Work Ceters error in change analysis: "No config stores found"
Hello,
I have configured E2E diagnostics succesfully, but when i try to view change analysis (Root cause analysis) for my ECC development system, an error appears:
"No config stores found for 'EC1 0020256704 ABAP or no changes found"
Any of you have any idea about this problem?
Thanks and regards
Carlos
Hi Guys
In order to solve this issue , please refer to this SAP Note below
1392544 : E2E Change Analysis - Wrong "No store or no changes
If this above doesnt solve the issue then please follow these steps belo
w.
1.) Make sure the JAVA and ABAP stack are relevent as per this note belo
w
1274287 : End-to-End Diagnostics SP18(EHP1)- SP19 - SP20 -
2.) Please make sure that you have applied the central note
1334252 SAP Solution Manager - Basic functions (SP20/21)
and check if you are able to activate the following objects in
SE80 via the context menu.
Classes: CL_WD_COMPONENT_ASSISTANCE
3.) Make sure the user SOLMAN_ADMIN has profile S_SMDIAG_E2E
3.) Afterwards, for system ID in subject . make sure the main Instance is been sele
cted as per this document
https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000703907
&_SCENARIO=01100035870000000112&_OBJECT=011000358700000074392009E
4.)
Run the Managed Setup wizard from SOLMAN_SETUP -> Managed System
Configuration, step 4. Configure Diagnostics.i.e the Main Instances that should be selected in
the wizard step.Ensure the wizard runs with no errors.
I am sure this will fix the issue
Best Regards
Jai Wardhan
Similar Messages
-
RCA error in change analysis "No config stores found "
Hi,
I have configured E2E RCA in solman.
In solman_workcenter t.code. RCA -> E2E ->select system->if i click change analysis it is showing errror "No config stores found for 'GRD 0020251123 ABAP or no changes found' '' .
but if i click trace, exeception and workload i get graph.
i checked [Work Ceters error in change analysis: "No config stores found"] , but still i get the error.
Plz help to solve the issue.
Regards,
Karthikhi
why dont you check all the lists given by JAI in the thread
[Work Ceters error in change analysis: "No config stores found"|Work Ceters error in change analysis: "No config stores found"]
jansi -
Reg : No config stores found and extractors missing in EFWK administration
Hi,
We have configured RCA for ERP Production system.No tabs are apperaing when we click on change analysis such as Overview tab,EC6 ABAP Stack tab.System also throws an error message "No config stores found".
Also when I check RCA -> common tasks -> Extractor FWMK Administration -> Managed system,the following extractors are not shown such as E2E_CCDB_TO_CUBE,SDF/DUMP_EXTRACTOR,/SDF/SYSLOG_EXTRACTOR,E2E_ME_RFC_ASYNC
Kindly help.
Regards
ShailajaDear Shailaja,
You must make sure that your Managed System Configuration is done in transaction solman_setup for this managed system.
Once everything is executed and in green status, including the Managed System Setup Wizard, the extractors will be working properly for your system.
Best regards,
Guilherme Balbinot -
AE Work Flow Error in creating request. Path Not Found
Hi There,
I am working on GRC 5.2
I Have lot of questions regarding this tool...
I am getting this error when i am trying to submit a request..
Please help me in configuring the AE and guide me with the basic setup.
Work flows and rest of the things..
Thanks in advance
RaghavBuddy,
I have done config using Guide...
I am able to submit request from the GRC end ...i am getting this below status message
Request successfully got created and got approved with provisioning. Request no : .
Approval Path Status
(Status : APPROVE)
1. Auto-Provision ( Status : Approved )
[system
But nothing is changes in ECC system..as per the above request when the system complete the request User ID should be created automatically in the back end but its not happenning.
Please guide me -
Hello,
I'm using the Labwindows/CVI 2010 Full Development system, in a Windows 7 professional 64 bits computer. So, The analysis library is installed (see in the attached file), and the Option Analysis from the Customize library menu is selected.
I'm using several function from analysis library (WhiteNoise, MaxMin1D, LinFit, etc). The projects in 32 bits work very well. In 64 bits project there is not linkage error, the exe is created, but there are errors like that:
Function WhiteNoise: (return value == -5093 [0xffffffffffffec1b]). The analysis library DLL was not found or could not be loaded.
the same for the other analysis library functions.
how to do to use the analysis library in 64 bit projects, it's the analysis library 64 bit compatible?
thanks in advance
Solved!
Go to Solution.
Attachments:
AnalysisLibraryInstalled.jpg 220 KBHi DansatB,
thanks you for posting on this forum !!
Yes, the advanced analysis librairy is 64 bits compatible. i can do the test on my computer on CVI 2013.
i think it will be great to correctly uninstall your CVI version ans all install again.
Regards
Aurélien Corbin
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Cahiers de vacances de NI
Présentations en ligne : 12 fondamentaux à réviser, du 9 juillet au 29 aoû... -
Why do I get Math Exception Error - the underlying analysis dll was not found
I can find this question in the list, but the answer is about .NET.
I am only using MFC on MS2010. Anybody know which dll I should include?
ThanksHello Rick -
My guess is that you've only installed the MFC 2010 support, but not run through the actual MStudio installer. The following instructions come from the "Installing C++ MFC Legacy Support if Measurement Studio 2009 Visual C++ MFC Support for Visual Studio 2008 or Measurement Studio 2009 Visual C++ MFC Support for Visual Studio 2005 Is Not Installed" section of the MFC 2010 support readme. Please make sure you've followed these instructions, I think it should resolve the errors you're seeing.
Complete the following steps to install C++ MFC Legacy Support on a machine that does not already have Measurement Studio 2009 Visual C++ MFC Support for Visual Studio 2008 or Measurement Studio 2009 Visual C++ MFC Support for Visual Studio 2005 installed:
Log on as Administrator or as a user with administrator privileges.
Install Measurement Studio 2010 or later .NET support for Visual Studio 2010. You can perform a minimal installation—de-select Help, Examples, Visual Studio Integration, Additional Features, and Device Drivers from the installer feature tree. This installs the underlying dependencies required by the Analysis and DataSocket Visual C++ MFC class libraries.
Double-click the MStudioVS2010CppLegacyR2 self-extracting .exe file.
Enter the password provided in the email you received from National Instruments validating your use of this product and click OK. The file automatically extracts to Program Files\National Instruments\MeasurementStudioVS2010\VCNET on a 32-bit operating system or Program Files (x86)\National Instruments\MeasurementStudioVS2010\VCNET on a 64-bit operating system.
Navigate to the NIACTIVEX folder within the extracted VCNET directory and double-click setup.exe to run the NI Measurement Studio ActiveX Control Installer. Follow the instructions that appear on the screen. You can use the same serial number for this installer that you used to activate Measurement Studio 2010 or later. This installs underlying dependencies required by the User Interface and 3D Graph class libraries. The R2 version includes an updated NI Measurement Studio ActiveX Control Installer; National Instruments recommends using the latest version of this installer.
NickB
National Instruments -
On a Mac, did digital download from B&H. Has never worked because error while changing modules. Did EVERY step in forums. Nothing. Still under manufacturers warranty, need to talk to actual customer rep but only gives me option to post question on forum. So far this is more than annoying to have to deal with.
Hi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771> -
Error -43: a file could not be found
Hello. I'm trying to export an mov file from quicktime pro, but I keep getting this error everytime. I have been able to do this export as of a few weeks ago, now it doesn't work.
Error -43: a file could not be found
I'm trying to export an mov to an mov to correct a dimension issue. Again, this worked perfectly in the past.
I have tried moving files to different drives, the desktop as well. Still getting the same error.https://discussions.apple.com/message/12563573#12563573#12563573
-
Hi,
I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?Hello there hastibahreini,
It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Error in work flow wait for change event
Error in work flow wait for change event of business object bus1014, Actually this business object is triggering for two transaction one is me21n and another is c201 . am trying to create fork with two branches one is create and another if change occurs wait will trigger, bt when i trigger work flow controll is not after fork, it will stop in fork only. and am not getting my workflow container variable getting instantiate, am getting error in wait. please any one get out of me in this
Hi Sangeetha
What is LV_MATERIAL? is it a BO container element? or a class element or a just a simple variable?
Error message is clear, you are trying to evaluate LV_MATERIAL but it does not contain a value.
This is a custom workflow as it begins with WS9xxxxxxx... what is LV_MATERIAL used for? what are we expecting it to hold? maybe, from event to workflow binding we can pass the value to it.
Please share the following:
1) Definition screen shot of LV_MATERIAL
2) Screen shot of The step where it is first used - from SWDD
3) Screenshot of Event to Workflow Binding
4) name of your base Business Object (seen in the triggering events tab of the WF template in PFTC)
5) What is the corresponding variable for that BO in your workflow container
6) Screen shot of WF definition from SWDD - please identify the step going in error in that screen shot
Regards,
Modak -
Error in extractor for Change Analysis
Hi experts,
I have already set up Root Cause Analysis in SAP Solution Manager and I am facing an error with a Chage Analyssis extractor.
Solution Manager 7.0 Ehp 1 SPS24
Managed System where error is: DES - ECC 6.0 (Implemented part of EhP1)
SAP_ABA 701 0006
SAP_BASIS 701 0006
PI_BASIS 701 0006
ST-PI 2008_1_700 0002
SAP_BS_FND 701 0006
SAP_BW 701 0006
SAP_AP 700 0020
WEBCUIF 700 0006
ST-A/PI 01M_ECC600 0000
When I run "Extractor FWK Administration" from Root Cause Analysis workcenter and I go to managed system DES:
In Extractors
CHANGE ANALYSIS SAP BASIS 7.01 E2E_CCDB_TO_CUBE ......
If I mark this row and I select log I could see the following error:
E2E_CCDB_TO_CUBE - COMPV NOT FOUND IN LANDSCAPE-API FOR LONG_SID INSTALL_NUMBER
And If I go to Log Details
Postdataloader E 8 E2E_CCDB_TO_CUBE - COMPV NOT FOUND IN LANDSCAPE-API FOR LONG_SID INSTALL_NUMBER
Extractor E 8 COMPV NOT FOUND IN LANDSCAPE-API FOR LONG_SID INSTALL_NUMBER
I have been surfing on internet but no clue what to do.
Please help.
Thanks in advance.Go to http://service.sap.com/diagnostics => Media Library... => SAP Solution Manager Landscape Setup Guide =>
Check page 17, chapter 4.4 SAP ERP 6.0 / EhPx for SAP ERP 6.0
Follow the instructions and reply the results. -
Error while accessing E2E Change Analysis via SMD
Hi All,
I am having below mentioned error while accessing E2E Change Analysis via SMD.
Error loading template 0TPL_0SMD_CA01_Q0001
Notification Number BRAIN 276
Let me know if you are aware about the solution.
Regards,
Vinit PagariaIs the Queries and templates activated completely in BI-content/Client?
Please check the same and if needed activate the queries again by running report :CCMSBI_SETUP_E2E
Also refer to the SAP Note 1342231 - ST: Manual actvtn. of BI Content for E2E diagnostics SP18-22.
Revert for any issues pls.
Thanks,
Jagan -
MBAM 2.0 SP1 Self help website error after changing name of website on IIS and web config
guys
i need your help here , i have fully operational 3 tier enviroment with config manager ,when i created this enviroment i only used the fully qualified domain name of the web server and now i need to change the name in order to comply with company website
names.
now i have went to ISS and changed the name on the bindings and changed also the web config file and this resolved the helpdesk website as it can now talk to backend and retrieve the key .
my only issue now is the self service website , i changed the web config for it as we and when i try to retrieve the key it says an unknown error has occured please contact IT , am not sure where else to check , please helpIf I would be in your place, i would rather have created an alias for the existing FQDN with that of the newer one into the on-premises DNS Server.
Create a Fully Qualified Domain Name (FQDN) in DNS that users and group policy settings will use to connect to the MBAM server. For example:
http://bitlocker.contoso.com.
Open DNS manager.
Expand DCServer_Name>>Forward lookup Zone>>Domain_Name.
Right Click on domain name and choose New Alias (CName).
Provide the alias name(bitlocker.contoso.com) and the FQDN for the target host.
Is the web site for User Support service is accessible?
Gaurav Ranjan -
Unknown server error after changing password, solutions on support side don't work
After changing my password I get the "unknown server error". I already tried the solutions on the support side, but it won't work.
My system is Win 7.
I'd be so glad for any ideas,
thanksThanks for your answer. Yes, i already tried these solutions (more than
once!) but I still get the error and can't connect to the cloud.
I'd be so glad for any ideas!
Thanks in advance, take care,
Ulinna
2013/10/11 Arpit Kapoor <[email protected]>
Re: Unknown server error after changing password, solutions on support
side don't work created by Arpit Kapoor<http://forums.adobe.com/people/Arpit+Kapoor>in
Adobe Creative Cloud - View the full discussion<http://forums.adobe.com/message/5753065#5753065 -
[solved] openvpn connection no longer working, tls error
Hey!
I have a strange problem. The same setup was working for months, nothing changed. Perhaps it`s due to an update and you guys can help me. I can`t establish a vpn connection to our openvpn server any more.
I`m using tunnelblick as vpn client to connect from my mac to the office. It hangs at "waiting for response from server". I`m not an expert, but as I understand the tls handshake fails. I googled around and tried everything suggested, but no success.
I haven`t used it since the latest openvpn package update, perhaps it has something to do with that?
I found this, too, but it didn`t help either:
http://openvpn.net/index.php/open-sourc … ivity.html
This is the client log:
2013-02-16 11:17:06 MANAGEMENT: >STATE:1361009826,WAIT,,,
2013-02-16 11:18:06 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
2013-02-16 11:18:06 TLS Error: TLS handshake failed
2013-02-16 11:18:06 TCP/UDP: Closing socket
2013-02-16 11:18:06 SIGUSR1[soft,tls-error] received, process restarting
2013-02-16 11:18:06 MANAGEMENT: >STATE:1361009886,RECONNECTING,tls-error,,
2013-02-16 11:18:06 MANAGEMENT: CMD 'hold release'
and this is the server log (verbose 5):
Sat Feb 16 11:38:08 2013 us=118721 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Sat Feb 16 11:38:08 2013 us=133716 Diffie-Hellman initialized with 2048 bit key
Sat Feb 16 11:38:08 2013 us=134619 Control Channel Authentication: using '/etc/openvpn/keys/ta.key' as a OpenVPN static key file
Sat Feb 16 11:38:08 2013 us=134677 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Feb 16 11:38:08 2013 us=134707 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Feb 16 11:38:08 2013 us=134745 TLS-Auth MTU parms [ L:1590 D:166 EF:66 EB:0 ET:0 EL:0 ]
Sat Feb 16 11:38:08 2013 us=134808 Socket Buffers: R=[212992->131072] S=[212992->131072]
Sat Feb 16 11:38:08 2013 us=135268 TUN/TAP device tap0 opened
Sat Feb 16 11:38:08 2013 us=135370 TUN/TAP TX queue length set to 100
Sat Feb 16 11:38:08 2013 us=135572 Data Channel MTU parms [ L:1590 D:1450 EF:58 EB:135 ET:32 EL:0 AF:3/1 ]
Sat Feb 16 11:38:08 2013 us=137116 UDPv4 link local (bound): [undef]
Sat Feb 16 11:38:08 2013 us=137832 UDPv4 link remote: [undef]
Sat Feb 16 11:38:08 2013 us=137870 MULTI: multi_init called, r=256 v=256
Sat Feb 16 11:38:08 2013 us=138013 IFCONFIG POOL: base=192.168.1.220 size=10, ipv6=0
Sat Feb 16 11:38:08 2013 us=138087 Initialization Sequence Completed
Sat Feb 16 11:38:22 2013 us=273924 MULTI: multi_create_instance called
Sat Feb 16 11:38:22 2013 us=274097 192.168.1.4:1194 Re-using SSL/TLS context
Sat Feb 16 11:38:22 2013 us=274189 192.168.1.4:1194 LZO compression initialized
Sat Feb 16 11:38:22 2013 us=274539 192.168.1.4:1194 Control Channel MTU parms [ L:1590 D:166 EF:66 EB:0 ET:0 EL:0 ]
Sat Feb 16 11:38:22 2013 us=274643 192.168.1.4:1194 Data Channel MTU parms [ L:1590 D:1450 EF:58 EB:135 ET:32 EL:0 AF:3/1 ]
Sat Feb 16 11:38:22 2013 us=274701 192.168.1.4:1194 Local Options String: 'V4,dev-type tap,link-mtu 1590,tun-mtu 1532,proto UDPv4,comp-lzo,keydir 0,cipher AES-128-CBC,auth SHA1,keysize 128,tls-auth,key-method 2,tls-server'
Sat Feb 16 11:38:22 2013 us=274717 192.168.1.4:1194 Expected Remote Options String: 'V4,dev-type tap,link-mtu 1590,tun-mtu 1532,proto UDPv4,comp-lzo,keydir 1,cipher AES-128-CBC,auth SHA1,keysize 128,tls-auth,key-method 2,tls-client'
Sat Feb 16 11:38:22 2013 us=274745 192.168.1.4:1194 Local Options hash (VER=V4): 'c5677ab3'
Sat Feb 16 11:38:22 2013 us=274765 192.168.1.4:1194 Expected Remote Options hash (VER=V4): 'a7133b47'
RSat Feb 16 11:38:22 2013 us=275000 192.168.1.4:1194 TLS: Initial packet from [AF_INET]192.168.1.4:1194 (via [AF_INET]192.168.1.205%br0), sid=e46fc8e5 4b4327b5
WSat Feb 16 11:38:22 2013 us=275121 192.168.1.4:1194 write UDPv4: Invalid argument (code=22)
RWSat Feb 16 11:38:24 2013 us=597178 192.168.1.4:1194 write UDPv4: Invalid argument (code=22)
RWSat Feb 16 11:38:28 2013 us=80376 192.168.1.4:1194 write UDPv4: Invalid argument (code=22)
RWSat Feb 16 11:38:36 2013 us=360017 192.168.1.4:1194 write UDPv4: Invalid argument (code=22)
WSat Feb 16 11:38:52 2013 us=266108 192.168.1.4:1194 write UDPv4: Invalid argument (code=22)
RWSat Feb 16 11:38:52 2013 us=284681 192.168.1.4:1194 write UDPv4: Invalid argument (code=22)
RSat Feb 16 11:39:22 2013 us=604136 192.168.1.4:1194 TLS: new session incoming connection from [AF_INET]192.168.1.4:1194 (via [AF_INET]192.168.1.205%br0)
Sat Feb 16 11:39:22 2013 us=604198 192.168.1.4:1194 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Sat Feb 16 11:39:22 2013 us=604219 192.168.1.4:1194 TLS Error: TLS handshake failed
This is the server config. It`s located in /etc/openvpn/openvpn_server.conf and the server starts fine with systemctl start openvpn@openvpn_server.service.
mode server
dev tap0
multihome
server-bridge 192.168.1.205 255.255.255.0 192.168.1.220 192.168.1.229
client-to-client
proto udp
port 1194
comp-lzo
persist-tun
persist-key
keepalive 10 120
ca /etc/openvpn/keys/ca.crt
dh /etc/openvpn/keys/dh2048.pem
cert /etc/openvpn/keys/archvpn.crt
key /etc/openvpn/keys/archvpn.key
tls-auth /etc/openvpn/keys/ta.key 0
tls-server
verb 3
cipher AES-128-CBC
log /etc/openvpn/openvpn.log
This is the client config:
client
remote myserver.dyndns.org 1194
dev tap0
proto udp
port 1194
comp-lzo
ca ca.crt
cert tom.crt
key tom.key
persist-tun
persist-key
resolv-retry infinite
keepalive 10 120
tls-auth ta.key 1
tls-client
ns-cert-type server
verb 3
cipher AES-128-CBC
float
What I checked and tried so far:
0 did a lot of reading
1 modules are loaded in /etc/modules-load.d/openvpn.conf
tun
bridge
2 netcfg config starts tap and network config
/etc/conf.d/netcfg
NETWORKS=(openvpn_tap office_lan_openvpn)
/etc/network.d/openvpn_tap
INTERFACE='tap0'
CONNECTION='tuntap'
MODE='tap'
USER='nobody'
GROUP='nobody'
/etc/network.d/office_lan_openvpn
INTERFACE="br0"
CONNECTION="bridge"
DESCRIPTION="Ethernet/OpenVPN bridge"
BRIDGE_INTERFACES="eth0 tap0"
IP="static"
ADDR="192.168.1.205"
GATEWAY="192.168.2.1"
DNS=("192.168.1.1")
3 checked firewall port, even disabled iptables
4 port forwarding in fritzbox is active
5 all other connections from outside are working (http, ftp)
6 certificates and keys should be fine, they were working in the past with the same setup
Hope someone can help me, I really need my connection back… If anything else is needed just let me know.
Last edited by archtom (2013-02-16 16:08:21)I solved it
I did more reading and it seemed to be a problem in the config files, anything else could be pretty much excluded.
I started with fresh config files referring to the german wiki (it`s different) from .org. Since it was working with this I started to track the problem down. In the end I had to delete the
multihome
option in the server config. Everything seems fine now! Thanks for everyone that read it. Perhaps it helps someone in the future.
Maybe you are looking for
-
This computer is already associated with another Apple ID
Hi people! Please excuse me if I described anything not exactly as it may appear on English systems but Spanish is my language of choice. At home, my boyfriend and me share a Macbook Pro and we have a user account for each one. In each account, each
-
Changed resolution by mistake and have lost everything "mode not supported"
Guys, This one is totally my own fault but ive managed to crash my Apple TV and was wondering if someone may be able to assit me with a solution? Apple TV was working fine on my samsung HD TV and i was playing about with the settings. I belive i was
-
Does anybody here know how I can compile my java programs?
I downloaded j2se 1.4.0 and j2se 1.4.1 and for some reason I can't the javac command in the bin directory. There is a command called javaw but I don't know what it does. can anyone help me?
-
Suspended messages to be display in BAM Portal
There is a requirement to display failure messages/suspended messages in BAM portal.Please help me how to provide this solution.
-
Mapping usb drive with rdesktop to windows server/XP
I have read that the -r option with rdesktop allows you to map a local usb drive on a linux pc to a windows server or XP as follows: rdesktop -r disk:usb=<path> <ipaddress> I have arch installed with a base gnome so that usb drives are automatically