Work book Broadcasting Issue

Hi Experts,
I have got A pre Calculation server installed in one of my XP Machines. The pre calculation server is functioning properly.
One problem I am facing here is when on the same pre calculation server when I schedule or Direct Broadcasting is done
in Production server the output comes as junk. As we all must have seen in excel when the work book is created in the
higher version of excel and opened in lower version it opens as junk. it is opening is the same fashion
but
in Development server the output is proper.
The best part is that in both the servers the same Pre calculation server is used.
Pl put some light on this
Thanks
Shivani

Hello Shivani,
- Please check that the workbook being broadcast opens & refreshes ok on the precalculation server.
- Ensure that the precalculation server is patched to the same or higher level then Analyzer.
- In any case, please test the latest FEPs for Analyzer & Precalculation.
> BW 7.x precalculation service SP1300 - GUI 7.10 (note 1413028). All download info & installation instructions can be found
     in the same note. The installation guide is also attached to the same note. **Note, in the precalculation service please
     maintain the user with windows system administration rights instead of the local system account user as mentioned in the
     installation guide on page 13.
> BW 3.x Add-On Front-End SP10 (see note 1413154)
> BW 7.x Add-On Front-end SP1300 (see note 1413030)
> SAP GUI patch 18
Thanks,
Michael

Similar Messages

Broadcasting a Work book in BI 7

I am trying to Broadcast a work book in BI7. I have set up every thing like Precal server ..etc and all running fine. But the work book received by the recipient is having empty data . But if I run the work book from BEX analyzer , the report I having data .
Please suggest where I am missing any thing in the setup
This broadcasting was working fine before we move to BI7.0(in 3.5 they were fine)

Hello,
SPRO check INT Mail server setting (SMTP) Setting.
SPRO-> BUSINEED INTELLIGENCE-> SETTING FOR REPORTING->SETTING FOR IB->SETUP MAIL SERVER.
THANK,
KISHORE

Broadcasting empty work books

Hello!
I am using the Information Broadcasting services in SAP BI.
Iu2019m sending a precalculation work books to the users.
But Iu2019ve some trouble. The system is sending books if they also empty.
For example DSO has 2 bus areas but Iu2019ve 3 translation.
The user received 3 work books. 2 of them were full and 1 empty.
Is it possible testing books and finishing send process before sending work books if they empty&

Hi ,
You can check T.Code SOST to check the mail which you send with your ID.
Check this also:
/people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-i
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1040cd4c-0893-2c10-938a-c3dfbc697c1f?quicklink=index&overridelayout=true
Thanks
Hemav

Work book issue

Hi BW Experts,
We did stack upgrade 13 in Bi 7.O.
We got issue with work book title name is not displaying.Before stack upgrade it was good.Any solution for this.
Thanks,
Chinna.

problem solved.
Thanks

Address book sync issues

Hi,
I just added a new group within my MAC (10.4.10) Address Book (4.0.5)
and when trying to sync it with my iPhone (1.0.2) , iTunes (7.3.2) always
shows only the old groups - not the new one.
Here is what I did so far to try to make it work:
- Reset Sync History in iSync
- Deleted all the groups in Address Book and created new ones (different names)
- Power-off iPhone and MAC and rebooted both
- Plug-in iPhone, but iTunes still got the 'old' groups
Any idea how to fix this issue - meaning 're-initialize' iTunes on what to sync?
Rather than doing a factory reset of my iPhone just to see that iTunes still does
not check my Address book for changes etc. I thought I give this forum a try.
Not sure if I screwed anything up when I removed all the files in my ~/Library/
Application Support/SyncServices/Local/clientdata/... folders that contained a
clientname.txt file with "Markspace" in it to finally clean up my "Missing Sync"
removal.
Thanks in advance for any help!
Joerg

OK,
just got back after talking to a 'guru' ay my local Apple store.
He also 'factory reset' my iPhone and it then perfectly synced with his
AddressBook, so we know the phone is fine - what a surprise
His assumption was that I have a corrupted AddressBook preference
file and recommended to erase it, reboot my system and everything
should be OK.
Well, it isn't. I did what he told me and also used the DiskRepair Utility
to fix my disk permissions (that had 'ton's of errors with something
Address Book related issues, but still no solution. The thing just will
not sync. As soon as I plug in my iPhone, iTunes shows my old Contact
groups that I removed yesterday.
Anybody any idea???? I am thinking about completely removing my
Address Book , but how do I re-install it from the original CD without
having to do a complete system re-install?
Thanks for any help!

Error After sharing work book

Hello All,
I modifed a report by adding 2 news columns from a folder(which is based on table2). I am able to genrate the work book successfully.
So i shared the same work to another user , but while user is running the report he came across an error
saying "Invallid Comination of Joins Invloving Outer Joins - table1 -> table2 (outer) ".
How can this be possible. If there is something wrong in join conditions work book should not work for me.
It is working fine in my case but its giving error when the shared user is running. Please let me know the reasons for this.
Kind Regards,
Kumar.

Hi,
I think your answer is in Tamir's reply. If disabling fan trap did not resolve your user's issue, then the report needs to be rewritten. Even if it did resolve your user's issue, the report needs to be rewritten.
It would be difficult for us in this forum to help you to do this.
However, things to look for: How are your folders constructed? One folder, one table? One folder, many tables as in custom folder or database view? If you are joining folders together in the report where any or all of the folders are constructed with many tables included in them, you run the danger of hitting the fantrap issue - especially, if outer joins abound. Try flowcharting your report and see what that tells you. In Discoverer Plus, choose Sheet \ Show SQL\ copy the sql and place in your favorite sql tool. I suspect the answer to your issue will become obvious then.
Regards,
Nancy

Work book Transport BEx Analyser

Hi Experts,
I have a work book which I assigned to menu roles in Dev BW and need to get it transported to BW prod system.
I normally save this work book in roles and in my customised role and collect that work book in request to transport to prod.
I have a this problem in prod when I try to open the same work book in Prod system I have error message saying serviere program error has occurred and cannot open the work book in prod system.
please advise.
Is this problem with BEx Analyser or If I transport my role again to Prod system which is customised under which work book is saved.cant solve this issue please advise.
If I want to transport the role also how can I do that from PFCG my role name is ZXX_BW_XX.
Regards,
Tati.
Edited by: Tati Santhosh on Nov 10, 2010 9:41 PM

Answered

Doubt in Work Book (display Variables orderly)

Hi,
I am working in BI 7.0.
I have a work Book with 4 Queries
each Query has a characteristic Variable
say 1st Query has a variable ZABC1
say 2nd Query has a variable ZABC2
say 3rd Query has a variable ZABC3
say 4th Query has a variable ZABC4
When I am Executing my Work Book
Variables not displaying orderly
they are displaying
ZABC2
ZABC1
ZABC4
ZABC3
I need to display like this, Orderly
ZABC1
ZABC2
ZABC3
ZABC4
can any body give some Idea ?
I have searched in SDN too, no information.
surely points rewarded
Thanks
Prasanna

Hi,
Edit the workbook according to your variable display. Like, insert a row before ZABC2 variable, cut the variable ZABC1 and past it before ZABC2.
now you will see like this.
ZABC1
ZABC2
ZABC4
ZABC3
Now, do the same thing again for 3 &4 variables. Insert a new row before ZABC4. Cut ZABC3, and paste before ZABC4. Now the variable will be displayed as follows.
ZABC1
ZABC2
ZABC3
ZABC4
now, Click SAVE button and save as existing workbook.
I hope you can handle your issue now.
Regards,
S P.

Business Areas, Folders and Work Books

Hi,
We have approximately 20 business areas and around 200 workbooks. We are trying to reduce business areas. We are creating 4 new business areas ,under which I want to import all 20 business areas into 4 new business areas. So I am coying all folders under 20 business areas into 4 new business areas.
I am unable to do the same with workbooks. Now ,when we are trying to open the workbooks, we are having issue in opeing the workbook as workbooks are referring old business area folders. I want to opne the work books refering folders with in the new busiess areas.
Is there any way to do this other than creating workbook again?
Thanks.

Hi,
D4O do not uses any business are as it is used for OLAP reporting. You cannot have an option/prompt to user to select a particular analytic workspace.
If you grant access on AW$<AW Name> object to the user then the user can see everything inside that workspace. If you want the user to see both the workspace then you should grant the select privilege to both AWs.
Suppose the two workspaces are in two diferent schemas i.e. schema1 and schema2 having AW1 and AW2 as the workspace respectively. If you want to grant access to both the above workspaces to user say user1, then you should grant privilege like this
grant select on schema1.aw$AW1 to user1;
grant select on schema2.aw$AW2 to user1;
The above grants ensure that the user1 can see all the cubes in both the workspace. Ensure that the user1 should have D4OPUB and OLAP_USER role granted.
Thanks
Brijesh

Work book save error in SAP business objects in bi platform

Hi,
We are facing issue for saving workbook in SAP Business objects in bi platform.
While saving work book it's asking user id and passowrd and webservice URL. after entering this it's asking to enter proxy user and passowrd.
Please suggest what is the proxy id and password we need to give here or any configuration we need to do to connect workbook with sap business objects.
Error: Proxy error 407 and Authorization failure.
##Screen shot attached##
Thanks & Regards,
Sreekanth Reddy

Atul,
Check if you are able to login into Manage Servers through Central Configuration Manager.
If thats successful, the issue is either with Krb5.ini or bscLogin.conf file.
You can check http://service.sap.com/sap/support/notes/1631734 and download the white paper to go through the settings.
Make sure there are no white spaces in Krb5.ini and the format is correct.

Work book

Hi experts,
I have made some changes in properties in the existing query for one of the characteristics and executed successfully in development.
But the issue there is an existing workbook created on this query.when i open this work book and executed its not showing the modified values.I want to save the existing work book with modified properties values which the query out put dsplays
The requirement is Detail WB > Refresh the query to the workbook and resave the workbook so the workbook reflects the decimal places the same as the query.
can anyone suggest me how to do it.
Thanks
Edited by: sreeanil on Dec 24, 2011 6:41 AM

HI,
You can refer the following document :http://wiki.sdn.sap.com/wiki/display/BI/ChangesmadeinQueryisnotreflectedinWorkbook
It shows you how to reflect the changes made in the query definintion to the workbook.
HOPE its of help for you !!!!

Work Book is not opening

Hi,
any one encounted this type of situation with Work Books.
I am using BI 7.0, BEx 7.0.
I have a Work Book with 30 sheets each sheet has one query.
Today after saving the work Book ,
Now when i try to open the work Book it is not opening.
I don't no what is the Problem.
When we open the work Book
in status bar i can see BEx Analyzer is Processing then
after some time status is Ready,
But work book is not opening.
I am really wondering the behaviour of BEx,
I saved the Work Book now and it is not opening.
Help me to resolve this issue, sure I will assign points.
Thanks
Prasanna

Hi,
after searching in SDN ,
i found Function Module RRMX_WORKBOOK_LIST_GET
then I check in system in FM, it is showing the workBook.
but my Problem is how to Open my Work Book ?
any Idea will be appreciated with points.
Thanks
Prasanna

Function Module to Execute BEx Query and Save as work book.

Hi
I have a requirement for executing the Query after the data is loaded into the cube and save as Workbook and emailing to the user. Is there any Function module to Execute the Query and saving as Work book? . Please suggest me the way how to approach the problem.
Thanks for your help in advance.

Hi,
It is possible to execute the Query and send the result as workbook vial email to the user.
For that use should use Information Broadcaster.
Steps:
1. Goto information broadcaster.
2. Choose object type as "Query"
3.Click create new setting.
4. Give description and choose distribution type as "Broadcast E-mail"
5.Choose output format "XML(MS Excel)
6.In recipient tab Give valid e-mail addres which you want to send.
7.Save it. and give technical name
8.Click schedule.
9.choose "Execution with Data Change in the InfoProvider " correspondig infoprovider will be shown (check the check box)
10. that's it. whenever data loaded in your infocube, it will be automatically executed and send to user mail.
<removed> if u want more information let me know.
Regards,
Senthil Kumar.P

Lync 2013 - Address Book Synchronization Issues for External Users

I recently deployed Lync Server 2013 in my organization. Everything works fine except for the address book synchronizing issues and the mobility access. I would really appreciate if someone could share their knowledge as I have done lot of troubleshooting,
not sure if I have missed something. Please note my setup below for the External Web Services.
Lync Front End:
Listening: 8080 4443
Published: 80 443
I have published my External Web Services URL and the following ports are open: 4443, 443, 8080
When I look at the Lync Client Configuration, ABS Server External URL is pointing to https://lyncexternalweb.domain.com:443/abs/handler. However, GAL Status is still pointing to my internal Front End FQDN: https://internal.domain.com:443/abs/handler.
For machines that are joined to the domain, the address books synchronizes with no issues. For machines that are not joined to the domain and for external users, GALContacts and GALContacts.DB files are not event generated for the users profiles.

Hi Anthony,
Please note the findings below:
1. I was checking the Lync Client configuration on one of the PC that is not joined to the domain, still on the domain network via site to site VPN connection. I noticed that the Connected Lync Server varies: sipinternal.domain.com, sipexternal.domain.com,
lync.domain.com (Pointing to the Edge Server IP).
2. Edge Server External Settings: Single IP address with the FQDN set to lync.domain.com for all 3 services and the following ports configured. Access Edge Service: 5061, Web Conferencing Edge Service: 444, A/V Edge Service: 443 with NAT enabled public
IPv4 address. I have checked the replication status between the Front End and Edge Server, it is up to date.
3. In regard to the https://lyncdiscover.domain.com, I don't have the lyncdiscover.domain.com published, but it is pointing to the NAT enabled public IPv4 address which is assigned for A/V Edge Services.
4. For the port forwarding, I am using the Cisco Meraki router.
Please advise if there are there is something that I am missing.
Thanks!

We have concerns with Adobe Acrobat DC - document cloud services and how it relates to HIPAA. Has anyone else worked through these issues?

We have questions relating to the Document Cloud services offered with Acrobat DC. We are considering disabling the cloud feature to stay in compliance with HIPAA. Has anyone else worked through these issues?

Hi mikem82897618,
You can refer the following link to know what can be done with Adobe Document Cloud Services when working in Acrobat DC:
Store Files Online, Share & Access From Anywhere | Adobe Acrobat.com
Also, visit this link to know more on how Adobe Document Cloud services are compliant with HIPAA security standards:
E-signatures vs digital signatures | eSign services from Adobe
Please specify more details on the same as why you would need to disable the Cloud feature.
What and where exactly are you facing the trouble?
Let me know.
Regards,
Anubha

Work book Broadcasting Issue

Similar Messages

Maybe you are looking for