Work/duration in the operation tab of PM order
Dear all,
Why earliest finish - earliest start is not equal to duration but equal work in the operation tab?
The work is the total number of hours for the operation. The duration is the hours per person.
work = duration * number
If the work is done by two Electricians together ,I think it should be equal to duration.
If the work is done by two Electricians one by one ,I think it should be equal to work.
Does it relate to the work center formulas which is filled in the scheduling tab if work center? ...
Similar Messages
-
How to customize standard text in operation tab of PM order
Hi everybody,
I am Rajat.
I have question in SAP PM:
In operation tab of PM order we have standard text, rt now i m using fresh system...kindly let me know how to enter values in that so that when i take drop down i'll see those values.
Kindly reply with the path, for customization and t-code or path for master data both.
Thanks
Warm regards
Rajatand IMG path - plant maintenance and customer service - maintenance and service processing - Assign standard texts for short message to order types
Thanks
S.N -
Put Purchase Orders checkbox in the first Tab in sales order window
How do I use UI SDK to put the Purchase Orders checkbox in the first tab in sales order window?
I want to enable the checkbox during form load, therefore I include the following codes:
Case SAPbouiCOM.BoEventTypes.et_FORM_LOAD
'// Specifies that SAP Business One application opened a form.
Try
SBO_Application.Forms.Item(FormUID).Items.Item("104").Click(SAPbouiCOM.BoCellClickType.ct_Regular)
Catch ex As Exception
SBO_Application.MessageBox(ex.Message)
End Try
But it doesn't work. -
MOH only works when dial the operator (0)
Hi all,
i`m using cisco cucm-BE with mgcp protocol with the gateways,
In the unity configuration, -->call management-->system call handler-->operator-->edit - transfer call-->standard-->under the transfer action
I choose Transfer call to : Extension and i put 0 and i choose ofcourse supervise transfer, and checked the box for "wait while....".
By doing the above config ,
When someone called form the pstn to the cucm and after he hear the autoattendant:
the MOH only works when i press 0 (the operator) and when i press an internal extension i hear a ring back tone and sometimes i hear the MOH for one second and then the ring back tone played ....... dialing 0 only let me hear the MOH Normally after "wait while i transfer your call"
how i can hear the MOH too after i dial the internal extension normally?
the following is done:
-am using unicast MOH
- that media resource is enabled. Media Resource->MoH Server and verify that the run flag is set to YES.
- Restart the Cisco IP Voice Media Stream App service.
- Check if G711,G729 is enabled for MoH in Service Parameters->Call Manager->Cisco IP Voice Media Stream App service.
- the IP Phones or Gateways has assigned the MRGL that include the MOH resource.
thanksBrand new iPod 4 just purchased yesterday (Jan 9 2012) and it is running the latest rev of iOS. Seeing the exact same problem. The camera can be accessed from the lock screen and it works. BUT, if I try and access the camera from the icon, I get a black screen.
Apple, is this a hardware or software issue?
Please advise. -
When I log into my facebook account, it loads up fine. However, if I try to open any facebook pages into a new tab, it fails to load. It doesn't seem to affect the original tab in which it was loaded. It also doesn't seem to affect Facebook app pages. I have tested this on IE without any problems. This only happened after a firefox update.
== URL of affected sites ==
http://www.facebook.comFehler: (document.domain wurde nicht gesetzt) wurde die Erlaubnis für das Lesen der Eigenschaft Window.AsyncRequest von (document.domain=) verweigert.
-
Restrict display of Condition Value in the Conditions tab in Purchase Order
Dear All,
We have a requirement that in the Conditions tab the condition value column should be displayed as blank to users other than those related to Purchasing and Costing.
I have checked that there are no standard authorization objects to restrict these.
Any inputs on how to achieve this?
Thanks!
TejasavHi,
you can influence fields using BADI ME_PROCESS_PO_CUST. I don't think that you can disable just your field but you should be able to hide whole tab "Conditions". So you can perform your own authorization check in implementation of this BADI and then display or hide tab.
Cheers -
Which table contains the Workcenter and the operation line of an order
Hello
Does someone knows in which table I can found the link between the operation defined in a maintenance order and the workcenter? If there is no direct link in a table, is there a function allowing me to do it?
Kind regards
ChrisChris,
AFVC and AFVV contain most of the operation data.
The link is:
AFKO-AUFPL --> AFVC-AUFPL
AFVC-AUFPL/APLZL --> AFVV-AUFPL/APLZL
See [here|http://www.sapfans.com/forums/viewtopic.php?t=200474] for more PM/CS tables
PeteA
[www.pjas.com] -
Restrict the Partner functions visible in the Partners tab of One Order obj
Hi Gurus,
We are implementing Opportunity Management
We want to restrict the Partner functions visible in the picklist in the partners tab
can anyone suggest how we can achieve this
Regards,
VishVish,
If you would have searched on "restrict partner list" in this forum, you would have found your answer as the first search result. Please in the future do a search before posting here and read the rules of engagement.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement
The thread that answers your question is located here:
Hide List Elements for example Partner Functions
I'm know locking this thread due to this being a duplicate question.
Thank you,
Stephen
Edited by: Stephen Johannes on Apr 27, 2009 8:45 AM -
PM: how to track the operations in prev.maint order against object list
Dear PM Guru's.
i have one issue in my preventive maintenance scenario. i clubed the same type of machines in one maintenance order under object list tab. and i mention the list operations in maintenance order. suppose in one preventive maintenance order 10 operations are maintained and 5objects are mentioned in that order. Now i like to mention all these 10 operations activities against to 5 objects. how i can assign sequentially? i required like 10operations one by one row wise and 5objects side by side column wise. i would like to update the each operation activity against each machine column? how i have to do this one?
Please suggest me and help me.
regards
Jalendhar MeruguUsing Object functionality, we can maintain many equipments in the order.
But the constraint is that one operation can be assigned to only one equipment. In your case, you have 5 objects. If all 10 operations will be performed on 5 objects, then you have to maintain 50 operations & you should assign the objects.
In other words, if one operation will be performed on 5 objects, then you should define that one operation 5 times & you have to assign to technical objects. You can't share one operation to many equipments. -
My html code is only working on the 1st tab panel (muse widget)
I have some html code with javascript which calculates total marks. I inserted this in the first tab and my code works fine, but when i insert it in the second, third and so on it stops working completely(including the 1st tab). Is there something i am doing wrong or is this not possible?
Hi
If the custom code you are using is in conflict with Muse code or if its breaking page workflow then it can be an issue as the page elements will not work.
Please verify the code used and modify accordingly.
Thanks,
Sanjit -
How to use parallel sequence for split the operation qty. urgent or other o
PP guru
My scenario is as follows.
I ve one material suppose xyz.
For that material I' ve created bom, routing.
In routing I' ve mention only one operation. 0010.
Now I' ve the production order of 1000 kg.
I want to use two work centers to run this production order. ( e.g.work center a and b)
In routing I used work center a.
In short I want split that operation.
So what I ve to do or use parallel sequence and how???
or else is there any other option to split the order to two or more machines/work center?
Pls explain me in brief.
Regards,
RamHi,
If you want to carry the production with two different work centers , first you need to split the operation qty.
For this in the order type dependent parameters OPL8
in the controlling tab page enable the indicator Cost collector
and set the default rule as PP2.
Create a Product cost collector with KKF6N.
Now in the production order , select the operation and choose functions--->>> split.
Now enter the operation split quantity and execute.
Now in MD04 you can see two production order.
In the second production order change the work center in the operation overview as desired and save.
Regards,
nandha -
Confirmation of a formula in work center in the confirmation
Hi All,
I want a result of a formula of work center of particular operation in confirmation. Can any body guide the stepsHi Vachanala,
1. You create a standard value parameter in OP7B which is to be used in the formula.
2. Your standard value key created through OP19 should be containing this parameter which you have created and this key should be assigned in the basic data in the work center. Check generate box before saving the SVK.
3. You define the formula which uses this parameter through OP21. You should check allowed for calculation box.
4. In the costing tab of work center you maintain the formula against this parameter. If you want to cost it In that case and should also maintain an activity through KL01 and maintain a price for it through KP26. This activity should also then be maintained against the parameter in the costing tab of work center. Also check the reference indicator against the parameter.
5. Assign this work center to the operation in routing.
6. Create order, release and do confirmation, if you click actual data system should propose you the quantity as per calculation. Cost will be calculated if you maintained as per point 4, in the planned cost against the order.
Please check and revert.
Regards
Sm. -
IW31/32 Operation User Status visible as a field on Operation tab table
Hello,
Is there a way to add the "Operation User Status" as a field visible on the Operation tab table for IW31/32.
Your help will be very much appreciated.
Thanks.jay23r
Not as standard.. and its the same with the used-fields which should be displayed on the Operation tab table (it is in the task list..)
I don't know why SAP haven't sorted these out...
Open an OSS Message to SAP - the more requests they get, the more chance there is of them fixing it in the future
What we have done a few times in the past is to utilise the Header Enhancement tab (user-exit IWO10018) to add a table control to show these fields. Its not elegant, but it works
PeteA -
Distribution over the periods of costs on the operation
hi, gurus,
could you, please, answer my question.
How can be distributed over the periods planed and actial costs on the operations.Hi Maria:
I completely agree with you. We have the same problem. I think there is a gap. I explain:
You assign a material component to a operation (10 units). This begins in 1/01/2013 and ends in 30/10/2013 (10 months) You assign a MRP distribution key (field Distribution, at General data tab) to split the whole quantity (10 units) over the duration of the operation. Material has item category 'L', so a reserve is created.
From logistic point of view: You can check, at TX MD04 that the requierement has been split. Good !! One unit each month. So you expect 1 unit per month. Accordingly, costs related to this operation should reflect this situation, one unit each month...
From cost point of view: All costs related to this material (10 units) are all assigned to the begining of the operation ! (1/01/2013) This feauture does not meet the an ERP principle (logistics planning and cost planning go together) Logistics planning is OK, however cost planning is not.
Can any of you solve this issue?
Thanks a lot in advance.
Javier -
All My Files:The operation can't be completed because the item can't be found.
After update my Imac to Yosemite I found my trash bin filled and deleted the files. Starting my iMac took about a minute and All My Files in finder is not working anymore, responding : The operation can’t be completed because the item can’t be found.
I tried restart but still no solution.Dear all,
I again downloaded OS Yosemite through the App store under purchases and I am happy to say I solved the problem!
Ben
Maybe you are looking for
-
IMac (15in flat panel) won't stay on
Hi, I have an 15in flat panel iMac that will shut off almost immediately after you turn it on. The computer and the screen both turn on for a few seconds and shut down. It seems as if the computer just loses power after you turn it on. I have replace
-
In Adobe 8 how do you create a bates log file?
I love this feature in Adobe 9 where one can select "output options" and change the way the bates stamped PDF is saved, to create a log file of bates numbers per document, etc. Are these same output options and bates log file options available in Ad
-
How do you downgrade to ios 5?
After upgrading my 3GS to iOS 6, I'm now wanting to go back to version 5. Does anyone have a link of the actual file so I can downgrade? As far as my reasons to downgrade, performance wasn't the issue. I didn't see any new features for my 3GS, and th
-
10.6. printing broken for HP printer,,how to fix6
Since upgrading to 10.6.6 my HP7850 printer is unavailable via USB. I usually leave it connected via a USB printer port on the Vigor router, so other PC's in the house can print to it, but when needing to print something that needs better printer qua
-
List Item "Shared With" dialog error
Just recently I started getting an error whenever I use the "Shared With" button on a list item to set permissions for the item. The dialog comes up, but the loading symbol continues to run and the Invite People, Email Everyone and Advanced options a