Work Bench gets error JREW.*

I installed OWB and got a JREW.exe? error while importing tables from Access 97. The jrew file was trying to reference invalid parts of memory. Any ideas.

Did you find a fix to this problem, I've had this happen in two separate environments now, MDAC version is 2.1 OS in WinNT 4.0 SP6a and W2K SP1 ...
This is kind of urgent, any help would be most welcome ...
thanks in advance
Mark
null

Similar Messages

  • My ipad mini 2 is not turning on. I tried to reset with the power/home buttons but it didnt work. I tried to restore it in DFU mode but it didnt work, i get error 4004. Please help me!

    My ipad mini 2 is not turning on. I tried to reset with the power/home buttons but it didnt work. I tried to restore it in DFU mode but it didnt work, i get error 4004. Please help me!

    I also tried the ol' whacking 3 times trick...Didn't work to my surprise

  • Cant install Itunes on my work computer, get error message Apple Application support not found, so i uninstall and reinstall again and its the same message

    cant install Itunes on my work computer, get error message: "Apple Application support not found, so i uninstall and reinstall again and its the same message

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
    tt2

  • BT Vision setup won't work, keep getting Error Mes...

    I have just recieved my new BT Vision box, I already had a BT phone and broadband (with BT HomeHub), with no problems in service with them, and thought the offer from BT Vision was great, but now have noticed several people on this forum having problems with their service, some of their problems are similar to mine; my BT Vision setup won't work, it will not start let alone complete the setup process, I keep getting Error Message CO3.
    It tells me to check my broadband is working; it is. It tells me to check any Powerline adapters are correctly setup, but I'm not using them, because my broadband hub is close to my TV. It tells me to check my cables are connected; they all are, and it tells me to restart my Hub and Vision+ box which I've done several times and achieved no satisfactory result.
    I placed my order on Tue 22 Feb 2011, recieved my equipment on Thu 24 Feb 2011, and was told it would be activated the same day, I only decided to plug it all in and set it up earlier today; Fri 25 Feb 2011. I tried sorting out the problem over the phone earlier, speaking to someone in CustomerCare, and they said it would be activated and working by midnight of 25/02/2011- (before the morning of 26/06/2011), but it isn't.
    I will give my BT phone number only to a BT employee who can actually help me, and get things done.
    The account and order is in my wife's name, but I am the more technically minded, and less easily stressed individual, so would appreciate any advice or assistance you could give.
    P.S. I occasionally, but rarely, have seen other Error Messages such as Error Message CO1.

    Hi Nahar-Hewitt,
    Thanks for the post and welcome to the forum.  I am sorry that you are not yet able to use your BT Vision service.
    The C03 error message can indicate that the order on our system has not yet completed.  This would explain why your service is not working.  Are you still getting this message when trying to use Vision?  If so then I can help.
    Please drop me an email to the email address in my profile. (click on my name and you will find the address under the "about me" section). Include your BT account details and the link to this thread.
    Cheers
    Sean
    BTCare Community Manager
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Update Lumia 820 wont work. Getting error '800710f...

    I have tried to update my Nokia Lumia 820 several times now. But it doesnt work.
    Updates for my phone only work over the air.
    I keep getting the line: Update downloaded, but cannot be opened (800710fe).
    What should I do about this? How can i install the downloaded update??

    http://discussions.nokia.com/t5/Software-Updates/Lumia-820-CV-GB-Amber-Update-failing-with-error-800...
    The silence will fall

  • Autoscaling Application block for Azure worker role console app not working. Get error as The HTTP request was forbidden with client authentication

    I have written a console application to test the WASABi(AutoScaling Application Block) for my worker role running in azure. The worker role processes the messages in the queue and I want to scale-up based on the queue length. I have configured and set the
    constraints and reactive rules properly. I get the following error when I run this application.
    [BEGIN DATA]{}
        DateTime=2013-12-11T21:30:02.5731267Z
    Autoscaling General Verbose: 1002 : Rule match.
    [BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","MatchingRules":[{"RuleName":"default","RuleDescription":"The default constraint rule","Targets":["AutoscalingWebRole","AutoscalingWorkerRole"]},{"RuleName":"ScaleUpOnHighWebRole","RuleDescription":"Scale
    up the web role","Targets":[]},{"RuleName":"ScaleDownOnLowWebRole","RuleDescription":"Scale down the web role","Targets":[]},{"RuleName":"ScaleUpOnHighWorkerRole","RuleDescription":"Scale
    up the worker role","Targets":[]},{"RuleName":"ScaleDownOnLowWorkerRole","RuleDescription":"Scale down the worker role","Targets":[]},{"RuleName":"ScaleUpOnQueueMessages","RuleDescription":"Scale
    up the web role","Targets":[]},{"RuleName":"ScaleDownOnQueueMessages","RuleDescription":"Scale down the web role","Targets":[]}]}
        DateTime=2013-12-11T21:31:03.7516260Z
    Autoscaling General Warning: 1004 : Undefined target.
    [BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","TargetName":"AutoscalingWebRole"}
        DateTime=2013-12-11T21:31:03.7516260Z
    Autoscaling Updates Verbose: 3001 : The current deployment configuration for a hosted service is about to be checked to determine if a change is required (for role scaling or changes to settings).
    [BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","HostedServiceDetails":{"Subscription":"psicloud","HostedService":"rmsazure","DeploymentSlot":"Staging"},"ScaleRequests":{"AutoscalingWorkerRole":{"Min":1,"Max":2,"AbsoluteDelta":0,"RelativeDelta":0,"MatchingRules":"default"}},"SettingChangeRequests":{}}
        DateTime=2013-12-11T21:31:03.7516260Z
    Autoscaling Updates Error: 3010 : Microsoft.Practices.EnterpriseLibrary.WindowsAzure.Autoscaling.ServiceManagement.ServiceManagementClientException: The service configuration could not be retrieved from Windows Azure for hosted service with DNS prefix 'rmsazure'
    in subscription id 'af1e96ad-43aa-4d05-b3f1-0c9d752e6cbb' and deployment slot 'Staging'. ---> System.ServiceModel.Security.MessageSecurityException: The HTTP request was forbidden with client authentication scheme 'Anonymous'. ---> System.Net.WebException:
    The remote server returned an error: (403) Forbidden.
       at System.Net.HttpWebRequest.GetResponse()
       at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
       --- End of inner exception stack trace ---
    Server stack trace: 
       at System.ServiceModel.Channels.HttpChannelUtilities.ValidateAuthentication(HttpWebRequest request, HttpWebResponse response, WebException responseException, HttpChannelFactory`1 factory)
       at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
       at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
       at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
       at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    If anyone know why I am getting this anonymous access violation error. My webrole is secured site but worker role not.
    I appreciate any help.
    Thanks,
    ravi
      

    Hello,
    >>: The service configuration could not be retrieved from Windows Azure for hosted service with DNS prefix 'rmsazure' in subscription id **************
    Base on error message, I guess your azure service didn't get your certificate and other instances didn't have certificate to auto scale. Please check your upload the certificate on your portal management. Also, you could refer to same thread via link(
    http://stackoverflow.com/questions/12843401/azure-autoscaling-block-cannot-find-certificate ).
    Hope it helps.
    Any question or result, please let me know.
    Thanks
    Regards,
    Will 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • After I replaced my iphone 5s, I restarted icloud on my mac. Now ical doesn't work I get error 403

    I got a new iphone.  Changed from an iphone 5 to iphone 5s.  I had trouble with the sync, and in the midst of it I signed out of icloud on my mac.  It told me it would delete everything from my mac.  I signed out anyway.  Now that I've signed back on, I cannot use my ical app.  I get an error "403" to operation CalDAVMigrateToServeQueueableOperation and the ical locks up and I have to force quit.  I have tried to turn calendar off in settings, but it does not help.  I can't find any help on the support pages on this.  Seems people have problems like this, but there is no fix. The calendar on my new iphone is working, although, it's been over a week and it has still not fully restored my whole backup of the phone (32gig).  Could that be part of the problem?  I have been using my icloud calendar on my mac in the mean time, but I would like ical to work.

    Hi mgarcia3,
    If you are having an issue with
    As someone who uses my iPhone almost constantly I can certainly understand how you would be upset to have it not be able to even turn on. Let's see if we can get you back up and running.
    I would suggest that you troubleshoot using the steps in this article - 
    iOS: Not responding or does not turn on - Apple Support
    Be sure to note the last step -
    If the above steps do not resolve the issue, contact Apple.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • ADOBE READER 8.1 WILL NOT WORK-KEEP GETTING ERROR MESSAGE 1606: COULD NOT ACCESS NETWORK LOCATION %APPDATA%

    Have tried to uninstall the Adobe Program but it will not let me.  I keep getting the 1606 error message.  I have went to the Microsoft Help site and it says that the registry may need to be modified.  They also advised you that if you do not modify it correctly you may have very serious problems.

    Please see this Microsoft KB article http://support.microsoft.com/kb/886549/
    Some registry entry may have been corrupted, and it needs to be fixed.  If you don't know how to edit the registry, do you have somebody who is confident enough to edit the Windows registry?
    Anyway, for now I just want you to check something in the registry - don't modify anything yet!
    Click Start | Run | type regedit [Enter]
    Once the Registry Editor is open, drill down to the following subkey
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
    In here you should see multiple entries, one being AppData - what is the data value on the right side?  It should be %USERPROFILE%\Application Data.
    Please close the registry editor now, and report back what you found.

  • Doing clean install but logic studio does not work. Getting Error message

    I have my box Logic Studio 9 upgrade but it will not install on my SSD. Final cut and all other reinstalls worked. Cannot install LP 7 because it is a PPC
    written program. Im trying to do a clean install of the lion OS but cannot get my most inportant program to install. I dont want to buy the program again at the app store. What do think my options are? I've had Logic since 6.0

    Hi
    First, get rid of your designer, the page design/code is a mess.
    There are a number of problems with the page, not least being the disabling of the back button in all browsers I tested it in, (visitors may visit once with this, but are unlikely to do so a 2nd time).
    The menu system is a fixed size so that when the browser is resized it overflows the browser window.
    The use of tables for layout is not recommended as it is inaccessible to users using assistive devices.
    To put this more politely, if you paid for this, ask for your money back. If you did not pay, then start again and use one of the dreamweaver layouts for your page, for more info, see - http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html.
    PZ

  • EPub file that works elsewhere getting error in iTunes producer, error items-9000

    I'm trying to upload an epub file to iBookstore with iTunes Producer. It's an epub file that's uploaded elsewhere with no problems. I am getting this error message ERROR ITMS-9000: "Unable to analyse: chap07.html" at Book (MZItmspBookPackage). Would appreciate any help.. thanks

    Just did a little research. You must publish your book from iBooks Author if you have media files in it. That arror code means that there is a file type error. If you upload using iBooks Author then that code should go away.
    Here is a link to another post that may help you:
    https://discussions.apple.com/docs/DOC-3605

  • My iCloud email does not work. Getting error message that i need to uncheck SSL . This does not work. Help

    icloud Email does not work. When running Connection doctor it indicates I must check or uncheck SSL. This has not fixed the problem

    iCloud email addresses (@mac.com, @me.com and @icloud.com) require SSL. Is your address an iCloud address or someone else?

  • HT1595 Apple TV loses complete internet connection every 5 minutes.  Tried restarting.  Tried unplugging the router, unplugging the modem, and unplugging Apple TV and it still does't work.  Get error message 22 saying it can't connect when I put in my pas

    It only connects for minutes at a time.  I have not changed my router, modem, or placement of my apple tv, modem, or router.  It just suddenly stopped working.  Any suggestions?

    Mine is doing the exact same problem!
    Ever since I rented a movie from itunes with the ATV connected to the internet via wireless (strong signal) from an airport extreme connected to my modem from charter communications (with about 30Mbps speed) it will suddenly stop and by stop I mean it leaves the movie completely and says YOUR APPLE TV IS NOT CONNECTED TO THE INTERNET.
    So if I go to my network in the apple tv menu, sure enough my wireless network is missing. But the ipad is finding it, and the imac on wireless is finding it, and it is working. So we hit restart on the apple tv. When it comes back all is good. Then maybe the movie runs ten minutes and it does it again.
    In some cases the wireless network reappears but if I select it it still says I'm not connected to the internet.
    I have to restart everytime or it will not properly reconnect to the internet or find my wireless net work and actually work and connect.
    It has been connected in the same place for a year and never had an issue.
    Nothing has changed..... I have not added a wall to cause interference....
    My iPad and iPhone show FULL strength.
    Please help!

  • Can't open firefox, get error message: The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read". Firefox won't open at all, not in safe mode or anything. Tried uninstalling and reinstalling, no good, tried creating

    Cant' open Firefox at all, not in safe mode either, tried creating new profile, cant' get in to do that, tried uninstalling and reinstalling, switching off and on, nothing works. Get error: "The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read."
    == This happened ==
    Every time Firefox opened
    == today. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)

    The solution is easy.
    Install "Malwarebytes' Anti-Malware" free edition and use it. This program found malware in your pc. After that clean this malware. Finally instal Firefox again and enyoy it because this installation is correct and clean. Regards.

  • How to check IE error in Runtime work bench.

    scenario: File to File
    *file moves from sender  to archive folder when i start sender cc in runtime work bench but file doesn't move from archive to receiver folder when i start receiver cc in runtime workbench and i think some thing wrong in IE so can anyone help me for the same.i'm fresher so give me your solution as  simple as possible.
    Thanks to u.
    Edited by: manikandansit on Jun 29, 2010 10:41 AM

    below error am getting
      com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
    Display Stack Trace
    Stack trace for the above error message is:
    com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:328)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at jsp_FC_Secure1212318130512._jspService(jsp_FC_Secure1212318130512.java:24)
         at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.lang.NullPointerException
         at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doProcessAfterInput(CmDynPage.java:60)
         at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:101)
         at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
         at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
         at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         ... 20 more
       Wait...
    Query being processed

  • ITunes no longer works on my Windows VISTA system.  Get error msg saying C runtime library incorrectly... Error 7, Windows error 1114..

    iTunes no longer works on my Windows VISTA system.  Get error msg saying an application is attempting to access C runtime library incorrectly... Error 7, Windows error 1114.  Same msg, or one that says unable to install, when trying to update or reinstall iTunes.  iTunes worked well up until about a month ago when this error msg starting appearing.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

Maybe you are looking for