Work center default values
Hi,
When I create a work center, in capacity header data, 'long term planning' checkbox is ticked by default. How to remove this default setting?
Regards,
Yogesh
Dear,
Go to OP36 enter your plant and Capacity category say 001 go in details and remove it. Then create new work center and check.
Similar Messages
-
Where can i find Main work center field value in il03 transaction ??
Hi experts,
Where can i find <b>Main work center</b> field value in il03 transaction.
Iam looking for the table from where that value will be filled.
thanks
SureshHi anji reddy,
No that filed is not avaiable in that . can please tell some other soulution ...
ASAP...
thanks,
Suresh -
Additional Cost Center Default value
Hello Experts,
I have one problem..when I want to book incoming invoice using FB01,
The system pics up the cost center XXXX automatically. And that is the mystery at the moment.
Why it is Default cost center XXXX ? There are some other cost centers which are linked to business area YYYY.
I have already checked tcodes : OKB9, KA03, KA02, GGB1, GGB4.
in above tcodes cost center is not defined.
Please guide me How to solve this problem.
Thanks in advance.
Regards,
SujeetPlease check also CO substitution (OKC9).
-
All default routing value has to be changed, while changed the work center in production order
Dear friends,
our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routing.At present we have to enter the manually change the W.C as well as set up time and operation time enter manually.Any other option to do the automatically capture value from routing while change in Work center in production order.pl help me on this.
Thanks&Regards
Sabhapathy RHi Rahul,
Thanks for reply. I am maintained in diff value maintained routing , Ex :First routing i have work center 'X' value maintained as a setup time in 15 Min's and operation time 10 Min's
second work center 'Y' I have maintained as set up time 10 Min's and operation time 30 Min's,
Now I want to change the work center in production order as a 'Y' so whatever value maintained in routing , it has to be changed automatically (10 min's and 30 Min's), but system will not change only old value only picked (15Min's AND 10 Min's).
Now I think you get to know what the client requirement, kindly do the need full.
Regards,
Sabhapathy R -
How can I use a query or custom function to retrieve a forgein key field to be the default value of a field. Also, the types are different. Here is my example:
table: addresses
address varchar2(100);
city varchar2(30);
state number(10);
table: states
id number(10);
description varchar2(50);
I want to create a form on table ADDRESSES and have the state not a list of values, but a read only field that displays the contents of the description field of STATES. How can I do this? I have tried to work with default value but don't know how to reference the STATE value in a query in the default value textbox and when I get any value (select 'OK' from dual), it complains that it cannot convert 'OK' to a number.
Any thoughts? Thanks in advance.Please give some Information as how are you planning to get the description for the field as when you will open the form based on address table ,which description (I mean for which state) you wish to get,as there will be no way to find the address in a fresh form.
-
Hi, I am using SQL Server 2008 R2 database & SSDT (Visual Studio 2012) to develop reports. I am trying to modify an existing report after the upgrade and something seems not right especially with report parameter default values. I am using the expression
below and for the default value its always returning the false part. When I put this expression in a textbox to test results it works as expected. Thanks in advance.
=IIf(Parameters!Area.Value = "Test Area", "1", "2")
IoneHi Lone,
Per my understanding you are experiencing the issue that the report parameter’s default values not work, the default values for this parameter is using the expression based on another parameter, but now it not always display the correct value, right?
I have tested on my local environment and can reproduce the issue, the issue can be caused by you have not specified available values for this parameter base on their parent parameter(Area), so the parameters will not refresh when the value of the first
parameter has changed. In Reporting Services, if we want to create cascading parameters, we should specify both available values and defaults values for child parameters.
Please specify the Available values as below, using both the expression in the Label and Value:
=IIf(Parameters!Area.Value = "Test Area", "1", "2")
You also use an alternative method to create this parameter without using the expression:
Create an Dataset using below query to get the Parameter(“1”,”2”):
select distinct (CASE WHEN (@Area) =' Test Area' THEN '1' ELSE '2' END) AS FieldName from TableName.
In the Second Param(Param2) In both the “Available Values” and “Default Values” select the “Get values from a query”.
For more information about how to create cascading parameters, please see MSDN document which tell us how to do it steps by steps.
http://msdn.microsoft.com/en-us/library/aa337498(v=sql.105).aspx.
If your problem still exists, please feel free to ask.
Regards
Vicky Liu -
Default employee cost center based on work center
Greetings,
How can I default an employee's home cost center in IT0001 based on their work center assignment?
I've tried linking both the employee's position and their org unit to the work center via CR02. This did create the IT1001 records. The work center does have a corresponding HR work center. I've even tried attaching a cost center to the HR work center with the IT1001-A011 relationship. No luck.
Seems like OM side is doing what it should, but we want to get the work center's cost center in the costing tab over to the employee.
Maybe there's an integration switch that I'm missing somewhere?
Thank you!Thank you both for your thoughts. We have tried the ZXPADU0x exits, but it appears that SAP will not allow us to change an existing cost center value in IT0001 via defaults. I think this is because SAP wants to always keep OM and PA in sync, based on the A011 relationships in IT1001 on the position or org unit.
In terms of OP42, yes, we have tried adding relationships between the work center and position/org unit and also employee. And also have the cost center linked to the work center on the costing tab. But we're still not able to get that cost center to pull into IT0001.
I'm wondering if the integration between work centers and HCM is limited to relationship links on the OM side? -
OBIEE 11g Prompt's default value doesn't work with a presentation variable
Hi, I'm using OBIEE 11g and I have two dashboard prompts (Product Name and Product Number). Theses prompts are hierarquical, so the values that are displayed in the Product Number prompt have dependency with the values chosen on the Product Name prompt. This I was able to do, but now I want to put a default value on the Product Number prompt. The steps are:
1 - The user chooses the value for the Product Name Prompt and by doing that the Product Number prompt is automatically filled with the correspondent value.
But unfortunatelly this is not working, after choosing the value for the Product Name the default value for Product Number is not displayed (when you open the prompt the values displayed are correct and already filtered considering the Product Name but the prompt is not automatically filled with the default value).
What I did is:
On the Product Name Prompt I've created a Presentation Variable called PROD.
On the Product Number Prompt I've selected:
1 - For the "Choice List Values" field I've checked the option "Limit Values by All Prompts"
2 - For the "Default Selection" field I've chosen the SQL Results option and enter the following SQL:
SELECT "Products"."Product Number" FROM "Sample Sales Lite"."Products" WHERE "Products"."Product"='@{variables.PROD}
What am I doing wrong?
Thank you,
CarlaSorry I was wrong in my previous thread.
Actually your approach is not correct, Product Number choose constraint that will show as per the selection of Product Name.
Coming to default value for Product Number you are going for sql override that is okay but not work with variable, instead of setting default values for product number set that to product name.
if not you need to go for 2 different prompts
Prompt 1 Product Name hit GO
Prompt 2 will work based on as you defined earlier with variables
Hope this helps -
How to set default value in Profit Center field of Tcode F-02.
Hi!
Is it possible to set a default value for 'Profit Center' field in t.code F-02? Is there a way wherein the value will be copied in reference to the entered Business Area?
For example, if during parking/posting of document, user input a value of 300 in the Business Area field, the system will automatically put 300 in the Profit Center field. Is there a way to do this?
Hoping for your feedback.
Thanks,
AprilHi
Using the substitution this can be achieved.
TC:GGB1
Step-1: Prerequiste select the Company code for which this requirement is needed
Step-2: In Substitution field, select the the "Profit center" field on selection of the field - system'll asks you - How would you like to substfield BSEG-PRCTR ? with the 3 options
i.constant value
ii.exit
iii.Field-Field assignment
Select the 3rd option on selecting 3rd option before going to save that substitution it'll ask you to input which field should input the field BSEG-GSBER:Business area
Step-3: activate the above substitution in TC:OBBH
With the above settings whenever any value inputs in Business are field then the same value will be substituted in the Profit center field.
Note: Make sure in all FSG - business area & profit center having the field status optional
Can you tell me onething why this requirement has came ? Is business area and profit center are same in number and prupose
regards
Ramana
Edited by: Ramana on Jan 8, 2008 9:33 AM -
Changing default Work Center during CATS time entry
Hi Folks,
I am hoping someone here can throw some expert advice.
Currently during time entry in CATS, we have Work Center coming in from the Work Order. Its getting defaulted without any option to change it. Business here has a need to change it. I have llooked into the CATS profile to see if there is a place that enable the WC to be defaulted.
In Transaction CAC1, there is a section that shows what fields are being defaulted during CAT2 time entry. However I do not see the Work Center as one of the option there.
Can any one help?
In short, where do we disable the defaulting of the WC from the Word Order during time entry?
Thanks in advance.Hi,
Adding to what Kapil said; if the work centre is a grayed out in time shet screen then you can go to CAC2 transaction and make it editable. By this way users will be able to change the work centre on screen.
Regards
Sreekanth -
Setting default value to columns on tabular form is not working.
Hi,
I created a tabular form and i want to set some default values to columns based on the values in page items.
so i set the page item to column value in tabular form attributes by selecting the Default type as PLSQL Expression & Function DEFAULT value &P24_ISSUE_ID. it worked fine but
in the similar way i tried for the another column by selecting the default type as pl/sql expression & function and default value &P24_CASE_NAME.
but it throwing an error for this like failed to parse SQL query: ORA-00904: "C254DB": invalid identifier
i don't understand where i gone wrong even i checked for the data types of the columns, everything is fine.
so please help me out of this problem.Tulasi 1243 wrote:
for the first column
i selected
DEFAULT TYPE as PL/SQL Expression & FUNCTION
Default as *&P24_ISSUE_ID.* This is a number data type column
2nd column
Default Type as PL/SQL Expression & Function
Default as *&P24_CASE_NAME.* This is Varchar2 data type column.The appropriate options for a default value from a page item are Item (application or page item name) for Default Type and the item name ( P24_ISSUE_ID, P24_CASE_NAME etc) for Default.
*&P24_ISSUE_ID.* is not a "PL/SQL Expression or Function".
but it throwing an error for this like failed to parse SQL query: ORA-00904: "C254DB": invalid identifierWhat you are doing results in the APEX engine substituting the P24_CASE_NAME value "C254DB" into the default value and then trying to evaluate this string as a piece of PL/SQL. Outside of a block in which it is defined as a variable, constant or function "C254DB" is not a valid PL/SQL expression. -
Property default value in presentation doesn't work in vSphere Web Client.
Hi,
Some of my default values don't work in the vSphere Web client.
Here is an example :
The user need to choose a date, this input parametter is called "FormDateRealisation".
In the next step, I have a user interraction with external input called "AppDateRealisation", that is an attribute. In the presentation, this parameter as a Default value property set to "#FormDateRealisation".
It work perfectly in the Java client, but when I try the workflow in vSphere web client, the default value doesn't not work.
Does anyone have an idea how to solve this ? I already found a solution to bypass this bug (Creating a script to transfert the input to the attribute)... But I would like to use the default value.Hi,
I opened a ticket, they didn,t found the solution. But we found those logs:
Execution of action com.DemandeServeur/EspaceDisqueMultiple10 returned a javacsript 'undefined' value. Perhaps a return statement is missing in this action ? Will be converted to null.
Here is my code of "EspaceDisqueMultiple10":
Return type: string
Input: InGBHD (number)
if (InGBHD%10 != 0)
return "L'espace disque doit être un multiple de 10";
else
return; -
Parameter default value doesn't work in Discoverer Desktop 4i
Hello,
I have a parameter called 'Organization' in discoverer report.
I want to set its default value to one organization from the list of values. I edited the parameter
and selected that value from the list in the Default value field. But,when I run
the report, it shows the recently used value for that parameter,
instead of showing the default value.
I have the same problem with all parametrs in workbooks in Discoverer.
I am using Discoverer Desktop 4i (4.1.41.05.00).
Is there anything i can do to make Discoverer show me the default value for the parameter every time i run the workbook?
Thanks in advance!Thanks Rod!
Unfortunately it seams that seting that p[reference doesn't work for my version of Discoverer.
That option is introduced with version 4.1.43 and we are using version 4.1.41.05.
I suppose i can't solve that problem on another way in this version of Discoverer Desktop..?
Best regards! -
Message no. IW056 Work center change -- default data redefined
Hi,
After EHP5 Upgrade. I am getting Message no. IW056 Work center change --> default data redefined during Maintenance Order Change (IW32). Please suggest me Is their any SAP Note or any Configuration setting to fix it.
Regards
Maheboob
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics
Edited by: Paul Meehan on Oct 25, 2011 11:56 AMHi Maheboob
Im glad the note worked -
To find the note , you could do a note search on the message IW056 you received and the support pack level you are on ..
For EHP5 the note is valid up to SAPKH60504.
The IW056 is listed as a keyword so if you search on it the note should be returned.
Thanks-
Enda. -
How To Get Value PRD No TO Work Center NAME
Hi Guru
i created Zreport the Parameter are P_AUFNR TYPE AFKO-AUFNR OBLIGATORY ,
P_ARBPL TYPE S022-ARBPL OBLIGATORY .
Currently i am doing
i enter any Production Order No and Work Center are entering Manually .
i want
after entering Production No User Press Enter Button
and Work center display automatically on F4 Help Related that Production No.Hi amit,
You acn use event At selection-screen on help request.
In this you can use following function module to get screen field value.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
TABLES
dynpfields = lt_dynpread
depending on this value of prod ord on scrren you can restrict next F4
hope this will help.
Thanks Dhiraj.
Maybe you are looking for
-
Pass BP number through partner function in Lead
HI, We are creating lead from BP screen. when we click the new button in the Lead Assignment block a list of lead types appear whrn i select one type the lead opens with the BP as sales prospect in the lead. We have a requirement to validated the
-
I have a four disks Sonnet set to configure in RAID 1. When configuring it, Disk Utility gives me the option of "Raid spare" or "Raid slice" for each disk. What is the best option ? Slide or Spare ?
-
Text Variables in Report Designer
We are creating some formatted reports in BI 7.0 using the Report Designer tool. One of the requirements is that when the report is flitered by a certain characteristic, say for e.g. Country = 'DE', the text associated with the country e.g. 'Germany'
-
Hello everyone - I was hoping to use Keynote as part of our broadcast system. We broadcast news and I wanted to use it for fast graphics. Our broadcast server only accepts DV STREAM files though. On a look around the internet, it seems I should be ab
-
User exit for PGI via delivery (Vl02N)
Hi Folks Can you suggest me appropriate user exit which can be used during PGI for delivery in Vl02N. This should get triggered when POST PGI tab is hit in VL02N. Via USer exit I want to change the GL account in the accounting document for PGI ( GL a