Work center costing tab

Hi,
Is there any user exit or FM to restrict users entering wrong cost center information, so that it triggers error while saving.
Thanks in advance.

Dear Sprint,
1.I will suggest you to make all the cost center,activity type fields mandatory for the cost center tab of the work center for work
center category 0001 or as per your business in OPFA.
2.In this case only for the activity type and cost center combination for which the rates are defined in the system using KP26 will
allow you to save the data of the work center.
3.By this atleast only for the cost centers for which rates are defined for the mentioned activity types will be allowed to save.
4.In my understanding the system checks only this assignment,check whether this can help you.
Regards
S Mangalraj

Similar Messages

Urgent....work-center/cost center table...have ur point.s

Hi all,
I have work-center, I want to find the corresponding cost-center.
But on screen i m getting structure CRKEYK.
Please let me know the table...
Urgent.
<b>Help me ....n have ur points.</b>
regards,

Hi Pradeep,
AFRV is the table which will have both work center & cost center.
<b>Reward points if it helps,</b>
Satish

Work Center & Cost Center

Hello,
If I make one cost center in SAP and I have four work centers. So can I assign all the Work Centers to the single Cost Center I created earlier
Or
I have to make Separate Cost Center for each of my work Centers???
Regards,
Piyush

Hi Piyush,
For Eg: There are three work center W1,W2 & W3.
There are two cost center 5250, 5350
In the costing tab page of the workcenter (CR01/CR02) we can assign the cost center.
i.e. cost center 5250 can be assigned to W1, W2 & W3.
But For one work center i.e. W1 cost centers 5250 & 5350 both cannot be assigned. i.e. One work center can be assigned only one cost center.
Hope this helps,
Regards,
Senthilkumar

Work center planned cost calculation- PM related

i have created a work center with t-code ir01, used in Maintenance order under operations tab. In cost tab, it is not showing Planned costs of the pm order. Please advise what are check ups or config settings should be done? Thanks.

hi
first kindly check whtether you have defined value categories, grouped the calue value categories then specified the defualt values categories for order,
then plan for activity type and cost center specified in workcenter in KP26,
also check whether you have specified the formula in the work center costing tab page
regards
thyagarajan

Link for Cost Center And Work Center.

Dear Experts,
Can you Provide me the Link for Cost Center And Work Center.
Regads,
Jyoshna

Dear Experts,
I got the answer for the Link Between Cost Center And Work Center.
By using CR03 T Code we can see the Display Work Center : Cost Center Assignment Screen will appear.
we need to select the costing tab, We can find Cost Center .
Thanks & Regards
Jyoshna

Reg: Combined work center / Capacity requirement planning .

Hi,
i need few informations regarding work center.
1. Can we create Resource (for process industry) similar to that as Work center which we create for (discreate industry)
can i use the workcenters (CR01) instead of Resource(CRC1) to my master recipe. is there any impact by using workcenter instead of resource to master recipe..?
2 In foundry we are using some Iron Plates for resting of Moulds. And these Plates we are having in limited numbers in Foundry.
Arond 30 Now i want to create a resource for this..? How to consider this Plates for resource..? Whether M/C or what..?
We are planning to carry out Proper scheduling and capacity planning for this resource.
3. And May i know how to carry out Proper scheduling and capacity planning of resource.. So if capacity is not available ,i should be not able to go-head even with the releasing of order. How to carry out this. Is any customization required.
4. Can we create combined resource Ex: Crane and laddle.
I need to create these two resource has single resource ..is it possible..? may i know how the costs/ time to capture.?
Please let me know.......THANK U IN ADVANCE.
Edited by: dan01234 on Dec 30, 2010 6:21 AM

Dear
Frist of all , I would appreacite if you can create seperate theard as you have multiple question .Refer : http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement
However , please find the answers :
1.. Can we create Resource (for process industry) similar to that as Work center which we create for (discreate industry)
can i use the workcenters (CR01) instead of Resource(CRC1) to my master recipe. is there any impact by using workcenter instead of resource to master recipe..?
Yes you can with Usage Type 009.But there may be diffienece in Standard Value Key and Formula Key which will be used for calcuating activity and also Capacity Reuiqemenet .
.2 In foundry we are using some Iron Plates for resting of Moulds. And these Plates we are having in limited numbers in Foundry.Arond 30 Now i want to create a resource for this..? How to consider this Plates for resource..? Whether M/C or what..? We are planning to carry out Proper scheduling and capacity planning for this resource.
A resource is plance where certain operation will happend sequentially as per Master Recipe or Routing .If you have Plate where you carry our certain engineering optiaon rather utlising thoem at requorce to excute the opration , then you can very well create them as resource or work centre .This Resource /Work centre will be having optaion , material , scheuling , CRP etc .Do u think that u will doing the same for Plate ??
If you are interested to carry out CRP/Scheduling the refer this theard : Capacity Leveling of Work Center
4. Can we create combined resource Ex: Crane and laddle.I need to create these two resource has single resource ..is it possible..? may i know how the costs/ time to capture.? :
Yes you can if both of them are intregal part of the resource /work centre as per as Setup , Machine , labour hrs is concern based on selection of Standard value Key and Formula Key .Wor centre or Reosurce cost captured through Actvity type ( KP26 with fixed or variable rate aginst costing elenemts) and Formula Key as assinged in the reosurce or work centre -Costing tab .
Check and revert
Regards
JH

How to manage work center in Production order

Hi,
I am producing a material having one operation (suppose cutting), which I have mentioned in the routing. I have also mentioned the work center in routing on which cutting operation will be performed. When I make the Production order of 1000 pcs there comes only one work center. But practically, they are producing these 1000 pcs on two different work centers ( 500 on one and 500 on second). How to manage this in SAP.
Kindly help me.
Thanks and Regards,
Yogesh Singla

Dear ,
What is the individual capacacity of the Work Centre -CR02-Header -No of Individual Capacity ?
I think you must be using similar kind of work centre of 2 no 1000 pc .Now , when you are creating routing for this , you should hit Required Spilliting in Routing Operation -Select Operation line item and then Double click -Select Spilitting and enter splitting No 2.
At the same time in CR02-Work Center -Capacity Tab -Hit the Header -In the Bottom of the Detail Capacity Header -Avaialabile Capacity -Include 2 as Number of Inidvidaul Capacity and SAVE.
Now based on thr required spilittinga and invidual caapcity , it will consider the Work Centre Load .
Other wise , you can enter one more operation line in routing with similar Labor hrs , work center and control key in routung for production of 1000 pc .
Hope it clarifies
Regards
JH

Cost tab

Hi,
In sap e-recruitment ehp4 version we are using.....
In Request ion screen after that job posting tab stip we have to create one custom Tab for costing.
In this page we create a cost view. so can u help me some one which info type we have to use .
how to use
Thanks in Advance
Patrick

hi
where are you finding this problem if it is in maintenance order kindly check the following parameter
PM/CS Order (IW33):
Check the order control tab to see if there are entries in the CstgVariantPlan and CstgVariantActl fields
Check the CO data via the report planned/actual button on the cost tab
Check you are getting planned costs for labour, materials, PRs etc
Check the operation control key settings
No cost management is provided for sales document (contract) item: This is usually because there is no requirements type assigned to the contract item (see procurement tab). The standard value is SE.
Work Centres:
Costing tab: Check cost centre assigned
Costing tab: Check activity type assigned
Costing tab: Check formula (standard is SAP008)
Costing tab: Check validity dates
Value Categories:
SPRO: Check your value category settings in the IMG (Settings for Display of Costs)
CO Configuration:
KL03: Check activity type validity dates
KA03: Check cost element validity dates
KA03: Check cost element category is 43
KA03: Check if Record qty flag is set on Indicators tab
KA03: Check cost element assigned to your controlling area
KP26: Check that activity type is linked to cost centre
KP26: Check that there is a rate for the activity type/cost centre for the relevant period(s)
KP26: Check are you using the correct version
regards
thyagarajan

Formulas in Work Center

Hi SAP Gurus...
When creating a Work Center, on tabs "Capacities" and "Scheduling", there are a lot of formulas.
I understand the objective of the formulas, and I know how to create new formulas and parameters in SPRO.
The only thing that I cannot do, is to see some results of the formulas calculation. It only makes a calculation when I run a test in Extras ® Formula ®Test.
Is this normal, or we can see the results of the formulas somewhere else?
My objective was to have the formulas working on the results of the tab "Operations" in the Maintenance Order.
Thanks in advance.

Hi
As per Pete Advice
TCODE : IW49N
Enter the Work Center and Execute
In the change Layout... select the actual time start, end, actual Work, Forcast Work...
It will display the Hours
- Pithan

Formula parameter in Work Center for 'Costing' tab

Hi all
In the 'costing' tab of the Work center I am using a formula which uses the operation quantity ' which has field name 'MGVRG'. Is there a way I can use an alternate unit of measure as an operation quanity in the formula? Let us say my Routing is defined in Cases and my operation qty is is in cases but I want to pass on the alternate unit of measure LB which is defined in the Material Master. Is there a way I can do it.
thanks a lot

Hi John,
Not sure if i have understood your query correctly, but when you click on test forumla in the work center it does not display the UoM, so here you can pass the UoM as per your need. In OP52, for SAP_09 you can verify the same.
If my understanding is not correct, please let me know.
Regards,
Vivek

How to link Cost center and Work center?

Hi All,
We have a list of Work centers and the corresponding Cost centers. We need to know which tables can be used to connect the Work center with its corresponding cost center?
Thanks:
Siddharth

Hi Please use t-code OP42. Make sure all your configuration for work centre is there. You link cost centre in the costing tab of work centre basic data.
Hope this helps.
Thanks
Sanjeev

Significance of defining the formula SAP008 in costing tab of wrk center

Why SAP008 is used in the costing tab of work center in defining the formula (used to determine the costs of activity type )?
What is its significance?As far as I know SAP008 (used for capacity planning and costing) is linked to SAP_07, which is Work
(field ARBEI) SAP004 (used for scheduling) is linked to SAP_010, which represents. Duration (field DAUNO).Suppose in a
particular operation duration is put as 10 hours and number of capacities as 2.Then how does sap calculate the work to be 20?
Where is this formula defined?

Hi,
In Task list or Maintenance Order operation, there will be a column called "Calculation Key". Those values are fixed & formulae are fixed. Based on that, this calcualtion would be done.
Based on that option, between work, duration & no. of capacity, if two values have been given, 3rd value will come automatically.
Also that values are not stored in table, thats stored as structure.
Regards,
Maheswaran.

PP costing Formula for work center

Hello Experts
I am having issue to set up formula for given below case,
I have on my work center three parameters, x time (unit: Hr) and   Y Power (unit:kw).
i want to multiply both the parameters and get the answer in terms of energy Z (unit: kwh) paramenter.
so i already define activity type unit with KWH.
for example:
From Routing:
work center: 1111,
x: 10
Y: 20
so Z= X*Y
       = 10hr * 20kw = 200kwh
So which would i apply formula for all 3 parameters to get result 200 kwh? Do i need to assign 3 different formula to X,Y,Z   or   1 formula direct to Z?
Sooner response highly appreciated
Thanks
Nixal

Dear Nixal,
Assume this 10 hours is for some base quantity and this value gets changed based on operation(order quantity) means,you can
check with standard SAP formula SAP006 = Machine * Operation quantity / Base qty.
In case if the duration 10 hours is for any operation quantity means,then there is no relation between base quantity and
operation,so you have to assign a formula which has only duration alone.
Likewise you can decide and select the suitable formula and use the formula key in the costing tab to calculate the cost based on
the formula selected.
Regards
Mangalraj.S

Costing in Work Center

Hi all,
I have a work center with an activity assigned. The cost of the activity has been maintained in KP26. E.g. 30 dollar /hour.
In the costing tab of the work center, i have added the activity and put in the formula SAP008.
When i do a calculation of the costing formula, i entered 1 day as the work duration.
The results for the calculation gives me 30*24 = 720. So it is giving me 1 day = 24 hours.
In the capacity tab, i have maintained the start, end and break time. Thus the operating time is 8 hours. Base of unit of measure is put as Days.
Any ideas where i would need to configure such that 1 day = 8 hours and the result of the calculation would be 30*8 =240?
Appreciate any advice.

Hi,
I think this 24 hours is not directly related to 1 day equivalant hours.The time is coming from the formula you have used SAP008.
Please create a formula which will take 24 hours as 8 hours for this resours.
For an example
Create a formuls x=SAP008/3
As 8 hours is availabe hours for your resource.The formula SAP008 use Work (internal proc) as a entry.Divide it by 3 by which you can get the actual run hours.
Hope this will help.
Regards,
kaushik

Default employee cost center based on work center

Greetings,
How can I default an employee's home cost center in IT0001 based on their work center assignment?
I've tried linking both the employee's position and their org unit to the work center via CR02. This did create the IT1001 records. The work center does have a corresponding HR work center. I've even tried attaching a cost center to the HR work center with the IT1001-A011 relationship. No luck.
Seems like OM side is doing what it should, but we want to get the work center's cost center in the costing tab over to the employee.
Maybe there's an integration switch that I'm missing somewhere?
Thank you!

Thank you both for your thoughts. We have tried the ZXPADU0x exits, but it appears that SAP will not allow us to change an existing cost center value in IT0001 via defaults. I think this is because SAP wants to always keep OM and PA in sync, based on the A011 relationships in IT1001 on the position or org unit.
In terms of OP42, yes, we have tried adding relationships between the work center and position/org unit and also employee. And also have the cost center linked to the work center on the costing tab. But we're still not able to get that cost center to pull into IT0001.
I'm wondering if the integration between work centers and HCM is limited to relationship links on the OM side?

Work center costing tab

Similar Messages

Maybe you are looking for