WORK FLOW WS00000038 DELETED
Hi to all
Accidentally, I delete the standard work flow WS00000038 (Workflow for requisition release), and now I need use it.
How I do, by to recreate this workflow ?
Thank you very much
Regards
Rodrigo
Hi,
How did you delete the workflow template ??
Anyway..Check with program RSWD_REPLICATE_FROM_9999.
I guess there is a note, thats actually for problem to solve the problems with 'workflow definition not found in version ..'., search for key word RSWD_REPLICATE_FROM_9999 for SAP Notes !!
Good Luck !!
Regards
Krishna Mohan
Similar Messages
-
Grant the access rights to manager run the work flow history report without edit /delete rights
I found that only Team Member / Workspace creator / Administrator can run
the work flow history report. However, we have a Purchase Order request
which need ask the supervisor for 1st approval and manager for 2nd approval.
But those managers want to see who prepare the P.O. and supervisor done the
first approval before their 2nd approval. How can I can grant the access
right to the manager to run the work flow history report for this purpose? I
tried grant the role "team member" to those manager, however, it will also
allow them to modify or delete the entry as they are the team member, but we
only want allow those managers can approve the entry and view the work flow
history without other acces such as add/delete/edit to prevent the human
mistake.
Pls advise how can I do this? Thanks!
RegardsCreate a new role in teaming can fulfill this requirement. Thanks!
"Joey" wrote in message news:_Cvqo.66903$[email protected]. .
I found that only Team Member / Workspace creator / Administrator can run
the work flow history report. However, we have a Purchase Order request
which need ask the supervisor for 1st approval and manager for 2nd approval.
But those managers want to see who prepare the P.O. and supervisor done the
first approval before their 2nd approval. How can I can grant the access
right to the manager to run the work flow history report for this purpose? I
tried grant the role "team member" to those manager, however, it will also
allow them to modify or delete the entry as they are the team member, but we
only want allow those managers can approve the entry and view the work flow
history without other acces such as add/delete/edit to prevent the human
mistake.
Pls advise how can I do this? Thanks!
Regards -
Is it Possible to Delete a Work Flow in SAP
Is it Possible to Delete a Work Flow in SAP
If you mean a work flow item (and not the template which you already got the solution to), then the best thing to do is logically delete it, also known as cancelling. You can do that from the work item view if you have sufficient authorization.
Go to the technical view.
Switch to edit mode.
Observe the buttons that suddenly became available.
If you don't see any buttons for "delete logically" (can't recall the exact text) you don't have sufficient authorization.
2007-03-21 08:42 Message was edited by Kjetil Kilhavn:
Ahhhh... the disadvantage of using the "Previous" link to navigate the list of questions. I didn't see you had posted a new thread. But then again, if you had "Done The Right Thing" and updated your first question instead....
I suggest we share the blame on this one -
File not found error at Attachement link in GroupVote of Human Work Flow
Hi Gurus
In Human Work flow,
I have created the GroupVote and assigned to two person.
I checked "share attachments and comments" to share their issues.
One signed on to WorkApplist and review the forms and attached the file,
The file link was created but it could not be downloaded.
it could not delete.
I tested several times it occured same results.
It did not be happend when this option "share attachments and comments" was not checked.
domain log and opmn log are as below.
<2008-08-25 14:55:15,468> <ERROR> <oracle.bpel.services.workflow> <::> Identity Service Authentication failure.
Identity Service Authentication failure.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
ORABPEL-10528
Identity Service Authentication failure.
Identity Service Authentication failure.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
at oracle.tip.pc.services.identity.jazn.xml.XMLAuthenticationService.authenticateUser(XMLAuthenticationService.java:150)
at oracle.tip.pc.services.identity.jazn.xml.XMLIdentityService.authenticateUser(XMLIdentityService.java:426)
at oracle.bpel.services.workflow.verification.impl.VerificationService.authenticateUser(VerificationService.java:299)
at oracle.bpel.services.workflow.query.impl.TaskQueryService.authenticate(TaskQueryService.java:135)
at worklistapp.servlets.Login.handleRequest(Login.java:101)
at worklistapp.servlets.BaseServlet.doPost(BaseServlet.java:157)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
OAS version is 10.1.3.1.
Any advice will be appricated.
ThanksYou are getting : ORABPEL-10528
Identity Service Authentication failure.
Identity Service Authentication failure.
This means that you have wrong username/password entries in your configuration files. Please recheck them and then things should be fine...
Hope this helps!
Cheers
Anirudh Pucha -
How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.
how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
NO STANDARD PAGE HEADING LINE-SIZE 255.
Declaring internal tables *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
dummy(255) TYPE c,
END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
ematn(18), "Material Number.
menge(13), "Qyantity.
netpr(11), "Net Price.
werks(4), "Plant.
ebelp(5), "Item Number.
END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
lifnr(10), "Vendor A/c No.
bsart(4), "A/c Type.
bedat(8), "Date of creation of PO.
ekorg(4), "Purchasing Organisation.
ekgrp(3), "Purchasing Group.
x_data LIKE TABLE OF it_idata,
END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
Search help for file *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
START-OF-SELECTION.
To upload the data into line structure *
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = it_dummy.
Processing the data from line structure to internal tables *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
IF it_dummy-dummy+0(01) = 'H'.
v_indx = v_indx + 1.
CLEAR it_idata.
REFRESH it_idata.
CLEAR it_me21-x_data.
REFRESH it_me21-x_data.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
it_me21-bsart
it_me21-bedat
it_me21-ekorg
it_me21-ekgrp.
APPEND it_me21.
ELSEIF it_dummy-dummy+0(01) = 'L'.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_idata-ematn
it_idata-menge
it_idata-netpr
it_idata-werks
it_idata-ebelp.
APPEND it_idata TO it_me21-x_data.
MODIFY it_me21 INDEX v_indx.
ENDIF.
ENDLOOP.
To open the group *
PERFORM open_group.
To populate the bdcdata table for header data *
LOOP AT it_me21.
v_count = v_count + 1.
REFRESH it_bdcdata.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0100',
' ' 'BDC_CURSOR' 'EKKO-LIFNR',
' ' 'BDC_OKCODE' '/00',
' ' 'EKKO-LIFNR' it_me21-lifnr,
' ' 'RM06E-BSART' it_me21-bsart,
' ' 'RM06E-BEDAT' it_me21-bedat,
' ' 'EKKO-EKORG' it_me21-ekorg,
' ' 'EKKO-EKGRP' it_me21-ekgrp,
' ' 'RM06E-LPEIN' 'T'.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
LOOP AT it_me21-x_data INTO x_idata.
CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
v_indx = v_indx + 1.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
ENDLOOP.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '=BU'.
PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
End of selection event *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
WRITE :/10 text-001. "Sucess records
WRITE :/10 SY-ULINE(20).
SKIP.
IF it_sucess IS INITIAL.
WRITE :/ text-002.
ELSE.
WRITE :/ text-008, "Total number of Succesful records
35 v_ns.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_sucess.
WRITE:/4 it_sucess-lifnr,
17 it_sucess-tabix CENTERED,
30 it_sucess-sucess_rec.
ENDLOOP.
SKIP.
*-----To display the erroneous records
WRITE:/10 text-006. "Error Records
WRITE:/10 SY-ULINE(17).
SKIP.
IF it_error IS INITIAL.
WRITE:/ text-007. "No error records
ELSE.
WRITE:/ text-009, "Total number of erroneous records
35 v_ne.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_error.
WRITE:/4 it_error-lifnr,
17 it_error-tabix CENTERED,
30 it_error-error_rec.
ENDLOOP.
REFRESH it_sucess.
REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include ZMM_INCL_PURCHASEORDERKB01
DATA: it_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
sucess_rec(125),
END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
error_rec(125),
END OF it_error.
Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu. "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12). "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12). "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
GROUP = SPACE. "OR USER = SPACE.
MESSAGE E613(MS).
ENDIF.
create batchinput session *
FORM OPEN_GROUP.
IF SESSION = 'X'.
SKIP.
WRITE: /(20) 'Create group'(I01), GROUP.
SKIP.
*----open batchinput group
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = GROUP
USER = sy-uname.
WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
(12) 'returncode:'(I05),
SY-SUBRC.
ENDIF.
ENDFORM. "OPEN_GROUP
end batchinput session *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
(12) 'returncode:'(I05),
SY-SUBRC.
ELSE.
IF E_GROUP_OPENED = 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /.
WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
ENDIF.
ENDIF.
ENDFORM. "CLOSE_GROUP
Start new transaction according to parameters *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
WRITE: / 'BDC_INSERT'(I03),
TCODE,
'returncode:'(I05),
SY-SUBRC,
'RECORD:',
SY-INDEX.
ELSE.
REFRESH it_MESSTAB.
CALL TRANSACTION TCODE USING it_BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO it_MESSTAB.
L_SUBRC = SY-SUBRC.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
ENDIF.
Message handling for Call Transaction *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
IF E_GROUP_OPENED = ' '.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = E_GROUP
USER = sy-uname
KEEP = E_KEEP.
E_GROUP_OPENED = 'X'.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM. "BDC_TRANSACTION
Form subr_bdc_table *
text
-->P_0220 text *
-->P_0221 text *
-->P_0222 text *
FORM subr_bdc_table USING VALUE(P_0220) TYPE ANY
VALUE(P_0221) TYPE ANY
VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
CLEAR it_bdcdata.
it_bdcdata-fnam = P_0221.
it_bdcdata-fval = P_0222.
APPEND it_bdcdata.
ELSE.
it_bdcdata-dynbegin = P_0220.
it_bdcdata-program = P_0221.
it_bdcdata-dynpro = P_0222.
APPEND it_bdcdata.
ENDIF.
ENDFORM. " subr_bdc_table
Form subr_mess_hand *
text *
-->P_G_MESS text *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = it_messtab-msgid
LANG = it_messtab-msgspra
NO = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
MSG = P_G_MESS
EXCEPTIONS
OTHERS = 0.
CASE it_messtab-msgtyp.
when 'E'.
it_error-error_rec = P_G_MESS.
it_error-lifnr = it_me21-lifnr.
it_error-tabix = v_count.
APPEND IT_ERROR.
when 'S'.
it_sucess-sucess_rec = P_G_MESS.
it_sucess-lifnr = it_me21-lifnr.
it_sucess-tabix = v_count.
APPEND IT_SUCESS.
endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM. " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b> -
Hi Experts,
I have a Workflow which triggers on record update.
After the start step i have 3 assignment Fields and then Some validations etc.
I can see that this workflow is stopped at First assignment step Some times with Error.
And when i Open the workflow and close it again, then the next time there is a Update to a Record this workflow works fine...
This is strange..
the Workflow entry which is in ERROR will remain the same, Even if i press 'Perform' ..
DId anyone face this issue earlier!!!
It works fine for 2 days and suddenly i can see in Workflow table there is a entry with Error at First Assignment step of Workflow.
when i Open work flow, Edit some description and save it back and the rest of the workflows from then are executing without error.
But the one with Error in WF table still remains the same even after selecting 'Perform' on it.
KR
JohnHi John,
Please find details of a SAP Note 1553992 on this issue:
Symptom
- Data Manager crashes when trying to click on workflow job line (only in MDM 5.5).
- Workflow jobs are in error state due to executing next step such as syndication step after a job was in error state due to bad assignment.
Other terms
- Workflow crash Data Manager, O28627 2011
Reason and Prerequisites
o Description of the root cause of the bug and ways to reproduce and/or diagnose the issue:
Reproducing the scenario can be done by creating a workflow with the following steps:
1. Start
2. Bad Assignment (e.g. assignment created unique constraint violation)
3. Syndication
4. Stop
After executing the workflow job, the job is shown in error state in MDM Data Manager.
Clicking on next -> Syndication step changes the workflow job to a job that only the owner can see. The job is shown in MDM Data Manager in error state, its step description is empty and no user specified in user column.
Clicking on the workflow job will lead to a crash in Data Manager.
MDM Data Manager crashes since the workflow job is is in error state but none of his steps is in error state.
In this mode(unlisted), MDS prepares the workflow list to be send to Data Manager with user name with value NULL.
Data Manager crashes when it tries to access the user name of the workflow.
The issue was introduce with MDM 5.5.
Issue is not relating to a specific platform/DBMS.
Solution
o The workaround is:
Delete workflow job in error state using Java API.
o The description of the fix is:
The fix handles two scenarios:
1. Existing workflow jobs in error state that caused a crash
in MDM Data Manager. A fix was made in MDS to add the owner as user
name to the workflow jobs in such scenario.
As a result users are able to delete the workflow job or show its
history.
2. New workflow job will not stay in Error state and the next step will
be correctly performed.
o The issue was fixed in the following code lines and versions:
- MDM 5.5 SP06 Patch05 Hotfix 45 (Build 5.5.65.125) -
change list #94328
- MDM 7.1 SP07 (Build 7.1.07.113) - change list #94340
- MDM 7.11 (Build 7.11.0.146) - change list #94339
o What areas of the code were fixed?
Workflow Run Time
o What areas of the code were affected by the fix?
Workflow Run Time
o The following component(s) need to be replaced to correct the specific flaw addressed by this note:
In 5.5 Version:
Master Data Server
MDM SERVER 5.5
In 7.1 Version:
Master Data Server
o Additional component(s), if any, that were impacted and should be regression-tested by the code change:
In 5.5 Version:
GUI Clients
JAVA API
In 7.1 Version:
Data Management Clients
JAVA API
Hope this helps.
Thanks,
Ravi -
Hi,
How can i delete the work items from my work flow? plz suggest....
Thanks in advance...
Ramesh...Check these links..
Re: DELETE workitems!
http://help.sap.com/saphelp_nw04s/helpdata/en/f4/843239cb0211d1950d0000e82dec10/content.htm -
Work flow in release strategy..?
Hi experts
Can anybody expalin me what is Work flow in release strategy .
Exaplain me with some examples for Work flow in release strategy.
Thanks
SAP-mmYou have to carry on the following activites:
1) Define Organisation Struture
2) Application specific customizing
A) Define Characteristic values
B) Define release codes and make them Workflow relevant
C) Define release strategy
Based on the characteristic values the Purchase Order will be applied to a particular release
strategy and will fall under specific catagory to pass through different level of approvals
D) Assign release codes to corresponding Orgnisational Objects with ID
3) Task specific customizing
A) Activate the event linkage for the standard workflow WS20000075
B) Do the agent assignment for the TS20000166
C) Make other two tasks as General Tasks (TS20000168,TS20000167).
4) Delete the row for event "Releasestepcreated" from SWEC (OSS Notes: 797775)
Hope this will help you -
How to reflect new changes in older instance of work flow?
Hi All,
I am working on a custom workflow.
This workflow is triggered by web dynpro component.
Earlier my custom infotype was getting updated from web dynpro, and work flow is used to maintain process flow.
But currently we started facing some authorization issue while updating infotypes for approvers.
So now i introduced an activity in work flow to update this infotype from work flow using WF_Batch
(calling method of a class to update the infotype), and commented the code to update infotype from web dynpro.
Now the problem is, i have few requests raised using older version of work flow,
in which the activity to update infotype was not there.
New requests are working fine, infotype is getting updated using work flow.
But in older requests when i am viewing from SWIA that new activity to update infotype is not visible.
How can i implement the changes to older instances of work flow?
Because for older requests in web dynpro also there is no code to update infotype as well as in older work flow instance
my activity to update infotype is not visible.
Waiting for help.....
Regards,
AmarHi Amar,
The changes will be reflected for new instances that are created after the transport of the new workflow definition.
The instances of old definition will continue as it is.
However a workaround could be that you can end the old definition instances by logically deleting them and start new workflow by T code SWUS or generating event by SWUE and go through the whole process again.
Re- triggering of the workflow seems to be only solution here .
Hope this helps.
Regards,
Sangvir Singh -
Work flow mails are not coming to inbox but coming to out box in quality
Hello,
We are working on the implementation of Work flow for Purchase orders.
Work flow customization is completed and even work flow is triggering when ever I create Purchase Order.
Even Agent assignment also completed for work flow tasks via T code PTFC_CHG.
This work flow is working fine in development.
When I moved this workflow to quality I got a problem.
Problem here is Work flow mails are not processing out of SAP Outbox to approvers inbox even also after executing the program RSWUWFML2.
When I triggered the PO in development the work item is moved to SAP out box as well as inbox. In quality It is not coming to SAP inbox.
If I check in SOST,I will not see any of the entries related to work flow mails.
Only above I can see in my SAP Outbox.
So how can I Process these messages to approvers SAP Inbox.
Any body please help me where the problem is
With regards,
SudhakarHi SP,
I may be wrong, but on reading ur thread, I feel u r mis interpreting SAP Outbox with Outlook.
Is it so, because u have mentioned about RSWUWFML2 and SOST, which comes into picture only if u r using an external mail like Outlook.
If its Outlook, then there is no doubt that ur work item would get deleted from SAP Inbox and would be present only in Outlook.
If its SAP Outbox, then u r not supposed to get ur work item in ur Outbox unless it is processed or executed thru ur SAP Inbox.
Hope it helps.
Aditya
Edited by: Aditya Varrier on May 23, 2008 1:52 PM -
Work flow mails not processing from SAP Outbox to Approvers
Hello,
We are working on the implementation of Work flow for Purchase orders.
Work flow customization is completed and even work flow is triggering when ever I create Purchase Order.
Even Agent assignment also completed for work flow tasks via T code PTFC_CHG.
Problem here is Work flow mails are not processing out of SAP Outbox to approvers even also after executing the program RSWUWFML2.
If I check in SOST,I will not see any of the entries related to work flow mails.
For eg:If I creates a Purchase order it will trigger Release Strategy and I can see the message to Approvers,like "Please Approver PO..."
Only above I can see in my SAP Outbox.
So how can I Process these messages to approvers SAP Inbox.
Any Pre Setting I have to do?
With regards,
SPKHi SP,
I may be wrong, but on reading ur thread, I feel u r mis interpreting SAP Outbox with Outlook.
Is it so, because u have mentioned about RSWUWFML2 and SOST, which comes into picture only if u r using an external mail like Outlook.
If its Outlook, then there is no doubt that ur work item would get deleted from SAP Inbox and would be present only in Outlook.
If its SAP Outbox, then u r not supposed to get ur work item in ur Outbox unless it is processed or executed thru ur SAP Inbox.
Hope it helps.
Aditya
Edited by: Aditya Varrier on May 23, 2008 1:52 PM -
Release Strategy or work flow in BI Content
Hi !
Do we have Release Strategy or work flow in BI Content of BW Release 3.5 ?
I have to display a history of purchasing requisitions and orders that was uploaded from SRM.
Thanks !!!
ZeldaYou have to carry on the following activites:
1) Define Organisation Struture
2) Application specific customizing
A) Define Characteristic values
B) Define release codes and make them Workflow relevant
C) Define release strategy
Based on the characteristic values the Purchase Order will be applied to a particular release
strategy and will fall under specific catagory to pass through different level of approvals
D) Assign release codes to corresponding Orgnisational Objects with ID
3) Task specific customizing
A) Activate the event linkage for the standard workflow WS20000075
B) Do the agent assignment for the TS20000166
C) Make other two tasks as General Tasks (TS20000168,TS20000167).
4) Delete the row for event "Releasestepcreated" from SWEC (OSS Notes: 797775)
Hope this will help you -
Work flow for Purchase requisition
HI EXPERTS,
I am new for MM workflow, my client asked me to overall purchase requisition approval through work flow,i did configuration like
BUS 2105 -OBJ TYPE
WS20000077-RECIVER TYPE
RELEASESTEPCREATED-EVENT TYPE
AND ASSIGN AGENT ALSO.....
its working fine,and i get messages but my problem is i didnt release pr from inbox,
again i used me 54n for release .is there any chance to release pr from in box,,,
and also how to change time in time stamp column,i am getting wrong time please help me...
Thanks in advance
Thanks,
sivaYou need to verify that there is a teminating event. A terminating event works so that if you perform the action outside of the workflow inbox, the linked work item is "logically deleted" from the user inbox.
-
Work Flow + Two External Drives + Aperture -vs- iView MediaPro
Greetings!
Hoped for end result: 30 GB of photos available at home and office. Freed up hard drive space on MacBook Pro. An organized system for locating photos.
I am seeking to break my old photo workflow paradigm.
Recently, I have moved 30 GB of images from iPhoto to an external drive (actually to two different external drives). I do not plan to use iPhoto in the future (only minimal use). Insights on the following would be appreciated:
(1) I have two - FreeAgent Pro - hard drives - 750 GB. One at home and the other in my office. The data on both drives (i.e. 30 GB of image) is identical. A GENEROUS amount of space is still available on these external drives. Just completed this process / setting up both identical drives last night ... identical images at the office and home.
(2) My hoped for outcome is to be able to access my photos at work / home and have some program (Aperture -vs- iView MediaPro) to manage the work flow. Thus, keeping my MacBook Pro hard drive freed up.
(3) The majority of Apple Discussion users seem dedicated to using Aperture. What do you see as the benefits of Aperture -vs- iView MediaPro? Yes, I know the latter in now owned my MS.
(4) Still not totally sure, the best way, to workflow my photos with with the dual external drives and Aperture. Your guidance, please.
(5) Here is a possible scenario (example):
STEP ONE - (at home) download a new batch of photos (Olympus E-1, high res jpeg's, no raw) onto my macBook Pro (MBP) into folder "A".
STEP TWO - process (ingest) ... move the new photos into Aperture.
STEP THREE - load them into my home external drive.
STEP FOUR - The next time I am in the office load the original jpegs (folder "A") onto my office external drive.
STEP FIVE - Delete the originals photos from folder "A", keeping my MBP hard drive space freed up.
STEP SIX - unsure ... somehow connect the new photos on the office external drive with Aperture (or iView MediaPro).
Where have I missed the boat?! Scrambled things up?! Does this make sense?
For what I am seeking to accomplish, will iView MediaPro accomplish what Aperture could perform?
Kind regards,
Bill Siegrist
[email protected]Bill-
If all you are doing is managing 30 GB of pre-existing JPEGs in 2007 iVMP is probably superior. However I would venture a guess that you also intend to capture new images with your DSLR. For that you very much want Aperture. And IMO moving to 2008 and beyond Aperture's potential far exceeds iVMP's.
And you did note that iVMP is now owned by MS; not good.
Solving an entire workflow is not something easily done in a few forum paragraphs. I strongly recommend that every DSLR photog with adequate computer hardware first spend $33 and work through the tutorial CD Apple Pro Training Series: Aperture 1.5 (Apple Pro Training) by Orlando Luna and Ben Long (Paperback - Oct 18, 2006).
Have the CD and a MacIntel with 2 GB or preferably more of RAM prior to ordering the Aperture trial so you don't waste time of the 30 day trial. Note that the value is in the tutorial, not in using the book as a manual. Due to the limited hard drive capacity, anyone with a laptop should focus on developing a "Reference Masters" workflow.
You say JPEGs, no RAW. I would in the strongest possible terms recommend that you consider switching to a RAW workflow. In addition to allowing extraordinary post process editing, RAW image files contain much more image data. I believe that your DSLR will capture up to a dozen RAW pix before the buffer fills. Shooting JPEGs is a serious under utilization of a capable DSLR.
-Allen Wicks -
How to edit work flow in webcenter ?
Can any one suggest me to edit of create work flow which is in UCM?
Hi,
I am after processing the Idoc to Work item...
Double click on the work item which in turn takes to the "Display Record"...in the screen itself..Menu bar
we have EDIT --> Foreground Processing ---> Visible
Foreground from Error ---> Visible
Background Processing ---> Visible
Set delete Indicator ---> Visible
End process ---> Disable
Continue Despite syntax error ---> Disable(Want this to show in Visible )
Please help me on this case.
Thanks in advance
Chakri
Maybe you are looking for
-
Hi all , ihave a problem with i-mesaages. I can recieve i message and can reply on the same i messages . But if i want to intiate i messages with the same guy who i've recieved from i can't. Kindly advise
-
All car chargers have recently stopped working, chargers are ok and various leads tried so can oly assume its something to do with the phone, any ideas please?
-
TS3274 iPad Purchased list not visible, but is there.
I have an iPhone and therefore have a purchased list, however on my new iPad the purchased list is there but visually it is not showing only when you click on the screen blindly you can see the app.
-
Why was camera roll removed on iOS 8?
why was camera roll and photo stream taken off the phone On iOS 8?
-
I updated adobe flash and now all it does is crash can anyone tell me how to fix this?
I update adobe flash and now when i play games the adobe flash crashes does anyone know how to fix this problem