Work flow configuration and user document

my client wants work flow configuration for parking of documents -anybody is having configuration and user document-
please send to my mailid:[email protected]
thanks in advance

Similar Messages

Fund Management Configurations and user Documents - ECC 6 Version

Dear all,
If anybody have the Configuration and user documents pertaining to Fund Management - Government - ECC 6 Version and also the Configurations and user documents pertaining to Budget Control System (BCS), kindly send it to me.
My E-mail ID is [email protected]
Regards
V.Krishnan

Hi Ezequiel,
Thanks I have got it. After activating EA_PLM and EA_SCM i am able to get it.
Thanks a lot.
Warm regards
Purnendu
P.S. - Full reward points for you.

Investment Management - Configuration and User Document

Hi
Can anybody provide the Configuration and User Documentation for Investment Management. I am new to this area.
My E-mail ID is [email protected]
Cheers
V.Krishnan

hi
see below link for config of Investment management
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/IM/IM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_IM.pdf
nagesh

Work flow configuration

hi all,
I have a problem regarding the work flow configuration as from work flow developer i am taking a role of work flow adminstration for a new role out. I have problem configuring the swu3 tcode for new SAP ECC6.0. please let me know what are the necessary work bench requests and custom requests needed to be done and transported to production.
I have a problem with the new configured SAP ECC 6.0 in swdd the view is not changing from Tree mode to Graphical mode please help with this issue.
Thanks for your help in advance.
Krishna C M

Hello Chaitanya,
The option to change the modeling view is disabled in ECC 6.0, which is Graphical(Network) by default. But you can have a similar type of view of the steps in the displayed in the workflow definition under the navigation area tab. This is present to the left in the screen of workflow builder under the Information area.
From the SAP online help you can see that "You can only use the graphical modeling view if you are working with the SAPGUI for Windows. If you call the Workflow Builder using a different SAP GUI, the tree view is displayed automatically."
But still if you want to see the tree view of a workflow definition just change the tab "Graphical Tab" to "Tree Modelling" which is present at the top of the workflow graphical diagram beside the Information area tab.
Hope this will help you.
Regards,
Samson

Is work flow configuration & custmization T.Codes in srm same as in r/3

Hai Gurus
Need clarification ,is work flow configuration & custmization T.Codes in srm same as in r/3.
For example:Starting condition defining in srm is through SPRO>SRM>SRM server>Cross appl basic settings>sap business work flow
And in R/3 it is through T.Code PFTC
Thanks in Advance
chandra

Hello Chandra,
T-codes for workflow customization & configuration are similar in SRM and R/3. There are multiple ways to check each transaction.
Thanks,
Shital Nimje
Edited by: Shital Nimje on Sep 21, 2009 5:41 AM

Work Flow Template and Work flow tasks

Hi,
Work Flow Template and Work flow tasks are the two objects which are found surprisingly in our client system(when we go to PP01/ HRP1000 IN SE16 ).My employer wants to know what these are:
Can any one please tell me about "Work Flow Template and Work flow tasks".
are the SAP Generated?
Can we delete them if we don't need?
Thanks in Advance
Gopi Palleti

Hi Gopi,
Workflow Template and workflow tasks are part of SAP Business workflow.
A business workflow is an executable process embedded in SAP applications that you use to automate business processes.
You can find more info here.
http://help.sap.com/saphelp_nw70/helpdata/en/c5/e4b62c453d11d189430000e829fbbd/content.htm
Regards,
Sharadha

Internal error in communication between configuration and sales document

Hi,
While i am doing VA32 i got this message plz advise me..
Internal error in communication between configuration and sales document
in the form GET_CONFIG_MODE
bit urgent issue..
Regards,
San Rao.

Hi
Pls check the OSS note 836097, which can solve your problem.
In my experience, I can tell you something
When configuration is done, the configuration object is stored in VBAP-CUOBJ for the item. For this CUOBJ, you can find the configuration in the tcode CUTABLEINFO or in tables IBIB, IBIN, IBEXTINST, IBINOBS,IBINOWN,IBST,IBSTREF,IBINVALUES.
If for the order if VBAP-CUOBJ is not available, then it will not be able to get the configuration. The error message in this case is V1 854 of message class V1.
You can search for some other OSS notes also using this error message and the form name.
Also refer to 173726, 174333,175372 and 173664

Triggering a sub work flow for multiple users at same time.

I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
How can this be achieved?

Tyr to do like this,
1. First include the subworkflow in the main workflow template.
2. Now include standard Block Step in the main workflow template.
3. In the block select the block type as ParForEach.
4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing assign the multiline container element name in the for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
&COSTCENTER[&_WF_PARFOREACH_INDEX&]& --------> &_COSTCENTER_LINE&
Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated.

Completion work flow configuration

Hi All,
As per our understanding for configuration of completion by purchaser workflow required folllowing settings:
1. Activate the Completion work flow and it shoud have condition statement for critetion like free entry,sc w/o price, etc.
2.We should check the SC other apporval workflows and make the condtion suitable so that both workflow should not create cross condtions.
We are trying to use completion workflow for all free text items (which are without prodcut master), as we have maimtain the condtion for workflow as ;
&EC Req coverage request free entry exist& EX
and &EC Req coverage request RFQ follown doc& (not equal to) X
and &EC Req coverage request wothout price& (not equal to) EX
And we have our SHC without approval workflow as;
*&EC Req coverage request free entry exist& (not equal to) X
*and &EC Req coverage request Total value& < 500
But when we are tyring to create describe requirement with test item then work flow goes in ambigous state,
Anybody who can expalin about starting condtions and other steps we are missing here?
Thanks,

Hi,
I could able to resolve that but facing another issue,
Steps I followed,
I have create SHC with text itme and then ordered.
This SHC gone for approval to Purchaser
Purchaser did changes and approved
Once again checkd in employee check status in approval preview, it says approved by purchaser
But final approval status is still awating apporval....why is it so?
It means now our other approval like SHC witihout approval is not getting triggred.
So what Condition can I maintain to make std approval process carry on?.
Any idea,
Right now situation is condtions for,
Completion by purchaser is like :
&EC requiremetn coverage request free enty exist& EX
Workflow without approval required for SHC is like:
&EC requiremetn coverage request free enty exist& NX
and EC requiremetn coverage request total value < 500
Thanks,

[SOLVED] Wireless card works, but configuration and software doesn't

Hi,
I could manage to activate my Atheros wireless card using the madwifi drivers. I wanted to use knetworkmanager, but unfortunatly i doesn't recognize any of my network devices. I've read the other networkmanager threads, changed the daemons order, disabled the network daemon and the routing entry in rc.conf, but still (k)networkmanager doesn't know anything about my devices.
I tried to use knetworkmanager-svn from the AUR. Initially it doesn't work because the SVN URLs inside the PKGBUILD script a wrong, but even after I fixed them I couldn't compile the source, because there is no configure and no Makefile in the svn head. I'm really a noob when it comes to the linux build system, so I had to give it up.
Now I use wifi-radar. It is terribly slow to connect, but it works. However, when I disconnect with wifi-radar, then do 'ifconfig ath0 down && ifconfig eth0 up' the DNS requests fail. I checked /etc/resolv.conf and the default route (set to eth0), but they are right; the interface just doesn't use the name servers. The only way to get it working is to restart the laptop. How does Linux chose a "default interface"?
I'm not afraid of editing text files, but I'd like change networks fast and easy. I don't want to spend hours to adapt to a new access point... I'm really looking forward to the new wlan stack; maybe things will be getting easier then.
kei
Last edited by Kei (2007-05-04 12:36:00)

Okay, now KNetworkManager works (I forgot adding my user to the HAL group :] ).
There is still a problem - I know it's networkmanager related: At home I'm not using a DHCP server. KNetworkManager cannot handle static IP configuration. However, if I issue the command 'ifconfig ath0 192.168.0.12 subnet 255.255.255.0' while KNetworkManager is searching for a DHCP server I can even ping my gateway, so there is definitely a connection. Unfortunatly KNetworkManager closes this connections after a short period (dhcp timeout). Is there a quick'n'dirty workaround for this issue?
Another problem with KNetworkManager: When switching back to wired network, the DNS server is there :-) but the default gateway is not
Thanks for suggestions..
kei
//EDIT: In Debian there is a configuration file called /etc/network/interfaces. KNetworkManager uses the static IP information I enter there. However, when I modify /etc/rc.conf accordingly in ArchLinux, KNetworkManager does NOT use it.
//EDIT 2: After '/etc/rc.d/networkmanager restart' the static IP setting from /etc/rc.conf are used. The problem with the default gateway only occurs when the connection to one of the networks FAILS. After that failure the configuration is kind of messed up.
Altough it seems more like a dirty hack than a definite solution, I'm quite happy with the way it works now.
[CLOSED] <-- maybe I'm blind, but how can I change the topic to "[SOLVED] $Topic" ?
Last edited by Kei (2007-05-03 23:26:04)

Displaying Work Order System and User Statuses in IW37 Search

I'd like to display the work order header system and user statuses along with the operation system and user statuses in an IW37 search but couldn't find an entry as such in the IW37 'change layout' dialog box.
David Macindoe

David Macindoe,
That Order header information isn't available in IW37 report.You may have to use IW37N report or enhance /copy IW37 report to get this information.
Regards
Narasimhan

Show document flow (original and reversal document) in MIGO

Hi,
Scenario
- (MIGO) Create material document Mtype 201 (document 1)
- (MIGO_ Ceate reversal document Mtype 202 (document 2)
Questions
-How to find what document 1 was reverced
-How to see which document is reversed by document 2
This relationsheep is stored in MSEG, but is not shown in MIGO... or I can not find it.
Thank you!
Andrey Garshin.

MIGO is a transaction code.
When you choose display - material document number, It will fetch all details from MKPF and MSEG table.
You reverse material document number is saved in table MSEG,
Your question :
-How to find what document 1 was reversed
-How to see which document is reversed by document 2
Answer 1. Go to MSEG table, give the document 1 in field SMBLN.
Then Click execute.. If you find any entry, then the material document number reversed.
You can find the reversed document number in field MBLNR.
Answer 2. Select "Cancellation - Material Document" in MIGO, then enter the material document number 1. Then press execute.
After pressing execute, you will see the message.
That means this document is reversed..
Regards
Dev

Work flow configuration steps

Hi All,
I am new to workflow. So need details about how can implement the following scenarion.
I have some applications which needs to be approved depending upon the target value present in the application.
If the value in the application is less than 50, i can myself be the approver and email should be sent to me as approver. If the value is more than 50, then the email should go my manager as an approver. If he does not approves in 2 working days then the email should be sent to his manager.
Let me know in details how can I do this and where actually ABAP is involved.
This is related to transaction RECN.
Is there any way to find out if there is standard workflow present for this.
Urgent reply is helpful.
Regards,
Shahu

hi Shahu
i dont have much knowledge in terms of real estate module but in workflow i can help you, the abap may get involved in trigerring of worklflow, you can write down backend codes for trigerring the workflows stating the condition, as you said if it is less than 50 you call workflow with the initator as an approver and if it is more than 50 send it to the manager and for esclating the task after 2 days you can use deadlin emonitoring in your workflow and define the required tasks to happen. again for sending email to the manager's manager you will need to get the email id of the that particular person before trigerring the workflow and pass it to the container of the workflow to be used in case if the deadline monitoring becomes active.
Points are welcome.
Regards,
Saurabh Anand,
Workflow consultant
Datamatics Ltd.

Work flow process and pricing procedure

Hi All,
I want to know the process of workflow including the configuration.
Also i want to know the pricing procedure on how to do the pricing procedure config in purchasing i;e the calculation schema and all the detailed config.
Thanks
Kenny

Hi,
Path: IMG -- Material management -- Purchasing -- Condition -- Define price determiantion procedure.
1. Crate the condition type (Copy from the standard one)
2. Create the calcualtion schema (Pricing Procedure) using the condition type wat u have created
3. Create the schema vendor and schema purchasing organisation
4. Assign the schema pur.org to your pur.org
5. Assign the schema vendor to your vendor
6. Assign the calculation schema (Pricing procedure) to your scheam purchase org and schema vendor combination.
At the time of creating PO system will find the price based on the below steps
1. First it will search the is there any schema pur.org assigned to the pur.org
2. Then it will search is there any schema vendor assigned to the vendor
3. Then it will serach is there any Pricing procedure linked to it.
4. Then it will serach is there any Access seq assigned to that condtion
5. Then it will search the condtion record created for this condition type
6. From the condition type it will pick the price.
Regards
Karthick

Creating a work flow when a user is requesting for a resourc object

hi all
I h've a few resource objects.
I need to put an approval process when a usr requests for a particular resource object.
pls provide me with the high level steps that i have to perform inodrder to achieve this.
thank u
sas

Hi,
You need to do following steps.
1.Create a resource object.Select "Self Request Allowed" option.
2.Attach Object form if any in the Table Name field.
3.Go to process definition and create a process of type approval.Select your object name.
4.Create a task and assigned it to the approver from assignment tab.
You are done.Let me know if you need anything else.
Regards
Nitesh

Work flow configuration and user document

Similar Messages

Maybe you are looking for