Work center category does not exist in CNR1

Hi,
While creating a work center through CNR1, I am getting the error 'Work center category 008 does not exist'. I checked  OP40 and the work center category is maintained there. Also the category 0008 has application maintained as Recipes.
Let me know if I am missing anything here.
Thanks & Regards,
Soumya.

Hi,
I feel so. If your using the work centre category for project managment, then, application management will be assigned to N, then you can use CNR1, which is the T code to create work centre in Project management.
In the standard system, Work centre category for project management is 006.
Pl. try creating the work centre through CRC1 for process manufacturing.
Madhava

Similar Messages

  • BAPI_SALESORDER_CREATEFROMDAT2 Error "Address category does not exist"

    Hello everyone,
    I have the following error "Address category does not exist" when executing bapi "BAPI_SALESORDER_CREATEFROMDAT2" from a user application, the error is not constant, meaning sometimes shows and sometimes does not, I´ve been investigatnig regarding this and it seems to be a buffer problem, found SAP Note "1232196 - Inexplicable error in BAPI" and implemented FM "SD_SALES_DOCUMENT_INIT." as solution described, but it's still not working, does anyone faced this problem before that could help me out?
    Thanks in advance for your replies.
    Regards,
    Julio Cesar

    Hi julio,
    I guess this error occurs due to some pre configuration issue with the value by which your creating the sales order. Have you tried creating sales order with any other value or with just header data.
    Regards,
    sivaganesh

  • System message 38 from work area ssfcomposer does not exist in va03

    Hi,
    I created a smartform copy from standard, it is working good for all sales order,but for perticular one sale order it shwing error like
    system message 038 from work area ssfcomposer does not exist.
    i have long item line in this sale order what can i do please help me.
    Regards
    KK

    If I am not wrong, I guess you are using template/table inside your smartform.. which is causing the error.
    I issue could be because of the condition on the text inside the template which might be overlapping the output structure line and column. The issue can be also be because of your table cell.
    To trouble shoot place a false condition(like 1 = 2) first on table and if error still occurs then remove condition on table and place it on structure.
    I guess, the above answer will help you to close the thread.
    Regards,
    SaiRam

  • Sytem message 047 from work area SSFCOMPOSER does not exist

    Hi Friends,
    When I am trying to see the print preview of a PO I am getting this error msg
    "Sytem message 047 from work area SSFCOMPOSER does not exist".
    I had checked the forum and the System message was 046, but the error is not solved.
    Regards,
    Anu.

    Wrong forum to post the issue.
    VJ

  • Product category does not exist in logical system

    Hello Experts,
    Need help in understanding product category change behaviour.
    Shopping cart created and approved.
    PO created and approved.
    Now PO change version created by changing product category.
    Please enlighten me whether this change is really allowed on business perspective and SAP perspective.
    So far we been told that there is business case to justify this change.
    If allowed by SAP, then how do we solve the problem of error occuring in workflow "product category does not exist in logical system XXXX".
    Please advise.
    Thanks,
    Gaurav

    Hi
    I dont have  a system right now to check
    1.are you ordering the item from external catalog? ( any  mapping between catalog product category to SAP product category )?
    2. after approved PO created.
    3. Now BUYER could change the product category again?
    4. why the BUYER takes push ups for REQUESTER . Let Buyer cancel the PO and ask requester to create a PO.
    What is the business process existing in your business ?
    Since product category determines purchase group and every thing like gl account etc..
    Can you recreate the same issue in development box?
    Note 1466155 - GL account not re-determined on change of product categorySymptom
    You have an SRM PO with items having multiple account assignment. Go to the PO item overview OR to the item basic data tab and change the product category. However, this does not trigger a new GL account determination for the accounting lines.
    Note 1407962 - Category is editable when contract is assigned in PO item
    Symptom
    When ever a Contract item (Free text or Product Category) is assigned to a Purchase order free text line item, The category modification is not allowed.  This is because the product category is always copied from the contract item and overrides the Category for Purchase Order Item. It is confusing for the user as the category is editable and can't be modified.
    SAP has different different behaviors . Kindly tell us what type you belongs too...

  • Fund Center Z001 does not exist in FM area and fiscal year 20.01.2010

    Dear Expert,
    We have activated Funds Managment in quailty Client. but when ever we are trying to create PO below error message is coming:-
    Fund Center Z001 does not exist in FM area and fiscal year 20.01.2010
    Message No-F6580
    Also when ever we are trying to post an FI document the same error message is coming.
    Please advise with T-Code.
    Regards,
    Alok

    Dear Mr Srinu,
    The Z001 problem is solved by creating a fund centre using FMSA. Now while doing the shipment cost below error message is coming:-
    1.Account Assinment to Commitment Item not supported with this GL account. Message no-ME032
    2. No Funds center entered /derived in item 00010(1020/302401/)
    Pl help,
    Regards,
    Alok

  • Funds center 000000 does not exist in FM area  and fiscal year 15.06.2009

    Hi Expert,
    When I tried to cancel Invoice via MR8M, I get Error message "Funds center 000000 does not exist in FM area  XXX and fiscal year 15.06.2009"
    Please tell me what is wrong here.
    Thank you.
    Regards,
    Henry

    Hi,
    That's the message from Funds Mangement component. You have to check whether the derived fund centre is the right one and if yes, create it via FMSA transaction.
    Regards,
    Eli

  • Partner profit center 855013 does not exist for 8/27/2008

    Hi FI Guys,
    Iam basically MM guy,i need some help on this FI issue.Could you please help any body please.
    Based on the user issue below,i found that thevalid profit center was maintaining in Material master and the G/L account was may not be assigned to G/L account.
    please reply step by step.
    issue from user:
    Iu2019m trying to obsolete some material using MB1A, movement type 951 and the disposal account # 13560002, but after I enter all the information and try to save it I get the following message at the bottom of the screen: u201Cpartner profit center 855013 does not exist for 8/27/2008u201D.
    Thanks&Regards,
    Babu
    09930154536

    Dear Babu,
    The Profit Center of the selected material has expired validity. Just extend the validity through KE52 and press the button 'extend the validity period' to current year. I think that your problem will be solved.
    Trust this helps much!
    Cheers,
    Ashok SINGH

  • Profit Center 990612 does not exist in Company Code XYZ

    Dear Friends,
    During the time of posting through t.code F-02 than system is showing the below error :-
    Message no Z1008
    The Profit Center entered does not exist in this company code.
    Enter the correct profiot center which belongs to this company code.
    To search for profit center by comapny code, use matchcode type
    'Z' - Profit Center by company code and name.
    Please advice.
    Thanks & Regards,
    Pankaj

    Hi Pankaj
    This message is a Z message, which means your own creation
    Go to OB28 and check where have you written the Validation step to check this
    Also, check if the PC exists in that comp code or not
    br, Ajay M

  • IW32 - Capacity category does not exist or cannot be selected

    We are getting the bellow error upon exiting IW32, could you please tell us how to resolve
    Capacity category does not exist or cannot be selected
    Message no. CY374

    Hello Ehsan,
    This message also appeared for the first time after we applied EHP5, a note has been released regarding  (Message CY374)see  SAP note 1547467 for resolution and implement note 1504266 .  
    regards
    Spencer

  • Subject profile category  does not exist  CRM_SUBJECT_PROFILE001

    I have configured charm in our Dev system.
    In transaction solution_manager ->change request management-> create
    I get the following message:
    Subject profile category  does not exist (system error)
    Message no. CRM_SUBJECT_PROFILE001
    Did I miss something in the configuration?
    I configured a test system some time ago and did not have this issue.
    Thank you!

    Answer found, note 898614

  • Subject Profile Category does not exist

    Hi,
    System: CRM2007
    I have created a new subject profile Z* and assigned it to Subject Profile Category Y. When going to the next level (code group profile for Subject Profile), I get the ff. message:
    "Subject profile category Y does not exist (system error)
    Message no. CRM_SUBJECT_PROFILE001"
    Why does it not work?
    Thanks
    Anke

    Hi,
    For which scenario are you using the subject profile??
    If you are using it for service then please maintain the Subject Profile Category as "A-Service" while defining the subject profile.
    Regards,
    PePe

  • Reporting using SSRS not working - logon session does not exist

    Hello All,
    After installing the 'reporting site system role' and configuring (using MS technet reference guides), I see the report folder under my Monitoring-> reporting->reports folder;
    When I click on a report and 'run', I get the following error:
    "the default value expression for the report parameter 'usertokenSIDs' contains an error. A specified logon session does not exist. It may already have been terminated"
    details:
    System.Web.Services.Protocols.SoapException: The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist. It may already have been terminated.
       at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
       at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
    Microsoft.ConfigurationManagement.ManagementProvider.SmsException
    The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist. It may already have been terminated.
    Stack Trace:
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    System.Web.Services.Protocols.SoapException
    System.Web.Services.Protocols.SoapException: The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist. It may already have been terminated.
       at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
       at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
    Stack Trace:
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    The account I'm using is a domain account with 'full' permissions to compliance security role. I also verified the individual object level permission and it holds good. I'm not sure what I'm missing here.
    Any help on this is greatly appreciated. thanks

    I talked to a member of the product team and they agree this is not a solution. He has not heard of this issue before and STONGLY recommends that you contact CSS for support. This is the only way this is going to be fixed permanently.
    It is my guess that if you ever apply a service pack 2 or other updates to CM12, this problem will re-occur, again this is my guess this will happen again.
    Remember that if it is a bug then there is no charge for the support call.
    http://www.enhansoft.com/

  • Address category does not exist

    Hi All,
    I am facing the issue while i am creating a sales order from service order ( Transaction code IW32) , i am getting the warning message sayuing that Address category doew not exist ;Mesage no VP 700.
    Kindly help..Its urgent needs to rectify the same as this is business requirement.
    Regards,
    SK
    Edited by: Mastan Shaik on Jul 21, 2011 12:14 PM

    Hi mastan
    Check this links
    SD: Error while reversing post goods issue
    hope it will help to you
    Regards,
    Krishna

  • Message 046 from work area SSFCOMPOSER does not exist

    Hi Gurus,
    The above is the error I get when I try Print preview from ME23N. The situation is that the project went just live. While PO printoit is working in QA system, in PROD system the above error comes up.
    In SE91 for both QA and PROD system, I checked for the message class 046 but I didn't see any.
    Pls guide me to what I am missing. Smartform is in both the systems.
    GP

    Hi,
    Actually the error happened be due to the difference in object level between QA and PROD.
    When we did SU53 in PROD system at the time of the error, a partcular object was missing in PROD.
    It is resolved now.
    Thanks.

Maybe you are looking for