Work Bencg request Import problem in STMS

Dear Team,
I would like to import the transport from Dev to PRD in STMS.
While importing i am getting the following error log.
Generation of programs and screens
Transport request   : SD1K900195
System              : SP1
tp path             : tp
Version and release: 372.04.10 700
Generation of programs and screens for transport request SD1K900195
Only generates programs with LOAD versions
Start on 20.05.08 at 11:37:19
Ended on 20.05.08 at 11:37:20                                           No. of programs /Min/Avg/Max (sec): 3 0 0 1                         No. of screens    /Min/Avg/Max (sec): 2   0 0 0
Generation of programs and screens
End date and time : 20080520113720
Ended with return code: => 8 <==
Regadrs
Senthil

Hi,
do you have expand icons to get more information (plus symbol)?
I suppose you didn't watch the protocol at file system level.
regards
Walter Habich

Similar Messages

RFC error when trying to add transport request in queue in STMS..

Hi,
When I try to add a Transport request in queue in STMS transaction. I get RFC error saying some problem with tp program.
But when I go and check the RFC connection through STMS in system overview -> Communication -> RFC setting, it says RFC connection Ok.
What may be the issue ? I really need some light on this..
Regards,
Rajesh.

Hi Rajesh,
At times when u try to add the TR to a queue there would be 2 reasons.
1. If u have imported a TR into a system say QTY and it needs to be re imported, then we delete it fromthe STMS queue and add it again to re import it.
2. If u have some transport from external sap system to be imported here we place the data and Co files in the trans directory and then add the TR to this queue.
A TP failure happens if the data and co files does not exist in the TP directory or else, the TR target system is incorrectly mentioned.
Hope it helps.
Br,
Sri
Award points for helpful answers

LR3.2 import problem on computer with Windows OS

LR3.2 import problem on Windows OS
This is a continuation of a question that I posed on August 22, 2010 in the discussion string "Cannot import CR2". I have not been able to resolve the issue of importing an image into an existing folder location. I had not been able to work on this issue for a number of weeks due to other circumstances, until today.   Note that the following people had attempted to provide answers and suggestions already: ssprengel, JayS In CT.
I use a laptop with a Windows operating system and a Macintosh desktop with Snow Leopard. I run Lightroom on both of them. The Windows laptop has Windows Vista Home service pack 2, version 6.0 [6002]. Around August 12th I upgraded from Lightroom 2 [481478], to Lightroom 3 on the laptop. I left the LR2 on the laptop as well as LR3. On September 12th I upgraded the laptop to LR3.2. No other changes have been to the laptop or its software applications that I know of.
My current attempts at resolving the issue reveal that when I created a new catalog "Test Catalog" in LR3 and saved that catalog to my desktop new folder labeled "Test Catalog" that I can import an image into LR3.2 to a new folder on the laptop's desktop. I then deleted the images via LR3.2 Folders Remove function and tried to import the images into an existing folder as presented in the LR3.2 Import dialog, but get the error message "The following files were not imported because they could not be read.".   When I import images into a new folder placed on the desktop, I can use all functions in LR3 e.g. Develop module. I cannot import images into existing folders on the laptop's hard drive - I have tried importing into the entire existing folders in the following hierarchy: c:\users\Michael\My Documents\My Pictures\2010 but always get the same error message.
LR3.2 does correctly backups upon exiting each time I quit the program, so I know that there isn't any issue of writing to that backup folder which is contained in an upper folder that contains the lightroom catalogs. I have even created a new Word file, saved it into the folder with Lightroom catalogs, opened it up, modified it, saved it, and saw that it works OK, so that tells me there is no problem with a Read-Only folder attribute.
I cannot recall if upon the upgrade from LR2.6 to LR3 that I chose to upgrade the catalog to LR3 version. Would that matter, if yes, what do I verify, how do I manual upgrade the catalog.
History of actions between August 10th that I have taken follows between the [[[[ and ]]]]:
[[[[Preference settings for Default Catalog are set to start with a specific catalog that I call "Lightroom master catalog", it is not set to the "Load most recent catalog".
All of the following were using my laptop: Previously I had no problem with LR2 for any functions. I just purchased an Epson 7000 media storage device, and in early August and practiced importing images into LR2, and those images were pulled in OK. Next, I upgraded to LR3. I discovered that the Epson's images had been placed into a wrong folder when I opened LR3. I used the remapping function in LR3 to move the images into the correct folder. Next, I used a SanDisk card reader to import images into LR3 into an existing folder of images, but the following error message appeared "the following files were not imported because they could not be read" (Import Results said 'some import operations were not performed'). I tried importing a single image, and multiple images, but had the same error. I tried switching the card reader to each of 4 different USB port on the laptop, with the same error occurring on each USB port used.
In order to try to isolate the problem. I took the SanDisk card reader with the memory card and successfully imported the images into LR3 on my Macintosh desktop computer; so to me the problem is not the card reader or the memory card. I also used the SanDisk recovery disk while using my laptop to look at the files on the memory card and I could see all the images correctly while in the recovery program, but I have not copied the images to the laptop's hard disk, and have not tried an import into the laptop's LR3. I did not import images directly from my camera to the laptop LR3 since I did not think it would help with the troubleshooting.
I then ran the Repair from the Adobe LR3 CD upgrade disk, on my laptop. Then I tried doing the import using the SanDisk reader and memory card, but the same problem occurred and same error message, that the files could not be imported (I was trying to import into a folder of existing images). I then used the Laptop's Control Panel function to remove LR3 application. Then I did a fresh upgrade of LR3 on my laptop, but the same error message and I am unable to do any import of the memory card from the card reader. I then tried to do an image import from the Epson 7000 into the laptop, and the same error message and I am unable to do any import into a folder with existing images.   I then tried doing an image import into LR2 on the laptop, and got the same problem to occur when trying to import into an existing folder of images. I have a couple of Canon EOS SLR digital cameras, and the issue occurs for any of the file types of the cameras.
Went into LR3 Preferences, General Tab, I now checked the previously unchecked box for Import Options - "Show import dialog when a memory card is detected".
Connected the Canon XTi directly with a cable to the laptop computer. Note that Canon's information said that Picture Transfer Protocol is automatically used when the XTi is directly connected to a computer, so I did not need to change anything in the camera's menu for communications choices (there is no communication menu in fact). I selected one image and copied it to the laptop desktop. Tried to import it into LR3 into a folder of existing images but got the error message "Could not copy a file to the requested location." While in LR3, I changed the location of where the file would be copied into - any of my existing folders of images; tried 5 different folders, but kept getting the same error message.
With the card reader connected via USB port on the laptop, I copied one image file to the desktop, and then tried importing into LR3 into a folder of existing images. Got the error message "Could not copy a file to the requested location."]]]]

I am not clear if by 'import' you are trying to copy or move the files from a location to another or if you are adding the files to a catalog. My comments may not, therefore, be too helpful.
Firstly, with both LR2 and LR3 installed you will have both catalogs present, but if you try to open the LR2 catalog with LR3 you will be prompted to update the catalog. You will thus know which catalog you are working on.
Secondly, if you are reading direct from the camera, you should connect using the 'PC connection' mode.
Thirdly, there is an issue with reading .CR2 files directly from the early Canon DSLRs (in Europe named 300D, 350D, 400D). While they are visible with the Canon software, they can not be seen with Windows explorer nor can they be accessed with Lightroom.
I suggest that you take the CF card out of the camera and copy the files using Windows Explorer in to the destination folder. You are then sure that the files are on the PC.
If you have the right Codec installed, you can view them with Windows photo gallery; if you don't, you can use one of the Canon software packages to view the files. You are then sure that the files are not corrupted.
Then import the files to your LR catalog using the normal import routine selecting 'add without moving'. I have tried this routine successfully using my 350D using both LR1.x and LR3.x. If that doesn't work - I'm lost.
Frank

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Map including spliting operation dosen't work in MDM Import Server

Hi All,
I met a problem with MDM Import Server when using a map file with spliting operation in it, although I can use it in MDM import manager to load data successfully. The error in log file is like this:
Record Matching...
Importing Lookup...
One or more attribute values are invalid.
One or more attribute values are invalid.
One or more attribute values are invalid.
One or more attribute values are invalid.
Import Failed!
The spliting in my map is: I split field "Category" into category1 and category2 with space " ". e.g. value "Trousers M" is splitted into "Trousers" and "M" . Then I map category1 to category and category2 to size.
I tried to delete this spliting and just map "Category" to "Category" then it works well for Import Server.
Is it the bug of MDM import server? can anyone give me a explaination?
Thanks! Bin

Under Configuration Options of the Import Manager,
check the values for
<b>Default Batch Handling</b>
AutoMap Unmapped Values = Yes
Unmapped value Handling = Add/Ignore/Fail.
Set the values according to your needs.
Make sure that the data source is updatable as well.

Annoyed with JVC/Final Cut Pro import problem; will they ever fix this?

Annoyed with Final Cut Pro JVC import problem; will they ever fix this?
I've shot footage on JVC GY-HD111E in the UK in 720p/25p PAL mode.
I'm trying to import lots of short clips (average 10 seconds) into Final Cut Pro (latest version with 720p/25p support) with a new Mac Pro maxed out with ram and 3 extra internal HDs.
Problem is, on a scene-break i.e. pause/stop, Final Cut detects this and creates a new clip, but it takes about 5 seconds to 'searching for media" before it starts the new clip. Because some clips are only very short, this 5 second delay sometimes means I only get the final few frames of a clip, rather than the entire 5 seconds or so of it.
JVC UK are blaming Apple and are saying it is up to them to fix it as Premiere and Edius does not have this problem.
However, Symbiosis in the UK (who do HD-Connect box) say that the JVC ProHD cameras do not wrap the shots up properly at the end, they are kind of left open and this creates problems on scene-breaks.
I've tried turning off the "create new clip on timecode break" etc, but it does not make any difference, when I do this it simply quits capturing on a scene break. Besides I have about 300 cutaways like this and I don't want to spend the rest of the year breaking them up on the timeline as this would be a futile and long workflow.
I'm importing and working on a native HDV 720p/25p timeline and this is the way I want to work. I've already imported and edited 4 hours of footage, but these 4 hours were easy as all 4 tapes had no start/stop points, they were recorded continuously from beginning to end of tape for 64 minutes each time so importing was no problem; 1 clip per tape.
But now I've come to my 5 tapes containing hundreds of cutaways I'm kind of screwed and need some advise on how I can import them natively in HDV without losing this 5 seconds off the beginning of each clip whilst FCP searches for the media each time.
I've been told this issue is definately with FCP, any ideas how I can get around this?

I haven't heard of this JVC/FCP problem, so I can't comment on it. However, whoever shot the cutaways didn't do you, the editor, any favors.
I've been doing video since 1984, and I've got to say, anyone who shoots a scene that is only 5 or 6 seconds long on tape is making a huge mistake, and it's been that way since the beginning of computerized editing in the late 70s.
Shoot at least 5 seconds of pre-roll before the shot begins, then roll tape for at least 5 seconds after you've got the shot. That's the protocol I've followed for 22 years now. Tape is cheap, edit suite time isn't.
But laying down only 5 to 6 seconds for a scene is wrong, IMO.

Import Running in STMS

Dear All,
i transported a request from QAS to PRD and it was showing (Import Running ,showing Truck) for 2 hours .So, I deleted it and made new transport request from consultant When i import it then it also showed Import Running. After it i transported more request but all transport requests are showing Import Running from 2 hours in STMS.
what should i do for this issue?
regards,
majamil

Hi Ashok,
thanks for reply,
fyi, the transport request successfully imported from DEV100 to QAS400 but not on PRD600.
when i execute
Goto sm37->jobname RDDIMPDP and user DDIC with selection criteria status released.
result is: No job matches the selection criteria
schedule the job by running the program RDDNEWPP with t-code se38 in client 000.
when i click on Normal table for scheduling then i get:
information:
Error scheduling background job
RDDIMPDP_CLIENT_ 600 in 600
I have already deleted those transport requests which were showing Import Running in STMS from 2 hour.
after this when i transported the new requests then i faced that truck mean Import Running from 1 hour.
regards,
majamil

Imovie Mac importing problem or Camcorder problem?

I run a small business for kids parties. I video the kids dancing along to a track they have recorded (played on a cd player). Then i import the video, turn off the camcorder sound and import the finished mixed track of their singing and sync the picture and audio together. This has been working perfectly for over a year. But unfortunately in the last month when i try to sync up the audio track with the video, it starts off synced up perfectly, but gradually as the video goes on the video and audio become out of sync and by the end the video is either too fast or too slow. this is a huge problem! I thought it may the tapes in the video camera so i changed them and it's still doing it. Is this a video camera problem or computer importing problem. Can anyone help as it's ruining the kids DVDs!

I am surprised it has ever worked. That can normally only be done with synched professional equipment. Maybe they changed the CD player at the performance and the old one happened to play at the same rate as your Mac when it imports? (There is a slight difference between the playback speed between different players)
Or perhaps your video camera has become slightly worn, so it pulls the tape slower?
There are endless possibilities for problems with your setup.
I think you should take a look at the "add scaled" tip at the bottom here:
http://danslagle.dvmix.com/mac/iMovie/audio/1001.shtml
(Instead of adding the extracted audio from iMovie, you should add the CD audio.)

Aperture 3.2.1 Import problems.

Aperture 3.2.1 Import problems. I can not import. Complete system hang when I try. Have to force reboot. I made a new user and everything seems to work fine under that user. I must have something conflicting in my admin user but I have had no luck finding it. I have tried rebuilding the library (all three options) but to no avail. Aperture will run fine as long as I do not try to import. This is very frustrating, any help would be greatly appreciated.
27" imac 3.06 intel core 2 duo 12 GB Ram

Hello Tim,
If a problem only occurs when working from one account, then very often faulty user preferences or presets are the cause. Try to remove your user preference file, and if that should not suffice, move your presets to the desktop, as described in the Aperture 3: Trouble Shooting Basics:
(Caution: I see, you are running Lion: Because of Lion's non-preemptive Process Management you can never be sure if an application really has quit, even if it looks in the Dock as if the Application has finished. So it is very important to log off, before you launch Aperture again, after you changed something in the libraries like described below.)
Delete the user preferences
You can resolve many issues by restoring Aperture back to its original settings. This will not impact your image files or your library. To reset your Aperture user preference settings to their original state, do the following:
Quit Aperture.
In the Finder choose Go to folder from the Go menu.
Type~/Library/Preferences in the "Go to the folder" field. Press the Go button.
Remove the "com.apple.Aperture.plist" file from the Preferences folder. (and log off and log in again!)
Move the user created presets, keyword lists, and so on...
Quit Aperture.
In the Finder choose Go to folder from the Go menu.
Type~/Library/Application Support/Aperture in the "Go to the folder" field. Press the Go button.
Move the contents of this folder to your Desktop (and log off and log in again!)
Start Aperture and see if the issue is resolved. Note: Permanently removing these files will delete presets, metadata sets, keyword sets, and so on. If moving these files to the Desktop does not resolve the issue, move them back to their original location to restore the presets, adjustment chain presets, and metadata sets. In no case will removing these files affect metadata, keywords, or adjustments already applied to images.
If none of this should help, try to boot into safe mode (hold down shift after the start up chime), to see if you have conflicting plugins or video drivers etc. installed in your admin library.
HTH
Léonie

Lightroom just stops working, usually during import.

Lightroom stops working, usually during import. Here is the error message that appears:
Adobe Media Core CS6 has stopped working
Problem signature:
Problem Event Name:APPCRASH
Application Name:Adobe QT32 Server.exe
Application Version:6.0.1.0
Application Timestamp:4f8e51aa
Fault Module Name:QuickTime.qts_unloaded
Fault Module Version:0.0.0.0
Fault Module Timestamp:5180f322
Exception Code:c0000005
Exception Offset:534fcc49
OS Version:6.1.7601.2.1.0.768.3
Locale ID:1033
Additional Information 1:0a9e
Additional Information 2:0a9e372d3b4ad19135b953a78882e789
Additional Information 3:0a9e
Additional Information 4:0a9e372d3b4ad19135b953a78882e789
Please respond by email ([email protected]): Thanks in advance for help.

yes shirley i did, it turned out that one of my photos was a snapshot of what was on my iphone at the time and it had been named xxxxx.png, i think the fact it was .png was the reason, anyway i deleted it from phone and computer and i,ve had no problem since.

AE CS4 - Import problem (JVC Everio clips in 16:9)

Hi everyone,
I hope someone can help me with this because it is driving me crazy I got a JVC Everio "GZ-MG750" camcorder some months ago and I must say I first had problems with "Export" (JVC to PC) because when you have recorded the clips in 16:9, if you don't use what is called sdcopy.exe, clips in your PC become 4:3.This [sdcopy] allows you to keep the original aspect ratio.
Apart from that... the problem is, I am starting to learn After Effects CS4 and I have "Import" problems and I have gotten stuck on this. My clips are supposed to be 16:9, but when I import them, they become 4:3, and if I type that my composition must be 16:9, etc. it works but not with the clips. The clips are still in 4:3 and I can't understand it, because after all, they shouldn't be 4:3 anymore since I made the change of aspect ratio with sdcopy. It does work in Premiere CS4 (the video imported is 16:9) but not with After Effects CS4.
What's happening here? Any ideas?
Thanks in advance,
Marta

At the bottom of the Comp Window you'll find the pixel aspect ratio compensation toggle switch. Toggled on, everything's in the proper screen aspect ratio, but the edges look stair-steppy, expecially text & graphics. Toggled off, everything is smooth but not in the proper screen aspect ratio.
When rendered, everything will be in the same screen and pixel aspect ratios as your comp, AND it will be nice & smooth.

AVI with ac3 import problem

hi
sorry for my bad english
0.avi opens in adobe premiere pro cs6 without any problem.
mediainfo result for 0.avi:
General
Complete name                            : C:\Users\User\Desktop\****\0.avi
Format                                   : AVI
Format/Info                              : Audio Video Interleave
File size                                : 232 MiB
Duration                                 : 18mn 52s
Overall bit rate                         : 1 722 Kbps
Video
ID                                       : 0
Format                                   : MPEG-4 Visual
Format profile                           : Advanced Simple@L5
Format settings, BVOP                    : 1
Format settings, QPel                    : No
Format settings, GMC                     : No warppoints
Format settings, Matrix                  : Custom
Codec ID                                 : XVID
Codec ID/Hint                            : XviD
Duration                                 : 18mn 52s
Bit rate                                 : 1 261 Kbps
Width                                    : 720 pixels
Height                                   : 304 pixels
Display aspect ratio                     : 2.35:1
Frame rate                               : 23.976 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 0.240
Stream size                              : 170 MiB (73%)
Writing library                          : XviD 65
Audio
ID                                       : 1
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : 2000
Duration                                 : 18mn 52s
Bit rate mode                            : Constant
Bit rate                                 : 448 Kbps
Channel(s)                               : 6 channels
Channel positions                        : Front: L C R, Side: L R, LFE
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Compression mode                         : Lossy
Stream size                              : 60.5 MiB (26%)
Alignment                                : Aligned on interleaves
Interleave, duration                     : 32 ms (0.77 video frame
but when i import 1.avi it gives error:
the file contains an unsupported audio format.
mediainfo result for 1.avi:
General
Complete name                            : C:\Users\User\Desktop\****\1.avi
Format                                   : AVI
Format/Info                              : Audio Video Interleave
File size                                : 67.2 MiB
Duration                                 : 4mn 27s
Overall bit rate                         : 2 106 Kbps
Video
ID                                       : 0
Format                                   : MPEG-4 Visual
Format profile                           : Advanced Simple@L5
Format settings, BVOP                    : 1
Format settings, QPel                    : No
Format settings, GMC                     : No warppoints
Format settings, Matrix                  : Custom
Codec ID                                 : XVID
Codec ID/Hint                            : XviD
Duration                                 : 4mn 27s
Bit rate                                 : 1 500 Kbps
Width                                    : 704 pixels
Height                                   : 384 pixels
Display aspect ratio                     : 1.85:1
Frame rate                               : 23.976 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 0.231
Stream size                              : 47.9 MiB (71%)
Writing library                          : XviD 64
Audio #1
ID                                       : 1
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : 2000
Duration                                 : 4mn 27s
Bit rate mode                            : Constant
Bit rate                                 : 384 Kbps
Channel(s)                               : 6 channels
Channel positions                        : Front: L C R, Side: L R, LFE
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Compression mode                         : Lossy
Delay relative to video                  : 32ms
Stream size                              : 12.3 MiB (18%)
Alignment                                : Split accross interleaves
Interleave, duration                     : 32 ms (0.77 video frame)
Audio #2
ID                                       : 2
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : 2000
Duration                                 : 4mn 27s
Bit rate mode                            : Constant
Bit rate                                 : 192 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Compression mode                         : Lossy
Stream size                              : 6.13 MiB (9%)
Alignment                                : Aligned on interleaves
Interleave, duration                     : 32 ms (0.77 video frame)
and when i extract video and ac3 file from 1.avi with avidemux then i can import them separately. but after importing audio and video in timeline audio length not same with video.
the length difference in the image:

Hi,
I don't have GraphicConverter and since it is shareware and money is tight right now, I tried to find a freeware image converter on the internet for the Mac. I didn't. I remembered that I have Photoshop Essentials. It came with my Canon scanner. I installed it and looked to see if it had a converter of some type in it. I saw that you can import a file, work with it and then save it to what you want. I thought that I had already done that with the Nikon files. Anyway, I tested it. I imported one of the Nikon images into it and saved it as a jpeg- even though it appeared to be a jpeg already. Bingo! It worked. It imported into my video editing program. I selected two other files from the Nikon shots and did the same thing. I change the name of the picture and then save it as a jpeg in Photoshop Essentials 2. The two files imported into my video editing program. I then went to the two original Nikon files that I had imported into Photoshop Essentials 2 and changed the names of them- leaving the jpeg extension on to see if they would import, they did not. So, as you said, there must by some kind of Metadata with those files. Bringing them into Photoshop Essentials 2 and saving them as jpegs fixed it. Because of what happened, I just went through my approx. 4,000 pictures and selected about 1,400 again for a new family DVD. I created folder and exported 1,446 jpeg pictures into it. Then I opened by video editing program and imported the folder. All 1,446 pictures came in. I didn't try it with FCE and iMovie, since I the program I regularly use is Adobe Premiere. I may try it later, but I am pretty confident that if the pictures can be imported into Adobe Premiere, they can also be imported into FCE and iMovie(unless there is a number limit.)
All this has taken place over several days. I am glad that it is figured out.
Thank you for the help.

XML Premiere 5.5 to FCP7 Import problem

I am working with an outside editor who did some edits for my company in Premiere 5.5.
They're tryng to supply me with a FCP7 compatible XML file for import into FCP7.
Well I am able to convert the XML file in FCP7, but not all of the info is coming thropugh properly.
The edit is a simple one...
2 camera A/B talking head
1 Main Audio track whihc is done as 4 audio (2 stereo) tracks in Premiere.
The edit supplied to me comes through with the video being fine on 2 tracks.
However, the audio track does not even show up in my timeline. However it's there on his Premiere timeline.
Any idea what might be the problem?
I have supplied pics of both timelines for reference.
One is his Premiere timeline, the other is my FCP7 timeline after XML conversion.
Premiere timeline with 2 videos tracks and 4 audio tracks.
FCP7 timeline with 2 video tracks and only 2 audio tacks sowing up.
Where is the other audio track.

Jeff,
Thanks for your advice, the use of the UT Video Codec Suite has been exceedingly helpful in capturing video. It has made 1080i capture much simpler.
Unfortunately it has not solved my 720p import problems.
I have played around with several different configurations. If I record 720p at 29.97 frames, the whole video imports without difficulty, but the sound is messed up. But when I try to import 720p video at 59.94 frames, Premiere Pro will only import the first couple of minutes of the video if the video is longer than 7 minutes.
If you have any further advice, I would appreciate it.
Kerry

Fixing import problem in iMovie HD

I found a fix for the importing problem some people have been experiencing in iMovie HD. A google search turned up this webpage
http://www.versiontracker.com/dyn/moreinfo/vt3/10228
I tried this and it worked. Basically the problem on import is linked to a Core Audio problem that can be resolved by opening Garageband and playing a few notes with the desktop keyboard. I had to do this a few times and try and play my video footage in iMovie a few times, but it eventually worked and I was able to import with no problem.

Thanks for mentioning it.
There have been several mentions of this here in iMovie Discussions, but older messages 'drop off' the page, and so sometimes they're not visible any more.
Thanks for the timely reminder.

Import Problems: Video Pauses, then continues

I have used FCI for almost 2 years and never had any problems importing. Now, when I try to import, the footage randomly pauses on import, then a few seconds later picks back up again. As a result, the imported video has lots of still moments. All of the equipment has worked before.
The problem exists on both a MiniDV and D8 camera/tape.
I have tried importing both to Macintosh HD and to a LaCie HD.
I have tried pass-through conversion, to remove any digital tape errors.
I have used a GL2 as well.
This is driving me mad! Any ideas?

I have recently upgraded the OS to 10.4.10. I can't remember when 10.4.9 came out, but I don't think I imported on this machine with it.
How do I revert to 10.4.8?
Given all the variables I have tried (2 computers - one G4 & one Intel, 2 Firewire cables, 2 internal HDs and 1 external, 2 MiniDV cams and one Digital8 cam, digital and analog pass-through import, tapes from multiple projects) it seems that you may be right. The only thing I have been able to find in common here is the Firewire element.
Any other ideas? How do I revert?

Work Bencg request Import problem in STMS

Similar Messages

Maybe you are looking for