Work Completion in the cProjects Dashboard is not working

Hi All
In my cProjects dashboard Work Completion is not reflecting the actial figures. It is always displaying as '000'. I have run the evaluation report for dashboard and all other fields are reflecting except this field. Can you guys let me know what could be the problem.
Thanks
Rajesh

Hi Rajesh,
have you entered actual work + remaining / planned work? This KPI is calculated based on that. It is NOT the 1:1 aggregation of the % complete on task level. Regards
Thorsten

Similar Messages

My iphone 6 connects to the car via bluetooth, the music works good, but the phone calles does not work. It looks like it is working but doesn't. I have tried in my Hyundai and a Dodge rent car and get the same results. I updated the last 8.0.2.

My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work. It looks like it is working but doesn't. I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results. I updated the last 8.0.2. It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call. This is happening on both cars.
Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

My passcode is working to unlock the screen but does not work with restriction passcode. Should they be different?

My passcode is working to unlock the screen but does not work with restriction passcode.
Tried it several times but it did not work, though i can use the phone and all features even after 13 failed attempts.
Should restriction passcode be different from what i set?

There is no default restriction password. If you didn't set it someone else may have. If you can't find it then you may have to follow the steps here:
Forgot passcode for your iPhone, iPad, or iPod touch, or ...
Do you have a backup which might not have this restriction passcode? If so restore to that backup?

I am getting "Connection was reset" when trying to load any of the "My Yahoo" pages. Other sites appear to work, and trying the FAQ suggestions did not work

When I tried to log into my my.yahoo.com page, entering my user ID and password, I got the following error message:
'''The connection was reset
The connection to the server was reset while the page was loading."
I am able to open the same page in Windows Explore 6.0 and 8.0, and when using Firefox on a different machine
Also, last week, everything worked just fine.
So it appears that something must have happened to the
configuration on this machine.
Any help would be appreciated.
Thanx,
-Craig Lang

I am not familiar with the process involved with the link I am providing so please accept my apology if it is a repeat of something you have already tried...
How do I prevent Creative Cloud from taking over my CS6 perpetual license?
https://forums.adobe.com/thread/1584746

Auto-complete for the email addresses in the mail app is not working

Hi, could somebody kindly help, please?
I have just got a new iphone 5s after my old 5 got broken. When I got the new 5s one I had to restore everything from the back-up copy I had on my ipad or in my icloud, whatever.
The problem is that in the standard mail app which you have at the bottom of the screen auto-complete for the email addresses is not working on this new iphone. However, it still works on the ipad.
Can I turn it on somewhere or is it a bug? I remember When my old iohone was new as well as the ipad and ipod, I did not have to turn on anything. The recent email addresses list (appears when one starts to type an address in the address bar when writing a new email message) appeared automatically. And on this phone it doesn't appear at all. It doesn't suggest me any recent or whichever email addresses and I am really lazy to type an address each time.
Could this be solved?
Many thanks in advance for the eventual help.
Olia

I am also getting same problem...................anybody please help.

HT1766 Whenever I try to backup my ipad to iCloud, I get the following error message and can't work out why " the last backup could not be completed" I am connected to my wi FI and iPad off and connected to power. Please can anyone help ?

Whenever I try to backup my ipad to iCloud, I get the following error message and can't work out why " the last backup could not be completed" I am connected to my wi FI and iPad off and connected to power. Please can anyone help ?

In settings>general> cellular do you have it turned ON?

Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.

Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.

Yes hello,
My widgets are not working as well, i looked on forms and it seams that the 10.5 update fix there problems. I also did an archive and install from 10.4... One of the major reasons i purchased the upgrade was to use widgets to clip parts of safari, i'am totaly bummed because all forums i find end with the question un answered. i'am a little bummed becuase there are a couple of things that worked with 10.4 that are not working in 10.5 (like some meg moives not playing.
i do not wish to create a new account because i do not want to reinstall all my software, photoshop, final cut, dvd studio pro.. etc.
i hope to find the fix some how.
I have opened up the console application and when i select widgets load or delete them i see no activity in the console. I'am not familiar with the console app. or command lines.
is there any more info on this matter? is there any support from apple?
Thankyou

My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad one.

My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad .

Are you using the Sky Go app to try and watch it ? If so are you logged in with your Sky account ?
If you are using the app then you could try closing the app completely and see if it works when you re-open it : from the home screen (i.e. not with Sky Go 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Sky Go app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

The "Awesome Bar" is not working. It does not recall anything from the Bookmarks

Just updated to new Firefox. In the past, when I would start to type a site in the address bar firefox would complete it as it was already in my bookmarks. But now it does not do anything. It just sits there waiting for me to complete the address. I could start to type Netf and it automatically finish Netflix.com
Why is this happening. Also, for the first couple days of the new version I had to go back into Tools, Options and reset things at least 3 or 4 times before they would finally stay the way I wanted them.
I would tell it Never Remember History and after while I would look and it would say, Remember History. I wanted a Blank Start page, and it kept changing it. It's okay now but the Awesome Bar is not working at all.

Do your bookmarks show up in the auto-suggest drop-down list?
''If not:'' Under Options > Privacy, in the bottom section, does it still show that Firefox should suggest Bookmarks in the Location bar?
If auto-suggest works but the autofill isn't happening, you could double-check that it has not been disabled here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''autof''' and pause while the list is filtered
(3) If the '''browser.urlbar.autoFill''' preference is bold and "user set" to false, double-click it to switch its value back to the default value of true. That should work in new tabs.
It's it already true, hmm, I wonder whether this is a private browsing issue? (I didn't test with automatic private browsing.)

The home press is not working in my ipad2

The menu boton is not working
I get my iPad2 before tow weeks only

Try closing the Settings 'app' completely : from the home screen (i.e. not with the Settings app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Settings app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Reading the EDI X12 file not working with the patch 8233048

Hi
I have installed the latest path 8233048 on my windowsXP system, now I am not able to see the File being polled and processed.
In b2b.log I can see the last message as "oracle.tip.adapter.b2b.data.MsgListener:run start listening on message" after that no log.
In b2b_dc_transport.log, I can see only
2009.02.07 at 20:35:45:236: B2BStarter thread: (DEBUG) TransportProperties.TransportProperties():http.receiver.registry_port=5110;smtp.receiver.protocol=imap;PROTOCOL_ENDPOINT=null;file.receiver.polling_interval=30;polling_interval=30;http.receiver.instance_name=IP;
2009.02.07 at 20:35:45:266: B2BStarter thread: (DEBUG) initialize TransportReceiver: [IRIS_Transport_Server < file > < IRIS >]
2009.02.07 at 20:35:45:266: B2BStarter thread: (DEBUG) FileReceiver.init() started ....
2009.02.07 at 20:35:45:287: B2BStarter thread: (DEBUG) FileReceiver.init() completed.
Could you please tell me if I need to do any changes.
This is working on b2b with only patch: 5907304 which is installed in another windows XP system.
The same configuration with the latest patch is not working.
Edited by: Praveena Paruchuru on Mar 7, 2009 7:56 AM

Hi Dheeraj,
I have restarted my system many times, not only B2B.
I have taken the print out of both the tip.properties and compared line by line and wanted to check out which line was making it not to function.
I added the mismatching lines one by one by one, it was working for all teh updates. Finally I changed it to my new tip.properties.
Then surprisingly it is working.

The requested dashboard does not exist

Dear Expert,
Am using SAP 8.8 PL18, on windows 7.
getting below error.
The requested dashboard does not exist.
Dashboard:/ com.sap.b1.dashboards/0010000101.SAP_DASHBOARD_001.DAB001/default.html
Thanks
Kevin

Kevin:
That error is fixed like this..
From Integration Framework Page
SLD >> [DB Work] >> JDBC Section
URL: edit
on the databaseName put your DB COMMON
databaseName=SBO_COMMON
Save.
Restart Services.
REGARDS.
Christian

I had to get a new keyboard and now the keys in the upper row are not working appropriately. How can I fix this problem?

My keyboard stopped working so I went to the apple store to replace it with another one. Now I am back home and the keys at the very top are not working correctly (volumn F12 shows the dashboard, F11 takes the screen up and away, F8 pause button shows spaces, etc.). What should I do to correct this problem - I assume I probably need to download some type of softwear but what? I have a Mac OS X Version 10.5.8 desktop - 2.66 GHz Intel Core 2 Duo processor.

All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

Has anybody experienced the iPhone off switch not working all the time.

I have an iPhone 5, it's about 16 months old and it has experienced an annoying issue. The off button does not work all the time, sometimes I have to press it multiple times and other times it just works. The worst case is when it does not work at all, very frustrating. I didn't expect this type of issue for a phone that is not even a year and a half old.
I did some searching on the internet and there are 2 schools of thought, the first is that this is a hardware fault and Apple know about it but won't admit it because it would cost them too much to repair/replace phones with the issue. The second school of thought is that it is a software issue and a backup/reset/restore will fix it; I tried doing this but it did not resolve the issue.
Further digging seemed to suggest that it was really a hardware fault and the only option was to get a refurb from Apple for a ton of money, not cool.
Anyway, if anyone has any more information that could help me resolve this issue I would greatly appreciate it.
//*eggbox23

@diesel vdub, thanks for your suggestion, I setup an appointment with the Genius Bar and found out in about 5 minutes that everything I have read up on so far is true.
Firstly the technician admitted that there is a sporadic fault on the iPhone 4s and iPhone 5 switches, something to do with the design of the switch that included a rubber element that rolls up (whatever that means) and causes the switch to fail. He then indicated that the iPhone 5s does not have the issue because the switch has been completely redesigned.
Since I was stupid enough to not take out the extended warranty the only options he gave me were to purchase a new phone or to get a refurb for $269, not cool. Why would anyone think that a phone would not work correctly for 2 whole years when the phone only cost about $600!
Since I have about 7-8 months left on my phone contract I am not prepared to pay for either option. I find it amazing that a phone can develop this type of issue in such a short time and then expect the customer to pay for their failures. Apple supposedly sells a very high quality product for a very high price, looks like they have taken a step back from this philosophy.
I am disappointed in the options that he gave me (I don't blame the technician) but I suppose I expected more from Apple in terms of quality and service.
//*eggbox23

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

Work Completion in the cProjects Dashboard is not working

Similar Messages

Maybe you are looking for