Work center Change
Hi All,
How to change the work center once its get combined?
Can I change my child order work center after creation of combined order?
Dear Hardik,
There are two options:
1. Change the workcentre in Routing and do Read PP master data which will pick up the current Workcentre (Provided no Goods Movements are carried out on order). The status of the order will be changed from REL to CRTD.
2. Manually change the Workcentre in Order.
Regards,
Pradeep
Similar Messages
-
Work center change in Service order not happening
Hi Experts,
I am facing a problem when i try to Call a function module in update task where the Function module contains a call to BAPI_ALM_ORDER_MAINTAIN without COMMIT WORK.
This is done in order to update the Work Center while there are changes to the Warranty Status of the Repair Order.
So , i have written the Code in the Userexit_SAVE_Document so that the Update gets done.
But there might be problems when the Repair order does not get saved.
So keeping that scenario in mind, I tried using the Update task Function Module in which i wil lbe calling the BAPI for Changing/Updating the Service order.
BUT , The Change is not getting reflected in the Work centre of the Service order.
Thanks
VIJAYB
Edited by: Rob Burbank on Jun 5, 2009 10:10 AMHai experts,
i have found the way to do the work center change in update task method .
I did call the BAPI_ALM_ORDER_MAINTAIN but without using COMMIT since this function module is called in Update task method so whatever is the change being done by that BAPI will be reflected in the Service order once the Update task has been done for that service order.
Thanks and regards,
VIJAYB. -
Message no. IW056 Work center change -- default data redefined
Hi,
After EHP5 Upgrade. I am getting Message no. IW056 Work center change --> default data redefined during Maintenance Order Change (IW32). Please suggest me Is their any SAP Note or any Configuration setting to fix it.
Regards
Maheboob
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics
Edited by: Paul Meehan on Oct 25, 2011 11:56 AMHi Maheboob
Im glad the note worked -
To find the note , you could do a note search on the message IW056 you received and the support pack level you are on ..
For EHP5 the note is valid up to SAPKH60504.
The IW056 is listed as a keyword so if you search on it the note should be returned.
Thanks-
Enda. -
Work Center Changes need data for previous and new work center
Hi All,
I have a requirement as the organisation is going through RESTRUCTURING. In ECC in Plant Maintainance they are changing Work Center. E.G.
Work Center OLD : ABC
Work Center NEW : XYZ
Now the requirement is I have data for ABC already coming in BI Prod. Env. Now when they will change ABC to XYZ the new data will come for XYZ.
Reporting Reqmt:
Data In Cube
Work Center No. of Maintainence Orders
ABC 10
XYZ 20
When user run the report it should and gives input in Work Center variable as " XYZ" then
XYZ -- 30
Presently it is showing
ABC --10
XYZ --20
They have list of OLD Work Center mapping to NEW Work Center.
Now, Can anyone tell me is it possible to achive this scenario.
Thanks,
MayankHi,
find the below link it has similar issue ,
Re: mapping between old/new material codes in BW
Regards,
Satya -
Hi,
Our requirement is we need to change the Workcenter during confirmation of order in IW41.In IW41,WC field seems non-editable.How to make it editable and is there is any other impact of doing this change.
Regards
SB.hi ,
planned costs are calculated based on activity type in one WC and confirmation should be from the same for calculation of actual costs .. if the work if performed by another work center better change in Work order .. or look for BAPI ..
regards
pushpa -
CR10----WORK CENTER CHANGE DOCUMENT PROBLEM
HI FRIENDS,
CR10 SHOWS U THE CHANGE DOCUMENT FOR WORK CENTER.
I HAVE ALREADY TICKED THE CHECK BOXES IN OP40 TO REFLECT CHANGES MADE IN WORKCENTER TO THE DOCUMENT SHOWN IN CR10.
NOW MY PROBLEM IS WHEN I M CHANGING DATA IN ANY FIELD IN WORKCENTER ITS NOT GETTING REFLECTED IN CR10.
THE DATA IS GETTING REFLECTED ONLY WHEN I CHANGE RULE FOR STANDARD VALUE MAINTENANCE. (FIELD NAME-----VGMXX).
WHAT SHOULD I DO SO THAT DATA WILL REFLECT IN CR10 WHEN I CHANGE ANY FIELD IN WORK CENTER.
PLEASE GUIDE........Dear Nitin,
Sorry for thge late reply.
Please follow the link below.
http://help.sap.com/saphelp_47x200/helpdata/en/b1/c0384f439a11d189410000e829fbbd/frameset.htm
You can do this with the help of ABAPPERS.
Regards
Kannan
Reward if useful. -
Work center change during MFBF
Hi,
In REM scenario, During backflush, i am replacing workcenter while posting actual activities.
In which report can I check quantities confirmed with new work center.
Regards,
WadajkarMangalraj,
I checked MCP7, Its not showing any entry. If i check with MCP6, system shows quantities confirmed on different workcenter than planned. However, field of new workcenter name and description is blank.
Regards,
Wadajkar
Edited by: wadajkar on Sep 22, 2011 1:29 PM -
CR10 transaction - Work Center Change Documents
Hi Expers,
I am doing a test for our customer now and I am stuck with one test.
That is to test transaction CR10.
I can't make him to bring any result!
As I understand, it should bring me the changes, made to Resources or work centers.
I am creating work centers, using crc1 or cr01, then I do some changes the them and try to view the changes history using cr10. No result. it just stays on it's initial screen.
I enter only plant and resource name.
Can anyone give me an advice how to make it work?
Thanks in advance,
ArtashesIn OP40 tick the change document tick box for WC catagory
Now create work centre with that catogary...system will give the change document. -
TRX CR10- work center change documents
I need to get a report which can show me all the change logs by workcenter. I found trx CR10 in the menu path, but I don't get any output, it does not appear to work at all. Is any one familiar with the trx? and how to make it work?
Thanks
Edited by: Dunkin on Jun 26, 2009 6:04 PM
Edited by: Dunkin on Jun 26, 2009 6:05 PMIn OP40 tick the change document tick box for WC catagory
Now create work centre with that catogary...system will give the change document. -
Bapi for change work center data
HIi All
I need BAPI to change work center data for all categories and work center change transactions .....IR02 ,CNR2,CR02.
Thanks in advance .Hai,
Try the fm CRAP_WORKCENTER_CREATE
BAPI_BUS2054_CHANGE_MULTI
CRAP_WORKCENTER_CREATE
Regards,
Venkat -
Change log for work center data
Hi,
I was looking for the table where the change header document for the work center is stored.I was able to find a transation CR10 which shows the changes and also the database table CDHRD.
When I am trying to view the changes that were made to the work center I find that the data does not exist in the tables.
I was curious to know this as for some transaction the data is being logged in their respective change table but not for Work Center changes.
Can anyone tell me as to why this is happening.
What I think is that some changes to the configuration are required in order to log the changes in the database.
Kindly help.
Regards
VarunHi Wolfgang,
Thanks for the information.
However i have another question.
The change table will have data only when it is activated in the configuration menu.
However is there any other way by which we can capture the previous data for the work center e.g. the changed by field. I want that the names of the users who has changed the wrok center currently and the name of the person who previously made changes to it.
See if you can help me on that.
Regards
Varun -
Work Center(Capacity Level) Change Documents
We have a requirement to capture work center change documents at the capacity level which I understand is not supported by standard SAP; note 352485(point 15). Is there, though, a customized solution that can be developed? Any thoughts would be greatly appreciated.
Thank you in advance.Hi Usman,
I have already tested the method you are mentioning. You cannot save a order without work center. So, you need to use a dummy work center and change all the open orders.. if you want to change capacity category from A to B. New capacity category should be mentioned in dummy or original work center.
When you replace the work center, order will be gng for scheduling.. which leads to change of Basis start date and earliest start date... this is an inconsistency...
To avoid it... i followed below steps
1. Uncheck the capacity requirement indicator in all open orders
2. when u try to delete, it will say "Capacity is still being used"
3. Table KBED, use capacity ID and run, it will list out the pending orders
4. When the table has no entries, delete the capacity category
5. check all capacity indicator
- Pithan -
Regarding work center configuration.
Hi PP Gurus,
We need to take an account to Rated Line Speed (Bottles per minute) (i.e. It should be the current capacity of the bottling line operating at the full rated speed, irrespective of the bottling format).
We're using Discrete Manufacturing scenario and work center (CR01). How could it be taken into account.
Is there any alternte way to put an additional fiueld in work center create (CR01)/work center change (CR02) transaction code?
Thanks & Regards,
Abu Arbab
Edited by: abu arbaba on Jan 30, 2009 9:46 AMhi,
What I mentioned is , create a reference operation set of one operation with that particular work center and maintain operation times as the speed of that line ( 100 bottles for minute should be entered as base qty as 100 and time as 1 min). Call this reference operation set in any routings that uses this line.
If you do this, you don't need additional field in work center and so don't get confused with it.
cheers
Rav -
how we configure the shifts in work center. please describe the whole procedure.
thanks in advanceDear,
You need to define a shift in OP4A - define new grouping
click on New entries...let us say 99, give some text
Select 99 and double click on shift definition
click on new entry
shift - 1, text - first shift, start date-010108, end date - 31129999, start=07:00:00, finish-15:00:00
shift - 2, text - second shift, start date-010108, end date - 31129999, start=15:00:00, finish-23:00:00
shift - 3, text -Generalshift, start date-010108, end date - 31129999, start=08:30:00, finish-16:30:00
Double click on shift Sequence
Seq-1shift-1,des-shift-1,day1-1,day2-1,day3-1,day4-1,day5-1,day6-1,day7-1
Seq-1shift-2,des-shift-2,day1-2,day2-2,day3-2,day4-2,day5-2,day6-2,day7-2
Seq-1shift-3,des-shift-3,day1-3,day2-3,day3-3,day4-3,day5-3.(hope only 5 days working for General shift)
save this.
In work center change transaction capacity view
assign this grouping no 99.
Enter active version = 1
Click on interval and shift push button (left top)
follow the menu path Edit>insert>insert interval
enter valid from and valid from field enter shift sequence and remove the data if there in any other filed and click on ENTER. all the days in week are defaulted with the shift seq you defined.
Hope it is clear, or come back
Please check this link also,
[Shift Sequence|https://forums.sdn.sap.com/click.jspa?searchID=16735253&messageID=3810730]
Regards,
R.Brahmankar -
Changing operations work center during creation of PM order
Hi all,
I am looking for BADI or EXIT in order to change operationS work center which created from maintenance calls.
Does anyone know such possibility?
AssafAssaf,
Have a look at BADI IWO1_TL_INTEGRATION2.
Also see [OSS Note 925072|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=925072]
Which system are you running?
PeteA
Maybe you are looking for
-
I am creating a page with a list of Vimeo video links. I want to have only one video frame on the page. So no matter which video link a user clicks on, the chosen video needs to play in that one video frame on the page. How do I do this in Muse? Than
-
Hi, I'm working on a Flash presentation, and I have a lot of text pages with buttons and movie clips on. The problem I have is that all subheads are set to size 35pt using Helvetica Neue Heavy, but on a couple of the pages a random subhead is display
-
Please, please, please release the iPhone to Sprint. Will it ever be?
Will Apple ever release the iphone to Sprint. We deserve the opportunity to have the best on the market.
-
Hi all! I will be getting a Zen Touch a few days from now but I have a few questions. .) Can I have the Zen hooked up to my PC via USB transfering music and have it plugged into a power outlet at the same time? The reason I ask this is because I have
-
Silly question regarding sol 8 containers and disk sizes
I've got what is probably just about the silliest question, but I can't seem to find an answer whilst searching around for the past couple of hours. Say I have 2 boxen, one is a sol 8 server and the other is a brand new install of sol 10/8. They have