Work center creation in PP

Please guide me step by step procedure to create work center in PP module so that if i reference the same in Poduction order it will generate all costs (estimated, planned , actual costs).
Thanking you in advance.

Hi,
you can go to transaction CR 01 to create work center put plant work center name and then category of ur work center i.e. machine ,labour,production line
1. Basic data - general details of ur work center. -- category person responsible and with that standard value key with six parameters
2 default values -- put ur control key,and unit of measurement for ur parameters like min. hour ,second.
3. capacity - here you mention all the details of ur standard capacity details header details and capacity calculation formula
4. scheduling - here you mention ur scheduling formula and standard queue time
5. costing - here you put ur cost center and controlling area with validity period dates and activity types and formula for it
Then save.
reward points if you find it useful .
regards
pradeep

Similar Messages

Can we add additional fields in work center creation using any user exit ?

Hi,
is there any user exit using which we can have some tab and fields such that we can add/ update the equipment to wotk center in CR01 ?
regards,
madhu kiran

hi,
requirement is can i get the additional fields like equipment and asset in the work center creation ?
i would like to maintain these against a work center
and using any user exit can i add additional fields ?
regards,
madhu kiran

Customization Setting for Work center creation

Dear all,
What is the Customization Setting for Work center creation? How to do it?

Hi,
Here are the few things you can check
OP40 : WC category
OP17 : Formula for WC
Person responsible : Plant Maintenance and Customer Service >> Maintenance Plans, Work Centers, Task Lists and PRTs >>Work Centers >>Define Employees Responsible for Work Centers
apart from above You can explore more in
Plant Maintenance and Customer Service >> Maintenance Plans, Work Centers, Task Lists and PRTs >>Work Centers
Riyaj

Creation of person responsible in CR01 (work center creation)

Hi
During the creation of work center (CR01). The following details are entered before i get the error message
1) Work center and its description
2)Work center category
3)Usage
4)Backflush
5)Standard value key
But i am unable to enter the PERSON RESPONSIBLE field (Message is NO VALUES SELECTED MAINTAIN ENTRIES).... if I am selecting yes with this message it is routing me to Choose Customizing project.
Please help me creating person responsible field
Thanks in advance
Rupesh

Dear Rupesh,
press F4, then for maintain entries press yes
then enter on continue w/o specifying project
then it's take u to location
here double on any or PP work center
then new entries
and specify one name here
then back, back & back
now u can get the name here
ADDED
maintain directly in T-code OP10
here go for new entries
give ur plant & person name
this should solve ur query
Regards
kumar
Edited by: kumar kumar on Sep 5, 2009 9:37 AM

Work center creation

please tell me how to create work center required in calibration.
and when i am trying to do result recoeding second time for same lot.the result field is grey.so how can i do it again.
also in the inspection lot there is no equipment no.so how can i identify the loty is of which instrument no.?

Hi Sandip,
1. W/c category depends upon your reqmt. You can take Machine as a w/c category. Default values, and if reqd. scheduling , cap. details are the data to be fed.
2.If you want to take single result for no. of euipment, then select summarized result as control indcator. Else select single result.
If you want to record results once again after you`ve done rr, then select the characteristic in RR screen, and unlock it. Later you can again perform RR.
3. In QA32, Equipment no. cannot be viewed. It can be known from the Inspection Lot.
Reward if cleared and close the thread.

Cost Center Mandatory in Work center

Hi Experts,
How to make the Cost center field mandatory in Work center creation.
Regards,
Kavvya

Hi Experts,
I tried your solution but unable to get the solution.
Hi, Thyagrajan
I tried t-code OPFA but failed to get the result.
Hi Maheswaran,
I used t-code SW01 and use the object type given by you, but unable to get the result.Can you please explain little bit in detail how to use BUS0011.
Actually in my case while creating work center the cost center field is coming mandatory i want to remove the same.
Regards,
Kavvya

Capacity category in work center

Hi All,
please clarify me on this,
capacity category under scheduling tab in work center creation is showing as mandatory, but i do not want to maintain this field because iam not putting anything under capacity tab to avoid capacity planning.
is there anyway to take off it as mandatory under scheduling tab?

Dear Sprint,
Goto OPFA and select the scheduling and click on influencing and mention the work center category in the field contents and
press enter and for the field capacity select the radio button for input or else display (remove it from the radio button mentioned
under required) and press enter and then save the data and now create a new work center for the changes made work
center category and revert back.
Regards
S Mangalraj

Performance work center

Hi all,
Please help regarding Performance work center creation and it's advantages etc and it's path.And what r the differences between main work center and performance work center?
thanks and regards
N.Nagaraju

Hi,
In OPFA, check the influencing factor there may be based on workcenter category they made efficiency rate as mandatory.
Go to OPFA,click on basic data-then click on influencing,there you will get the contents field.take work cenetr category and check for efficiency rate whether it is mandatory or not.
like this check for other influencing factors also
hope it helps

Creation of work center CR01 (error message in last page)

Hi
During creation of work center .After all the configuration being done ,in the last page the error message displayed is (ACTIVITY SET CAN NOT BE ALLOCATED TO 2009).
Some of the major setting done in the last page is
This is Costing Lab
1) work Center
2)Activity description (Like set up, Machine and Labouring)
3)Selection of activity type
4)Preferred Unit
Per
After this when i save the error message is displayed mentioned above (Message number is KL008)
Please help ....!!!!!
Thanks in advance
Rupesh Jha

Dear Rupesh,
1. Please enter the CCtr categories value as "*" in the basic data tab.
1)in KL02 for this particular activity type give as *
2. Enter ATyp category field value ar "1" in the basic data tab.
2) in the field A type mainatin -1
3. Actl Acty Type Cat field value as "As in planning".
in this field also mainatin as 1
YOU MUST SPECIFY A COST ELEMENT FOR ACTIVITY CAT 1
first creat a cost element in KA01 (pramairy) & in KA06 (secondry)
then asiign in KL02 for the required activity types
Regards
kumar

Regarding work center master creation In PP

Hi Iam Kiran working on routings and work centers creation.I want to know how the formulaes are derived for caluculating capacities,shedulling,Costing.where can I find study material regarding formulae derivation.For the above mentioned.Please respond if your having any material with respect to this content.

Hi Kiran,
Please use the following transaction to create/check the parameters & formulas,
OP17 - Create formula parameter
OP19 - Maintain standard value key. (The parameters created are entered in this standard value key & this std value key is used in the work center (CR03) basic data tab page)
OP21 - Create Formulas
These formulas are assigned in the capacity, scheduling & costing tab page in the workcenter.
This workcenter is assigned to an operation in the routing (CA03).
Regards,
Senthilkumar

Customizing message creation in work center

Hi all,
we have to change the layout of the message creation window in work center (Web Dynpro Component: AGS_WORK_INCIDENT_CREATE)
I've tested the enhancment functionality quite a bit, but i was not able to solve the problem.
Basically we have to add fields to the layout which correspond to the fields in the support message that should be created.
Example: The support message (ZLFN) contains a field "approver". This field has to be on the screen when creating a message and the value should transported into the created message.
Can you please tell me the basic points of how to do that.
Another way i thought about was linking direct to the blank ZLFN message (coressponding to crmd_order), but i could not find a way to do that. Maybe this is possible?
Any help would be really appreciated.
Best Regards
Daniel

Hello Daniel,
Please, check the following link:
https://websmp105.sap-ag.de/~sapidb/011000358700000601362009E/WORKCENTERCUSTGUIDEVALE_EX.PDF
I hope that this link can help you.
Best Regards,
Diego Fischer,

Changing operations work center during creation of PM order

Hi all,
I am looking for BADI or EXIT in order to change operationS work center which created from maintenance calls.
Does anyone know such possibility?
Assaf

Assaf,
Have a look at BADI IWO1_TL_INTEGRATION2.
Also see [OSS Note 925072|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=925072]
Which system are you running?
PeteA

Some error in creation of Work Center

Dear Experts,
After completely creating the project, I tried to check the chart for scheduling, but to my surprise no dates were appearing and the scheduling chart was also not proper. After lots of permutation and combinations I realised that the work center(RENOV) that I created had some effect(or difference) that the dates and duration was not getting picked up from the internal activity tab on project builder(CJ20N) screen.
Hence I created a new Work Center (Ren1), which was just a copy of another working Work Center. When I used this work center along with my existing activity (ABCD) I could see the duration appearing in the dates tab and my project could also show proper schedule lines.
I did side by side comparison of the RENOV and REN1, apparently they are alike in appearance. I am curious to know what could be the reason for this anomaly.
Thanks
Manish

Hi,
Did you check the on the Costing tab, whether Validity period of the Cost Center is correctly showing.
Thanks
Dasa

Automatic creation of work center per new employee

Dear gurus,
Is it possible to instantly create Work Centers every time an employee is hired and created via HR module? We consider an employee as "created" when infotypes 0000-0002 are accomplished.
Work centers in PS are manually done in CNR1.
The reason for this integration is that the Work Center needs data from HR's personnel master data such as: name and cost center. And it will be tedious to manually create work centers every time a new employee is hired.
We are thinking this will be done via an ABAP batch input program which just automates the two transactions (PA40 and CNR1). However is there a simpler way to do this? For example, a SAP standard method that we're not seeing?
Thank you!
Regards,
Mozart

HI,
I think it can be handled in the following manner
Use Dynamic Action to call a Cutsom Routine which will inturn do all the actions required. Take Abaper help ..

Automatic creation of work center

Hi gurus,
Is it possible to instantly create work centers every time an employee is hired and created via HR module?
We would like to link the work center per employee. The ratio is 1:1. 1 work center per employee.
We are thinking this will be done via ABAP, although do you think this is possible as a SAP standard?
Thank you!
Regards,
Mozart

Hi Mozart,
Maintain Relationship and check the same is flowing in table HRP1001, you can do that in transaction PP01.
It depends on Org data, infotype. least not last it can be possible through ABAP.
Check with you HR consultant about this and post the same question in HR forum.
Regards'
Syed

Work center creation in PP

Similar Messages

Maybe you are looking for