Work Folders for Windows 7

Hi,
Would anyone know when Work Folders client support will be available for Windows 7? It was meant to be made available shortly after general availability of Server 2012 R2 (http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=windowsserverpreview)
Thanks,
HA.

Hi,
This should be a client side question. I just discussed with Windows client support about this question, it seems that currently there is no clearly date when Work Folders will be added to Windows 7. Personally I assume it will be included in a service pack
like Windows 8.1.
If you have any feedback on our support, please send to [email protected]

Similar Messages

HT5628 Does it work with a macbook (aluminium) 2008 late, even if it isn't said in the desription? Windows 7 also did run, but wasn't in the list of working models for windows 7...

Does it work with a macbook (aluminium) 2008 late, even if it isn't said in the desription? Windows 7 also did run, but wasn't in the list of working models for windows 7 either...

JK90, I have boot camp on my Mountain Lion late-2008 unibody running 64 bit Windows 8, with a brand new ssd and 8gigs of ram. Although my scenario is officially unsupported, it works great. My 4+ yr old mac is the best PC I've ever owned :-)
There are a number of complications during and after installation, and you need to do a lot of research to make sure you get it right. I worked long and hard to get everything running just right.
Even after Windows was installed I had even more trouble with my drivers, and getting especially getting the trackpad to work properly, so I needed to use a regular mouse until I could get the trackpad on.
Also check out trackpad++, I've been using it for years now, it upgrades the trackpad drivers from apple and makes using Windows much nicer.

Work Folders on Windows 7 - Error Sync Stopped Can't Encrypt Files

Hello All-
We are getting ready to roll out Work Folders. It is working all fine on Windows 8.1 devices and am not trying to get it to work on Windows 7 SP1 devices. The Work Folders client for Win7 installs fine and I can configure it, however,
immediately after configuring work folders it displays an error stating that "Sync Stopped. Can't Encrypt Files." There is really no other information that I can find on this error.
Any help would be appreciated!!
Thanks

Digging around a bit more, I found some error msgs in Work Folders Event log:
Event ID 2100
Sync failed. Work Folders path: C:\Users\testuser\Work Folders; Error: (0x80c80314) The Work Folders path has to be encrypted. You might have an application holding the Work Folders folder open or the folder might be compressed. Close Windows Explorer and
any open files or apps, and check the folder Advanced properties to ensure that the folder is not compressed.
and
Event ID 9002
Work Folders detected a sync error. Check partnership status, network connectivity, and disk space.
Again, these errors only occur on Windows 7 SP1 Professional | Enterprise devices. Windows 8.1 devices function as desired.

Which version of Airport utility works best for Windows 7?

We've downloaded version 6, but an error window keeps coming up. Do I need an earlier version? How do I get rid of this version?
Thanks.

If you are running Windows 7, you need AirPort Utility 5.6.1 for Windows - Support - Apple
Delete the 6.x version that you downloaded, as it will not run on a PC.

Burn folders for windows pc

to burn folders of pictures that have to be viewed on a windows pc i have to use the photo section of finder,create the folder,and title each picture seperately.i tried the batch change in iphoto and some work and some dont.there has to be a easier way to burn a folder of pictures,with each picture labeled say easter 06 than what im doing.i still dont like that date and numbering system that iphoto uses.i want to know a easier way or better way and im searched out so please help a old man out.

Hi pong,
This is how I do it. I don't have Photoshop Bridge so I can't test with that.
I open a folder of images in the Finder in column view or list view.
I drag to select all the images, or just select all from the menu bar.
I then double click on the selected images to open them all in Preview.
As you will see, one image is displayed and the others will be in the slide out drawer. I highlight each image in the drawer to bring it in the main window.
If I want to burn that image, I drag the tiny icon for the image from the title bar of the window into the burn folder that I created on my desktop. You should notice that the image under the cursor will get the little alias sign on it as you drag it into the burn folder.
When you are done evaluating that folder. Go on to the next folder using the same procedure.
Hope this helps!
Lori

Push Mail Not Working Properly for Windows Live Mail when Online At Windows Live Messenger

Hello,
This is quite an old subject, but it seems to be a recurring problem across versions of Windows Live Messenger handheld client software and Blackberry Internet Service server software. For some time, I used to have no issues with Live Messenger and Push Mail from Hotmail. Now, once again, I am having a huge delay, of several hours, when logged on as “Online” to Windows Live Messenger.
What makes me believe that it is not a Windows Live limitation, by design, due to protocols and notification mechanisms in use, is the fact that I can receive both push mail and instant message notifications, immediately, as long as I am logged on to Windows Live Messenger as “Busy” or “Away”. If the protocols in place allowed notifications to only a single service at a time, I believe it should not work regardless of the status on Windows Live Messenger.
I have been using Hotmail for quite a while and most of my friends use Windows Live Messenger, so I would like to keep both working in my BlackBerry. I understand BlackBerry has a commitment to offering broad compatibility, great stability, and better integration than other solutions on the market that appeals to fancy user interfaces and forget about objectivity. Having a mobile platform that can keep both the corporate and consumer world happy is definitely a great advantage. There are several loyal users that would like to keep sharing the proficiency on a common user interface for business and personal use.
I do not often post messages to online forums, but this is an issue that has been annoying me for quite some time and I am really looking forward to a solution. Is anyone experiencing the same behavior with Windows Live Messenger lately? Is RIM looking for a solution?
Thanks,

Ahhh...given that description, it may be WAD (Working As Designed):
KB15747Email message delivery is delayed because of an integrated Windows Live Hotmail account on the BlackBerry smartphone
As such, there would be nothing to report...
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Saving layer visibility as views does not work - CS5 for Windows

I've read about it multiple places, even watched a video where it supposedly works. But when I toggle layer visibility and save as a new view, it doesn't seem to work.
Here's the video: http://layersmagazine.com/illustrator-different-views.html
Any ideas?

Layer Visibility Variables – A short introduction
1. Open a new document and name Layer 1 "Cyan"
2. Add three main layers and name them "Magenta", "Yellow" and "Black"
3. On each layer draw a shape and colour it according to the Layer's name.
4. Save the file as "My_first_Variables.ai"
5. Target Layer "Cyan" (click the circle at the right hand of the Layer's name)
6. At the bottom of the Variables Palette click the Make Visibility Dynamic button
Now you've created your first Layers Visibility Variable. Continue with
7. Target Layer "Magenta" and click the Make Visibility Dynamic button in the Variables Palette
8. Target Layer "Yellow" and click the Make Visibility Dynamic button in the Variables Palette
9. Target Layer "Black" and click the Make Visibility Dynamic button in the Variables Palette
Done. You have created four Layers Visibility Variables. The next step is to define the Data Sets:
1. Layers Palette: Show Layer "Cyan" and hide all other layers
2. Variables Palette: Click the Capture Data Set button (the camera icon)
3. Layers Palette: Show Layer "Magenta" and hide all other layers. Now in the Variables Palette the first Data Set becomes italic indicating that you can create an new Data Set. So click the Capture Data Set button to define Data Set 2.
4. Layers Palette: Show Layer "Yellow" and hide all other layers
5. Variables Palette: Click the Capture Data Set button to create Data Set 3
6. Show Layer "Black" and hide all other layers. Click the Capture Data Set button to create Data Set 4
7. Show all layers and click the Capture Data Set button to create Data Set 5
Done. You have created five Data Sets. Just play around by toggling them in the Variables Palette (Next/Previous Data Set button or via Popup menu/Flyout menu) and see one feature among other things: The Variables Palette as a remote control of the Layers Palette. If you like, rename the Data Sets according to the Layers names for instance.
Now it's time to create some simple Save/Export actions in order to Batch save/export Layers as single files. For example:
Export as PSD
1. Open any file
2. Actions Palette: Create new action and name it "Export Layers as PSD"
3. File > Export as PSD. Choose any destination folder, the desired options in the Photoshop Options dialog and hit Enter
4. Click the Stop Recording button in the Actions Palette and disable the Show dialog icon (on the left hand of the action's name)
Save as PDF
1. Open any file
2. Actions Palette: Create new action and name it "Save Layers as PDF"
3. File > Save as PDF. Choose any destination folder, the desired options in the PDF Options dialog and hit Enter
4. Click the Stop Recording button in the Actions Palette and disable the Show dialog icon (on the left hand of the action's name)
Now start the Batch command:
1. Switch to the original "My_first_Variables.ai"
2. Actions Palette Flyout menu: Batch
3. In the Play Area choose the Export Layers as PSD action
4. Choose Data Sets as the source
5. In the Destination Area enable the Override Action Export Commands option and choose any destination folder
6. Choose an option for the File name and hit Enter to start the Batch
Done. All four Layers plus the fifth Data Set have been exported as single Photoshop files. Repeat the Batch with the Save Layers as PDF action (don't forget to enable the Override Action Save Commands) and, of course, create your own actions, experiment with other file formats, figure out some harmless bugs especially in conjunction with the PDF compatible AI format when placing in InDesign.

Work Folders - Specific Group Policy's that are needed to satisfy domain client security level

Hi All,
We have Work Folders successfully set up on our domain. A non domain joined client can connect and gain access to their work folder share without issue.
I am now in the process of setting up domain connected laptops that will be used by staff. These laptop will have restrictions on them and the users that logon will not have admin privileges.
The work folder server has the device policies of:
Encrypt Work Folders
Automatically lock screen, and require a password
We are using Windows 8.1 enterprise clients, with the latest patches. If I turn off the "Automatically lock screen...." policy, a domain user can successfully sync their work. If I turn it back on they get the below error:
"Make sure that your account is an administrator on the PC and that all administrator accounts on this PC have a password."
I have set the group polices that I believe might effect this message, but have yet to get a successful sync. Could someone give me the exact group policies I would need to set for client to meet the security requirements.
Minimum password length of 6
Autolock screen set to be 15 minutes or less
Maximum password retry of 10 or less

Hi,
Work Folders provides the two device policies that administrators can control. The policies are enforced on the Windows 8.1 clients before data sync is allowed.
The policy settings are not configurable, and they are enforced on the devices running with Windows 8.1 through the EAS Engine.
Please refer to the article below to troubleshoot the issue:
Work Folders for Windows 7
http://blogs.technet.com/b/filecab/archive/2014/04/24/work-folders-for-windows-7.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Application Restart and Recovery APIs doesn't work for windows services

I am using the Application Restart and Recovery mechanism (provided in Windows API Code Pack for Microsoft.NET Framework) to collect some information (i.e. stack information when there's an unhandledexception) before my windows service crash down.
It works well for windows form applications, but the callback method wouldn't be called if the host is a windows service.
I have checked the article: https://msdn.microsoft.com/zh-cn/subscriptions/downloads/cc303708
But it doesn't specify clearly whether it works for a windows service. It seems that the recovery will only be activated when the user interacts with the error dialog of Windows Error Reporting (clicking "close" on the dialog, for example).
So I am wondering is my guess right that the Application Restart and Recovery mechanism doesn't work for windows services. Or is there a better way to meet my requirement?

I would suggest trying ARR if that's what you want to use. The restart portion won't work, but it doesn't need to as if you fail out of your service, the Windows service controller will handle recovery (up to and including restarting your service).
You configure those recovery actions either through code or one of the built in administrative tools for services such as services.msc.
DebugDiag/ADplus and similar tools ultimately do use built-in APIs; you don't need to add anything external to collect debugging information. You do however have to write a good deal of code to do somethings. It's pretty simple to use the unmanaged
function that I pointed out before and
MiniDumpWriteDump to write a minidump when you hit an unexpected error(the dbghelp.dll that comes installed with Windows has it so you don't need anything additional installed). You can even write a basic debugger that literally debugs a process using
only kernel32 functions (see
https://msdn.microsoft.com/en-us/library/windows/desktop/ms679301(v=vs.85).aspx if you're interested).
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

DirectShow for Windows 8.1 Pro on Surface Pro 3

Good Morning,
I have a touch screen application which uses DirectShow for capturing a photo. This has been working fine for Windows 7, Windows 8 and Windows 8.1 on a desktop.
However we have recently started to use the application on a Surface Pro 3 and found that the camera functionality is not the same. Sometimes the photo will capture, upon re-capturing the preview is scaled a 1/4 of the original size, the camera will lock
out with a System.Excepton of "No combination of intermediate filters could be found to make the connection."
The application is built in C# Winforms. Is there a solution to capturing photo's which will work across Windows 8.1 Desktop and metro?
Thanks in advance.

Hi there @Andrea-dv7
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are having some trouble with your system startup, with it sounds like an intermittent restart issue. I am happy to help with this, but I do need some more details as to what is happening.
Does the system restart like this regularly?
When it happens, are there any errors on the display, or a Blue Screen, or flashing LED patterns?
Have you noticed if the computer is excessively warm or hot when the restarts happen?
If there are any displayed error messages, please post any details you can.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Portal drive software for Windows 7 (64-bit)

Hi...Experts
We could not find the portal drive software for Windows 7 (64-bit) OS on service market place. The one which is available on market place is working fine for Windows 7 (32-bit ) but it does not work for 64-bit.
Can any one help us to get the 64-Bit Portal Drive
Rgds
PR

1- Set BasicAuthLevel's value to "2" by expand HKEY_LOCAL_MACHINE >> SYSTEM>>CurrentControlSet>>Services>>webClient>>Parameters
2- Restart your computer.
3- Right click "Computer" and click "Map network drive..."
To Letter Field: Set a free drive letter.
To Folder Field: Assume that your webDav address is http://abc.com:50000/irj/go/km/docs/ change it to
abc.com:50000irjgokmdocs
4- Enter your ID an Password
thats all...
Note: The mapping is as follows:
0 - Basic authentication disabled
1 - Basic authentication enabled for SSL shares only
2 or greater - Basic authentication enabled for SSL shares and for non-SSL shares

Battery gauge error running Power Manager for Windows XP version 5.20

Last week on my R61 (8932-CTO), Update Retriever and System Update requested that I download and install ThinkPad Power Manager for Windows XP version 5.20. After rebooting, I immediately received an error box with the following message:
An exception occurred while trying to run"C:\Progra~1\ThinkPad\UTILIT~1\PWRMGRTR.DLL,PwrMgrBkGndMonitor"
As a result of this error, the battery gauge no longer displays correctly. The space where it used to be is blank, but clicking the empty space still gives you the option of starting Power Manager.
What is puzzling about this is that version 5.20 is not available in either in the Driver Matrix, nor on the Downloads and Drivers web page. The version of the software that is presented there is version 5.13.
The driver for ThinkPad Power Manager for Windows XP - version 5.20 can be downloaded from:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/ghu704ww.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/ghu704ww.txt
Another interesting point, is that this version of the driver has, as yet, not been presented to me on my R500 (2714CTO), although both machine types are listed as supported models.
Why are Update Retriever and System Update downloading software that apparently has not been officially released yet? Why is this only happening on my R61 and not on my R500?
And last of all, why has his software been released when it seems to have an obvious problem?
Any explanations would be appreciated.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

I just wanted to confirm that the last working version for Windows XP is version 5.05 revision 04.
It can be downloaded from Lenovo:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g6u702ww.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g6u702ww.txt
Cheers!

Get host name and ip addrees of the client machine for window VISTA

Hello Friends !!
I have write the following code to get the ip adress and host name of the client machine ..
it works fine for windows xp and 2000 but in vista it gives this type of out put.
host name = 0:0:0:0:0:0:0:1
ip addresss = 0:0:0:0:0:0:0:1
what i have to make changes in my code to get the proper ip address and hostname for vista...
My code is listed below....
code ::
InetAddress remoteAddress = null;
// Setting Host Name...
request.setAttribute("reportHostIP", request.getRemoteAddr());
// Setting Host IP Address...
try
     remoteAddress = InetAddress.getByName(request.getRemoteAddr());
     //This will give you the full qualified domain name of the client
request.setAttribute("reportHostName", remoteAddress.getCanonicalHostName());
catch(Exception e)
     logger.error(e.getMessage(), e);
}

BIJ001 wrote:
Is it not IPv6 by any chance?It is. And if I remember correctly, then "0:0:0:0:0:0:0:1" (or "::1" for short) is the IPv6-equivalent to "127.0.0.1", i.e. it's the loopback device.

Lenovo Ideapad S400 AMD ATI 7450m Driver for Windows 8.1

Someone know where i can download a working driver for windows 8.1 ?
The driver published for windows 8.1 in 16 october fails when i launch any game the driver crash
I reinstalled the so too and tried with amd website drivers but my card is no supported

Dear angelus
Welcome to Lenovo forums
what was the operating system that came preloaded on your machine
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Setting a default folder view for all folders in Windows 7

How do you set up a default folder view of "List" for ALL the folders in Windows 7 including the optical drive?
Artoo

I just installed windows 7. Are you seriously telling me that i now have all folders with mp3s in them AUTOMAGICALLY (THANKS FOR THE HANDY HELPING HAND THERE MICROSOFT!!!) set to some designers whim of what an mp3 folder "SHOULD" look like?
Well i was going to write a big rant, and indeed did, but then i was doing some more research and it seems like i just made everyones day and solved the problem (partially). Or well THIS guy did:
http://www.howtogeek.com/howto/16694/customize-the-five-windows-folder-templates/
After you’ve clicked OK, visit some of the other folders in your file system. You should see that most have taken on these new settings.
What we’ve just done, in effect, is we have customized the General Items template. This is one of five templates that Windows Explorer uses to display folder contents. The five templates are called (in Windows 7):
General Items
Documents
Pictures
Music
Videos
When a folder is opened, Windows Explorer examines the contents to see if it can automatically determine which folder template to use to display the folder contents. If it is not obvious that the folder contents falls into any of the last four templates,
then Windows Explorer chooses the General Items template. That’s why most of the folders in your file system are shown using the General Items
template.
Changing the Other Four Templates
If you want to adjust the other four templates, the process is very similar to what we’ve just done. If you wanted to change the “Music” template, for example, the steps would be as follows:
Select a folder that contains music items
Apply the existing Music template to the folder (even if it doesn’t look like you want it to)
Customize the folder to your personal preferences
Apply the new template to all “Music” folders
A fifth step would be: When you open a folder that contains music items but is not automatically displayed using the Music template, you manually select the Music template for that folder.
Anyways, sorry that explanation doesnt do it justice. I have spent waaay too much time trying to figure this out already. Also that link doesnt say how to 1) copy templates (are they file or registry based?, didnt do research) 2) if you can distable templates
or the automatic re-templating of folders.
THAT is what i want to know! as it is much more maintance then its actually worth...
but once i had set 5 default types to, the exact same thing... it now doesnt matter if it automagically switches it. SUCK IT MS AUTOTUNE!!!
Its bloody hard to frame this question too. What can you say about this? "folder changes to mp3" "customize folder types windows 7" "windows 7 folder changes to mp3" "dont automatically change folders to mp3" "how
to change mp3 details column for good" "automatically change column order win 7 mp3"
The search that actually solved it:
"do not apply default template to mp3 windows 7"
good luck, this worked for me!
EDIT: also i just noticed that neonr already answered this above. i just didnt read it carefully enough. anyways i guess i will leave this and mark his as answer.

Work Folders for Windows 7

Similar Messages

Maybe you are looking for