Work Center displaying wrong in CO14 Transaction

Dear Experts
We are facing a Problem at time of Confirmation Through CO11N,Under work center field there are 2 fields Current to Confirm & Planned to Confirm,user is entering same Work Center in both fields,But when we save the confirmation & check in C014,we are seeing in Current to Confirm field some Other work center which is not there in Routing.
From where system is picking this work center.
I am not able to understand.
Is this a customisation issue,Or a Master data issue.
Regards
Sandeep patil

Hi Sandeep,
Planned to confirm work center is  Production Order work center
Current to confirm work center is actual running work center (becase due to some reason for doing other work center)
To Check confirmation parameters (SPRO)
OPK0 (may be included Details area 0410 or 0420)
Regards,
Sankaran

Similar Messages

  • Where can i find Main work center field value in il03 transaction ??

    Hi experts,
    Where can i find <b>Main work center</b> field value in il03 transaction.
    Iam looking for the table from where that value will be filled.
    thanks
    Suresh

    Hi anji reddy,
    No that filed is not avaiable in that . can please tell some other soulution ...
    ASAP...
    thanks,
    Suresh

  • Dual Core Center displaying wrong CPU clock speed

    Hi,
    I've got the 965 Platinum board and I have overclocked my E6300 Allendale to 2.331ghz (from 1.86ghz).  My problem is that the MSI Dual Core Center is showing my CPU as being clocked at 2.997mhz.  It seems to think that, because I've upped the FSB to 333mhz, I must have a CPU with a multiplier of 9 instead of the 7 of the E6300.
    If Dual Core Center is not reading the CPU clock correctly how can I trust that it's reading the temperature right (which is really the only reason Ihave it loaded at all).  I know the CPU is only set at 2.331 because the BIOS gets it right, System Properties gets it right and Intel's Thermal Analysis Tool gets it right.  It's only the Dual Core Center that gets it wrong.

    Make sure you are using the newest version of DCC.
    Other than that, DCC might not be the best tool to monitor your system.
    Quote
    how can I trust that it's reading the temperature right (which is really the only reason Ihave it loaded at all).
    To monitor core tempertatures use Coretemp: http://www.thecoolest.zerobrains.com/CoreTemp/
    A very good program to monitor all kinds of stuff ist everst 3.5.

  • Work Center Capacity Shift Interval

    Hello,
    I'm looking for a function or Tables from which I can get Work Center Capacity Shift & Interval data, Transaction CRC3.
    Any help in this regard will be highly appreciated.
    Regards,
    Hashir Ahmed.

    hi,
    check these tables.
    AFIH     Transparent table     Maintenance order header     Application table (master and transaction data)
    AFKO     Transparent table     Order header data PP orders     Application table (master and transaction data)
    AFRU     Transparent table     Order Confirmations     Application table (master and transaction data)
    AFVC     Transparent table     Operation within an order     Application table (master and transaction data)
    CABN     Transparent table     Characteristic     Application table (master and transaction data)
    CBPR     Transparent table     CO-ABC: Activity Master Table     Application table (master and transaction data)
    COEP     Transparent table     CO Object: Line Items (by Period)     Application table (master and transaction data)
    CRCA     Transparent table     Work Center Capacity Allocation     Application table (master and transaction data)
    CRHD     Transparent table     Work Center Header     Application table (master and transaction data)
    CSKS     Transparent table     Cost Center Master Data     Application table (master and transaction data)
    CSSL     Transparent table     Cost Center / Activity Type     Application table (master and transaction data)

  • How To Get Value PRD No TO Work Center NAME

    Hi Guru
    i created Zreport  the Parameter are P_AUFNR TYPE AFKO-AUFNR OBLIGATORY  ,
                                                               P_ARBPL TYPE S022-ARBPL OBLIGATORY .
    Currently i am doing
    i enter any Production Order No  and Work Center are entering Manually .
    i want
    after entering Production No User Press Enter Button
    and Work center display automatically on F4 Help Related that Production No.

    Hi amit,
    You acn use event At selection-screen on help request.
    In this you can use following function module to get screen field  value.
    CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
         dyname               = sy-repid
         dynumb               = sy-dynnr
       TABLES
         dynpfields           = lt_dynpread
    depending on this value of prod ord on scrren you can restrict next F4
    hope this will help.
    Thanks Dhiraj.

  • How to find work center in REM from the material Documnet number

    Hi ,
    We want to develop a Z report for the repetitive manufacturing cycle. Please let me know the logic how to get the work center from the material document that is posted after backflushing MFBF tranaction.
    I will elaborate it little further. From the material document number that is genearted out of confirmation from that document no how can I find the work center so that we can so show the throughput of each work center.
    Please avoid standard transaction of MCRP etc.
    Thanks & regards

    Dear Kumar,
    I'm not sure whether you can get the work center details,but you can get the production version number from you can get the
    rate routing details.
    Give a try by passing the document no to table BLPP and get the document log number and pass on the document log number to
    table BLPK,by which you can identify the production version.
    Also give a try using this FM,RM_DISPLAY_AFRU_REM,I guess you can get the exact work center details from here.
    check and revert back.
    Regards
    Mangalraj.S

  • Displaying the Capacity Load in a Work Center

    Dear Sir,
    i would like to Displaying the Capacity Load in a Work Center for the previous periods . that is for the last two months i would like to know the capacity load in my work centre. in mc01 capacity load are displayed for the future but not in the past
    thanking you
    arun kumar

    Hi,
    In CM01 transaction Menu click on Settings -> General;
    In the data area Interval to be evaluated start field will be blank by default. you can enter in -value so that start date would go in past.
    click on Time periods button . check Period of database selection From date. You can get details only from the date for the Overall profile attached.
    if this has not solved your purpose, you have to change OverallProfile.
    Planning -> Profiles -> Overall Profiles.
    Select another Overall profile.
    Regards,
    Krishna Mohan

  • Work Center not appearing in CM25 display

    Hi All,
    We have three work centers assigned to three consecutive operations in a planned order of plant XX. We have a Z  (modifed version of SAPCRPG001)overall profile in CM25 with the initial selection screen where we give plant XX as the input and execute the transaction. In the output we are able to see only the data of the first workcenter whereas the other 2 doesnt appear at all.
    However when viewing the same in standard profile SAPCRPG001, we are able to see the data for all the three work centers. (Red Bar graphical view)
    We are unable to find out how Z profile is restricting the 2 work centers from getting displayed in CM25 output for a given planned order.
    I have compared the first work center with the other 2 and could confirm that there is no any change at work center level.
    What could be the issue ?
    Thank you

    Hi Brahmankar & Dimas,
    Thank you for the above message. We have checked the above settings and observed that it is for selection screen setup. However i would like to clarify once again the actual issue, that i am facing.
    I have 3 work centers in a process order (as shown in attached image 1)
    . Each have different operation time. When i view this order in CM25 using standard profile SAPCRPG001, i am able to see three workcenters with respective loads along with the red bars in the graphical view (as shown in attached image 2).
    Now, when i use the Z profile instead of standard SAP profile, I am able to see only one work center with its load and corresponding red bar in the graphical view (as shown in attached image 3). I am fine with seeing only one work center, but i would like see the cumulative load of all the three work centers against this work center i.e the red bar should be longer and euqivalent to the sum of loads of the three work centers.
    I have explained the same in the attachment file with relevant screen shots. Please advice.
    Image1
    Image2
    Image3

  • How do I create a new Work Center for the transaction launcher and links

    Hi
    The requirement here is for me to find out if I can create a new Work Center that will contain up to 6 assignment blocks and each block having either links to websites and BW reports, or triggers to R/3 applications via the transaction launcher.
    Can I do this purely through customising or do I need to create a new view using BSPs? If I can do it through customising please could I have a few pointers to what component I would need to use/copy?
    Regards
    Declan

    Hi Robert,
    Thanks again for taking the time to reply.
    Just so I understand, if I want to show a work center I need to link it to a component / view? I think this was the original query - do I need a developer to create the view that contains the 6 blocks with their links to reports, transactions and websites? I think when I talk about blocks I mean 1 viewset containing 6 views. There is no SAP standard view that would suit my requirements is there? Even if the work center had 8 views, I can always hide the two views in configuration.
    After the developer has created the view, I then reference that component in the target Id in the define logical links section of my work center.
    If my understanding is right, then it follows that it is not possible to create a user specific work center without some development.
    Is this correct?
    Cheers
    Declan

  • SAP HR : Wrong working days displayed in Z report

    Dear Friends ,
    I have made a z report for SAP- Hr to show working days of employee of a particular month
    when I am running report for all the employees then working days are wrongly displayed in alv
    report but when I am running the report for a particular employee then the working days are
    correct . I have done debugging also , every thing is fine in debugging , Now I am confused
    where is fault I have to run the report for all employee.
    Kindly suggest .
    Regards
    Rihan
    SAP-abaper

    hye ,
    here, some code for your reference ,
    LOOP AT it_empall WHERE pernr EQ stru-pernr.
          SELECT SINGLE SUM( abwtg ) FROM pa2001
                              INTO absdays
                              WHERE pernr = it_empall-pernr
                              AND   endda BETWEEN p_begda AND p_endda
                              AND   begda BETWEEN p_begda AND p_endda.
    "FOR RESIGN
            select single begda from Pa0000 into enddt where pernr eq it_empall-pernr
                                                       and massn eq 'H6'.
    "FOR HIRING
             select single begda from Pa0000 into begdt where pernr eq it_empall-pernr
                                                       and massn eq 'H1'.
         totdays = p_endda - p_begda.
          totdays = totdays + 1.
         if enddt GT p_begda and enddt LT p_endda.
                           X = ( p_endda - enddt ) + 1 .
                           workdays = totdays - x - absdays.
                           stru-kaltg = workdays.
         elseif begdt GT p_begda and begdt LT p_endda.
                          X = ( begdt - p_begda ) .
                          workdays = totdays - x - absdays.
                          stru-kaltg = workdays.
         else .
                          workdays = totdays - absdays.
                          stru-kaltg = workdays.
         endif.
      ENDLOOP.
    Note : here p_begda AND p_endda are month start and end date.
              and begdt and enddt  (  these are  employee joined and resigned date)
    Pls suggest .....

  • Wrong Work center picking up Time sheet

    Hi
    Scenario is as follows:
    Earlier Employee has HR assignment to one Work center 1 -WC1
    Later, Employee was Assigned to Work center 2- WC2
    Problem: When booking time sheet in CAT2 ,  for service order, WC1 was picking up, even though in Service order WC2 is assigned.
    We have deleted the Employee HR assignment from WC1 , but still in Time sheet WC1 is coming.
    Please suggest.
    Thanks.

    Is it possible for anyone to tell, from where the work center is being picked up in CAT2. We are processing time sheet booking for service order. The work center in service order is something different than what is picked up in CAT2.

  • How to get a list of production orders for a work center?

    Hello SDN Community, 
    I have an requirement to display in a pop-up window a list of production orders for a work center.
    Does anyone know which screens/transactions would show this relationship?
    Or better yet, does anyone know how to demonstrate this from the tables themselves?
    Thank you,
    Dean Atteberry.

    Hello Mangalraj.S
    >>Goto COOIS-->For the field List select PPIOO000 - operations and layout -->standard layout
    >>and execute,by this you will be able to see the operations for each order and to which
    >>work center they are assigned.
    The system I am working on is ECC 6.0.
    For this system the values in the dropdown for the "List" field are "Capacities, Items, Order Headers, Sequences, Trigger Points, etc".  But nothing that says PPIOO000 - operations and layout.
    >>Or else in the in input screen of COOIS,enter the work center for which you want to see which
    >>are the production order's assigned and execute.
    For system I am working in, I do get a grid display when entering a work center.  It has columns like "Order, Material, Icon, Order Type, MRP cntrlr, etc."   But no column with Work Center.
    Any further insight into how to use this transaction to display a list of production orders for a work center would be greatly appreciated.
    Thank you,
    Dean Atteberry.

  • Work center selection during UD

    harhe e Hi,
    We have the following scenario,
    Production guys confirmed order confirmation or make backflushing confirmation to update the WIP/FG stock,
    then quality cleared such stock through posting to unrestricted or blocked stock or rejection store location,
    Quality person requires during UD posting ,work center/Machine selection should be there in QA32 transaction,
    so that the analysis could be made for the work center,
    Best Regards,
    Devendra

    Using Inspection Point assignment, you can record the Work Center / Machine.
    But with Inspection Point, you can't have F4 selection option in standard. You have to type the Work Center code manually which may prone to error.
    You can check for some user exits to define Sub screens to pop up.
    QEEM0029  User-Exit for Characteristic Overview Subscreen
    QEEM0030  User-Exit for Subscreen: Characteristic Single Screen
    QEVA0004  Exit for changing information line in usage decision header
    QEVA0005  User subscreen for displaying add. data for usage decision
    QEVA0006  Entry to usage decision transactions

  • Read Routing and work center details from transfer order

    Hello
    I am using transaction LT31 to print a form for the transfer order.
    The customer wants me to print a field that is in the work center details of the routing for this material and plant.
    I can see this data with transaction CA02 where i enter material and plant,and then the work centers are beeing displayed.From here i can double click on the work center and see the field Supply area that i have to print.
    My answer now is,how to read details on the work center starting from my transfer order number.Which is the table connection between transfer order table LTAK and the tables where i can find the work center details.
    Thank you

    I have found the solution:
    ltak-tanum = mseg-tbnum
    read aufnr from mseg and go to afko
    mseg-aufnr = afko-aufnr
    read plnnr from afko and go to plpo
    afko-plnnr = plpo-plnnr
    from plpo read arbid and go to crhd
    plpo-arbid = crhd-objid
    from here,we can find the arbpl and the field that i was looking for PRVBE

  • Set up of System Monitoring with SPS 15 only through "Work center"

    Hi!
    We use SAP Solution Manager SPS 15 and would like to set up System Monitoring function in order to monitor satellite systems.
    Is is only possible as of SPS 15 with tcode "solman_workcenter"?
    I have heared as of SPS 15 the tcode "dswp" provides only Display view...
    Thank you very much!
    regards
    H. Thomasson

    Hello
    Is is only possible as of SPS 15 with tcode "solman_workcenter"?
    --> If you want to configure Solution Monitoring, you can follow rkt in service market place. With SP15, SAP has given additional functionality to access solutions or projects through work centers. Now its up to you to use this functionality or you can directly go to solution_manager or DSWP to configure, doesnt matter.
    I have heared as of SPS 15 the tcode "dswp" provides only Display view...
    --> Have you tried? Its not Display, either way through work center you are going to access the same transaction. Please check.
    Thanks
    Sharmishtha

Maybe you are looking for