Work Center Routing

Hi Gurus,
Please can you explain in detail how Work center routing functions with T- Codes?
And how it works?
Regards,
PMAddi

Hi,
For details of Work Center in routing u need to float ur query in PP forum. PM its work center and maintenance task list.

Similar Messages

Confirmation - Work Center - Routing

Hi all,
I try to understand routings. When i try to confirm an operation with BAPI_PRODORDCONF_CREATE_TT for a work center which is not defined in routings, it returns no problem. But it is not in routing. How can it be confirmed? Or what changes when define the workcenter and confirm with it?
Thanks,

Has it relation with standard times ?
Regards,
techmaster

Routing & Work Center ALE TCODE

Hello All,
What are tcode to send WORK CENTER & ROUTING using ALE?
Points will be awarded.
Regards,
Dilip

For wrok center :HRKK1WRKC
,LOIWCS01,LOIWCS02
PPCC2RECWORKCENTER01 Send work centers to PDC system
WORKC2 Workcenters in CC2
WORKC3 Work centers in CC3
WORKC4 Workcenters in CC4
LOIROU01 Master routing
LOIROU02 Master routing
ROUTING_CREATE01 Creation of a routing
Hope this`ll help you ..
Thanks

All default routing value has to be changed, while changed the work center in production order

Dear friends,
our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routing.At present we have to enter the manually change the W.C as well as set up time and operation time enter manually.Any other option to do the automatically capture value from routing while change in Work center in production order.pl help me on this.
Thanks&Regards
Sabhapathy R

Hi Rahul,
Thanks for reply. I am maintained in diff value maintained routing , Ex :First routing i have work center 'X' value maintained as a setup time in 15 Min's and operation time 10 Min's
second work center 'Y' I have maintained as set up time 10 Min's and operation time 30 Min's,
Now I want to change the work center in production order as a 'Y' so whatever value maintained in routing , it has to be changed automatically (10 min's and 30 Min's), but system will not change only old value only picked (15Min's AND 10 Min's).
Now I think you get to know what the client requirement, kindly do the need full.
Regards,
Sabhapathy R

Request for detailed acts to upload Work center, BOM, Routing data in LSMW

Hello PP ANgels,
Request for detailed actions to upload Work center/Resource, BOM, Routing/Recipe data in LSMW.
Thanks in advance

Sanjay,
In the forum I found that you had used some "drops", that require a password to view.
In these forums, the only links I post are public (help.sap.com) and from SAP support (service.sap.com/support). SAP Support is mostly available only to customers and partners of SAP. If you meet these criteria, and need a login for the SAP support site, contact the license administrator for your company's SAP licence (this is usually a Basis person). If you cannot locate this person in your company, contact Service Marketplace directly (service.sap.com/mp). Alternatively you can contact your local SAP Sales office and speak to your account administrator.
Maybe it would be a better idea to group all standard solutions in one place.
I expect it will be so...in Nirvana. Here, life still entails suffering.
With respect to your detailed questions, I would have a hard time answering, I have never used recordings in LSMW to create work centers, I always use standard batch/direct input. I suspect that the VGEXX items are the units of measure from CRHD, I suspect LARXX items are activities from CSSL, and I couldn't comment on FORXX items without doing some research.
This is the SCM PP forum. You might get more answers posting this in the ERP PP forum SAP ERP Manufacturing - Production Planning (SAP PP) , since work centers/routings/recipes/BOMs are more or less irrelevant in SCM.
Sorry I couldn't be of more assistance.
Best Regards,
DB49

Read Routing and work center details from transfer order

Hello
I am using transaction LT31 to print a form for the transfer order.
The customer wants me to print a field that is in the work center details of the routing for this material and plant.
I can see this data with transaction CA02 where i enter material and plant,and then the work centers are beeing displayed.From here i can double click on the work center and see the field Supply area that i have to print.
My answer now is,how to read details on the work center starting from my transfer order number.Which is the table connection between transfer order table LTAK and the tables where i can find the work center details.
Thank you

I have found the solution:
ltak-tanum = mseg-tbnum
read aufnr from mseg and go to afko
mseg-aufnr = afko-aufnr
read plnnr from afko and go to plpo
afko-plnnr = plpo-plnnr
from plpo read arbid and go to crhd
plpo-arbid = crhd-objid
from here,we can find the arbpl and the field that i was looking for PRVBE

Tables for routing (for work center)

hi friends,
I am doing report on routing but i did not get value for work center i got tables CRHD CRCA CRCO CRHH CRHS CRTX KAKO KAZY .
i try to get result by using link with PLPO and PLKO.
in TCode CA03 when i see the technical attributes it stors the dat ain structure PLPOD but i am unable to use it.
kindly can anybody tell me how to work center.
thanks & regards
Bhupinder Singh Kaler

Hi Bhupi kaler,
try to link CRHD and PLKO with WERKS ( Plant ) field ane get the ARBPL ( Work center ).
Best regards,
raam

Routing and Work Center

My Friend,
What tables and fields I can user to create a report with link ( Work center X Routing X machine times X labor times) I need of list with this information to analysis.
I need comparete the times SAP information(Routing) verses Real Operation ( production line) by list.
Thank you for any help.
Best regards
Armando

Hi,
You should have searched or posted your question in production planning forum.
For example, check the link [Labour time and Machine time - production order table |Labour time and Machine time - production order table]
Regards

Update Routing data after change in Work Center

Hello All,
I have just modified the Costing Data for 100 Work Centers CR02, setting a new "Activity Type" and "Activity Unit". But the Routing Data CA02 does not get updated correspondingly. I would like to ask is there any standard program which can help me to do the mass processing as to update the data to the corresponding routing?
Thanks.

1) You can change as per Mr Anupam sharma Said
or
2) YOU can also Update the data IN CA85N
In selection criteria enter the respective work center and Plant
and In new Value Give
Same work center, Plant, activity value , Unit and activity type
execute
select the all the work center and then click mass change
Edited by: Sundaresan . E. V on Nov 12, 2010 10:25 AM

FM to get work center information from routing

Hi all,
Is there any FM to get work center information from routing?
Points assured.
Thanks and regards,
Nilesh

Use This FM
CR_WORKSTATION_READ_ROUTING,ROUTING_DISPLAY
Use table CRHD ,MAPL
Please reward if useful.

Work center's description copy automatically in operation Routing

Hi all,
Could anyboy tell me where point of spro is to customize that work center's description is copied automatically in the operation Routing's description?
I try to search for it but I don't find it still.
Thanks in advance

Hi,
A suggestion:
In CA10, create a key say Z1 & give the description same as work center's description.
Now go to CR02 & for the work center in default values tab, assign the key to the field Standard Text key.
Now when you create a routing which uses this work center, the operation description will contain the work center description.
Regards,
Vivek

Work Center Hierarchy and Routing

Hi,
I would like to know what exactly Work Center hierarchy mean?. Where is it used. In Routing, we maintain Sequence of operation along with workcenter where this operations are performed . Would like to know does work center hierarchy is linked to sequence maintained in Routing?. Thanks

Hi,
Any one can explain me the use of Workcenter Hierarchy?. In Routing, we maintain the sequence of operations. Does Routing and Workcenter Hierarchy has relation?. If Yes, what is the relation between these 2.
Thanks in advance

Fields for Super BOM, Work Center & Super Routing for Variant Config

hi! gurus,
Please can you give me mandatory fields & values for Super BOM, Work Center & Super Routing for Variant Config
thank you

Hi,
In the Super BOM you need to maintain the object dependencies.
Workcenter fields are as usual for other production processes.
Also you can use search option in the forum to view the threads posted in the past. There are many posts related to variant configuration.
Regards,
Senthilkumar

Designing Work Center & Assigning in Routing For Textile Industry

Dear All
There are around 20 Looms in weaving.As per clients requirement to map indvidual Loom efficiency each loom is considered as indvidual work center.In routing its possible to assign only one work center.
Kindly suggest me how to map this scenerio.The client requires machine wise output.Should i raise 20 Production orders for indvidual Work centers.
Regards
Jay

hi,
i am sending the information about
Maintaining Individual Capacities in the workcenter,
Prerequisites
Individual capacities are used in capacity planning for more detailed resource planning. For instance, you can divide a machine capacity into several individual machines and maintain an available capacity for each machine. Capacity requirements can then be distributed among the individual capacities. If you do not maintain an available capacity for an individual capacity, it is calculated from the operating time of the capacity to which the individual capacity has been assigned.
Individual capacities have the same capacity categories as the capacities to which they are assigned.
In order to be able to create individual capacities the CapCatPers indicator for the capacity category must not be set in Customizing.
Procedure
Assigning Individual Capacities
On the header screen choose Goto ® Individual capacities.
The Assignments to Individual Capacities screen appears.
Define the individual capacities.
Maintaining Available Capacities for Individual Capacities
In the Assignments to Individual Capacities screen place the cursor on the individual capacity whose available capacity you want to maintain.
If the Maintnd indicator has been set, then an available capacity has been maintained for this individual capacity.
thanks
sbabu

Control Key in Work Center and Routing

Hi Gurus,
Can anybody tell me what is the difference between Control Key we are providing in second tab of work center and the control key we input in routing.
can i use same control keys at both the places.
Regards,
Anand.

Hello,
Control Key in Defaut value keys screen is mainly for defining how the work center will be used in routings.
Almost in all the PP we define same Control key to the work center as well in the routing.
For example in work center control Key PP01 is used to define Routings/Internal proc. activities. When we go to the routing screen even if we do not see our components, work centers or control key we have to manually enter these details ans here control Key will remain the same as it was in Work center.
No. of individual capacity defines how many machines are there of the same type in the work center. E.g if I have 5 CNC machines then I will make One work center and in capacity screen I will put 5 as No. of individual Capacity.
Regards,
Piyush

Work Center Routing

Similar Messages

Maybe you are looking for