Work flow for PO and PR release

Hi ,
I am working in one of the implementation project , it's ECC 6.00 version . I have some question ,
1. Is it basic workflow pakage comes with ECC 6.00 .
2. How to activate for PO and PR related release in MM, I need details about end to end configaration . We don't have any workflow consultant in project .
If any one have configarion document for above please send .
Regards
RB

Hi,
Release of Purchase Order :WS20000075
And for two levels of approvals you have to configure in SPRO the path is
Purchase Order:
SPRO> Material Management->Purchasing->/Purchase order-->Release procedure ---> Procedure with classification ---> set up procedure with classification ---> double click on Release strategies and Workflow.
Purchase requisition release (WS00000038)
similar configuration.
Regards,
N.

Similar Messages

Create work flow for date and quantity change in Purchase order

Hi SAP Guru's,
Kindly share abt how to create a workflow in SAP for purchase order date and quantity change and link it with SAP PS.
Scenerio : If someone change the Date n Quantiy of PO , the system should trigger a mail to the person responsible.
Thanks a Lot
Regards
Janani

I did create a Workflow in SWDD for PO date n quantity change , but am not sure how to map the same with the project . Kindly explain step by step.
Thanks
Janani A

Re: Work flow for resource / work center in MEINT

Hello Experts,
We are working on SAP ME 15.0 recently installed. We are trying to send the work center from ECC to ME. In MEINT we see only the following work flow for work center / resource:
As can be seen, LOIWCS02 is not there. When we sent work center (category 9100) with LOIWCS02 IDoc type, it failed in MEINT. But when we sent work center from ECC (category 9100) using IDoc type 9100, it was processed successfully in MEINT but it created work center in ME.
The other component LOIWCS02_ME_RES or LOIWCS02_ME_WC is not getting called. What is the possible reason and resolution?
Would be thankful for any feedback on this.
Thanks in advance
Srinivas

Hello Alexander,
Thanks for the quick reply.
As per the help document, the work center category 9100 is supposed to create a Resource in SAP ME but it ends up creating work center in ME.
If you see the screen shot I had put in my query, I see that there are three work flows - one for LOIWCS03 and the other two for LOIWCS02_RES and LOIWCS02_RES. Would this make any difference since I would expect that the work flow for RES and WC should also be in line with LOIWCS03?
I will be asking my tech team to raise a support incident for this. Meanwhile I would appreciate your reply on this.
Thanks
Srinivas

Regarding work flow for credit block release in sales order

Dear Experts,
Kindly help me with work flow-
my scenario is if customers credit limit of 5000$ exceeds in sales order it should be blocked and notification should go to authorize person through simple mail to release this block.
for this i have done settings in out control i have used output type krml and determined partner as employee responsible to release block in customer master but mail is not triggered to authorized person for credit block and how i can create work flow for this so that authorized person should get notify for credit block as well he releases block also.
Regards
Supriya

Dear supriyaparimal,
Please find the below points to fix your issue.
1. Configure the out put determination by using the condition type KRML.(Hope oyu have done it already).
2.Maintain the condition records in VV11 for condition type "KRML"
3.Then select the condition record and click the communication tab .
4. If you want to give any information you can use "Note for recipient".
5. If the information has to be sent to relevant person you recipient name in the recipient column.
Save the documnet.
If you raise the sales order and if it is blocked then system automatically send the information to respective person.
You can get this in formation in ""SBWP" transaction code.
Check the in box, the information what you have mentioned in the condition records will be appeared.
Please let me know if you have any clarifications
Thanks&Regards
raghu.k

Using work-flow for payment release

Dear Experts
I have a problem when using work-flow for payment release:
I am using ws00400012 as standard work-flow for payment release ,after posting invoice documents via FB60 BSEG is crated but BKPFID dose not exist in container .
when I test this work-flow it is running correctly via SWUS.
It would be very helpful if someone can help me with this problem.
Thanks and best regards,
Azam

http://help.sap.com/saphelp_46c/helpdata/en/6e/1217de9f0411d189b80000e829fbbd/frameset.htm
Goto Accounts Payable (FI-AP) and in that "Vendor Down Payment Processing".
Check out the link for workflow scenarios.. http://help.sap.com/erp2005_ehp_03/helpdata/EN/04/926f8546f311d189470000e829fbbd/frameset.htm
Goto "Archiving Application Data (FI)" and check if your scenario exists or not !!!
Regards,
PR.

Work flow for release of PO

HI,
I am doing customization settings for work flow for release of PO (Task customizing over view).
If the PO created Auto mail should go to the releaser.
I configured as below.
1) I assigned Agent in Task customizing over view.
2) If I go to activate event linking >>work flow for release of PO it is deactivated.
If I activate manually after creating PO it will be deactivated.
Pls Help on this.

In event linkages , tick 'Linkage activate' and in 'Behavior Upon Error Feedback' select value as 3 (Do not change linkage'.

Trigger Work Flow for payment release

hi guys,
kindly help me how to trigger the standard work flow for Payment release ((WS00400012).
With Regards
Pradeep N

enter the Workflow
in SWDD : WS00400012
click on Agent Assignment and assign the Approver USer ID.
click on the event linkage and activate and save.

Approval work flow for Role based and Resource based

Hi All,
We have to implement approval work flow for the following things in OIM 9.1.0.1
Approval work flow for Functional Roles (Groups in OIM) (Approvalsrequired for users to get these roles)
IT Roles (Resources in OIM) (Approvalsrequired for users to get these resource)
Functional Role (Group) contains policy1,polici2. Polciy1 contains res1,res2 and Policy2 contain res3,res4.I want to create approval work flow for this Functional Role to achieve the following
User raise a request for the functional role, then it should wait to get manager approval. then once its gets approval, that user account should create on all resources which are involved in that group.
And, I have to define approoval work flow for all individual resources to get users account creation on target with approvals. These resources may include in the groups as well.
After getting approval for functional role (Group), then Will OIM starts the approval flow for all resources involved in the group? becase, all resources have approval workflow at resource level also.
My Goal: Approval work flow for Group, should not process the approval work flow for resource. can we do it in OIM 9.1.0.1?
And can we do the same in OIM 11g also?
Please help me and do let me know, if you need any information from my end.
Thanks.

Thats configurable buddy ! ! And possible in 10G and 11G both versions.
Functional Roles : These are the groups/roles in OIM 10g/11g with access policies attached at the backend.
- Create a dummy resource and name it Request Role or anything as you like. Attach an Object Form to it and have form field for Role Name, this would be a lookup type field linked to all OIM groups (leave system values using lookup query). So a user can select any OIM Group in this request as per configuration. Have approval workflows defined on this dummy resource Request Role and in its Provisioning Process make user/s a part of the requested group.
- Now once the user is made a part of the group, the associated access policy would be invoked automatically and thereby provisioning. The only thing you need to keep in mind is that create the access policy without approval (there is a check box). If you do this the approvals would never be invoked even if you assign a group manually to the user coz it suppresses all the approvals in this access policy.
IT Roles : These would be linked to the resource and you can define individual approvals on the resources as required.These approvals would be required if someone raises a request for these resources individually.
Thanks
Sunny

Work Flow for Manually Disabling Account and Reporting on Disabling Account

Hi All
THis is my First Time To Create Work Flow for Idm Project Please Help me
i want Work Flow for Manually Disabling Account and Reporting on Disabling Accounts
Please Tell me How I will have to start, to create the code, I know how to configure but may be I will use BPEL or Through Netbeans and plugin I will use.
please provide me sample code, so that I can start workflow work

Thats configurable buddy ! ! And possible in 10G and 11G both versions.
Functional Roles : These are the groups/roles in OIM 10g/11g with access policies attached at the backend.
- Create a dummy resource and name it Request Role or anything as you like. Attach an Object Form to it and have form field for Role Name, this would be a lookup type field linked to all OIM groups (leave system values using lookup query). So a user can select any OIM Group in this request as per configuration. Have approval workflows defined on this dummy resource Request Role and in its Provisioning Process make user/s a part of the requested group.
- Now once the user is made a part of the group, the associated access policy would be invoked automatically and thereby provisioning. The only thing you need to keep in mind is that create the access policy without approval (there is a check box). If you do this the approvals would never be invoked even if you assign a group manually to the user coz it suppresses all the approvals in this access policy.
IT Roles : These would be linked to the resource and you can define individual approvals on the resources as required.These approvals would be required if someone raises a request for these resources individually.
Thanks
Sunny

Work Flow for Purchase Order

Dear All,
How to create Business Work Flow for Purchase Order Creation and its release process.
I want to create purchase order and forward for release process. I want to done all this process through Work Flow.
So can anybody guide me step-by-step guidance for Purchase order creates & release process through SWDD?
Regards,
Mahesh Wagh

Hi Mahesh,
See this link. It might help you.
[https://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE%20PROCEDURE#RELEASEPROCEDURE-RELEASEPROCEDURE]
Thanks&Regards,
Manjula.S

Triggering a sub work flow for multiple users at same time.

I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
How can this be achieved?

Tyr to do like this,
1. First include the subworkflow in the main workflow template.
2. Now include standard Block Step in the main workflow template.
3. In the block select the block type as ParForEach.
4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing assign the multiline container element name in the for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
&COSTCENTER[&_WF_PARFOREACH_INDEX&]& --------> &_COSTCENTER_LINE&
Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated.

Work flow for Goods issue MIGO_GI

Hi friends,
I want to develop a work flow for good issue MIGO_GI transaction. Is there any standard work flow this scenario.
When I deliver the 4 materials, the Material cost is 100*4 = 400, if the Material cost is greatr than 500, mail should trigger to the manager, if it less it will go to the first approver.
please advice me in this.,
regards,
Ajay

I think no stanadard workflow will provide you with such a validation, Better to design your own customized workflow template,
Follow the below steps.
1. Open PFTC select the task type workflow template
2. Click F5 and define the relevant fields and make the agent assignemnt for the workflow template as general task from the menu addtional agent ---> agent assginement --> maintain --> general task.
3. Check the BOR BUS2017 this might be useful.
Check the method GoodsMovement.SAPCreate and its parameters interface, if you can get the total values of the then include a condition and validate th total cost if is satrisfyies send mail and workitem to approver, if it does not satisfy then send only workitem to approver.
Check the below BADI's
MB_BAPI_GOODSMVT_CREATE        MB_GOODSMOVEMENT
MB_BATCH_MASTER                MB_GOODSMOVEMENT
MB_DOCUMENT_BADI               MB_GOODSMOVEMENT
from where you can trigger your customized workflow by using the standard fm SAP_WAPI_CREATE_EVENT or SAP_WAPI_START_WORKFLOW*

Work Flow for Service Entry Sheet

Hi all,
We need Work Flow for Service Entry Sheet as below using SAP mail box :
Once Created, will go to Incharge for varification.
If yes, will go to Manager for further varification.
If yes, will go to again Incharge back for Release.
Regards,
Hamadeh Bashir
Gulf Petrochemical Industries Company,
Bahrain

Hi,
Object Type BUS2080 (Service Notification)
Standard Task TS00008336 (Processing a Service Notification)
Workflow Template WS00200099 (Putting a Service Notification in Process)
You can define your own workflow.
Regards,
Srilatha.

Work flow for Rejections in Quality- Usage decision

Dear all
We are in the process of activating work flow for Quality Inspection, During Usage decision there may be rejections for which we need to trigger a mail to the Internal department , stating the Remarks, description, rejected quantity etc ,
If any one has come across the same scenario kindly help us so as to implement the same in our organization.
Regards
Rahul Bhat

Hi,
You can do any of the following according to you Requirement.
1) Below the Rejection Branch using the Send mail you can send the mail to Respective person.
2) Other wise using the Function Module you can send the mail, refer this l[ink|https://wiki.sdn.sap.com/wiki/x/nYKdAw ].
3) Else place this Std. Task TS20000139 and provide the necessary binding below the Rejection branch a popup will open and the user can enter the comments and it will go to the Person whom you want.
Try any of this according to you requirement.
Regards,
Surjith Kumar

Typical work flow for porting c/c++ libraries?

I'm new to the whole Alchemy world and I'm also very rusty regarding my knowledge in C/C++ (which was never that good to begin with). This is making my experimenting with Alchemy somewhat difficult, since I don't know if the problems I have are related to me not understanding the C-compiling process or the library I'm trying to compile not even being possible to compile using the Alchemy gcc. I've managed to compile some of the samples in the Alchemy download and some "Hello world" level code of my own. But I've yet to fully understand the process of compiling an arbritary C-library to an swc. So, what I'm hoping for is for you guys that have more experience with this to give some pointers about the whole process by answering my questions below.
1. Are there any indicators one can look for in C-libraries to determine if they can be successfully ported? (e.g. only use ANSI-C libs)
2. What would be the typical work flow for porting a C-library after having downloaded it's source? How do you go about starting to build the C<-->AS3 interface? Do you dive into gluegen immediately, or write the glue.c by hand?
3. When should one do ./configure; make etc. to compile a library and when does one simply use gcc alib.c...?
4. Do you have any examples of simple C-libraries one could try to port? With simple I mean libraries that don't have any external dependencies to other libraries and have a relatively small source (say 5-10 files or something).
Feel free to chip in with any answers you may have. And since I'm a n00b, please use idiot-speak as much as possible

Thks for ur reply Jens.
But still it not very much clear to me.
Can you please throw some light in the bellow sinerio :
Let say I want to build an sample music player application in Linux which will be having following module
1) GUI : which contain one button : say PLAY
2) Event handler : for the click event of PLAY Button
3)Plugin for playing music : code wich actually plays the music
So GUI that is button if devolop in FLASH/FLEX
Event handler module will be written in Action Script
Plugin will be written in C which will use gstreamer framework APIs in turn . So these plugin API's should get called from Event Handler i.e Action Script code And here is the place where binding from FLASH to C API's is requried.
So in the above senirio the actual execuable of the application will be nothing but swf file only.
Can I use Alchemy as a glue for binding FLASH & C??
Plz correct me if I am worng.
Please share ur thoughts ...
Thanks in Advance
Kapil

Work flow for PO and PR release

Similar Messages

Maybe you are looking for