Work center - Connectivity Monitoring

Hi All,
I've installed EHP1 and now trying to configure the work centers.
Connectivity Monitoring - I would like to get an alert when
an rfc connection is down but I didn't find a place where I set it.
Also, there is no explanation in the help article about alerting in the "connectivity monitoring".
Any idea ?
Please advice,
Dimitry Haritonov

hello,
perhaps I don't understand teh question, but does this resolve your problem?
SOLMAN_WORKCENTER --> System Monitoring --> Connectivity Monitoring --> GO to setup to add your systems/RFC's
My Home --> System Monitoring --> Connectivity Monitoring (Broken Connections)
Use Asynchronous Refreh Settings to regulary update the screen.
kind regards,
Will

Similar Messages

  • System monitoring work center and CEN system

    Hi everybody.
    I'm setting up the central monitoring, using SSM as monitoring system. I'm also having a look at the work center for system monitoring; but I don't find how to link the central monitoring capabilities with this dashboard.
    I mean, it looks the central monitoring does not provide any advantage to work with this work center, am I right? Anyone has experienced this?
    Thanks for your answers!!
    Fermí

    Hi!
    I've done finished this issue!
    Please follow steps below:
    1. Create activity type in T-Code: KL01
    2. Go to KP26 to create the realtionship between Cost Center and Activity.
    Now you can see new activity in Costing tab.
    Regards!
    Woody.

  • How to connect MAPL and PLPO to derive work center for planned order

    Hi,
    Anybody know how to derive work center using MAPL and PLPO for planned order (PLAF). Is there any connecting table between MAPL and PLPO.
    Please help asap.
    Regards,
    Mitali

    I guess u r trying to view the detail scheduling info (tab in MD13) for a planned order . In that case -
    1. Go to PLAF and enter the planned order number. (PLAF-PLNUM) and get the ID of the capacity requirements record (PLAF-BEDID).
    2. With this PLAF-BEDID go to KBED. pass the value here. KBED-BEDID. The KBED-ARBID values are your work center ID.
    3. To get the work center texts ( the way is appears in the screen) - Pass this value to CRHD . CRHD-OBJTY = 'A' ( i.e Type work center) and CRHD-OBJID = KBED-ARBID.
    Hope it solves ur prob.
    Cheers
    SKC

  • Firefox do not work on a monitor connected via HP USB docking station

    Firefox 4 doesn't work on a monitor connected to a HP Docking Station USB 2.0 (AY052AA#AC3). The latest Firefox 3.6 (or is it 3.7) worked perfectly on that monitor (except for Adobe flash player). I usually have that monitor in portrait mode, but neither does it work in landscape mode. I have no problem on the native display on my HP Pavilion dv7-3070ez or on the external display connected directly to the laptop.
    The picture displayed freeze with the content of Firefox 4.0 when moved into the USB connected display from another display. When moved back to one of the 2 other displays, operation returns to normal.

    I  have lost complete functionality of my Kensington Displaylink Adaptor.  It worked just fine on my iMac with Snow Leopard, but does not work with Lion.  I have one screen connected through the display port on the back of the iMac and a second connected through the Kensington DisplayLink.  No signal gets to my monitor from the dispaly link.
    I called Kensington yesterday, and the tech surpirsed to hear that Lion was now available for sale.  The tech said that they should have a new driver out in the next two weeks, but he did not inspire confidence.
    danburdi, I see that you found a Lion driver.  Could you share the link?
    Thanks.

  • Set up of System Monitoring with SPS 15 only through "Work center"

    Hi!
    We use SAP Solution Manager SPS 15 and would like to set up System Monitoring function in order to monitor satellite systems.
    Is is only possible as of SPS 15 with tcode "solman_workcenter"?
    I have heared as of SPS 15 the tcode "dswp" provides only Display view...
    Thank you very much!
    regards
    H. Thomasson

    Hello
    Is is only possible as of SPS 15 with tcode "solman_workcenter"?
    --> If you want to configure Solution Monitoring, you can follow rkt in service market place. With SP15, SAP has given additional functionality to access solutions or projects through work centers. Now its up to you to use this functionality or you can directly go to solution_manager or DSWP to configure, doesnt matter.
    I have heared as of SPS 15 the tcode "dswp" provides only Display view...
    --> Have you tried? Its not Display, either way through work center you are going to access the same transaction. Please check.
    Thanks
    Sharmishtha

  • Solution monitoring through Work Center

    Is it possible to do transaction DSWP -> Solution Monitoring  >System
    monitoring tasks in transaction solman_workcenter? If so, how can I
    import my current system monitoring tasks into my assigned work center?

    Is it possible to do transaction DSWP -> Solution Monitoring  >System
    monitoring tasks in transaction solman_workcenter? If so, how can I
    import my current system monitoring tasks into my assigned work center?

  • Connection between work center and ppome

    Hi,
    in the work center I defined the connection to a o-unit in ppome. Which table represents the connection between the org-management and the work center?
    Thank you,
      Vanessa

    Hi Roman,
    thanks for your answer. I don't have evaluation path PPDM (and if it is a t-code I don't have the right to use it).
    I have seen that there are different kinds of work center. I am talking about the one created with the cnr1 transaction.
    Greetings

  • Mac only works with 2 monitors connected

    My mac pro OSX 10.7.5 briefly had a second monitor connected via a dvi to mini adaptor. My main screen is connected via dvi. I now want to remove the second monitor but when I do, my main screen remains black; it only works if both monitors are connected. I have tried rebooting, switching display ports, rebooting with no displays, the rebooting again, switching mirroring on and off, but nothing seems to work. The second monitor does not even need a power source - it seems that the graphics card (ATI Radeon HD 5770 1024 MB) is stuck in dual display mode. I have also removed the com.apple.windowserver.plist from preferences, but no joy. Any ideas?
    Cheers,
    Mark.

    My guess is your setup is wrong. On my 5.1 system, I get sound from all the speakers, including the rear ones.
    Open the Quicktime control panel, and click the Audio tab. Make sure the "Channels" pulldown matches your current speaker setup.
    Also, in the "Sounds and Audio Devices" control panel, on the "Volume" tab, click the "Advanced" button under "Speaker Settings". Make sure the Speaker setup pulldown matches your current speaker setup.

  • Can iMac act like a target display? Can we connect a PC/MAC to iMac and can it just work like a monitor.

    Can iMac act like a target display? Can we connect a PC/MAC to iMac and can it just work like a monitor.

    It depends.

  • My mac pro suddenly stops working (2011), connection to the monitor stops, but de tiny light on computer still on and all sound stops. what's the problem?

    my mac pro suddenly stops working (2011), connection to the monitor stops, but de tiny light on computer still on and all sound stops. what's the problem?

    When the display turns off, it is not clear whether the computer has halted, or whether the display subsystem has failed.
    Those tests determine whether:
    a) Your Mac software had stopped working  OR
    b) Only the display had stopped working
    If the pressing the Caps lock light on the keyboard lights the Caps Lock light on the keyboard, some software is still running -- your Mac has not halted.
    If pressing Control-Eject on the keyboard, followed by the Return key shuts down your Mac, the software was still running.
    ¿Software was still running?
    --Yes, the problem is ONLY in the display subsystem
    --No, this is a computer-wide problem such as a kernel panic

  • HT4951 Can i use a Thunder bolt display with an iMac from the mid 2009 ? Would it work if connected to a mini dvi port in a scaled down mode or is it compulsory to have a thunder bolt port ?

    I have a mid 2009 iMac that doesn't have Thunderbolt display, but has a mini-dvi port.
    Will the Thunderbolt cinema display 27" still work when connected to this mini-dvi port ?
    I thought it would be better going for a thunderbolt display monitor rather than the older version, so when i upgrade my machine in the future it stays compatible.

    I have a mid 2009 iMac that doesn't have Thunderbolt display, but has a mini-dvi port.
    Will the Thunderbolt cinema display 27" still work when connected to this mini-dvi port ?
    No.  A TB display can only be connected to a TB source. 
    Confusing Mini DisplayPort with Thunderbolt
    As indicated in that artical a displayport device can be connected to a TB source.  But that is not your situation.

  • Urgent  ! Help in linking Work center to goods movement

    hello,
    i need help in finding the work center for the goods movement in AUFM.  The goods movement AUFM table shows all the goods movement entries but i want to tag it to the corresponding work center. i found out a way to tag it. by linking AFKO - RESB - AFVC - CHRD. But the problem is that if the material on the production order is the material that is finally produced, i cant find a work center for it. Because this material has no entry in the RESB table.
    Any suggestion would be highly appreciated.
    hey everyone
    is there a way to have the VORNR field connected to the AUFM goods movement. this will solve the problem of linking the work center . So if someone knows how to link the AUFM entries with the respective VORNR activity ? Please give suggestions.
    thanks
    Laura.
    Message was edited by: Laura. 3:20 PM
            laura s

    Laura,
    Goods issues are linked as you described because components consumed by a production order have reservations (RESB) and are assigned to an operation (AFVC).  Goods receipts, on the other hand, do not have reservations and therefore don't have this link to the work center.
    If you are using automatic goods receipt, then one of the operations in the production order will have a control key set up for automated goods receipt (PP03 is the standard, and it's usually the last operation).  The business would likely see this work center as being logically tied to the goods receipt of the produced material.

  • How to work on external monitor with lid closed?

    I have an external monitor connected to my MB Pro and would like to work with the lid closed. When I shut it, the monitor also goes to sleep. Yesterday I did something right and the monitor woke but I was able to keep the computer closed. Today it's not working. I use a wireless keyboard that also goes to sleep when the lid closes.
    What's the procedure to keep the monitor awake while the laptop is closed?
    System 10.6.8

    Yes, I have done that and tried it over and over and it still won't work. The monitor went on for a few seconds and then went black again.
    Is it possible to do this with a wireless keyboard? I do press the power key to try to wake to keyboard but nothing happens.

  • How to link Cost center and Work center?

    Hi All,
    We have a list of Work centers and the corresponding Cost centers. We need to know which tables can be used to connect the Work center with its corresponding cost center?
    Thanks:
    Siddharth

    Hi Please use t-code OP42. Make sure all your configuration for work centre is there. You link cost centre in the costing tab of work centre basic data.
    Hope this helps.
    Thanks
    Sanjeev

  • Read Routing and work center details from transfer order

    Hello
    I am using transaction LT31 to print a form for the transfer order.
    The customer wants me to print a field that is in the work center details of the routing for this material and plant.
    I can see this data with transaction CA02 where i enter material and plant,and then the work centers are beeing displayed.From here i can double click on the work center and see the field Supply area that i have to print.
    My answer now is,how to read details on the work center starting from my transfer order number.Which is the table connection between transfer order table LTAK and the tables where i can find the work center details.
    Thank you

    I have found the solution:
    ltak-tanum = mseg-tbnum
    read aufnr from mseg and go to afko
    mseg-aufnr = afko-aufnr
    read plnnr from afko and go to plpo
    afko-plnnr = plpo-plnnr
    from plpo read arbid and go to crhd
    plpo-arbid = crhd-objid
    from here,we can find the arbpl and the field that i was looking for PRVBE

Maybe you are looking for