Work center field in co11n

Hi, is it possible in CO11N Screen to change the workcenter as it is now gradeout. i want to keep wc field as amendable? pls advise the settings.

Hi,
You cant change the work center for confimation time but you can enter new actual work ceter for that time of confirmation, pls change below configuration
To Check confirmation parameters (SPRO) OPK0
(Pls include Details area 0410 or 0420)
Regards,
Sankaran

Similar Messages

  • Where can i find Main work center field value in il03 transaction ??

    Hi experts,
    Where can i find <b>Main work center</b> field value in il03 transaction.
    Iam looking for the table from where that value will be filled.
    thanks
    Suresh

    Hi anji reddy,
    No that filed is not avaiable in that . can please tell some other soulution ...
    ASAP...
    thanks,
    Suresh

  • CO11N work center mandatory and without default

    Dear guru,
    i need to make work center mandatory in CO11N and without any default
    from production routing.
    I donu2019t want to use SHD0.
    Do you suggest any exit to obtain this ?
    Thanks in advance

    Hi,
    I believe the user-exit which you should look at is:
    CONFPP03 PP order conf.: Cust. specific check after op. selection
    or
    CONFPP05 PP order conf.: Customer specific enhancements when saving
    Check with your abaper if the above can meet your need.
    Regards,
    Vivek

  • Work Center displaying wrong in CO14 Transaction

    Dear Experts
    We are facing a Problem at time of Confirmation Through CO11N,Under work center field there are 2 fields Current to Confirm & Planned to Confirm,user is entering same Work Center in both fields,But when we save the confirmation & check in C014,we are seeing in Current to Confirm field some Other work center which is not there in Routing.
    From where system is picking this work center.
    I am not able to understand.
    Is this a customisation issue,Or a Master data issue.
    Regards
    Sandeep patil

    Hi Sandeep,
    Planned to confirm work center is  Production Order work center
    Current to confirm work center is actual running work center (becase due to some reason for doing other work center)
    To Check confirmation parameters (SPRO)
    OPK0 (may be included Details area 0410 or 0420)
    Regards,
    Sankaran

  • Work Center Mandatory  in PM Order

    Hi Experts,
    May i know how can i make Mandatory, both  Work center (Mn.wk.ctr) Under Person Responsible sub screen and the work center ( WkCtr/Plnt ) under first Operation sub screen  of the Header TAB in PM Order.
    Regards,
    Kavvya

    Hi,
    The Work Center (CAUFVD-VAPLZ) field under 'Person Responsible' should always be mandatory as it is hardcoded.
    The Work Center (AFVGD-ARBPL) of operation can be set with transaction OIOPD. If the 'work center' field is not available in OIOPD, then see the correction from note [1282463|https://service.sap.com/sap/support/notes/1282463].
    -Paul

  • Work Center in CO11N

    Hi All,
    There are two fields for work center in the T-code CO11N , one is non editable and the other is editable.
    We have a scenario, In a specific "Z" report we need to capture the value in the editable field for the Work Center.
    i.e. In the T-code CO11N we need to capture the field value of the <b>ARBPL</b>.
    As this field refers to a structure we need to know in which table it gets stored.
    Help and Suggestions will be much appreciated.
    Regards.
    Ramesh.

    Hi Krishna,
    We have already tried with the Table AFRV, but the editied value is not getting stored in tht aprticualr table.
    Instead itz referfing to the Structure AFRUD.
    Regards.
    Ramesh.

  • Can we add additional fields in work center creation using any user exit ?

    Hi,
    is there any user exit using which we can have some tab and fields such that we can add/ update the equipment to wotk center in CR01 ?
    regards,
    madhu kiran

    hi,
    requirement is can i get the additional fields like equipment and asset in the work center creation ?
    i would like to maintain these against a work center
    and  using any user exit can i add additional fields ?
    regards,
    madhu kiran

  • Work center parametrs- co11n

    Hi, we assigned 6 parameters like setup, machine etc in work center. Same work centers used in prod orders. While confirming against prod order and operation no in co11n screen, only 3 parameters were displayed where as we set 6 parameters in work centr. Please advise how to display all parameters mentioned in work center in co11n screen.

    Dear Raju,
    1) For this you need to settings in OPK0
    2) For ur confirmation profile double click it
    3) Now under are selection for second option take 0310 ( activity 1 to activity 6 )
    4) Now click on default tab, for all 6 services there should not be any  ticks
    5) then click on Preview, now system will show all 6 parameters
    5) then save & back & execute CO11N, u can see 6 parameters
    Regards
    Madhu Kumar

  • Fields for Super BOM, Work Center & Super Routing for Variant Config

    hi! gurus,
    Please can you give me mandatory fields & values for Super BOM, Work Center & Super Routing for Variant Config
    thank you

    Hi,
    In the Super BOM you need to maintain the object dependencies.
    Workcenter fields are as usual for other production processes.
    Also you can use search option in the forum to view the threads posted in the past. There are many posts related to variant configuration.
    Regards,
    Senthilkumar

  • IW51-52 - Updating fields Main work center and Maintenance plant

    Hello Experts.
    I Have a task which includes recieving a file and using the data to create new notifications. I need to update the fields above (Data elements GEWRK & SWERK ) but i can't find the right BAPI or Function which will do this work for me.
    Thanks for your help.
    Motty Gal.

    Hi,
      Thanks for your response. Actually after doing further R&D, I saw that work_ctr requires the object key of the work center. I fetched the OBJECTKEY from CRHD & passed. It automatically updated both work center & plant associated.
        Awarding you points for your help.
    Thanks buddy!!!

  • CO11N: how to perform confirmation entry authorization per work center

    During production order confirmation entry authorization per work center is required however the standard authorization object for the confirmation Is only per plant and order type

    Hi,
    Yes, you are correct..
    There is no check for  the workcenter, unlike for Network Orders..
    But, you can use the User Exits:
    CONFPP02  PP order conf.: Customer specific input checks 1
    CONFPP03  PP order conf.: Cust. specific check after op. selection
    CONFPP04  PP order conf.: Customer specific input checks 2
    for your own chcks at the time of confirmation..
    Take the help of your ABAPer..
    Regards,
    Siva

  • How to find the reporting for work center machine wise

    hi gurus
    My question is . In one work center machine capacity category 2 machines are used. Client is asking the report machine wise. i.e as 2 machines are available .What is the capacity utilisation for each machine.Provide me the information for this. Thanks in advance
    kalyan

    Hi Kalyan
    you have to make some settings in production order & work center first.
    In work center capacity header ,you have to make indiovidual capacities as 2.
    In the same capacity header screen by going through the menu Goto--->individual capacitities  define these different individual machines.
    In the production order operation detail screen goto " capacity reqmt assignment " assign the quantities for different work centers.
    Adfter this in the confirmation CO11N you have to fill the split field accordingly& confirm different wortk centers seoperatley.
    Then you can the report in the CO14 for diferent work centers.
    you try this.
    Regards
    YMREDDY

  • HR assignment to Work center

    Hi All,
    I am having few queries with the above subject.
    My customer is asking that he will assign persons(from HR) to the work centers. and based on the assignments done he want some functionality like
    1. At the time of operation confirmation through CO11N in the person field only assigned persons(in Work center) should be available
    2. At the time of capacity availability check system should check the person attached to  work center only. e. g. suppose two persons for 8 hrs are assigned to work center then if order need 18 labor hours, in this case system should tell that capacity is not available. and then if third person added to Work center master then it will tell capacity is available.
    Now my question is :
    Whether above requirements are possible? if yes then please please tell me how to do?\
    Millions of thanks in advance.

    Hi Jigar B patel,
    Well Work center is the main integration part for both PP and HR OK.
    As your requirement is to maintain the responsible person for the work center follow the path:
    1) SPRO -
    > PRODUCTION -
    > BASIC DATA -
    > WORK CENTER -
    > GENERAL DATA -
    > DETERMINE PERSON   
        RESPONSIBLE. 
    2) GO TO THE PARTICULAR WORK CENTER YOU ARE USING THROUGH T-CODE CR02 OR CR03 OK.
        THEN GO TO THE TAB CAPACITIES TAB DOWN THERE ARE PUSH BUTTONS THE VERY FIRST ONE IS CAPACITY BUTTON
        PRESS IT -
    > YOU WILL GO TO CAPACITY HEADER SCREEN -
    > ON THE TOP YOU CAN FIND PUSH BUTTON CALLED
        AVAILABLE CAPACITY PROFILE -
    > ON THE TOP OF THE YOU CAN SEE A GRAPHIC PRESS IT THERE YOU CAN GET AN
        IDEA OK.
       I hope it helps you.
    Regards,
    Madhu.G

  • Update Profit Center Field in CO Line item tables

    Hi,
    We are working on ECC6.0 NewGL with Real-time CO-FI integration for Cross Company Code and Cross Pofit Center.
    For those CO internal documents (like activity confirmation at production order) where there is no cross company code or cross profit center postings, no FI document is generated and hence table FAGLFLEXA is not updated. So, we wanted to take data from CO table COEP / COVP for these internal CO documents. However, there is no Profit Center field in CO line item tables COEP / COVP. We don't want to refer to Object Number (OBJNR) of COEP / COVP tables and take profit center from master table of cost centers, IOs etc..,as Profit center in the cost center, IO masters may get changed latter.
    I tried to generate a new report through report painter from structure CCSS, but Profit center is not defined as Charactericts there. Hence of no use.
    Can we append Profit Center field in CO line item tables COEP / COVP and update tatabase at the time of posting? Is there any risk?
    Please suggest any other alternative...
    Thanks,
    Bijay

    Hi,
    As per the standard process we can't derive PC from CO-internal Object...as per my knowledge.
    Better you can derive from IO-CC master PC ....if your question that it will change frequently then -no control can make.
    Regd,
    Kha

  • Hide/Suppress Cost center field in MIGO and MB1A for movement types 551&552

    Hi All,
    Can anybody tell me how to suppress or hide the cost center field in MIGO or MB1A for movement types 551 and 552?
    I did below settings and it worked fine for only MB1A and for MIGO still it is showing cost center field.
    IMG > Materials Management > Inventory Management and Physical Inventory >Goods Issue/Transfer posting > Define screen layout > select movement type to change the option.
    Also I did gothrough the settings for Enjoy transaction (MIGO) there we have only option to make fields either  "Required entry" or "Optional entry" and we don't have an option to hide/suppress.
    Please advise or help me .
    Thanks in advance!
    Regards,
    Praveen

    Hi
    The cost center field is a required field in mvt type 551 as you are scrapping materials, some cost center will need to take the cost of this operation.
    Anyway, you first need to make the field as optional for example, before you move.
    One option is that you create a screen variant in Tcode SHD0 for MB1A, where 551 is setup as constant (with content) , and mark Cost center as invisible and assign this screen variant to a transaction in SE93.
    regards
    Sidi

Maybe you are looking for