Work Flow EVENT - SM58 Entries are not executing automatically

Hi Experts,
I have used the standard BOR2034 for creating PO after saving the contract.
I have developed an RFC enabled FM refering to the Standard FM SWW_WI_CREATE_VIA_EVENT.
Inside the custom FM I am calling the BAPI_PO_CREATE1 for creating PO.
After creating a contract using VA41 I am able to see in Event trace that my Event with corresponding custom FM is triggering.
and the two entries are created in SM58 - Transactional RFC one is my Custom FM name and another is SWF_EVT_HANDLER_START_INTERNAL.
When I execute the LUW by selecting execution, PO is getting created. Where as this entries are not picking automatically.
I want to know, whether I have missed any step in process or do we need to schedule any job for automatically clearing the SM58 queue entries.
Please help me in resolving the issue.
Responses are highly appreciated..
Warm Regards...

Hi Natasha,
As you say that you see the below entries in TRFC monitor, you need have a commit work after the below FMs are called(just one will do),
the two entries are created in SM58 - Transactional RFC one is my Custom FM name and another is SWF_EVT_HANDLER_START_INTERNAL.
How and from where are the above FMs called?
Regards,
Chen

Similar Messages

HT4489 Ever since the last update IOS5.1.1, calendar entries are not saved on Icloud, and would not sync on all I clould devices

After the last update of IOS5.1.1, all caledar entries are not saved on Icloud and thus not synced on all my Icloud devices, even though, spreadsheets are synced, photostream is working and contacts is syncing, only calendar items. Anybody has the same problem? Or a solution to this kind or problem?

Welcome to the Apple Community.
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Possibele entries are not populating for the fields on the selection screen

Hi,
Possible entries are not populating for the fields on the selection screen for the query.But its working fine in Development and Quality Systems.
Can any body help me out
Regards,
Amit.

Hi,
In the Selection screen,go to Settings->Value Restrictions tab->Read Mode Settings->Custom radio button and select the options Values in Master Data or Only Values in InfoProv or Only Posted values for navigation.
After this setting,check whether you are getting the data or not.
Rgds,
Murali

Error: Common entries are not permitted for plan queries and input queries

Hi,
I have a 2 selections in the column struct:
1. year = 2005, version = actual
2. year = 2006, version = plan, marked as data can be changed using user entry or planning function
row has posting periods from 1-12
in the workbook I have inserted this query in the workbook in analysis grid. it runs good.
now i added a button and assigned planning function to it. this planning function copies 2005, actuals to 2006, plan.
when i execute the workbook and hit this button, it gives me following error:
"Common entries are not permitted for plan queries and input queries"
please can anyone provide me assistance with this issue.
thanks,
sam

when i go to diagnosis it displays following:
Diagnosis
InfoProvider ZIP_PLAN2 must be described in this application by both a plan query and by a input-ready query, which is directly defined on the InfoProvider ZIP_PLAN2.
System Response
This is not permitted.

Error Un wanted work flow event triggering

Hi Folks,
I am facing a high priority issue in work flow in PRD, User has created certain PR's for which system has raised required events to tirgger the workflow items and the whole approval job is completely done. Accidentally, the same work flow events are re-triggerd to raise the work item the very next day, when it is observerd for the trace no clues where thrown to explain the situation to client.
Can any one suggest me with this type of rescheduling / retriggering of events, why they have retriggerd ?. The situation created problem by getting the work item's triggered un-wantingly.
Please Help me ASAP I am left with no clue from Last 2 days.
Thanks and Regards,
Krishna Mukthineni

Hi Krishna,
may i know which BO and which event you are using? are you using the event RELEASESTEPCREATED? in the log did you check the workflow is triggered by which user?
In case to avoid this, you can use start conditions in your workflow. This will avoid unwanted triggering of the workflow.
Regards,
Raj

Scripts are not executing

Hi,
we have scheduled scripts through crontab,but from few days these scripts are not executing,there is no problem with time entries in crontab because some of them are executing correctly,what can be possible reasons for the cronjobs to not to execute.we are using sun solaris sparc 64 bit.oracle 10.1.0.4

I can't say without knowing what the script does. Maybe somebody changed the permissions on another directory that script needs, or maybe another file it needs is no longer available, or ???
Just suggesting a troubleshooting step. If you can run the script in a similar setup then you can eliminate the script as a likely problem. I didn't see anything on the crontab entry that looked to be a problem.
PS: "will the date change with the execution of cronjob or it remains the same."
No, the date on the cron daemon will stay the same. It just wakes up once a minute to check for things to do and kicks them off, it never restarts.

The songs on my Ipod Classic wont play at all although you can feel and hear the machinery working hard. The tracks are not playng at all but you can see the Ipod rewinding them all and returning to the album. And this happens to the second IPOD I have!

The songs on my Ipod Classic wont play at all although you can feel and hear the machinery working hard. The tracks are not playng at all but you can see the Ipod rewinding them all and returning to the album. And this happens to the second IPOD I just got!

First off, I would STRONGLY suggest that a external hard drive would make you life much easier by at least being able to back up your songs on the external drive for when you need them. Even if you don't want them in the iTunes library, you can have them all ready on the external to be re-added as needed. You can get 100's of gigs for under $100 shipped.
Anyway, since you used Yamipod, are all the songs back on the computer? If so, I would go ahead and restore the iPod, let iTunes then resync everything back to the iPod, then switch it back to manual and see if the restore and resync clears up the issue.
Patrick

TS4118 My calendar entries are not duplicated in either iCloud, or iPad - but are duplicated on my iPhone. How do I stop this, and also how do I delete the duplicates???

My calendar entries are not duplicated in either iCloud, or iPad - but are duplicated on my iPhone. How do I stop this, and also how do I delete the duplicates???

mervrich,
Use the "Troubleshooting iOS devices" link in iCloud: Troubleshooting iCloud Calendar.

Work Flow for Service Entry Sheet

Hi all,
We need Work Flow for Service Entry Sheet as below using SAP mail box :
Once Created, will go to Incharge for varification.
If yes, will go to Manager for further varification.
If yes, will go to again Incharge back for Release.
Regards,
Hamadeh Bashir
Gulf Petrochemical Industries Company,
Bahrain

Hi,
Object Type BUS2080 (Service Notification)
Standard Task TS00008336 (Processing a Service Notification)
Workflow Template WS00200099 (Putting a Service Notification in Process)
You can define your own workflow.
Regards,
Srilatha.

Accounting entries are not reversed

Dear Sir/Madam,
We have canceled an excise invoice through transaction code J1IS. The
excise invoice was for other movements and created in J1IS only. The
excise entries were canceled but the accounting entries are not canceledafter the cancellation.
how to cancel the accounting entries and why the accounting entries are
not canceled after cancellation of excise invoice.
regards
Ashish

Hello Ashish,
Cancellation of part 2 (FI) has to be done through J1IH > Cancel EI.
If you have run in J1IS, then you have to reverse the FI document in FB08.
With Best Regards,
Gladys Xing

While deleting project from CJ20N entries are not deleted from table PRPS

Hi,
I am deleting project from CJ20N then from PROJ table entries are getting deleted but WBS element entries are not deleted from table PRPS.
Any deletion Flag should also be checked?
Thanks in advance!
Regards,
Jyoti

Hello,
Thanks for reply !
My problem is I am deleting project and WBS Elements from CJ20N but WBS element entries are not deleted from PRPS table.
Why they are appearing in PRPS table and how it can be deleted?
Thanks !

Batch element raise error for few cases as Multiple entries are not allowed

Dear
Element type :' NON-RECURRING'
Multiple entry :' un-checked'
We have a commission element as non-recurring. As per company policy we allow this commission on Assignment criteria and it got successfully transfer we run it previous month. But today we are doing the same activity and getting error “Multiple entries are not allowed for this entry” in two cases while batch validation. However when we enter this element manually under the assignment element entry window, it allow user to save without any restriction.
So, why system not allow it through batch window.
I am very thank full to you, pls very critical.
Pls advice.

User uploaded duplicate assignment for the same element, therefore system was not being allowed to process for that batch. we removed duplicate record and the error was removed.

Af:commandMenuItem action and actionListener are not executing

Hello all!
I use JDeveloper Studio Edition Version 11.1.1.2.0. Here's the problem. I have a popup menu like this
<af:popup id="someMenu" animate="default">
<af:menu id="pt_m1">
<af:forEach var="item" items="#{ContextMenuHelperBean.availableUserRoles}">
<af:commandMenuItem text="#{item.roleName}"
action="#{ContextMenuHelperBean.changeUserRole_Action}"
actionListener="#{ContextMenuHelperBean.changeUserRole_ActionListener}"
immediate="true"
partialSubmit="false"
id="pt_cmi1" rendered="true">
<f:attribute name="userRole" value="#{item}"/>
</af:commandMenuItem>
</af:forEach>
</af:menu>
</af:popup>
The problem is that action and actionListener are not executing, when the menu item is selected (but the page is reloaded with no changes). ContextMenuHelperBean has a "session" scope set in adfc-config.xml. What can be wrong with this?

Now I've encountered a new kind of error. I create a menu in a managed bean like this:
In JSPX
<f:view beforePhase="#{RolesMenuSupportBean.createMenus}">
<af:popup id="cxtMenu" animate="default">
                        <af:menu id="pt_m1"
                                 binding="#{RolesMenuSupportBean.rolesMenu}">
                        </af:menu>
                      </af:popup>In com\cs\webb2\view\utils\menu\RolesMenuSupport.java
    public void createMenus(PhaseEvent phaseEvent) {
        List<IUserRole> rolesList = getAvailableUserRoles();
        for (IUserRole role: rolesList) {
            Boolean hasItem = false;
            for (Iterator iter = rolesMenu.getChildren().iterator(); iter.hasNext(); ) {
                RichCommandMenuItem item = (RichCommandMenuItem) iter.next();
                if (!hasItem)
                    hasItem = item.getText().equalsIgnoreCase(role.getRoleName());
            if (!hasItem) {
                RichCommandMenuItem newItem = new RichCommandMenuItem();
                newItem.getAttributes().put("userRole", role);
                newItem.setText(role.getRoleName());
                newItem.setId(ITEM_ID);
                newItem.setActionExpression(getActionExpression("#{RolesMenuSupportBean.changeUserRole_Action}"));
                newItem.addActionListener(getExpressionActionListener("#{RolesMenuSupportBean.changeUserRole_ActionListener}"));
                rolesMenu.getChildren().add(newItem);
    } The menu is created successfully, but when I click on any item, I get an exception
<b>javax.servlet.ServletException: Method not found: com.cs.webb2.view.utils.menu.RolesMenuSupport@d4702.changeUserRole_Action(void)</b>
But of course I have such a method in my com.cs.webb2.view.utils.menu.RolesMenuSupport:
In com\cs\webb2\view\utils\menu\RolesMenuSupport.java
    public String changeUserRole_Action()
        System.out.println("Action!");
        // no code yet
        return "adfMenu_Main";
    }And there <b>is</b> a managed bean named RolesMenuSupportBean, which is associated with class com.cs.webb2.view.utils.menu.RolesMenuSupport.
Can anyone tell me, what can be wrong?

BI content -- Transfer rules are not mapping automatically

Have any one come across with this issue.
We have connected R/3 system to multiple BI systems.
Eg: we have 1 ECC6 & 2 BI systems.
Business Scenario is .
I have two different Companyu2019s A & B in two different Network Domains ( Domain 1 & Domain2 ).
u201C A u201C Have Ecc6 & BI in the Network Domain1
u201C B u201C Have ECC6 & BI in the Network Domain2.
With in the Individual Domain ECC6 & BI is working Fine.
Issue : -
When I connected Company u201C A u201C Ecc6 ( Domain1 ) to Company u201C B u201C BI system ( Domain2 ).
The connection is showing OK.
Replication is also OK,
But BI content installation have issue, Transfer rules are not mapping automatically with Standard Data sources ( Eg: 0HR_PA_0 ).
Thanks in Advanceu2026
@Shaik...
Pls this is critical issue ... Basis people is saying this is not the issue of Basis..Connection is OK ...SO . it is the issue of BI only.
any one Advice me ....
Edited by: shaik on Aug 24, 2008 5:39 PM

Hi Raghavendra,
Thanks for Replay,
Can you explain me how to check the data mart Connection ?
what i am doing is ....
step 1: Connection is OK.
step 2 : Replication is OK.
step 3 : I am going to Install BC Infosource ( Eg: 0HR_PA_1 )
Grouping -
In data flow before.
source system -
i check the Ecc6 system which is in different domain.
then i drag the infosource ..... the transfer rules are not mapping ( Not coming )
pls Advice....
@ SHAIK...
Edited by: shaik on Aug 27, 2008 12:41 PM

The prices are not coming automatically

Hi gurus,
In batch determination. When i am creating a sales order the batch number is coming automatically. But the thing is the prices are not coming automatically. what could be the reason. Even though i maintained the prices conditon records in vch1 but the system not picking up automatically. Please give the solution. It is urgent
Thanks & Regards
cheers

Hi,
Batch valuation is possible with the std functionality.
It will allow to valuate each batch saperately.
More information,
http://help.sap.com/saphelp_46c/helpdata/en/61/969838e914a20de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/25/2839124f7811d18a150000e816ae6e/frameset.htm
Valuation for a Single Batch
Use
You use valuation for a single batch if you want to separate costs for externally processed batches from costs for internally processed batches, and if you want to keep the price and value of each individual batch in inventory management on a value basis.
Integration
Valuation for a single batch is carried out using separate values, just as partial stocks for a material are distinguished according to origin, for example. In valuation for a single batch, a separate characteristic category is created for each batch (batch number = characteristic category).
Valuation for a single batch is a special kind of valuation type for batches.
Prerequisites :To work with valuation for a single batch, you must choose valuation for a single batch (indicator X in the standard system) as substance characteristic type in the material master record.
regards,
Siddharth.

Work Flow EVENT - SM58 Entries are not executing automatically

Similar Messages

Maybe you are looking for