 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:32 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:32 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:32 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:32 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:32 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:32 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:32 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:32 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:32 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:32 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:33 kernel s/wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:33 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:33 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:33 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:33 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:33 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:33 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:33 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:33 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:33 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:33 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:33 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:33 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:33 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:34 kernel d: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:34 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:35 kernel s/wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:35 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:36 kernel s/wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:36 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:37 kernel s/wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:37 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:37 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:37 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:37 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:37 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:37 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:37 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:37 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:37 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:37 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:37 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc.c", line 3301: res
    09/09/10 23:43:37 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:37 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 897: wlcpscheck(wlc)
    09/09/10 23:43:39 kernel line 15560: sicore_sflags(pi->wlchw->sih, 0, 0) & SISF_FCLKA
    09/09/10 23:43:39 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 15560: sicore_sflags(pi->wlchw->sih, 0, 0) & SISF_FCLKA
    09/09/10 23:43:39 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 47090: (readphyreg(pi, NPHY_RfseqStatus) & status_mask) == 0
    09/09/10 23:43:39 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 47090: (readphyreg(pi, NPHY_RfseqStatus) & status_mask) == 0
    09/09/10 23:43:39 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 47090: (readphyreg(pi, NPHY_RfseqStatus) & status_mask) == 0
    09/09/10 23:43:39 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 47090: (readphyreg(pi, NPHY_RfseqStatus) & status_mask) == 0
    09/09/10 23:43:39 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 20607: 0 == (RREG(pi->wlchw->osh, &pi->regs->maccontrol) & MCTLENMAC)
    09/09/10 23:43:39 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 20607: 0 == (RREG(pi->wlchw->osh, &pi->regs->maccontrol) & MCTLENMAC)
    09/09/10 23:43:40 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 47090: (readphyreg(pi, NPHY_RfseqStatus) & status_mask) == 0
    09/09/10 23:43:40 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 47090: (readphyreg(pi, NPHY_RfseqStatus) & status_mask) == 0
    09/09/10 23:43:40 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 20607: 0 == (RREG(pi->wlchw->osh, &pi->regs->maccontrol) & MCTLENMAC)
    09/09/10 23:43:40 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 20607: 0 == (RREG(pi->wlchw->osh, &pi->regs->maccontrol) & MCTLENMAC)
    09/09/10 23:43:40 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 47090: (readphyreg(pi, NPHY_RfseqStatus) & status_mask) == 0
    09/09/10 23:43:40 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 47090: (readphyreg(pi, NPHY_RfseqStatus) & status_mask) == 0
    09/09/10 23:43:40 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 20607: 0 == (RREG(pi->wlchw->osh, &pi->regs->maccontrol) & MCTLENMAC)
    09/09/10 23:43:40 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 20607: 0 == (RREG(pi->wlchw->osh, &pi->regs->maccontrol) & MCTLENMAC)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 47090: (readphyreg(pi, NPHY_RfseqStatus) & status_mask) == 0
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 47090: (readphyreg(pi, NPHY_RfseqStatus) & status_mask) == 0
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 30702: (RREG(pi->wlchw->osh, &pi->regs->maccontrol) & MCTLENMAC) == 0
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_phy.c", line 30702: (RREG(pi->wlchw->osh, &pi->regs->maccontrol) & MCTLENMAC) == 0
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5318: !(mc & MCTLPSM_JMP0)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5318: !(mc & MCTLPSM_JMP0)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5319: !(mc & MCTLENMAC)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5319: !(mc & MCTLENMAC)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5327: !(mc & MCTLPSM_JMP0)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5327: !(mc & MCTLPSM_JMP0)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5332: !(mi & MI_MACSSPNDD)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5332: !(mi & MI_MACSSPNDD)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5318: !(mc & MCTLPSM_JMP0)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5318: !(mc & MCTLPSM_JMP0)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5319: !(mc & MCTLENMAC)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5319: !(mc & MCTLENMAC)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5327: !(mc & MCTLPSM_JMP0)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5327: !(mc & MCTLPSM_JMP0)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5332: !(mi & MI_MACSSPNDD)
    09/09/10 23:43:41 kernel Assertion failed: file "/SourceCache/AirPortDriverBrcm4311/AirPortDriverBrcm4311-410.91.20/src/wl/sys/ wlc_bmac.c", line 5332: !(mi & MI_MACSSPNDD)
    09/09/10 23:43:49 Apple80211 framework[91] Scan() error 82 (Device power is off)
    09/09/10 23:43:49 Apple80211 framework[91] __performScan() failed (82)
    09/09/10 23:44:01 Apple80211 framework[91] Scan() error 82 (Device power is off)
    09/09/10 23:44:01 Apple80211 framework[91] __performScan() failed (82)

  • New Q-10 User - Complaints -- Looking for Work-Arounds

    BB OS 10 has a business path (through enterprise activation) and a personal path – so if you are using enterprise activation for business, you need to make sure your employer has the BES10 feature or it will not work.  And without this feature, I sense it impacts use of the device in many ways.
    Q10 does not have a deactivation feature to prevent deleting email from Outlook when one deletes email from the BB.  Very inefficient – I have to go thru email twice – once on Outlook and once on BB.
    Upon set-up, all Outlook contacts did not interface to the BB.
    When I accept calendar invites on the BB show up on the BB calendar, it reads it as "personal path" (see #1 above) and does not show up on the business path to register on my Outlook calendar.  This causes false availability highlighted on Outlook.
    Replying to email and accepting calendar invites on the BB do not show an indication of response/acceptance on Outlook.  This is very confusing, as I have to personally recall what I’ve replied to on the BB before filing on Outlook.
    I'm guessing I will have more difficulties...but these are major inefficient issues for me. If anyone has "work around solutions" here, please let me know.

    Hello scottjones92660;
    Welcome to the forums and thank you for your question.
    In response to your inquiries I have included the following response for your perusal;
    “BB OS 10 has a business path (through enterprise activation) and a personal path – so if you are using enterprise activation for business, you need to make sure your employer has the BES10 feature or it will not work.  And without this feature, I sense it impacts use of the device in many ways.”
    The BlackBerry 10 devices utilize ActiveSync to communicate\sync with end user mailboxes. Although the BlackBerry Enterprise Service 10 does provide security to devices and will setup and separate a Work Perimeter in addition to the Personal Perimeter, devices can also be activated strictly to ActiveSync only.
    “Q10 does not have a deactivation feature to prevent deleting email from Outlook when one deletes email from the BB.  Very inefficient – I have to go thru email twice – once on Outlook and once on BB.
    Upon set-up, all Outlook contacts did not interface to the BB.”
    I am unsure as to your question as it seems contradictory to your above statement. You state the Q-10 does not have a feature to prevent two-way synchronization of mail, which is typical of ActiveSync activated devices. You go on to say that this is inefficient as you have to go through mail on the mail client and on the device.
    The device is utilizing ActiveSync synchronization, as such what is deleted on device or mail client, will sync with the other. If this is not the case and what is deleted on the device or mail client is not syncing, it is possible you may have an incomplete activation. This may also allude to the issue that all contacts from the mailbox Contact Parent Folder did not sync to the device.
    “When I accept calendar invites on the BB show up on the BB calendar, it reads it as "personal path" (see #1 above) and does not show up on the business path to register on my Outlook calendar.  This causes false availability highlighted on Outlook.”
    When a device is activated on the BlackBerry Enterprise Service 10, the device calendar can be accessed from the Personal Perimeter as well as the Work Perimeter.
    The Free\Busy feature with ActiveSync is availability starts in version 14.0 With Microsoft Exchange Server 2010.
    If calendar invites are sent to and accepted by the corporate email account on a device that is activated on a BlackBerry Enterprise Service 10, they will be visible on both Perimeters.
    The following is a link to the BlackBerry Enterprise Service 10 guides and documentation and Microsoft ActiveSync;
    BlackBerry Enterprise Server 10
    Microsoft ActiveSync FAQ;
    Let us know if you have any further questions regarding this specific request.
    MAD-VIKING

  • Work around for request scope for Listitems-working

    Hi finally I got some work around solution for Listitems working with request scope, if any suggesion welcome, below is the small code of jsp and bean.
    <h:selectOneMenu id="ownerListMenu" value="#{pc_trackingSearchPage.trackingSearchPageBean.selectedOwner}">
                                            <f:selectItems value="#{pc_trackingSearchPage.trackingSearchPageBean.ownerList}" />
                                       </h:selectOneMenu>
    I used onPageLoadBegin() and onPagePost(),
    first on PageLoad - I am loading the List from DB, its displaying perfect.,
    than on pagePost -> I am setting the value ->ownerList.add(new SelectItem(getOwnerListMenu().getSubmittedValue().toString(),getOwnerListMenu().getSubmittedValue().toString()));
    ------->here is the getOwnerListMenu method.
         public HtmlSelectOneMenu getOwnerListMenu() {
              if (ownerListMenu == null) {
                   ownerListMenu =
                        (HtmlSelectOneMenu) findComponentInRoot("ownerListMenu");
              return ownerListMenu;
    so this way the List will not be empty what ever the user selectes it will be their, as i am setting key and values as same, so in submit method,
    i am getting the selected keys and going back to backend getting results displaying on other page,
    --->this will work only if they don't need the list , if they want to display the list again, they have to load freshelly.
    I hope it will give some solution for request scope, if the data is huge and not to save on the session for navigation purpose.
    suggestions welcome.
    Thanks
    srikanth
    Message was edited by:
    srikanthg

    Apperently iTunes 11 is not affected (Apple stil makes iTunes11 for the 14 yr old Microsoft XP OS, but not for anything PPCs can run. Go figure)
    "Next door" to Steve was metaphoric, he lived in Los Altos, about 15 miles away, but he cast a big shadow!
    On 9.2.1/10.4.11 differences, some time in the past someone selected 'save file' and checked the box 'don't ask again' on your computers dialog box. That's why you're not given a choice wih the file downloads. I would think that selection should be able to be reversed.
    iTunes 9.2.1/OS10.4.11 puts those downloaded URLs into the Music Libary of iTunes, no matter if it's opened directly, or you click on the file on your desktop. You can create a new playlist, highlight the selection in the Music Libary, and drag it to your new playlist to keep alll the steaming URLs together. NOTE, this only creates an alias, the URL copied by iTunes must remain in the Music Libary. You can then delete the the files on the desktop, if you want. I did multiple stations this way in 9.2.1, they all show in either the new playlist created, or in the Music Libary, and remain after the desktop files are deleted and trash emptied.
    You can switch sations by double clicking them. Another note, all the URLs were all from vtune.
    I hope this helps.
    PS, I forgot how clunky Tiger is compared to Leopard...

  • How do I work around incorrect capture scratch disk use estimates in FCP?

    Hi Everyone,
    I am trying to find a work around solution for FCP incorrectly estimating the space required on my capture scratch disk. I am using a Panasonic AJHD1400 to play back some DVCAM footage. I want to capture it 720x480 Anamorphic H264, via the firewire output on the deck. I am able to "free" capture the clip by hitting play on the deck and crash recording ("capture now") on the log and capture tool. From this process, I know the final captured file will be somewhere in the 3GB range, give or take. The clip is a little less than an hour long. I have 343 GB available on my scratch drive according to the information in the "Capture Settings" tab of the log and capture tool but according to the same info FCP thinks only 36.9 minutes of footage will fit on the disk. Consequently I can't log and capture the clip properly due to "insufficient disk space". What gives?
    Any suggestions and responses will be appreciated.
    Thanks in advance

    It isn't an Easy Setup per se. I modified the "generic capture" template in the capture preset editor to use DV video from the AJHD1400 as the "Digitizer" and set the "Compressor" to be h.264 at 100% quality.
    The whole point of the strange capture is for our sound editorial staff to edit to in pro tools. We don't have networked video storage for our audio department. If i capture in DV, the files are still like 20GB. using my "custom" settings I get a reasonably sized file that looks decent enough for the editors in a file that is small enough to fit on a data dvd if need be. I save rendering time as well.

  • Work around/Alternate solution for Oracle error  ORA-01460 and ORA-02063

    After the installation of Oracle.DataAccess version 2.111.7.20, I get the following error.(the code worked fine with Oracle.DataAccess version 9.2.0.700 )
    I have attached the error as well as the sample code.
    ORA-01460 and ORA-02063 are known bugs in the new ODP but would like to know if there is any Work around/Alternate solution for this problem(other than
    the use of stored procs)..
    Thanks!
    Error:
    ORA-01460: unimplemented or unreasonable conversion requested
    ORA-02063: preceding line from BSREAD_STAGINGRO at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure, Boolean bCheck)
    at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, String procedure, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, Boolean bCheck)
    at Oracle.DataAccess.Client.OracleCommand.ExecuteReader(Boolean requery, Boolean fillRequest, CommandBehavior behavior)
    at Oracle.DataAccess.Client.OracleCommand.ExecuteReader()
    SampleCode
    private bool isValidFieldData(string clientName, string fieldNumber, string uniqueID, string clientID)
    using (OracleConnection mBSConnection = new OracleConnection(mBSConnectionString))
    OracleDataReader oRdr = null;
    OracleCommand Valid_FieldData_Command = null;
    try
    Valid_FieldData_Command = new OracleCommand();
    Valid_FieldData_Command.Connection = mBSConnection;
    Valid_FieldData_Command.CommandText = "SELECT uniqueid FROM EXTDB.BSData WHERE agencyid = :agencyid and agencyname=:agencyname AND fieldnumber =:fieldnumber AND uniqueid = :uniqueid";
    Valid_FieldData_Command.Parameters.Add(":agencyid", OracleDbType.Varchar2, 255).Value = agencyID;
    Valid_FieldData_Command.Parameters.Add(":agencyname", OracleDbType.Varchar2, 255).Value = agencyName;
    Valid_FieldData_Command.Parameters.Add(":fieldnumber", OracleDbType.Varchar2, 255).Value = fieldNumber;
    Valid_FieldData_Command.Parameters.Add(":uniqueid", OracleDbType.Varchar2, 255).Value = uniqueID;
    mBSConnection.Open();
    oRdr = Valid_FieldData_Command.ExecuteReader(); ->Error occurs here
    The error occurs whenever the length of any of the parameter is increased. But there is no specific length where it is breaking down.
    For example in this case, it breaks down with the given error if
    agencyID > 8
    agencyName > 6
    fieldNumber > 9
    uniqueid > 6

    The problem was mapping input parameter type.
    VARCHAR2-type mapping input parameter works with String-type PF parameter. But CHAR-type won't.

  • Is there a solution or work around for flash player issues?

    Is there a solution, app or work around for flash player issues w/ iPad 2? Maybe even something in development?

    Browser apps such as Skyfire, iSwifter and Puffin 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, so you could try checking there for your sites (and there is the built-in YouTube app). But flash itself is unlikely to ever be supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/ , and Adobe have failed to create a version of flash that works on iOS
    There is a search box on the right-hand side of this page for further info.

  • Security settings changing. Is there a work around?

    Hello,
    I work for a "Company" that has ten's of thousands computers loaded with the latest version of Adobe Reader X. Unfortunately when we create a form in Adobe  Acrobat 9 Pro it cannot be signed by anyone using Adobe Reader X. Some how the security settings are changing when the form is open in Reader X. When the form is opened using Acrobat 9 Standard the form can be signed...the security settings have remain the same as when we built it in Pro. Is there a work around or something I have missed? This is a rather urgent issue as it will be effecting our whole "Company" and in the meantime we have been told to use another product until a solution is found. Your input is greatly appreciated!

    The usage rights must be enabled in Acrobat Pro.

  • Insane XML Import, Huge Project, Duplicate file names work around...

    I planned on kicking off my journey attempting to edit a massive multi year documentary on FCPX with a nice introduction of the blog I'm going to keep about the experience, but I've run into a bit of a roadblock, or maybe major speed bump at least before even getting to that point. I wanted to share what is working as a work around for me and you guys can tell me how I'm doing it wrong.
    Ok, I will try to explain this as succinctly as possible. I'll write in somewhat stream of consciousness just to try and get through it quicker... Basically, after discovering the work around below, I am now utterly confused on how FCPX handles the relationship between its own database of where media is stored, and the actual media itself. I have plenty experience on FCPX now, probably done 30-40 pro commercial jobs on it over the last year since XML became doable as I'm also a Resolve Colorist and all the FCPX projects where hardcore coloring product spots. For commercial work, I never needed to worry about splitting up footage up over multiple Events. Everything, all in one, FCPX handled it no problem. (well the occasional beach ball, but that seems to be a thing with FCPX in general)
    This will be my 10th feature documentary as an Editor. Every one before it was either on Avid's many flavors over the last 12 years or FCP Studio. When this new film came along, I made the decision a few months ago to use FCPX for a few reasons, but mostly because I'm insane and I like to try to mix it up for myself in a career that can get stale quick if you aren't willing to be that way. The film was shot over 2+ years, every shoot was multi cam 5D (yes i know, looks great, but please kill me), I haven't done the math on length, but there is over 10,000 clips of video (this is actually medium in size compared to what I've dealt with before). Its 5D, so theres external audio for everything. FCPX's syncing is great, but I've learned that theres an unsaid window of heads and tales clips must fall within to sync properly with the nearby clips, if they are too far apart FCPX gives up. One shoot day could have 3 cams, 50 clips each, and 2 audio files to sync to, FCPX simply cannot handle this, so off to Plural eyes they went, no problems.
    Ok, all this is relevant eventually I swear! Again, in the past, all in one event, no problem. I tried for fun to bring all media into one Event on this film. It worked, but there is a 10+ second spinning beach ball for every single move you make, so thats no good. Ok, I'll separate the Events out to, lets say, each shoot month. Well that's dumb, in verite documentary, any shot could be the first, any shot could be the last, you need a command over all searchable footage at all times. Shift selecting all events to search *****, and it actually takes longer for FCP to reload each event each time than it does to just have the one massive one. So no go there. Next hair brained idea... What if make a new Event that is just Compound Clips of all the other Event's contents and do more with Markers and Favorites in logging that I was planning to parse it all out. That way I'm working with and FCPX is dealing with 50-60 clips instead of 10,000+ Quick test, Cmd-A, Opt-G, boom, boom, boom, move all to dedicated to Event, hide huge Event, BEHOLD, that works! FCPX chokes a little bit on the insane length of some of the clips, but searching, and general performance is back on par!
    So your saying to yourself "Ok *********, sounds like you figured it out, what's the problem." Well to you I say, "Not so fast!" Remember, that was just a quick test using the media I had imported into the massive 10,000+ clip Event. To do this project proper, I am having to import Multicam sync'd XMLs from Plural Eyes. And this is where it all starts to fall apart. A little foreshadowing for your eager eyes. 10,000+ files all shot with multiple 5D's over the course of years. What does that mean? many, many duplicate file names!
    FCPX as well all know irritatingly imports XML's as new Events, not into existing ones. This obviously takes a lot of burden off media management because with a new Event comes a new database referencing its own version of the raw media. All well and good, and I'm betting its starting to click for some if you advanced users where I'm finally going with this. So I have 50 or so XMLs to bring in, all done no problem. Now I want to replicate that singular Event like I did with the Compound Clip test and have it all in one place to be my master as extensive logging begins for easy searching once editing begins. Highlight the Events, click Merge Events. NOPE. I get a new "Kill Yourself Now" error (a term I coined for Out of Memory and General Error messages in FCP Legacy meaning there ain't much you can do about it): "Two or more files have the same name. Change the names and try again, because I don't know what the **** to do with them." Ok I made up that last part but that's basically what it's saying. Just take the variable out of the equation, this happens with every which way you could try to get the clips together. Merge Events, dragging events on top of each other, dragging just the Multicam clip alone, nothing gets passed that message. What's worse is that while Batch Renaming seems like a solution, the renames do not populate inside the created clips and there is no way to Batch Rename those. Renaming everything at the finder level isn't so great because then I'd have to resync and theres an offline/online thing going here where the film has to be reconformed eventually.
    Basically, I've found that FCPX handles media management in completely different ways depending on whether you are importing into one Event yourself or doing essentially what is a new import with FCPX moving or merging Events. If you bring in all the media to one Event, on a macro level FCPX goes through file by file making aliases referencing the master file. If it hits a duplicate, it makes a parenthesis counter, and keeps going. And with the genius of FCPX metadata, that file name doesn't even matter, you can change it at the Finder level and FCPX will keep the link intact. BUT for some reason if you try to do this outside the realm of a single Event and combine files after the fact a different process takes over in creating this database system and can't handle the duplicates. I can't totally figure the reason other than it probably is scared to change the originally referenced alias to something else (which it shouldn't be scared of since Merge Events deletes the original anyway).
    This is where it gets INSANE and where I lose all understanding of what is going on, and believe me it was a delicate understanding to begin with. It comes in to play with the work around I figured out. I make the master Event with the 10,000+ clips. Then I import all the XMLs as dedicated Events. Now, I then drag the Multicam clips into the master Event, it WORKS! just takes it, no "Kill Yourself Now" error. Stranger still, now with the switched referenced Event, it even takes into account which aliased duplicate file name it's referencing in the Original Media folder. Somehow, it's taking into account the original file path and saying "Ok, I see 5 instances of MVI_5834.mov. Based on the original file path or maybe creation date or god knows what, it must be MVI_5834 (fcp3).mov." It connects perfectly. I can even remove the old XML imported Event with no problem. Crazier yet, I can now move those again to the dedicated Event I wanted originally that only contains those Multicam or Compound Clips.
    So instead of going straight from A to C, going from A to B to C works even though that actually seems way more complicated. Why can't FCPX handle Merge Events and dragging clips the same way it handles media imported into a single Event. And weirder still, why can't FCPX handle the (fcp1,2,3...) appending in the same scenario. But if the appended links are already there, No Problem. And for the love of god, it'd be nice to important XML's into existing Events and make the correct referencing happen right from the get go, which is really the source of all the above headache. I'd have no problem helping FCPX with a little manual pointing in the right direction just like any other NLE needs.
    Ok, having said all of that crap above, my question is, have I missed something completely simple I should have done instead? Now that I have everything in place how I originally envisioned, I think I will still play around a little bit more to make sure FCPX is really going to be able to handle this project. I'm at a stage right now where going another direction is still an option, although the dare devil in me wants to make this work. Media management aside, once you start editing on a FCPX timeline, its hard to go back to anything else. Apple is going to have to figure out some way not to access to everything at all times to work fluidly or big projects like this are never going to be practical in FCPX.
    Sorry for the long confusing post....

    I'm having the exact same problem, but I know nothing of ruby scripts. I've exhausted my resources with tech support, and after literally hours of work with them it seems I now am faced with either re-rating each individual song, or pointing iTunes to each song that it can't locate. Is yours a solution that could help me? How can I find out more about Ruby Scripts? Thanks for your help, hellolylo (or anyone else who might also be able to help...)
    Kenn

  • Syncing of Apps and a Work Around I Thought Of

    (this is an excerpt from a previous thread which was not answered - if you could kindly help me out with this and offer your expertise it would be greatly appreciated. Thanks!!)
    Hi All,
    I know this will be quite a change of tone from what you've been getting so far here in this thread, but I want to start of by saying thank you, for all the help and guidance you have been and are giving us. I greatly appreciate it.
    I have a question on apps folder structure upon restoring from backup. I will share with you the chronology of events, what I understand, what I hope to achieve and what ways I think this can be achieved. By sharing with you my whole thought process, I hope to get your critique and correction if at any part I have misconstrued the logic. Thanks in advance again.
    I have 2 iPhone and 2 iPads. When I bought my first iPad (brand new) I plugged it into iTunes and did a restore from my iPhone 4G backup. I believe I selected "Sync Apps" (though I can't confirm now cause I formatted my computer already) because all my iPhone apps were synced to my iPad - which is great. Q1 --> Because I restored from my iPhone 4G backup which presumably had "Sync Apps" checked, I believe my first iPad's iTunes syncing options also had "Sync Apps" checked as well - reason is that all the "Music", "Movies" and "Photos" options were also transferred over. Am I correct? Thanks
    So for the rest of the post, I will assume the iTunes setting for my 1st iPad was set to "Sync Apps" (until you correct me otherwise).
    My computer was running a bit crappy --> Windows, I know haha, so I formatted it. I did not save my backup file to an external harddrive and then put it back into the %appdata% iTunes Mobile Sync folder. Therefore after formatting, I plugged my iPad into the new computer and did a backup. Because (if I remember correctly, - (Q2) please correct me if I am wrong) it sensed my iPad as connect to a previous iTunes it asked me if I wanted to disconnect from the previous iTunes and sync to this one cause I do know that we can only sync to one iTunes at a time. I had to re-configure all my "Music, "Movies" and "Photo" settings again as this was a new iTunes configuration - which I do understand. Q3 - if I have a new iTunes because I formatted my computer, but I ported over the old backup file and restored my iPad from there, would it still be considered a new iTunes link and thus I have to configure everything again? I don't think so cause the backup contains all the settings; what I think will happen is that I will just be asked if I want to disconnect from the old iTunes and connect to the new one, and all my settings will be restored from the backup.
    So I synced my "Music", "Movies", "Photos" and also "Info" and "Podcasts" (I don't use "TV Shows") and got it all set up. Only thing I didn't tick was the apps - perhaps cause I didn't take the time to understand it previously owing to the fact that I didn't need to then ha, but now I do!! So after everything was synced, I did a backup. After reading your thread, and the link you gave, I understood that I have to transfer purchases from my iPad because my iTunes had no apps - as it is a "new iTunes". So I transferred my purchases.
    Next I joined my 2nd iPad (second hand iPad) and did a "Restore" (If you are experiencing problems with you iPad, you can restore its original settings by clicking Restore.) to wipe out apps etc that the previous owner had. Q4 - what is the difference betwixt the "Restore" in iTunes below "Check for Update" and the iPad's "Settings" --> "General" --> "Reset" --> "Erase All Content and Settings"? I believe (with some experiments ha) the "Restore" in the iTunes will give me a "brand new" iPad but I don't know what is the difference betwixt that and "Erase All Content and Settings".
    I then restored from the backup of my 1st iPad. But remember just now I mentioned that I did not tick the "Sync Apps" in my 1st iPad's settings? So after the restore was done, I had all my "Music", "Movies" and "Photos" + "Podcasts", "Info", everything but my "Apps" --> because I didn't tick "Sync Apps" in my backup. So my 2nd iPad had everything but "Apps".
    Now I need to rectify that and create a mirror of my 1st iPad. I don't jailbreak my iOS devices and all my Apps are bona fide purchases with my hard earned money . Here is the solution I thought of and the single problem I face.
    Solution: On my 2nd iPad, click Sync Apps, select all the apps I want in my iPad, and then click Apply. Then I restore the backup of my 1st iPad. That restores all my app data and very importantly, my folder structure (cause when we have a lot of apps and we organise it all into folders, re-putting them back into folders can be quite time consuming; quite the antithesis of computing in the first place).
    This truly give me a mirror image of my 1st iPad (please kindly correct me if I am wrong). The only problem is that, the Sync Apps is still not ticked. Q5 - Is there any benefits of my ticking "Sync Apps" vis a vis doing it this work around method? (Update: I thought of something - "Sync Apps" would allow all the apps on my iPad to be automatically synced to my iTunes but for my work around, I need to think of all the apps I want on my iPad and tick them. If it is for example 50 out of 50 apps, it's simple. But if it's 50 apps out of 150 apps in my iTunes then it would be a big headache. Any other benefits / costs?) My "File Sharing" is still working ok - in the sense I can still transfer data to my apps without having it synced (thankfully it is not sync dependent - but please once again correct me if I am wrong).
    The reason why I do this work around method is because if I were to click "Sync Apps", it would get all my apps into my iPad but it would destroy all my folder structures. Q6 - however if I do this "Sync Apps", when the apps are transferred to my iPad I would have all the app data on my iPad already right? Because I postulate it work on a n-tier abstraction separating data from the app. I think this is true because previously I restored from backup and had some apps missing, but when I downloaded the app all the data was "magically" there.
    Q7 - is there any way to maintain apps folder structures when I am syncing to a new iTunes instead of the work around I have thought of?
    Q8 - and last question haha. My iPad has 10 3rd party apps now for example. If I backup now, it would backup the app data of all 10 apps (3rd party apps - notation left out for simplicity sake moving forward). However if I deleted 2 apps from these 10 apps, then if I backup the 8 apps, would it mean that the backup no longer stores the 2 deleted apps's app data? I think that would be the case but I would just like to confirm.
    Thank you for reading my very long post and I really appreciate all your help, Allan and all others. Looking forward to your advice, guidance and response!! Thank you once again!!!
    P.S. does iTunes lag quite a bit in Windows (if you are a Windows user)? For me it's not the quickest programme around; can get quite laggy sometimes, on my newly formatted and empty 64 bit 4GB Dual Core 2.4 GHz HP TX2 and Acer computer as well

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • Audio/Animation Bug, with a work-around

    This is one of those cases where TechSupport believes a
    work-around is fine to something I would consider a bug. Took me a
    while to find the solution so I'd like to share with everyone my
    problem/solution.
    Background: I have a presentation with recorded audio on a
    slide that uses custom animation; in this case I've drawn circles
    and squares against an image to highlight a point. The animation is
    "on click" specific per Breeze. One of those animations creaps in
    slowly.
    Issue: When that same presentation from the Content Library
    is shared in a Meeting, in my opinion all sound should be
    "disconnected" unless using the presentation playbar. However, I
    have found that during the building of the screen (using Next/Right
    Arrow), the "sound behind the animation" comes through. Not
    terribly anoying for fast entrances, etc., but when something
    creaps in, you can have a lengthy audio playback during that time.
    IMHO, this shouldn't happen.
    Solution: (two; 1 TechSupport, 1 mine) TechSupport says to
    save the presentation as a different file name, close and delete
    the .ppc file, reload into PowerPoint, accept the load without
    audio and republish. Then in the meeting room simply select that
    renamed file. Major drawback on this point: I've got a file upload
    limit on my account. I've just doubled the space required per file.
    My solution was to use the Pod Options on the share, select
    Show Presentation Playbar and mute the audio. Simple.
    However, I still think the audio snippets behind the
    animations are a bug.
    Thanks for letting me get the word out about audio behind
    animations.
    JR

    First Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some original photos from other library that are not rotated properly and check to see if the same problem persists. If it does persist do the following:  make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    If still not working correctly continue with the following:  apply the fixes below in order as needed:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • The Ipod cannot sync - disk cannot be read from or written to - Work around

    I have been having the same problem and have talked to Apple support several times. It seems like the major problem is with Windows xp media center edition. They got back to me today with not a solution, but a work around. It seems to be working so far. If you are running media center edition open device manager and expand universal serial bus controlers by clicking on the + sign (with the itouch not connected) If you see "standard enhanced pci to usb host controller...right click on it and choose disable. Close device manager and reconnect your itouch to the computer. The sync will be much slower but it seems to be working for now. I spoke to a level 2 product specialist, and he was very helpful in giving me this "work around". He promises to get back to me with a fix asap. In that event I'll post the fix here.
    Thanks,

    Yes yes this worked for me too! ***?
    I have Windows Media Center as well. I have tried EVERYTHING and I mean EVERYTHING including reinstalling my OS. I have spent all of yesterday and all of today not to mention much time over the last few months trying to get it to work better. Not since getting my iPod have I ever been able to get everything to sync. Restores simply resulted in movies that previously worked not working and ones that didn't start to work. Oh and this is my third individual one. Seriously this works, but is a pain because now a single movie takes about 20 minutes or so to copy. Lame. Well I am going to call Apple tech support and mention this to them and also put something into feedback. It is ******** that people have to jump through so many hoops to get this to work. Apple is lucky this isn't my sister or my girlfriend. Anybody who doesn't have much experience with computers would be lost.
    Thanks though! Same here, you saved my life as I was seriously ready to throw this out the window, as much as I love it! :O
    Apple, please do something about this.

  • Is there a work around to the fact that MAC OS no longer supports software using PowerPC?

    I can no longer use two interactive Pearson Pelican Plus interactive CD Roms in school because I get an error message saying PowerPC is no longer supported by Mac. My OS is 10.9.5.
    Is there a work around?
    Ella

    ellalps wrote:
    I can no longer use two interactive Pearson Pelican Plus interactive CD Roms in school because I get an error message saying PowerPC is no longer supported by Mac. My OS is 10.9.5.
    Is there a work around?
    Ella
    Ella:
    It is unclear from your post if your inability to use Pearson CD-ROMs occurred after you purchased a new Mac, or simply upgraded your current one to Mavericks.
    If you simply upgraded to Mavericks, your easiest solution and best operating environment would be to use Disk Utility to partition your hard drive and reinstall Snow Leopard (with the optional Rosetta) into that partition.  You could then use the "dual-boot" process (System Preferences:Startup Disk) to determine with environment is operating on your Mac: Snow Leopard when you want to run the CD-ROM or Mavericks where you need more modern capabilities.
    Note that if you must have the concurrent ability to run the CD-ROM and  Mavericks, then, the previous information posted by others in this thread is your only solution and there is no point in your taking the extra steps to partition your hard drive and install Snow Leopard.
    The previous information provided to you is largely accurate except for one point that is irrelevant to your concerns and will only generate needless irrelevant repetitious responses if I point out what it is.
    The great tragedy in today's USA society is the government's failure to properly fund education combined with the high amount and cost of student loans and their inability to be discharged in bankruptcy.
    The combination of all of these factors leads educational publisher's such as Pearson no financial incentive to upgrade many of their essential products for the education market, including rewriting their CD-ROMs to work directly on Intel Macs without the addition of Rosetta, which is not longer supplied by OS X after Snow Leopard.
    Having seen this problem posted on this forum quite regularly over the last few years, I purchased a demo CD-ROM from Pearson on Amazon and I am able to report that indeed they will run on a Mavericks (or Mt. Lion or Lion) Mac that has Snow Leopard Server ("SLS") installed into a virtualization program (in my case Parallels), as shown here:
                                  [click on image to enlarge]
    Previous posts have described the telephone process and part number to obtain SLS from Apple for the now 95% discounted price of $20!  Parallels offers a 14-day free trial download of Parallels (do not activate it until you are in possession of SLS):
    http://www.parallels.com/products/desktop/download/
    If you need it, more detailed information on this process is available here:
    http://forums.macrumors.com/showthread.php?t=1365439
    Good Luck with your education!

Maybe you are looking for

  • Printers showing up after Printer Service has been stop or printers deleted

    I started setting up the Print service on one of our Mac OS X.5 Servers. Very simple to do. At the printer configure and disable all sharing options mDNS, AppleTalk or EtherTalk... On the server add the printer via IP address and select the correct P

  • PBA7 runtime error LOAD_PROGRAM_NOT_FOUND

    i am trying transfer applicant to employee by using PBA7 but when transfer infotype 0021 family there's error load program not found and with dump : ABAP runtime errors    LOAD_PROGRAM_NOT_FOUND        Occurred on     21.04.2014 at 11:52:27 Program "

  • BAM Sensor in BPEL

    Hi, I'm new to BAM and am trying to use a BAM sensor in my BPEL process to populate the BAM data objects. I've created a BAM sensor variable and corresponding sensor action. The BPEL process executes as expected but the sensor does not seem to reflec

  • Registration of Crystal Reports

    Hello to All: Newbie here, How does one go about registering copies of Crystal Reports. Where on the SAP site is the link. Thanks in advance for any and all assistance.

  • ITunes bought and paid for movies are not on my Mac

    I set 2 movies to download before I retired for the night. I logged in and received the "are you sure" msg.  The movies were actively downloading. These 2 movies are not in "My Movies". Who do dI contact?