Work center repository navigation

Hi,
Anybody please help me, What is work center repository and how can we use for navigation between the BSP component, if anybody have documentation on CRM Web UI please forward to me.
Regards,
Sivareddy.

Hi,
I would suggest to post your question in [https://www.sdn.sap.com/irj/sdn/sapsolutions-forums], forum <SAP CRM 2007>, as this is fitting you topic rather than the current one.
Regards,
Wolfhard

Similar Messages

How to define default Work Center in WebUI?

Hello,
We want to change the default Work Center in Web UI (the first one that will be opened when the system is started).
How is it possible to perform it?
Thanks in advance,
Sergey

Hello Sergey.
If it's still relevant for you. You can change default work center in navigation bar profile of your business role (tx. CRMC_UI_NBLINKS). On the first screen (where all navigation bar profiles are displayed) there is a third column "Link ID". Here you put link id of the default Work Center.
Hope this will help.

Wage group,Suitability in work center...................................

Hi all,
How the wage group and suitability is connected to CO module.....
please reply me...................'
tell me integaration with other modules too...................

Hi Jerry,
Please refer to the following blog and check whether you followed all the steps:
/people/harikrishna.sunku/blog/2008/12/18/work-center-and-navigation-link-creation-in-crm-2007
You basically need to ensure that your custom work center is assigned to a navigation bar profile; and this navigation bar profile is assigned to your business role.
Regards,
Shiromani

Navigating directly from ECC(ABAP) to CRM UI Work Center/Link

Hi gurus,
I tried searching and couldn't find a relevant answer so I hope someone can help. We'd like to go directly from an ECC custom transaction we use to view our inventory and navigate directly to a specific work center/logical link within the WebUI that will display some custom development we've done to streamline the quote entry process. Parameters are passed from the inventory transaction and then pre-populated into a custom screen we developed.
I've seen tons of documentation on launching R/3 transactions from within WebUI and I know how to go directly to a specific object using a formatted URL but I can't find any info on going directly to a specific work center menu entry and/or a direct logical link from within ABAP.
Can anyone shed some light on this? Thanks in advance.

Hi James,
I am working on some navigation issue myself and posted [this|Direct URL access to a component usage; in the forums today. It might just help you:
SAP has at least some documentation on this one. It is freely available form the [Service Market Place|https://websmp203.sap-ag.de/crm-inst]. [DirectLink|https://websmp203.sap-ag.de/~sapdownload/011000358700001715762008E/Cookbook_Ex_Comp_CRM2007.pdf]
In the document mentioned above is a way to create a URL to the WebClient directly opening a specifc UI Component in the UI Frame.
You could even open this one in an HTML control inside your transaction.
cheers Carsten

How to create a copy of a Work-Center?

Dear Experts,
in SAP CRM 7.0 i have made a copy of the Work Center SRV-MD. The name of the copy is: ZSRV-MD. The most important data can be found in the following table:
Workcenter Standard Workcenter Copy    Logical Link Destination ID     Component
SRV-MD                  SRV-MD             SRV-MD-WC     SRV-MD-WC          WCC_SRV_ACC_PRO
SRV-MD                  ZSRV-MD             ZSRV-MD-WC    SRV-MD-WC          WCC_SRV_ACC_PRO
I want to use both Work-Center for the same Role. My problem is that I want to define for both workcenter different Logical Links. But when I change the links on the first workcenter it is changed too for the other one.
Do I have to create a Z-Component to avoid that? The problem might be that the same Destination ID is used which is leading to the same Component?
Best Regards
Oliver

Hi Experts,
under:
Customer Relationship Management -> UI Framework -> Technical Role Definition -> Define Work Area Component Repository
I have defined a a new Target-ID (ZSRV-MD-WC) for the created Z-Component: ZWCC_SRV_ACC_PR (Copy of WCC_SRV_ACC_PRO).
Then under:
Customer Relationship Management -> UI Framework -> Technical Role Definition -> Define Navigation Bar Profile
I have created a new Logical Link with the following data:
Logical Link ID: ZSRV-MD-WC
Type:                B Work Center
Target ID:         ZSRV-MD-WC
This Logical Link I have assigned to the Z-Work-Centre:
Work-Center ID: ZSRV-MD
Logical Link:       ZSRV-MD-WC
But the problem is that the system still is calling the Standard Component WCC_SRV_ACC_PRO. In which method I can make a debug or look for the problem?

Buyer Work Center Document Builder Error in Purchasing

Hi Gurus,
I am getting this error in BWC(Buyer Work Center) for PO's which can be updated by using Requistion Tab choosing update in document builder for existing PO's.
next sequel number is not populated in update document builder page for PO's. did any one faced this kind of problem. This is not happening with all of the user systems, only with few that's wierd.
Navigation:
Purchasing Super User >> Buyer Work Center >> Requisition
Here selecting requisition number to be added/updated to existing PO's. once we do "Add To Order" update for PO in document builder.
Immediately throwing an error below, actually it should take next line to existing PO, its not happening.
*"You cannot combine this line with another line because the Item Numbers are different."*
What would be cause for this, I tried in Metalink oracle support to find something on this, But No luck.
Please advice, what steps to be taken to resolve this.
Thanks to all..

user8822881 wrote:
Hi Gurus,
I am getting this error in BWC(Buyer Work Center) for PO's which can be updated by using Requistion Tab choosing update in document builder for existing PO's.
next sequel number is not populated in update document builder page for PO's. did any one faced this kind of problem. This is not happening with all of the user systems, only with few that's wierd.
Navigation:
Purchasing Super User >> Buyer Work Center >> Requisition
Here selecting requisition number to be added/updated to existing PO's. once we do "Add To Order" update for PO in document builder.
Immediately throwing an error below, actually it should take next line to existing PO, its not happening.
*"You cannot combine this line with another line because the Item Numbers are different."*
What would be cause for this, I tried in Metalink oracle support to find something on this, But No luck.
Please advice, what steps to be taken to resolve this.
Thanks to all..Please see if (nable To Combine Multiple Requsition Line Into Single PO Line After Release 12 Upgrade [ID 1472044.1]) helps.
Thanks,
Hussein

How to add SAP BI or BEx Reports on Reports Work center link in WEB UI

Hello All,
I have question, How to add SAP BI Reports on Reports Work center link in WEB UI? I found an article on SDN but could not understand. Please provide all steps in detail.
Thanks,
BMW

Hi BMW325ci (I hope you have the latest model )
Here are the steps:
1. have the BI team create a webversion of the report. (not required when calling a query directly
2. create in SPRO --> CRM --> UI Framework --> UI Framework Definition --> Display SAP NetWeaver BI Reports in CRM the reports you want to display
     e.g. BI Report ID         Z_DYBE_GROSS_SALES_CUST_MAT
            Long description              Revenue per customer/materialgroup
            BI Object Type                  HT Template 3.x (depending on your BI version)
            BI Object Key                 ZWCOPALM01_PPS_REVENUE_ARTG_V2
            BI System                      (when using the webtemplate, nothing needs to be filled)
3. create in SPRO --> CRM --> UI Framework --> Technical Role Definition --> Define Navigation Bar Profile
    a. A logical link for each BI report.
       e.g. Logical Link ID ZDB-ACC-DE
              Type    D BI report
              Target ID       DISPLAY
              Parameter       Z_DYBE_GROSS_SALES_CUST_MAT
              Parameter Class CL_CRM_GEN_UI_BI_UTIL
              Icon Name       GC_ICON_REPORTS
              Title           Revenue per customer/mater.
              Description     Revenue per customer/materialgroup
   b. Include in the relevant Report Work Center Link the logical links you have created in step 3.a
      e.g. Group ID        SLS-ACC-RE
             LogLinkID ZDB-ACC-DE position 80
   c. Make sure that your work center link is assigned to the work center
      e.g. Work Center ID SLS-REPORT
             GroupID SLS-ACC-RE position 10
   d. Make sure that your work center is assigned to your navigation bar profile
at this moment the report is linked to a standard workcenter, which can be shown on the webui.
4. In your business role, you need to of course make sure that the flags on the workcenter entries are set on show in menu and directly.
This should give you the complete picture.
KR,
Micha

Combine Work Center Link Groups in one Work Center

Hello Experts,
our requirement is to combine the Work Center Link Groups of several Work Centers into one Custom Work Center.
For example, the work centers Knowledge Management and Managing Operations. (IC-MGRKM, IC-MGRMA)
They have Work Center Link Groups like IC-MGMA-CR or IC-MGKM-CR. Now we defined an own work center Y-IC-MGRMA and assigned these links groups (and others) to the Work Center.
However, when we open the Work Center we only ever see links of one work center type (for example only the links of Knowledge Management).
Is it even possible to combine the different work centers into one big work center with many links? What would we have to do to achieve this?
Help would be appreciated!

If I am not wrong you are assigning standard work Center Link Groups like IC-MGMA-CR & IC-MGKM-CR to newly created Work center Y-IC-MGRMA .If I try the same, all related links can be made visible. The process you are following is correct.
You may have confused with the nomenclature of your work center ID - Y-IC-MGRM. Please look into the "Group ID" column, if you are assigning standard group links as mentioned above you will find three logical link ID for Knowledge management & two for MGMA too. In short if five logical links are available in second level navigation then things are correct at you end. I tried it and its working fine.
Pease check.
Thanks & regards,
Amit

Change the default work center in CRM 2007 webclient

Hi all,
With IC_AGENT role,the default work center is 'Account identification'.When I click the buttone'end' ,it jump to account identification work center ,how to change this default,config or coding ?
Thanks a lot!
Best regards,
LeKa

Hi Ashwin,
In our ZIC_AGENT, I have defined the navigation bar that contained the 'IC_BPIDENT:account identification' work center. This is as default pages whatever ending phone call on webclient or cancell any action, it also jump to 'IC_BPIDENT' view.
I want to enhance the function, when i end a call from webclient ,it could jump to 'call list' work center instead of 'account identificaton'.
did you have any ideas ,please tell me.
Thanks.
Best regards,
LeKa

Validation on Work center link

HI All,
After confirmed the Iobject, I want to do some validation to prevent the creation of service order by clinking on work center link ( Left side navigation bar area ) and want to display error message.
Can anybody please help me how to achieve the functionality.
Thanks.

Hi Nishit,
I could not understand what do you mean by "Iobject".
If it is specific to some authorization based on the links then yes there is a way through defining parameter class in the logical link.
Please give us more information about your issue so that we can try to help you. Screenshot would help to understand better.
Regards,
Jotsaroop Singh

How to make the IC_EMAIL work center working?

Hi Gurus,
I am testing the email funcation of SAP delivered business role UTIL_IC (Utilities IC Agent). The email profile is 'DEFAULT' with email provider as ICI. The work center is IC_EMAIL.
After I clicked the email option under communication through the navigation bar, the email screen was loaded. However, there is no any response after I clicked the 'new email' button (the BP was confirmed). Also the screen was frozen in the email screen and it did not go anywhere no matter what else option I chose in the navigation bar.
I checked the naviagtion bar profile UTL-IC and IC_EMAIL is maintained in the generic outbound plug mapping as below.
IC_EMAIL Display IC_EMAIL2 (LogLinkID)
IC_EMAIL Create TEMAILCR (TargetID)
Could you help to shed some light on this? Also does anyone know which component is behind this IC_EMAIL screen (I could not choose any field in this screen to press F2)?
Thanks in advance!

Hi,
This is solved by note 1281208.
Thanks,
Edited by: Zhijie Kong on May 24, 2011 6:06 PM

Work Center sub items postition change

Hi ,
I am new to CRM. Got a requirement to change the positionof the Work Center sub items.
I could able to change the main work center positons (Using t.code crmc_ui_nblinks) .whereas for the sub items, i do not know where to go & change the positions. Appreciate anyone's help.
Thanks
Sekaran

Hi,
Each work center internally contains no of groups, each group contains no of logical links ( sub levels ).
First we need to give position for groups. ex. search, creates are groups -> we can enter positions for this in the same trx crmc_ui_nblinks .. click on the workcenter and search for ur work center and select it . Click on second level navigation and change the position.
For changing the position for logical link:
go to the Define Work Center Link Groups and search for your group id and click on the second level navigation. Here you can change the position for the logical link ( sub items ).
Hope it helps.
Regards,
Sandeep Kumar B

Work Center Component

Hi gurus
We need to change the title of the Work Center u201CMaster Datau201D, but we just can't find the component of this workcenter, in order to see the implementation class and change the description.
Does anybody can help me?
Best regards
Ale

Hi Ale,
did you already try to change the customizing for the workcenter?
Go to the ta spro->CRM->UI Framework->Technical Role definition->Define Navigation Bar Profile
Go to define WorkCenter, choose MD-ALL and change the title.
Best regards,
Erika

Work center screen sequence change

Dear Guru,
Can you guide me how to change the screen sequence of work center.
Regards,
Sanjay Sahoo

Dear Sandeep,
My requirement to change in sequence in Tab page.
I changed the sequence in OP13, But screen sequence does automatically change as per sequence maintain in OP13.
If we use the navigation tool, then only system take you to the next Tab Page which we maintain in the OP13.
Can it be possible to diaplay the Tab Page sequence as per OP13 at the time creation of work center?
Regards,
Sanjay Sahoo

Buyer Work Center performance and persoanlizations

Hi All,
we are currently on R12.1.3 and we've few issues with the way the Buyer Work Center is working
1) The performance of BWC is very slow. Navigating from one field to another field takes at least 5seconds. For fields like project, task, org etc the form takes 10seconds also. Combining all this, creating a PO with 10 lines takes about 10-15mins for our users. Is this normal? Are there ways to improve the performance?
2) There are multiple screens to navgiate. First the users start off with header then to line summary and then to line details/schedules/distributions etc. Is there a simple way to make all information available in one single page so that the users do not have to spend time navigating from one screen to another screen? This will be really helpful for users creating POs with more than 10lines. I'm thinking of persoanlizing the PO line summary screen and make POET available there. Has anyone done any customizations to the PO line summary screen?
I'm sure you must have faced similar issues with your clients. Please let me know if you handled these issues.
Thanks,

hadimulam wrote:
2) There are multiple screens to navgiate. First the users start off with header then to line summary and then to line details/schedules/distributions etc. Is there a simple way to make all information available in one single page so that the users do not have to spend time navigating from one screen to another screen? This will be really helpful for users creating POs with more than 10lines. I'm thinking of persoanlizing the PO line summary screen and make POET available there. Has anyone done any customizations to the PO line summary screen? Same question was asked by my client, I recommended them to go directly to the "Distributions" tab and search for the PO. Actually most of the key fields from the header, lines, shipments and distributions are available at the distribution tab and you can add many more fields by clicking on the "Add Another" field. Moreover, you can save the final view for future reference so that you don't need to add the same fields again.
Yes, it is a workaround, as you will see repeated lines for multi shipment and distribution scenarios but single shipment - distribution scenario will be OK.
Thanks,
PS.

Work center repository navigation

Similar Messages

Maybe you are looking for