Work flow object type for purchase requisition please do reply

helllo anjireddy
pls dont mind spare a lit bit extra time for my query....
am giving u my requirement once again
i have a custom table: the fields in it are storage location,issuing plant,approver user id..
when a PR is created..the storage location(EBAN-lgort) and issuing plant(eban-werks) are to be read into the custom table where there is no data available for the approver user id...and a mail has to be sent to the approver ..when approved/ rejected a mail will be sent to the Requisitioner,approver and creator..
as u said create a subtype of the Business object bus2105 and have to create a Customer Task in PFTC and assign this object and a Method and define a triggering event.
now wat i didnt understand is....when the fields location and plant r read frm the PR there will be no data in the approver user id field in the custom table,then how to get the approver' mail id...?
pls do respond
regards
anik

Hi
You will get the UserID of the Approver from this
then use the Tables USR21 and ADR6 tables to get the mail ID
See the sample:
DATA : lv_pernr LIKE adr6-persnumber,
 lv_adrnr LIKE adr6-addrnumber,
 lv_usrid LIKE pa0105-usrid,
 lv_mail LIKE adr6-smtp_addr.
CLEAR: lv_pernr, lv_usrid, lv_adrnr,
 lv_mail.
lv_usrid = gv_ernam.
SELECT SINGLE persnumber addrnumber FROM usr21
 INTO (lv_pernr,lv_adrnr)
 WHERE bname = lv_usrid.
IF sy-subrc = 0.
 SELECT SINGLE smtp_addr INTO lv_mail FROM adr6
 WHERE addrnumber = lv_adrnr AND
 persnumber = lv_pernr.
 endif.
Reward points if useful
Regards
Anji

Similar Messages

Work flow object type for purchase requisition

hello anji reddy
u asked me to create a Customer Task in PFTC and assign this object and a Method and define a triggering event etc for the workflow to get triggered,but in the triggering events there is no create event in it,so how and where should i create that event and also in the custom table which i have created there is a field approver user id ,where can i get this id frm?when the pr is created the fields storage location and issuing plant will be read and sent to the custom table where the related approver id should be chosen,,but the field will be blank so how to enter data into the approver user id field.....
also in the business object(bus2105) is it that in the program only the create function module should be called and the rest of the fn modules which r there in the sample program which u have sent should be deleted?????????
regards
anik

Hi
It is BUS2009 for Pur Requisition
Hi go to PFTC tcode and enter Workflow template and press F4, it displays all WF templates, then in that search and take the PR related one.
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Predefined object type for Purchase order release stratergy

dear experts,
There are already predefined object type for purchase order like bus2012 where i can create new events and methods. I want to know is there any predefined objects for purchase order release strategy. The requirement is there i want to define method, that should display the po release screen. If i bind this method with work flow template, mail should be triggered and if i click the mail po release screen should be opened for respective material...
regards,
Kandhan G

Hello
I'm using the BUS2012 Object type in workflow task but in simulation the task run correct but in the transaction when modify a purchase orden the task send an error...
maybe the error is similar...did you solve this problem?..
Thanks!
Wladimir E.
[email protected]

How do I enter Document Type for Purchase requisition IDOC

Hello,
File - IDOC (PREQCR.PREQCR02)
The file is getting picked up and shows up a checkered flag in Moni..
but in WE05, on R3 side, i see an error message
"Enter Document Type"
How do I enter document type for Purchase requisition IDOC?
will that solve this issue?
thanks and regards
Nikhil.

Hi,
For error 51, you need to set the default document type in the inbound processing FM of the IDOC
Standard type - NB
Subcontrator type
Blank PO
Service PO
Stock transport PO.
Document types is used for below things,
1. It controls the no. range of the document i.e. the doc no.
2. It controls whether doc no. is auto assigned or manually entered
3. It controls the field status of the doc header fields i.e. whether input is mandatory or optional
4. It controls the physical doc filing
Thanks
Swarup

Multiple Document Types For Purchase Requisition For Different Order Types

Dear SAP Gurus,
I want to have different document types of Purchase Requisition for different Order types.
For Example:
for Order Type ZT01- Document Type used should be YR01
for Order Type YA01- Document Type used should be ZR01
How could this be achieved?
Regards.

hi
Kindly check the user exit for the same
COZF0001 or COZF0002
regards
thyagarajan

UB doc type for Purchase requisition

Hi
Please inform is it standard to have UB type purchase requisition.
regards
arvind

HI,
you meant to say UB -Stock transport order doc type?
We have have it based on the Business requirement,which says a requirement have to be generated from the user for the stock transport and can be Processed after approval ,then it can be used or else it is not required.
we can process the same using the PO- UB.
regards
Anjanna.

WORK FLOW OBJECT FOR T CODE FI:- FB50 WHILE PARKING A DOCUMENT

HI
PLS SUGGEST ME WORK FLOW OBJECT NAME FOR TRANSACTION CODE FB50 WHILE PARKING THE DOCUMENT.
THANKS AND REGARDS
VINAY BHASKAR
Moderator message: please do more research before asking, do not post in all upper case ("shouting").
Edited by: Thomas Zloch on Jun 17, 2011 12:59 PM

hi
Go to FS00
enter GL account no & Comp Code.
Click Change button
You might have to seek help of an FI consultant to do so.
Also in KA01 create this G/L account as a cost element against your controlling area assigned to your Chart of Accounts, you can do so by clicking on Extra's tab in transaction KA01
Regards

Account assignement category for purchase requisition - error message

Hi All!
I created a new Item category in service order (IW31) "O" with the account assignment category "O". If I don't set the Consumption posting indicator to V for this category, when I set the account assignment category "O" to the purchase requisition in Plant Maintenance and Customer Service-Maintenance and Service Processing-Maintenance and Service Orders-General Data-Define Account Assignment Category/Document Type for Purchase Requisitions, I receive the message:
"Acct. assign. cat. "O" for purchase req. does not exist.
Message no. CS 075"
The client request is not to charge immediately for the goods receipt with the relevant costs the service order. The client wants to create the goods receipt in a storage location for the plant and then confirm the components and charge the costs after the component confirmation (movement type 261) - similar to stock material.
Any idea about what should I do?
Thank you.

Hi Everyone,
The problem is solved now. The cause was that the test requisition that I was making was satisfying more than one rules and hence I end dated the remaining rules which solved the problem.
Thanks!

Release strategy for purchase requisition does not kick in

Hi Gurus!
I've been struggling with this issue for some weeks now.
I have set up the release strategy configuration for purchase requisitions with classifications.
However, if I create a purchase requisition the release functionality is not taken into account by the system.
See below some more information regarding my configuration:
1. I've created a new characteristic "REL_PR_GROUP". Status: released, Multiple values, Number of Chars 3, 7 values (TR1, TR2, TR3....TR7), Table name: CEBAN, Field name: EKGRP, Procedure for value assignment set to not ready for input.
2. I've created a new class: "REL_PR_ANPC". Class type 032, Status: released, Same classification: do not check, Char: "REL_PR_GROUP"
3. I have one release group "T1", Rel. object 1, OverReqRel is marked, Class: "REL_PR_ANPC"
4. I have 5 release codes. Grp: T1, Code: 01....05
5. I have 2 release indicators:
"R = Released", Rel. for ordering is marked, Changeabil: 4, Value chgs. 100,0
"X = Blocked", Changeabil: 4, Value chgs. 100,0
6. I have 1 release strategy:
"T1 with Grp T1"
- one release group, 01 Manager
- release prerequisites not applicable because of only one release group
- release status, nothing marked = blocked, 01 marked = released
- classification, purchasing group is TR1 or TR2 or TR3 or TR4 or TR5 or TR6 or TR7
I intentionally kept the configuration as simple as possible so I can try to get it working first.
Now if I create a purchase requisition for an item with release group T1, I would expect the release strategy to be activated. However, this is not the case. I don't see the "release status" tab in the PR, and if I try to relase via ME54 the system says the PR is not relevant for release.
Could you please assist in getting this working?

Hi,
Have you checked in CL30/CL30N if your release strategy is derived successfully?
See section 3 of Note 365604. A small section of it:
You can use transaction CL30 search for an object using the data
of the purchase requisition/purchase order. Here, it is important
that the object search determines exactly one strategy. If this
is not the case, this indicates that there are overlapping
strategies in the system or that the release strategies in
Customizing do not correspond with those from transaction CL24.
See the previous point. If the object search returns more than
one result, the system subsequently determines an incorrect
release strategy or no release strategy at all.
If it is derived successfully, next, check the user exit EXIT_SAPLEBND_001 as per Note 371667:
The following assignment statement has to exist within activated SAP
enhancements M06B0002 (include zxm06u13) and M06B0005 (include zxm06u31)
for purchase requisitions:
E_CEBAN = I_CEBAN.
Regards,
Purnima.

AME for Purchase Requisitions

Hello All
I am in the process of setting up AME in R12.1.2 for purchase requisitions and got struck with an issue
My requirement is to route the requisition to a particular job based on the item category and the requisition total. I setup conditions, action types and approval groups and then the rule.
When I used static in my Approval Group setup it works fine with out issues however we do not want to use static as employees keep changing and want my approval driven out of the job hence updated the approval group to use Dynamic usage type and used the below query to pick the name of the employee based on the job.
select papf.full_name from per_all_assignments_f paaf, per_all_people_f papf, per_jobs pej where
paaf.person_id = papf.person_id
and sysdate between paaf.effective_start_date and paaf.effective_end_date
and paaf.job_id = pej.job_id
and pej.name like 'IT.Group IT Operations Manager.Staff'
Now when trying to create a requisition it shows up a message that "Approval List could not be generated. Please contact your System Administrator to review AME rules setup."
When validated the above query it says query is valid but still not working. I even tried with person_id but still no luck
Thanks a ton in advance
Regards
Dilip

Hi Dilip,
Pl. visit following links.
AME for iProcurement requisitions
Re: AME-Hierarchy Deciding Feature ?
HTH
Sanjay

Can't use Overall Release for Purchase Requisitions

I have two groups, AA and ZZ. Each group has it's own Class.
Group AA uses Cost Center Class (CN) (uses Characteristics Cost Center and Line Amount)
Group ZZ uses Order Class (OC) (uses Characteristic Order)
I have built one and only one Release Strategy for each of these Groups. These Strategies both work successfully when I select the other group to be the group for Overall Release. That is, if I set ZZ to be for Overall Release, then create a requisition, the release strategy for Group AA is applied successfully. However, if I modify the req the strategy for ZZ, does not get applied.
The opposite is true. When AA is set to be for Overall release, then ZZ works. However, if I modify the req, then AA's release strategy does not get applied.
Again, both strategies work correctly when the other Group is set to be the one to use for Overall Release. However, neither strategy works if its group is set to be the one for Overall Release.
What am I missing? I only have two classes, two groups, and two release strategies.

SAP Standard system allows only 8 levels of release codes.If client requirement is more than 8 then for excess release codes customisation is done by the technical team (Abapers).Lets take an example of 15 release levels required for a client according to his Business needs then in this case initial 7 codes are customised and remaining 8 release codes are configured in the system.
Release procedure is of two types
Release Procedure without classification
             This procedure is applicable only for Purchase Requisitions.
             Here PR is released Item by Item only.
Release Procedure with classification
            This procedure is applicable to PR,RFQ,Service Entry sheet,RFQ,PO,Contract and scheduling agreements.
            Item by Item and Header level releases can be configured
            For PR - both item by item and Header level release can be configured
            For external purchasing documents - Release is possible only at Header level.
Step 1:
Create Characteristics
In this step we need to create characteristics - conditions to be satisfied for triggering Release startegy.For example client has asked to set release strategy based on 3 inputs.Combination of value, Plant and Purchasing group
            1) Total value of PR more than Rs 50,000
               create characteristic as "Release_PR_total_value" in transaction code CT04.
              Tab - Basic data " Data type --- CURR currency format", "Decimal places - eg. 2 " and "currency eg. INR or USD"
              Tab -values key in > 50000 INR
              Tab - Additional Data- Table Name "CEBAN" and Field Name "GSWRT"
              Tab - Restrictions - class type - 032 - Release strategy
            2) Plant
                 Create characteristic "Release_PR_plant" in transaction code CT04.
                 Tab - Basic data - Data type - CHAR; Number of chars - 4
                 Tab - Values - Key in all the plants for which you are required to configure release proc. eg. 1000,2000,3000
                 Tab - Additional data - Table name CEBAN and Field Name is WERKS.
            3) Purchaisng Group
                 Create characteristic "Release_PR_PurchasingGroup" in TCode CT04
                Tab - Basic data - Data Type - char, Number of chars eg. 3
                Tab - values - Key in all the purchasing Groups for which Release proc. is to be configured as required by Client.
                Tab - Addnl Data - Table Name CEKKO and field name - EKGRP
Step 2:
Define class in transaction code CL02
Menu path SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>Edit classes
Here we assign all the above created Characteristics to a CLASS so that a release strategy to be triggered when all the conditions are met.
Create a new class with free choice of names as "PR_Release_proc" in transaction code CL02.*Key in the class name and select class type as 032 - RELEASE STRATEGY then click on symbol create to enter all the details as mentioned below.
Tab - Basic data - Enter description as "PR_Release-Proc",
status- Released, Same classification - check the push button - Warning Message
Tab- CHAR Enter above created 3 characteristics
1.Release_PR_total_value
2.Release_PR_plant
3.Release_PR_PurchasingGroup
step3:
Menu path is
SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>set up procedure with classification>
here define
1.Release Groups
Release group 01 is used for Purchase requisitions and 02 for Purchase orders.
Here assign class "PR_Release_proc" against release code "01"
check "OvRelPReq" indicator for over all release (All line items )of document in one shot else it will be released line item wise.
2.Release codes
Release codes are assigned to Release groups, in Workflow these release codes are tagged to users' SAP IDs through which they will be able to approve or reject a PR in SBWP(Inbox in SAP Business workplace.
PRs are released by users in transaction code ME54N.
Eg
Type of user            - Level -             Release code
PR creator - clerk or Business user -
Approver    - Supervisor                 -   R1
Approver -   Project Lead              -   R2
Approver   - Asst. Manager             - R3
Approver   - HOD/General Manager - R4
Release codes R1 to R5 are assigned to corresponding users.Manager R4 can only approve the PR if prior approvals till R3 are completed else not in ideal situation.
For detailed info please refer
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
3. Release Indicator:
Release indicators show the release status of a Purchase Requisition.
For detailed info please refer SAP Help official site
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
4.Release Pre requisites:
These define the order in which individuals or departments release the PR in sequence.
3.Release strategies
Create a new release startegy eg ."A1" or "U1" , write its description PR release for value >1 lakh
Now select release codes according to the Chart of Authority set by your client.
Eg.
Release startegy " A1 - PR release for value >1 lakh"
R1 - Supervisor
R2- Project Lead
R3- Asst. Manager
R4- General Manager
Now click on" Release Prerequisites "push button and check all the boxes in ascending order.Save the document
click on "Release statuses" push button, check release statuses then click on "Continue" push button.
In third push button you can maintain CLASSIFICATION data or later you can directly mainatain in transaction code CL20N for this strategy.
Classification data for example
1. Value - > 100000
2. Plant - 1000,2000,3000 etc
3. Purchasing groups - 101,102,103 etc
By clicking on "Release Simulation" push button you can check whether release is getting affected for configured release codes or not.
In this way you can configure all the required Release startegies.
Now create a PR in T code ME51N with the above conditions then a new tab will appear in PR creation screen at the time of check.Save the document and this can be released by respective users in TCode ME54N.
Tcode - ME54N - For Individual Release
Tcode - ME55 - For Collective Release
For detailed info please visit SAP HELP website
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
Regards,
Indranil

Business object type for parked invoices

Hi,
We are using documentum to store documents that have been attached to business object types in SAP. The business object types are configured in transaction OAC3 to point to a pre-configured content repository.
Having this configuration allows the object type to use the "services for objects" option, enabling it to store attachments.
The business object types for invoices have been configured and we are able to store attachments. However this does not seem to work for "Parked invoices". The configuration in the "services for objects" component is not there and the feature to store the attachment is disabled.
As the configuration needs to be done for all object types that need to be able to store attachments, maybe someone here can indicate what the object type is for parked invoices. Alternatively, maybe there is a way to look up the various business object types.
Any help you can provide is appreciated.
Thanks.
Kind Regards,
Giwan

Hi ,
Thank You for your reply.
I created inquiry . it takes BUS2031.But BUS2031 is used for quotation.But that inquiry is open in VA12(Change Inquiry) Transaction,not open in VA22(Change Quotation).
Is there any setting for BOR object types to Document Types.
Please give me a reply as early as possible.It's very urgent.
Thanks,
Saritha

Custom Event for Purchase Requisition Create, Change & Delete

Hello Experts,
I want to create a custom event which triggers on Purchase Requisition Create, SAP provide's standard event's for purchase requisition release but not for create.
What are all the steps and how to create a new event.
Thanks in Adavance,
Sandhya.

Hi Sandhya,
may i know the reason why you are trying to create custom methods.
You have business object BUS2009(for PR line item wise release) and BUS2105(for PR overall release).
Both those business object have events RELEASESTEPCREATED (for PR creation) and SIGNIFICANTLYCHANGED(For PR change).
Even then if you want to create custom events, create a subtype of the standard business object, then click on events, and then select create. Now create your Z-events, say ZCREATED (For creation), ZCHANGED (for changed) and ZDELETED (for deleted). Now select each event, click on edit -> Change release status -> object type component -> to be implemented. Follow the same for all the events. Then select each event, click on edit -> Change release status -> object type component -> to be released.
Now click on your custom object, click on edit -> Change release status -> object type component -> to be implemented.Then click on your custom object, click on edit -> Change release status -> object type component -> to be released.
After this in SWEC tcode, click on new entries. Select change document object as BANF, business object as say ZBUS2105 and event as ZCREATED. make sure radio button on create is checked.
Similary create entries for ZCHANGED event and ZDELETED.
Select on change and on delete radio button for event ZCHANGED and ZDELETED event respectively.
let me know if you have any queries.
Regards,
Raj

Need to attach document for Purchase requisition usingBAPI_DOCUMENT_CREATE

Hi All,
Requirement:
Attach document(PDF,TXT etc) for purchase requisition using BSP service.
For this i am finding one function module "BAPI_DOCUMENT_CREATE" please suggest me how to use this function module or its working my requirement or not.
if it possible provide any sample code for BAPI_DOCUMENT_CREATE
So that i can move to another why.
Thanks in advance.
Regards,
Rajeshv.

Hi,
Did you check the function module documentation. It contains one example also. Please check that.
BAPI fm BAPI_DOCUMENT_CREATE is internally calling this BAPI. Please check how it is calling.
Please alos check program LWPLGF06. I think it has similar code.
Thanks,
Ramakrishna
Message was edited by: Ramakrishna Prasad Ramisetti

What is the Object Type for User Define table ?

Dear All Experts,
I create one of the User Define Table with no. of UDF's
I already register User Define Table with Unique ID.
As per my knowledge, Unique ID is our Object type for that User Define Table.
I want to add Transaction Notification Code for created Used Define Table.
This Transaction Notification prevents user to must enter name in that form.
IF (@object_type = 'Z_Roto' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U'))
BEGIN
If not Exists (Select T0.DocEntry from [@Z_ROTO] T0 Where ( T0.Name is null OR T0.Name = ' ' ) AND T0.Code = @list_of_cols_val_tab_del )
begin
SET @error = 1
SET @error_message = 'Name is NULL then So, Please enter ZERO Value i.e. 0 in Filed_Name'
End
End
Please help me for this problem.
Thanks & Regards,
Nishit Makadia

Hi All,
Thanks for your replay.
Below code is working for User Define Table's Transaction Notification
IF (@transaction_type = 'A' OR @transaction_type = 'U') AND @object_type = 'Z_Roto'
BEGIN
If Exists (Select T0.Code from [@Z_ROTO] T0 Where ( T0.Name is null OR T0.Name = ' ' ) AND T0.Code = @list_of_cols_val_tab_del)
begin
select @error = 10
select @error_message = 'Name is NULL then So, Please enter ZERO Value i.e. 0 in Filed_Name'
End
End
Necessary to Remember 4 Things. That are mentioned below.
1) Register User Define Table (UDT) with using "Object Registration Wizard". For Example : @object_type = 'Z_Roto'
2) When you define selection criteria then it must be compulsory for use Code Field. For Example : Select T0.Code from [@Z_Roto]
3) When you define selection criteria then it must be compulsory for use Code for @list_of_cols_val_tab_del.
4) Use error code as 10 Number
Thanks & Regards,
Nishit Makadia

Work flow object type for purchase requisition please do reply

Similar Messages

Maybe you are looking for