Work flow Release procedure

Hi,
We are going to configure workflow for release procedure.
Scenario is like that,Assume in one release strategy 4 release Codes.
So in One Purchase order four Persons has to release.
If one person release the document and rest of all not released that document.
so i want to Send Message to rest of all ,to release PO.
Where can i get the logic.and how can i do it.
Raghu

Hi
from my experience in testing (not completely)the standard workflow WS20000075 I observed that if the all the releasing authorities are assigned as agent in the Task TS20000166 it will automatically activate message to the next releasing authority once the previous releasing authority releases the PO. Further in the Task TS 20000168 what ever agents are assigned it will send mails at each step of release .But all this and other finer points need configuration by a Workflow consultant.
Dhruba

Similar Messages

  • Work flow:release srategy

    Dear All,
    While doing release strategy,i came across the point "Workflow".What does this means?what is its use?how to configure it?
    regards,
    indranil

    http://www.sap-img.com/workflow/sap-workflow.htm
    http://www.sap-img.com/workflow/workflow-faq.htm
    http://www.sap-img.com/workflow/workflow-of-purchase-requisition-release-strategy.htm
    Go through the links may be helpful...

  • Work Flow & Procedure For Transportation Module Of SD

    Dear All,
    Currently, we have just got SD implemented. Now, we shall like to go for the Transportaion Module i.e. Order Booking, delivery and the PGI followed by Auto Invoicing. Now, we wants to go for Transportation Module  i.e. Shipment Creation, Shipment cost calculation , Service Order Creation etc. As we are quite new to this. So, we shall like to know the complete work flow & the procedure  for implementing the same. i.e. in what sequence the various transactions to be used for Master / Transaction.
    Please advise further.
    With Best Regards,
    Sanjeev Chugh

    Thanks for the reply. Definitely, i can share the details to the best of my knowledge about the transportation module.
    This module is basically meant for controlling purpose. Our main objective is to control the Transportaion Charges. Vendor Invoice must be cross verified from the sytem as well.
    Our Current Business Process : As per business process, we are having fixed rates per transporter for the type of vehicle and the source - destination combination. So, whenever, we are stock transferring the material from our mfg. plants to various depots, we are using various transporters (some one are specialised for south, some are spl. for east, so on and so forth). On the receipt of the material, receiver i.e. the destination branch , confirms the material receipt.. MIGO / MIRO etc. . We wants to capture the cost of the shipment as per the system and then on the receipt of the bill from transporter, the same must be cross verified.
    On going thru various documents from Web, I could gather the following details :
    1. After making deliveries, we have to make a shipment document. In our case, max. time it shall be an individual Shipment i.e. Tcode VT01N. Other type of shipment be Collective Shipment, which we use very less no. of times.
    2.  We have to prepare Shipment Cost document by using Tcode VI01
    3. We have to create a service Purchase Order By using ME21N.
    In our business scenario, we shall not be using legs concept as our shipments generally used to be from point to point basis.
    Sir, logically, i know our needs.. But getting stuck at a couple of points ... Like where to define various rates per transporter..That's why, i named the subject as the Work  Flow & Procedure for Tpt.Module.
    I shall like to request you to kindly advise further in this regard or kindly let me know if some study material is available from where i can comes to know about the exact work flow of the Transportation Module As Such.
    From Where I Can Get Help on Any Tcode Usage i.e How to use a Tcode and what be its basic functionality.
    With Best Regards,
    Sanjeev Chugh

  • Release procedure with out classification

    HI, AJIT SINGH HERE,
    after making proper settings in the 'release procedure with out classification', when i try to create a puchase requisation by ME51N to test the working of release procedure ,i'm not getting check boxes of approval levels.
    please guide

    hi
    did u took the pur grp as the chrecteristic for release
    if yes then put the value of pur grp in release strategy
    plz check ur release strategy as per follows
    http://www.sap123.com/showthread.php?t=59
    http://www.sapstudymaterials.com/search/label/0270-MM%20Configuration%3A%20PR%20Release%20Strategy%E2%80%93Basic%20Concept
    regards
    kunal

  • Release Procedures-Classification

    Hi Gurus,
    I am working on Release Procedures. I know where to use with Classification and without Classification. But I am not pretty sure what is this Classification. If any body knows more about Classification please explain me.
    Thanks in advance
    KK

    Hi
    The following link is very useful. I got this link from this forum only in "new to MM/WM" section.
    http://www.sap123.com/showthread.php?t=59
    Regards,
    Jagadeesh

  • Work flow in Release Procedure

    Hi all,
          What are the steps involved to configur Work flow for the Release of Purchase
    orders?
    Yoga

    Hi Yoga,
    Work flow can be configured for release procedure through userexit M06B0001.
    U need to assign the user id to the respective Release codes. Once this has been done, then u will get a mail in Business workplace inbox upon creation of PR/PO. If u double click the work flow item it will take u to ME54n transaction for approval. We have to take Basis team help to define authorisation for Each user. Since the User has to approve only for his relevant role.
    Hope this helps a bit.
    Reward if u find this useful.
    regards
    Anand.C

  • Work Flow and Release procedure

    Hi,
    What is the coorelation between the Work flow and Release Procedure in the MM Module.
    Where exactly they both correlate ????
    Where the Release Procedure stops and where the Work flow takes over ???
    If with an example it wud be easy.
    wth rgds
    SVU123

    check
    /people/sapna.modi/blog/2007/02/19/workflows-for-dummies--introductionpart-i
    /people/sapna.modi/blog/2007/04/27/workflows-for-dummies--workflow-builderpart-ii

  • RELEASE PROCEDURE THROUGH WORK FLOW

    Dear Sirs,
            How to configure Release procedure through work flow for the purchasing documents? Which are the modules integrated for this configuration? Kindly
    give me the procedure in detail.
    Regards
    Yoga

    Hi Anand,
        Thanks for your response. In my question I had not mentioned about the criteria.
    The criteria for release of P.O. is on the basis of net value of the P.O. and there are
    two levels of approval as follows.
    If the Value of P.O. is less than Rs.50,000/=,  approval of level1 is required.
    If the Value of P.O. is greater than or equal to Rs.50,000/=, approval of both level1 and level2 is required.
        1.If the value of P.O. is Rs.30,000/=, then it should appear in the mailbox of level1 only. It should not appear in the mailbox of level2.
        2.If the value of P.O. is Rs.60,000/=, first it should appear in the mailbox of
    level1 and after the approval of level1, it should appear in the mailbox of level2
    for next level of approval.
        Is there any detailed documentation available to cofigure the above scenario.
    Regards
    Yoga

  • Work flow for release strategy for PO & PR

    Hi Gurus
    Can anybody explain workflow for release strategy for PO and PR
    Thanks in advance.
    Atul Kulkarni

    Hi,
    First you set your all required configuration fro release strategy(Class,Char,Rel.Group,Release Strategy ,Release Indicator )
    For Work flow settings,You have to do follwoing configuration:
    MM - purchasing - purchase order - release procedure - Define Release Procedure for Purchase Orders - Work flow - Enter release code, group, user ID, object type as user.
    Creation of work flow object,activation of workflow and other related settings will be done by Techinical  work flow consulant.
    Thanks,
    AMIT

  • Where to assign User Id to agent id in PO release strategy work flow

    Hi Guys
    I have on requirement
    Where to assign User Id to agent id in PO release strategy work flow
    Thanks in advance
    SAP MM

    Hi,
    Check & follow the path:
    SPRO-- > MM ---> Purchasing -> Purchase Order- > Release Procedure for Purchase Orders -
    > Define Release Procedure for Purchase Orders -
    > Workflow
    Here against each release code assign  respective User ID's for Release Code
    Regards,
    Biju K

  • Work flow for release startegy

    Dear experts,
    please guide me to configure the work flow at relesae procedure,
    1 ) if the lower level approved the document, how the mail will goes to next level approval's SBWP ?
    2 ) if the lower level approved the document how the alerting mail will trigger to the next level users mail id ( ex : outlook ) ?
    will reward  points accordingly

    Hi,
    http://www.sap-img.com/workflow/sap-workflow.htm
    http://www.sap-img.com/workflow/workflow-faq.htm
    http://www.sap-img.com/workflow/workflow-of-purchase-requisition-release-strategy.htm

  • SAP Work flow for PO release.

    hi sap Gurus,
    i working on PO release with work flow concept,
    can any one help in this.
    i have done up to release procedure.
    i want config. the work flow.
    can any one give step by step how to do.
    help full answers will be rewarded.
    regards
    kalyan

    hi
    kalyan i have forwarded attachment of po work flow
    to [email protected]
    just check,
    thanks.
    anand

  • PR Release Strategy work flow

    Hi Guys ,
    I have a work flow requirement , In Which i have to know in Purchase requisition items history . how to identify the new item and
    change items for triggering the work flow .
    Here i am using a badi to triger an event . ( BADI :  ME_REQ_POSTED )  
    Any idea , Plz share .
    THanks
    Nags

    Hi,
    First you set your all required configuration fro release strategy(Class,Char,Rel.Group,Release Strategy ,Release Indicator )
    For Work flow settings,You have to do follwoing configuration:
    MM - purchasing - purchase order - release procedure - Define Release Procedure for Purchase Orders - Work flow - Enter release code, group, user ID, object type as user.
    Creation of work flow object,activation of workflow and other related settings will be done by Techinical  work flow consulant.
    Thanks,
    AMIT

  • PR release procedure no longer working-error MEPO 822

    I've raised a message previously regarding PR release problem. Now i've found something that need expert helps to clarify on this.
    Situation :
    One of my client(ABC) implemented release procedure for PR which is not assign to value limit. It is by document type. They had 2 document types; NB and RNB.
      NB = NOT subject to release
      RNB = SUBJECT to release.
    So when they :
    create a PR with document type RNB - it will goes for approval.
    create a PR with document type NB - it will not go to approval.
    It was working fine until after they created a new document type which copied from NB, called ZTP.
      ZTP = NOT subject to release.
    They did not touch anything on PR release configuration. However, the release has no longer working. Means, when they create PR with document type RNB, it will NOT go for approval as it suppose to. I've check in configuration, all are fine.
    Findings:
    I've created a PR, and go to ME45N to release it but system prompt me an error message
    "Purchase requisition 10000066 cannot be released". I check on the message data,  the error coming from MEPO, message number 822.
    So i check in OSS and found a note which is similar to this case.
    Note 939371 - Overall release PR using ME54N gives error MEPO 822
    Link : https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=939371#Text
    But my question is,is it also applied to ME51N and without external application as per my client's case?
    Please anyone help.
    Thanks.

    Hi guys!
    Wants to share something. I had a problem to release my PR. When i want to release PR via ME54N, system give me error message "Purchase requisition 10000066 cannot be released". When i checked message data, it is coming from MEPO Messafe 822. So i asked SAP, they said this one is caused by different issue. Here's the reply from SAP.
    Here's the reply from SAP :
    Purchase requisition 10000066 cannot be released
    Message no. MEPO822
    Now click the other requisition button and let say
    choose Purchase requisition 10000068,
    Execute ME54N again:
    Purchase requisition 10000068 cannot be released
    Message no. MEPO822
    Comment/explanation:
    The log incidence seems not having problem with release
    strategy as it was ok but it was the last PR was called
    everytime ME54N was called. This same as it works in enjoy
    transaction ME21N/ME22N or ME51N/ME52N.
    For example, When using ME21n or ME22n to create or change PO,
    after saving the PO. There are 2 ways to exit the transaction,
    1, enter another T-code or use /n to exit directly.
    2, use 'F3' or the 'green tick' to exit ME21n (or ME22n)
    Then you can access ME23n to see the difference.
    For the 1st way, ME23n won't display the last PO created in ME21n
    For the 2nd way, ME23n will display the last PO just created!!!
    Please see attached consulting note 595627 that explains a new
    functionality as of release 470:
    Due to performance problem, a decision had to be taken about the way to
    use transactions. If you leave transaction ME21N/ME22N via the
    exit button (F3), the expected PO will be displayed next time you use
    these transactions. But if you quit abruptly (/nXXX) the PO number
    won't be saved for the next transaction ME2?N.
    As SAP note is the official document to explain system behavior,
    this document is provided by SAP developement to explain this system
    behavior to customers.
    In your case, you had used ME54N and this was same as you use ME53N.
    The last PO always display. You may try to view Purchase requisition
    with release strategy, for example Release group R1, Rel. strategy
    R1, then after this execute transaction ME54N again, the message
    MEPO822 will not be there anymore.
    Hope this will help you guys if you're having the same problem in future.
    Thanks,
    Crystal.

  • Work flow in release strategy..?

    Hi experts
    Can anybody expalin me what is Work flow in release strategy .
    Exaplain me with some examples for Work flow in release strategy.
    Thanks
    SAP-mm

    You have to carry on the following activites:
    1) Define Organisation Struture
    2) Application specific customizing
    A) Define Characteristic values
    B) Define release codes and make them Workflow relevant
    C) Define release strategy
    Based on the characteristic values the Purchase Order will be applied to a particular release
    strategy and will fall under specific catagory to pass through different level of approvals
    D) Assign release codes to corresponding Orgnisational Objects with ID
    3) Task specific customizing
    A) Activate the event linkage for the standard workflow WS20000075
    B) Do the agent assignment for the TS20000166
    C) Make other two tasks as General Tasks (TS20000168,TS20000167).
    4) Delete the row for event "Releasestepcreated" from SWEC (OSS Notes: 797775)
    Hope this will help you

Maybe you are looking for