Work in process discrete jobs

I can't understand why is it possible in work in process(discrete jobs) to Move assemblies even if you haven't issued components to that job,it means that you can complete assemblies without issuing material why is that the case please clarify.

Sometimes you have shortages of a component and the component is such that it can be added to the assembly a little later.
The above functionality allows you to move past an operation so you can record that it was attempted/done partially.
But by keeping the material requirement open, you can keep track of what needs to be issued to the job once the onhand is available.
If your client does not want this to occur, you can either make the component operation pull or create a personalization /customization on the move screen that disallows the move if any push component is not issued.
A lot of companies manage this by creating reports that show unissued material. You can do that too.
Sandeep Gandhi

Similar Messages

ESYU: Canceled 상태의 WIP Work order나 Discrete job을 purge 할 수 있는 방법

Purpose
Oracle Work in Process - Version: 11.5.2 to 11.5.10
WIP 사용자 중 Canceled status의 Discrete Jobs이나 WIP Work Orders를 purge
하길 원하는 user가 있다.
하지만 standard form은 closed discrete jobs만을 purge 할 수 있다.
WIP user manual에 따르면 현재 closed 된 accounting period 안에서 closed 된
discrete jobs에 대한 정보만을 purge 할 수 있다고 되어 있다.
다음은 이에 대한 work around 이다.
Solution
Work Around:
1. WIP: Discrete> Close Discrete Jobs> Close Discrete Jobs(Form)으로 이동한다.
2. Find Discrete Jobs parameter에 아래와 같이 입력한다.
From Job = Close를 원하는 Job
To Job = Close를 원하는 Job
Status = Canceled
3. Tools menu에서 Close 1을 선택한다.
Close 1을 선택하면 canceled Discrete Job이 closed 가 된다.
이 때 job number를 기억하고 note 해 둔다.
4. GL과 Inventory Accounting periods가 close가 될 때, canceled discrete jobs
(현재는 closed 상태)를 Purge Job form을 이용하여 purge 할 수 있다.
WIP: Discrete> Purge Discrete Jobs> Purge Discrete Josb from or SRS
Reference
Note 429489.1

Sales Process of JOB WORK

HI
We have new scenerio for JOB WORK PROCESS
Customer will provide us the Raw Material and on proccessing it we will produce two diffrent finish goods
which will be billed to that customer through JOB ORDER
Can anyone tell us how to configure process into SAP .
Regards
PR

hi
Create Sales Order. And Purchase requisitionVA01,Check stock / requirements situation for finished product. MD04
Check list of Purchase requisition     ME5A
Create Subcontracting order with reference to the Purchase Requisition     ME21N
MD04
Post Goods Isue w.r.t to Subcontracting Order     MB1B
Create Subcontracting Challan 4.5/4.6     J1IF01
Create Billing Document     VF01
Post goods receipt with reference to purchase order     MIGO
Post invoice verification     MIRO
this is process for job work ,
this is for one proces another process as same for this document but this maintain the
va01-vl01n(movement type 541)-j1if01 her u can cant maintanin any prise
ofter comes to finshed product ,
u can maintian this process: jobwork charges
va01_vl01n_vf01_j1iin
u maintain the settings for vov8 delivary type only,
in this process u can matain the vov8 for one document type ( it for only internaloreder jobwork)
ofter jobwork chages vov8;maintain normaly
for job work for other material /(rawmaterial) u maintain tcode for j1id - maitain the assessable value for revelant material and plant, and matain subcontract activae in material and chepted id comination,
this cin setting
so u maintain the
two ordr type one is jobwork internal order
another one is job work charges
and also maintain the copy controls(internla order)
Order requirements :    001
Combination requirmt:   051
Header Data :           001
Header Data Ext. Sys : 0
Handling Units :       000
u maintian thia routines for header
Sales doc. type:         jobwork internal ord
Item category   :        Job work item
Order requirements:    101   Item
Item data:      901   Item(101 div change)
Item Ext. System   :    0
Business data ;        2     Business Data
this for item details for copy contols
as same of internal order
here comes billing
it for coman billings routines

Job work sales Process

Hi all,,
can any one hlep me on Job work process and CIN related process for job work
Regards
Mastan Rao

Check these threads
[Re: Job work in SD subcontracting. |Re: Job work in SD subcontracting.]
[SD Enterprise structure |SD Enterprise structure]
thanks
G. Lakshmipathi

Discrete Job Component Pick Release (SRS)

Hi All ,
For Push - Supply type , we can issue items to the job manually . Could any one brief purpose of Discrete Job Component Pick Release (SRS) in WIP
Thanks
Kiran

Hi,
Pls check if below MOS(metalink) note helps you:-
Move Order FAQ #2: Quantity Delivered vs Detailed in Move Order Lines (MTL_TXN_REQUEST_LINES) [ID 431479.1]
11i Move Order Transaction - FAQ [ID 114156.1]
Oracle Work in Process Product Documentation [ID 67009.1]
Also below discussion:-
http://kr.forums.oracle.com/forums/thread.jspa?threadID=951381&tstart=0
http://www.oracleug.com/user-guide/work-process/component-pick-release
Thanks,
JD

QUERY TO LINK DISCRETE JOB AND SALES ORDER

Hi Experts,
I am working in Work In Process module.
I need a query to find the Sales Orders for particular Discrete job
I am in the urgent situation, kindly help me.
Thanks in advance.

Hi;
Please check below thread which could be helpful for your issue:
http://forums.oracle.com/forums/thread.jspa?messageID=9155702
Regard
Helios

DISCRETE JOB을 UNCLOSE 시키는 방법

제품 : MFG_WIP
작성날짜 : 2002-11-27
DISCRETE JOB을 UNCLOSE 시키는 방법
============================
PURPOSE
Close 된 discrete Job을 Unclose 시키는 방법
일반적인 standard 화면에서는 'UNCLOSE' function을 볼수 없다.
'UNCLOSE' function을 enable하는 방법과 실질적으로 Job을 unclose 방법
Explanation
** 'UNCLOSE' function enable하는 방법
1. responsibility = SYSADMIN
(N) Application > Function.
2. Query the Function = WIP_WIPDJMDF_CLOSE
3. Form tab. 에서 'PARAMETERS' 필드에 다음과 같이 넣어준다
FORM_MODE="CLOSE" MAINTAIN="N" UNCLOSE="Y"
** Discreate Job 을 Unclose 하는 방법
1. responsibility = Oracle Work In Process
(N) Discrete > Close Discrete Jobs > Close Discrete Jobs(Form)
2. Query the job or jobs to be unclosed.
3. Perform Optional Steps
- click on Tools
- click on Unclose 1
** 다음과 같은 경우에는 Job을 Unclose 시킬수 없다
1. Job status가 Close가 아닌경우
2. Unclose하고자 하는 job에 sales Order가 link되어 있는 경우
3. Accounting Period 가 close 된경우
Example
Reference Documents
-------------------

Discrete job completion date on Sunday

Hi All,
I wanted to know how the discrete jobs completion date can be on Sunday when the manufacturing calendar days showing the Sunday as non-working days.
When calculating the completion date for those discrete jobs, it actually considering the item/part lead times.
As for example, an item # ABC has processing lead time as 2 days and the discrete job start time is on 29-JAN-2015 18:34:00 and has the completion date as 01-FEB-2015 19:35:00 (Sunday).
let me know if there any issue with any setup or profile options.
regards,
Subhasish

Hi,
We also had the same issue, the Workorder completion date and start date were including Non-working days.
"Why Discrete Jobs Form Is Not Computing Completion Date Based On Workday Calendar? [ID 1450120.1]"
The above metalink note might help you. All the resource on the assembly must be "Available 24 hrs" and make sure you have not inculded Saturdays and Sundays as a working day in you Manufacturing calendar (Assigned at org parameter).
Thanks, Sameet
Edited by: Sameet on Mar 11, 2013 11:58 AM

Serial control in wip discrete jobs

Hi gurus,
i had created a discrete job with serial control enabled for components.
but when trying to query for job im unable to get it.
so whats the mistake i did?
when going thru oracle white papers they mentioned to change profile option
TP:WIP Operation backflush setup to online processing mode.(for having serial control in job)
but i cant able to get the profile option in wip responsibilty.
will u pls guide what are mandatory steps for building discrete jobs with serial control and to perfor move transactions?
waiting for solution pls.

Dear Mr.Riccardo
I would like to bring to your notice a document from Metalink. It says that we cannot do move transaction of Serial controlled Items in Desktop forms.....
Subject: Is Serial Number Association Functionality Only Available Using Supply Chain Mobile Applications?
Doc ID: Note:265512.1 Type: HOWTO
Last Revision Date: 01-APR-2004 Status: PUBLISHED
The information in this article applies to:
Oracle Work in Process - Version: 11.5.9
This problem can occur on any platform.
Goal
Is the new functionality of Serial Number Association only available through Mobile Applications?
Fix
This functionality provides support for standard discrete jobs with or without a routing.
The User Interface for this functionality is via Mobile Applications
Serialization can be activated within a job...this can be for entire job or beginning at
a specified operation.This new feature is optional. It is defaulted by org parameter and controlled at the job level. The user will need to define the default to steps for the moves.
When turned on, then when Jobs are created automatically ...via CTO or Planning, the serial will be turned on.
The current functionality of serial number generation and uniqueness is used. Auto-generation and association at the time of job creation via Mass Load is added with this functionality. Also import of serials from 3rd party systems is supported.
The serial association can occur anytime during or after job creation. Users can use pre-generated or on-the-fly serial numbers. This association is also not tied to job quantity and is changeable until assigned to a specific unit.
Once the job is 'Serialized', you cannot transact this job through any of the Desktop forms. A new Menu structure is added in the Mobile Applications called 'Serialized Assembly and Material Transaction'.
Users utilize the mobile pages under this menu to perform serialized move or completiontransactions.
These assembly items for which the serial numbers are associated at the time of creating the wip job itself can be transacted only through Mobile Supply Chain Applications (MSCA) .

Customizing Discrete Job Data Report

Hi experts,
I need to customize "Discrete Job Data Report" in Apps 12.1.1 from rdf to xml format , can any one provide me eTRM for Manufacturing track and User Manual , So I can understand the Database tables to customize the report........
Actually I want to add waste column in roport , from which table and column I have to add...
Regards,
Awan

Hi Awan,
You can find the eTRMs here though usually a query executed in the database and the review of the data obtained will give you a better idea than the TRM.
You can find the documentation for R12.1.1 here. You can find the Oracle Work in Process User's Guide there.
Not sure about how to get the waste column but I think the best way of finding it is opening the report, executing the main query inside and checking the tables involved in the query.
Hope it helps.
Regards.

Change Department after the Discrete Job got Completed

Hi All,
Please let me know how to change the Department (in Operations) even after the Discrete Job got completed.
This is in Oracle Applications (11.5.10),Oracle Work in Process module.
Thanks a lot.

You will have to undo completion, then undo every operation step (including resource transactions), modify the resource requirements to 0, add new operations and resource requirements and take the job thru' completion.

Error When Submitting WIP Mass load Concurrent Program (Work in Process)

Hi,
I am submitting WIP Mass Load concurrent program to get the data from WIP_JOB_SCHEDULE_INTERFACE table in to base tables.
The concurrent program is completed with Warning status.
My Package inserts the data into wip_job_schedule_interface table to create a WIP Job. After inserting the data in to wip_job_schedule_interface table, it submits a concurrent program (WIP Mass Load) (Standard concurrent program) to create a WIP job automatically from the data inserted into wip_job_schedule_interface table.
This concurrent is errored out with the following warning message:
===========================================================
Group ID: 7026 Report Date: 23-OCT-2007 12:26
Job and Schedule Interface Report Page: 1 of 1
Create Discrete Jobs
Source Code: XXEXT019
Organization: DVR
Process Process
Job Job Type Assembly Quantity Start Date Completion Date Kanban Card Phase Status
6094-3 Non-standard DEV-GA-1 1.00 23-OCT-07 11:57 23-OCT-07 11:57 Validation Error
Error: Invalid or insufficient Completion Subinventory/Locator information.
Check that you have entered valid subinventory/locator information based on the organization and assembly
that you have chosen.
0 out of 1 jobs were successfully loaded
=========================================================
I populated locator information in to the interface, then too its saying the same.
Can you please me know where exactly i am going wrong. Help Appreciated.
Thanks

Have a look to the Metalink note "Note:207646.1", which deals with the error "WIP_ML_ORA_ERROR (ERROR_CODE=-1653)".

Component Pick Release for Partial Discrete Job Quantity

I'm on 12.0.6 and we currently do not use component pick release, but we are considering doing so.
My employer currently creates a single discrete job (say 120 items) and then completes that discrete job over several days. Say they plan to produce 30 a day over 4 days. Is there a way to use component pick release to release that partial quantity?
So if we have three shifts running and we want to produce 30 a day, 10 each shift. We want to run component pick release 3 times a day for four days, only releasing the components needed for 10 assemblies each time? Possible?
Is the only alternative to create 12 different Work Orders?

when the move order is created..update the allocation and then perform transact move order
ex if for 10 qty move order is created..but if u wish to issue 5 qty to the job..then update the allocation..for the remaining u can just backorder the move order
HTH
Mahendra

Process chain jobs struck in released state

Hi,
We have a strange problem with process chains, After the process chain is
triggered in the middle of the PC, one of the process step job is getting struck
in released state and not moving to active, what might be the probelm, please suggest.
Thanks.

Hi....
Actually this issue sometime happens due to more number of active jobs in the system.........If the number jobs running is huge.........then there will be no free work process.........and all the jobs will stucked in release state only......
Also due to poor system performance also we face this issue.......check ST04 if there is any locks or deadlocks.......Also check ST22 for shortdumps and check the system log in SM21.........
This also sometimes happens due to memory problem.....
You can manually trigger the event to make the job active ..........Right click on the process>> Go to Display messages >> from the chain tab copy the After event and With Parameter.............go to sm64.............search the after event >> click on execute>> give the parameter and execute............it will start the job.............
U can also use the Function module BP_EVENT_RAISE............go to SE37 >> BP_EVENT_RAISE >> Click on Text/Execute.........give the copied event and parameter and execute.......
Hope this helps........
Regards,
Debjani.........

How to delete process flow jobs

hi all,
need a piece of advice here. any idea how i can delete a process flow job scheduled using OEM without?? is there another way to do it without having Oracle Workflow Monitor? plz advice..
regards,
ykl

Hi,
If you meant to delete all the Process Flows deployed into Work Flow schema without using OEM, then take a look at the scripts available in WF Schema under the directory - <your oracle home>/wf/admin/sql.
The scripts you will be interested in are wfrmitt.sql which prompts you for the Process Flow Package Type and removes all the relevant information from the Work Flow schema. There are other scripts as well. Please look into those.
Thanks
Mahesh

Work in process discrete jobs

Similar Messages

Maybe you are looking for