Work book, web reporting, workflow, structures

HI all,
Can u please send the any of the documents which is mentioned above..it will b very helpful
Points assured
Email: [email protected]
Regards
Pushkar

Hi,
Check these
WEB REPORTING:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ec20a990-0201-0010-f291-d1d039975e41
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a249a990-0201-0010-e18e-b2f5ed135497
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bc4fa990-0201-0010-588e-ca4e63050d6d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b931a890-0201-0010-268d-a7bedf8aa720
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f0aca990-0201-0010-0380-f3aac4127a57
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3541a990-0201-0010-f1ae-b24b72690df7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2642ab90-0201-0010-9193-d59de66cbab4
Regards,
R.Ravi

Similar Messages

What is the right sdk api to work with webi reports in BOXI Release 4?

Hello,
I just read in the omg model for rebean (sdk for working with webi report documents) that all functions to access the report structur and layout are no longer availabe beginning with Release 4.
Can anyone confirm, that this is the case?
Are those functions moved to a different SDK component?
Thanks in advance,
Bernd
Dokumentation about rebean _omd
u2022 The object model shows many funtions , classes in red which means:
Note: The Classes, Interfaces, and Methods marked in red are no longer functional from the SAP
BusinessObjects Business Intelligence Platform 4.0 release onwards.
u2022 Among those functions are all !! We need to analyze the report layout
u2022 No longer supported: DocumentInstance.getDictionary() , DocumentInstance.getOpenDocumentInfo(), DocumentInstance.getResourceManager(), DocumentInstance.getStructure()
u2022 Classes no longer supported: ReportElement, ReportDictionary, Query, QuerySorts, DataSourceObject(s), SQLDataProvider,QueryNode, DPExpression, QueryContainer, Link,
u2022 Classes no longet supported: ReportBody, ReportContainer, ReportStructure, ReportBlock, Graph, *Table
u2022 Classes no longer supported: Cell, PageHeaderFooter

Thank you for the information srrachna !
Well, the point with the report engine sdk is a surprise. What is the sense of new functionality when you cannot use it (spoken for the api processing), and in addition when the new functionality eliminate functionality which was available before in the sdk.
In my view this cut is to hard. The .pdf speaks from deprecated, but the blog and the information in the report engine api speaks a different language. The functionality is not just deprecated but no longer available.
Hope SAP will address that before relase 4 becomes GA in May 2011.

LOVs not working in Webi Report for SAP BO 4.1 SP 2 Patch 3

Hello ,
I have developed reports and universes in SAP BO 4.0 SP 5 and i have migrated those reports to higher version of BO which is 4.1 SP2 Patch 3.
My universe is working fine with LOVs but when i run the webi report , the LOVs arent working.
have anyone facing the same issue. any idea why the LOVs arent working on higher version.?

Hi Victor,
The List of values we will assign in universe in order to get filtered data works on universe query panel
but the same objects when i am using in report(webi report) , the List of values are not working .i.e
they are not getting displayed in webi report.
for ex: i have country object having country names as LOVs and state objects having state names as LOVs . Now when i select Country value , the LOVs of state objects should get filtered and shows only states which belongs to country .
the above logic is not working in webi report , i am only able to select country and when i go for state, the state names do not get filtered.
please let me know why this is happening in the SP2 patch 3 version and its working fine for SP2 , but the chrome issue gets solved after applying patch 3 and not if we only upgrade to SP2.
the webi reports are not working in chrome browser if we using SAP B04.1 SP2 and lower version
but the LOVs are not working in SAP BO 4.1 SP 2 patch 1, 2,3.
kindly help me with the issue

Change order of key figure is not working in Web report output (using WAD)

Hi,
We are using BI 7.0, release 701 and level 008. We are facing problem in WAD (web report output). When ever we do 'Select filter' for key figures and 'change the order' of key figures, it does not get reflected in new order. Though drag and drop of key figures is working.
Though same change order is working fine in Bex Analyser.
Kindly suggest some inputs.
Thanks.

Hi,
On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
Regards,
Bhagyarekha.

"Execute" is not working in web reports

Friends,
" Execute" link is not working in web my report. And also the selection screen is blank for style sheets. Do you have any idea about the cause?
Joe

Also check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP..

Query level filter not working in Webi report

Hi All,
I am using BOXI R3.1 (SP3), m facing one problem when refreshing Webi report on daily basis. I am using three query level filter as a prompt, but i checked one filter is not working then i need to reapply this filter and rest 2 filter is working fine.
Can anyone suggest me why problem is coming?
Regards,

Hi,
Prompts are interactive, and come from the query panel. Filters are not interactive, and are set on the report or block. There are also input controls, which are interactive filters
1. Select the universe in the list of universes to open the Query Panel.
2. Drag the Year object to the Result Objects pane.
3. Drag the Number of Guests object to the Query Filters pane and create a report filter that restricts Number of Guests to greater than n.
4. Click Combined Query.
The Combined Query pane appears in the bottom left of the Query panel with the two queries joined by UNION.
5. Click on the second query and remove the Year and Number of Guests objects.
6. Drag the Reservation Year object to the Result Objects pane.
7. Drag the Future Guests object to the Query Filters pane and create a report filter that restricts the future guests to greater than n.
8. Click Run Query.
Best Regards
Naveen

Zero Rows suppression is not working in Webi report.

Hello Gurus,
I have created a Web' report on top of BEx query. I am getting the report with Zero values. I want to suppress the rows with Zero values. When I ran the same query in BEx it is suppressing the zeros. (I have the property to suppress the Zero values int he query as active). Why Webi report is not recoginizing the property of the BEx query.
Please advise.
Thanks,
Aruna..

Hello,
I am facing the similar problem...I want to suppress 0 values in my report. I am using RDBMS - BOXI 3.1 SP1 (Reporting through Webi)
I have tried the above mentioned filter at Webi Level, but no luck.
Description       p1       p2       p3
Wages              0         0         0
Exp                   100      25       50
My requirement is the row, with all the columns with 0 should be suppressed.
Appreciate your help.
Thanks,
Anushka
Edited by: Anushka Bidesi on Aug 11, 2010 11:38 AM

Query Filters not working in webi report.

Hi all,
I have a bex query where i have some filters on Key figures but when i run that query on webi report i dont get exact data as in bex...
There are no other filters i have applied in webi, but i am not able to see the exact data..?
what may be the issue....

Thanks for the earliest reply.......
I am using Business object XI 3.1 SP 1 FP 0.882.
In webi i can see all the values i.e I have applied filter on key figure TARGET GI QUANITY which brings only that quantity which has missing parts.
But i get all the quantity in my webi report.
so what can be the issuse....?

Context Menu not working in Web Reports

We are on BI 7.0 (ABAP stack only). I am unable to see context menu for 3.X web reports in 7.0 environment when we have "Only Hierarchy Navigation" property checked in web tenplates (WAD 3.X). Where as in production, on 3.0B system (not upgraded) when we have "Only Hierarchy Navigation" property checked in web template i am able to see context menu on header row of the reports. Not sure what i am missing?
Reposting again to get some attention! Sorry for the duplication.
Appreciate all your insights.
Thanks.

Also check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP..

Join is not working in webi report

I have let's say three tables; one fact and two dimensions;
I manually joined each dimension table with the fact with 1 to many cardinality...
Now I'm trying to run a test report using few fields from each dimension and it doesn't seem to join; in the SQL Viewer in Edit Query mode, it has two queries under Synchronization...it doesn't show a joined query between tables....
I have a similar setup in another universe that is out of the box solution and that seems to work just fine...
Am I missing something here...Please help!

Hi Ahmed,
Along with the context that is present in your universe, check under the parameters the fifth tab i.e. the sql tab.
In this see whether the options are checked or not.
the options :
1.Multiple sql statements for each context.
2.Multiple sql statements for each measure.
Gaurav

Execute link is not working in Web report

Friends,
" Execute" link is dead in web my report. And also the selection screen is blank for style sheets. Do you have any idea about the cause?
Joe

Hi,
On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
Regards,
Bhagyarekha.

Variable exit in sap bi 7.0 is not working in web report

Hi Experts,
I had wrote a variable exit to get latest run date at variable screen for a variable.On the base query i have created query view.This query view is working fine when i am viewing from analyzer but on the web Im not getting latest run date but it taking some other date.
Can any body suggest any thing why system is behaving so strange.
Thanks
Vinod

Hi, Succhi
Note 1621031 - Incorrect status I1054 "To be distributed"
Note 1620893 - Screen output without connection to user - SMQ1
also check program CRM_DATAEXCHANGE_TOOLBOX
Denis

Menu options not working in web reports

Hai,
I made a template in WAD based on a query view. When I publish, none of the options in the menu, that appears when I right click on the characteric object, "Keep filter value, select filter value, remove drill down" etc. allof them doesn't work. When I click on them nothing happens.
When I got to Tools>view definition>based on another query, the data is displayed without my formatting like chart and all but everything works there.
Can someone help me identify whats the problem?
Thank you.

Hi,
In the Web Application Designer, in the Properties area of the web item, you can set the option Objects with navigation links to 'X' in the Web Item tabpage, under General.
Objects with navigation links (GENERATE_LINKS).
X = Yes
= No.
For Table web item there's an option Only hierarchy navigation (ONLY_HIERARCHY_NAVIGATION).
X = Yes
= No
If set to 'X' the context menu is hidden in this mode, and you can only expand and collapse from the list.
Check this option also.
Hope this helps.
Regards
Hari
Message was edited by: Hari Krishnan K

Does Merge dimension button work on BI OLAP Universe webi reports

Hello all,
we are using BI 7.0 queries as our datasource for creating universes. When we are using the webi rich client to create a query, there is add query button and we are able to add query but once I add query I am not able see the Merge dimensions button active, is there some setting that is missing or this capability is not active for BI OLAP query universes?
Thanks in advance for the answers.

HI,
Merge Dimension button is working on webi report based on OLAP universes.
Check you have the rights in CMC for merge dimension if it is happening all reports.
Under Home > BusinessObjects Enterprise Applications > Web Intelligence it is possible to set the Merge dimensions for synchronization right for groups and users.

Changing Webi Report Data Provider With Prompt

Hi All,
I am trying to change Data Source of a Webi Report using RESTful Web Services. Fo this I have referred code on Changing Dataproviders for a Webi Report using RESTful Web Services Post.
I am able to change data source for Webi Reports without Prompts but it is not working for Webi Reports with Prompts.
Can anybody help me??
Thanks & Regards
Swapnil Kulkarni

Hello Swapnil,
In order to perform a change data source, you have to answer the prompts (like in the regular Webi UI). In this kind of case, RESTful webservice will send back the list of parameters needed after you submitted your target mappings. Then, you have to answer prompts and send all the information (mappings + prompts answers).
Does it make sense?
Best regards,
Anthony

Work book, web reporting, workflow, structures

Similar Messages

Maybe you are looking for