Work Center Group Confirmation

I have the following Work Centers:
FOUNDRY
WC1
WC2
WC3
I made a hierarchy where all the work centers are under FOUNDRY.
Now I use WC1/2/3 in my routing. My question is, is there anything that can be done where I could confirm just FOUNDRY and all of the operations in the work centers beneath it would be automatically confirmed?
Also, when I follow up I dont want to follow up on each individual work center, I want to follow up on the FOUNDRY level, possible?

but that would mean in my routing I have to put
WC 1 / 2 / 3 and ALSO FOUNDRY (which is not logical, foundry is just created to group the WCs)
Also that would also leave the problem of following up on the Foundry level, I need a report that wouldn't show the WC1/2/3 just show the progress on the FOUNDRY (group) level.
Thank you

Similar Messages

Automatic change of Work Center during Confirmation.

Happy New Year to all!
Just want to ask if anyone of you encountered the scenario during confirmation in which the backflushed work center was changed. The user claims that they did not do any changes during confirmation nor did they change manually the order itself. The confirmation happened last December and they only noticed it this month when they were checking the reports.
I did not configure their system so that they can change the Work Center during confirmation. By default, the work center is grayed out during confirmation.
Hope to hear from some of you soon!
Thanks and regards,
jLmendoza
Edited by: John Luis Mendoza on Jan 4, 2011 3:15 AM

Dear
If your production order operations are re-scheuled and dispatched after Capacity Avalaiblity check in cm21/cm22/cm31 etc , then during the dispatch of operation , you have option to change Work Cnetre , time , date based on the selection option in Startgy profile (CM31/CM21-Enter the WORK CENTRE /Order ) and check wether work centre is changed.
One more option may be in Order Change in CO02-Operation Overview -Operation -Work centre -Here user may change the Work Centre .
If you have Order Change management active then you can trace the same .
Refer : Production order change history
Otherwise , there is not such confirguration in SPRO where work centre can be changed automatrically during confirmaiton because it will grade out based on the ste of confirmaiton default screen in OP00.
Hope it clarifies
Regards
JH

Can we control Work center group links using auth object UIU_COMP

Hello All,
We are running into an issue while doing our PFCG role configuration.
I need to know if we can control Work center group links in a business role through auth object UIU_COMP.
We can control Workcenter's but not 'Work Center Group Links'.
Here is what we did:
- We have a business role Z_RA_DEFAULT.
- The Nav Bar Profile SRV-PRO for this business role has some work center group links that are checked in menu and visible.
- I'm trying to find the values in the auth object UIU_COMP to restrict Work center group links.
- Even though the values Work center group links are in menu and visible,
I want to remove these Work center group links from the screen using the auth object.
- If we remove the check from in menu and visible in the business role the Work center group links disapper from the screen.
Right now this is only way we are able to controle Work center group links.
Question:
- Can I use UIU_COMP to restrict Work center group links?
- any another auth object that controle Work center group links?
- any document/ website / info available which tells us what can we restrict with auth object UIU_COMP?
- or any other way of doing this... like code change, user exit, ....?
Really appreciate your help.
Thanks,
Nasir

I am not sure if I have understood the issue correctly, but still what stops you from actually creating a clone business role to your existing business role and deactivating the in menu visible work center group links. Use this new business role for users who need to be prevented from viewing the work center groups links in question.
If you are going to use authorization objects to control the visibility wont it impact all users (still defeating your original purpose?)
Again apologies in case I have got the question wrong.

Buyer Work Center - Group by Choice List Needed to Requistion

Hi Guru's,
In R12.1.3 Application - Purchasing Super User
I am looking for personalization of self service page in PO Buyer work center for Requisition update.
I wanted choice list/LOV Group by in Request header of Requisition self service page to be defaulted to "Requisition" instead "Default".
I didn't find option in self service personalization of this page. Can some body help me in this how to default it to requisition.
Thanks in advance...
Edited by: user8822881 on Sep 24, 2012 6:22 AM

Hi,
You need to do it by profile option setup.
Setup the profile option "PO: Default Requisition Grouping" to "Requisition" at the site level.
You have two options - "Default" and "Requisition".
Thanks,
PS.

Work center Hierarchy

Dear Gurus,
How can I use work center Hierarchy for Capacity Planning.
I have 5 Lathe machines. How can I use Work Center Hierarchy?
I also need Work Center Wise confirmation.
Please guide me. Also let me know how should I maintain data in work center as well as in routing.
Thanks in advance
RG

Create a new WC (in CR01) as category 0004. This will be the top level WC in your hierarchy. <BR sab="44">Create a hierarchy (in CR21). <BR sab="46">Add your 5 lathes and the newly created top level WC to the hierarchy (in CR22). This can be tricky: the WC you just created must be the top level, the other 5 must be under it. <BR sab="50">Pull the capacity data (in CM01) for the hierarchy: go to settings, hierarchy, check the cumulation of requirements and capacities and type the hierarchy name. <BR sab="54">Route things as before, to the original 5 lathes.

Work center design and operation confirmation

Hi All,
In my scenario im grouping the similar m/c to a work center
say for ex. 4 lathes m/c into a single work center as LatheALL and also the indiv cap as 4
my customer wants the traceability in which m/c the job is done
So i had designed in such a way that
1 LatheALL -4 cap(this will be additional wc)
2. lathe1 - 1cap
3.lathe2 - 1cap
4.lathe3-1cap
5.lathe4-1cap
in the routing only latheALL will be given., this will help customer in planning
when going for operation confirmation i will give confirmation for that operation and will confirm as lathe1or lathe2 or etc.. this will help prodn dept for traceability in which m/c the work is done
this is method i have informed to client .,
pls advice is this approach is correct ?
also suggest by giving confirmation for another work center will the capacity for the original work center will be reduced
Regards
Anand Srinivasan

Hi Anand,
this is method i have informed to client .,
pls advice is this approach is correct ?
yes, during confirmation time to enter the orginal actual work center, this suitable for your client requirement, do the settings for OPK0 - change the confirmations parameters (0410 or 0420)
Regards,
Sankaran

Change Work Center during production order confirmation

Dear All,
I must to modeling this situation:
I created an production order. In routing I used an work center A.
After I confirmed a half of quantity, the work center A was damaged and I must to change it, with the work center B.
The system allow this change, but when I checked the costing, the situation isn't real. The system counted the costs just for the work center A, and no for work center B.
My question is: it's possible to change the work center, during production order confirmation and the costs updated with new cost?
Thank you for your answer!
Regards,
Marian

once a Order is released, the Process order detaisl for that order is frozen.
however if you want to do it, change the order status to CRTD after reversing the Movements done.
Do READ MAster data , this will copy the new Work center , redo the previously done Moevements.
if the change is long term.
or
Just manually add the new work center and do the processing. if the change is temporary.

Why authorization for cost center groups does not worked ?

hello all,
I would like to give authorization for a CO report (S_ALR_87013625) based on authorization values : cost center groups.
But, unfortunately, it doesn't work. I get a message : No authorization for x of x read records.
Is it only possible to give authorization on standard hierarchy and cost center ?
Please, help me
Thanks and best regards

hi,
Run the su53 transaction.See what authorization was missing

Confirmation - Work Center - Routing

Hi all,
I try to understand routings. When i try to confirm an operation with BAPI_PRODORDCONF_CREATE_TT for a work center which is not defined in routings, it returns no problem. But it is not in routing. How can it be confirmed? Or what changes when define the workcenter and confirm with it?
Thanks,

Has it relation with standard times ?
Regards,
techmaster

Assignment of activity group to work center

Hi,
We want to assign activity type to work center more than six,
how we can assign activity type more than six to work center?
i have created activity type group in klh1,
in activity group i have assigned activity type more than six,
How we can assign activity type group in work center?
Regards
Gajjen

HI
It is not possible to assign more tha six actvities to a cost center as per SVK defined in the WC.
Check with the business process field for assign with your CO guy in thw WC.
A business procedure within an enterprise that uses resources and can involve activities from a number of different cost centers in a controlling area.
When executing a business process, activities can be utilized for several cost centers of a controlling area.
Check and revert
Regards
Anupam Sharma

Quality Module Question: Grouping Defect Codes by Work Center

Is it possible to group Defect Codes by Work Center?

Welcome to the forum.
Please post this question in the below forum
[Forum: ERP Operations - Quality Management (QM)|SAP ERP Operations - Quality Management (SAP QM);
thanks
G. Lakshmipathi

Combine Work Center Link Groups in one Work Center

Hello Experts,
our requirement is to combine the Work Center Link Groups of several Work Centers into one Custom Work Center.
For example, the work centers Knowledge Management and Managing Operations. (IC-MGRKM, IC-MGRMA)
They have Work Center Link Groups like IC-MGMA-CR or IC-MGKM-CR. Now we defined an own work center Y-IC-MGRMA and assigned these links groups (and others) to the Work Center.
However, when we open the Work Center we only ever see links of one work center type (for example only the links of Knowledge Management).
Is it even possible to combine the different work centers into one big work center with many links? What would we have to do to achieve this?
Help would be appreciated!

If I am not wrong you are assigning standard work Center Link Groups like IC-MGMA-CR & IC-MGKM-CR to newly created Work center Y-IC-MGRMA .If I try the same, all related links can be made visible. The process you are following is correct.
You may have confused with the nomenclature of your work center ID - Y-IC-MGRM. Please look into the "Group ID" column, if you are assigning standard group links as mentioned above you will find three logical link ID for Knowledge management & two for MGMA too. In short if five logical links are available in second level navigation then things are correct at you end. I tried it and its working fine.
Pease check.
Thanks & regards,
Amit

Production Order Confirmations by Work Center

Using COOIS, I can see confirmations for production orders by work center, but it doesn't give me the option to display the material number and material number description.
Is there an easy way to create a quick view for this?
Could someone help me out?

Hi,
Try with tcode co28 ,choose order header
Enter order category as production orders.
Enter the profile as standard one
Enter order number and execute.
select the displayed order order number and choose the ALL Fields icon.
OR
Try with tcode co28 ,choose order header
Enter order category as production orders.
Enter the profile as standard one
Enter order number and execute.
Choose the Fileds icon and selet the fileds you need and save .
Regards
nandha

Capacity Planer Group --- Maintenance work center

Hi,
I have a query
1. like do we have to create capacity planner groups same as the planner groups in equipment master data....Do they have any link??
2. What would be the start time and end time in maintenance work center, for 24 hrs open manufacturing industry with 3 shifts???
thanks
DM

Hello Deepak,
There is no relation between capacity planner grp & Maintenance planner group...These are 2 different things..
Now the work centers can be defined for the technicians if HR module is not implemented...
To perform the capacity planning for the technicians, there daily working hrs must be maintained in the system..Though the maintenance is working for 24 hrs,Single technician cannot work for entire 24 hrs..
Hope this will help..
Thanks

Confirmation of a formula in work center in the confirmation

Hi All,
          I want a result of a formula of work center of particular operation in confirmation. Can any body guide the steps

Hi Vachanala,
                       1. You create a standard value parameter in OP7B which is to be used in the formula.
                       2. Your standard value key created through OP19 should be containing this parameter which you have created and this key should be assigned in the basic data in the work center. Check generate box before saving the SVK.
                       3. You define the formula which uses this parameter through OP21. You should check allowed for calculation box.
                       4. In the costing tab of work center you maintain the formula against this parameter. If you want to cost it In that case and should also maintain an activity through KL01 and maintain a price for it through KP26. This activity should also then be maintained against the parameter in the costing tab of work center. Also check the reference indicator against the parameter.
                       5. Assign this work center to the operation in routing.
                       6. Create order, release and do confirmation, if you click actual data system should propose you the quantity as per calculation. Cost will be calculated if you maintained as per point 4, in the planned cost against the order.
                           Please check and revert.
Regards
Sm.

Work Center Group Confirmation

Similar Messages

Maybe you are looking for