Work Item Not getting Deleted

Hi
We have a starge issue.
We use the table SWWUSERWI to see all the work items in the user's inbox.
If we delete the work item in this table it will remove the same from user's inbox.
We have a problem now. Even after we deleted all the work items the SRM "Approval" link and the "Inbox" still contains Workitems( more than 200 ).
Is there anyother table or tCode to find the work items in user's inbox'
Thanks
Siva.

HI experts!!
The issue is solved!!!
The another user who is not with the company currenlty had maintained the user who had problem as substitue!!!.. we had to remove the substitute to solve the problem.
Thanks
Siva.

Similar Messages

Work Item not getting logically deleted

Hi All,
We have created a custom workflow for PR approval at Item Level. I have RELEASE STEP CREATED as triggering event.
I have used a FORK with 5 branches with 4 wait events and min cond as 1. The inherited business object ZBUS2009 has been created with events CHANGE, DELETED. The business object has been delegated to Original Business object BUS2009.
To trigger the events like DELETED and CHANGED, I have used POSTED METHOD of ME_REQ_POSTED BADI.
When a PR Item is created the agents are determined successfully and work item is placed in his SAP Inbox. Later the PR Item has been deleted and saved the BADI Implementation is triggered and I can see the log in SWEL for DELETED event with success icon.
However when i go back to PR Item which i have deleted and see the workflow log the work item is still in the approver's inbox. but the graphic log shows that the DELETED branch of the fork is completed. I tried all options like Buffer synch, background job, queue admin etc with no success.
I did the same workflow at one of my previous clients and it is working perfectly for last 2yrs.
Can any one guide me on what could have gone wrong or what i am missing?
Thank you all in advance for help...
Regards,
Lakshmi Narayana

Hi Arghadip,
Thanks for your quick response.
The fork is having 5 parallel branchs and 1 necessary branch and is INDEED HAS NO EXTRA CONDITIONS.
Also as i mentioned the graphical log shows that the completion of BRANCH Beneth DELETED but the work item is still in approver's inbox.
Please let me know if I am missing something....
Rgds,
Lakshmi

Work item not getting displayed in the portal

Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
 <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
 <Actions>
 <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
 <Properties>
 <Property name="WebDynproApplication" value="ApproveFormApp"/>
 <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
 <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
 <Property name="openInNewWindow" value="yes"/>
 <Property name="display_order_priority" value="5"/>
 </Properties>
 <Descriptions default=""/>
 </Action>
 </Actions>
 </ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION ApproveFormApp
PACKAGE sap.com/pa~asr~formstep

ERMS : Email work items not getting created

Hi Forum
In my test system (CRM 2007), inbound mails were properly coming in and getting distributed to agent's inbox. But after the server restart, I realised that the work items for inbound mails stopped getting created due to which mails are not reaching agent's inbox.
Mails are visible in SOIN but their associated Work items are not there in SWI1.
I have checked almost all the settings like Email Distribution (SO28), CRM_ERMS_WF_CUST (Event lining is in place and is active), swu0 (Event simulation is working).... but still not sure why work items are not getting created for inbound mails.
Any thoughts ? Help will be deeply appreciated.
Regards
Vishal Mani

Thanks Bruno for your time to reply !
I checked this transaction and in overview there are 19 events with errors. But apart from that everything is green.
I checked the Linkages with Error tab and realised that the events with errors belong to object type BUS1006.
In Activation tab --> Linkages --> Object type (ERMSSUPRT2) --> Linkage is activated.
Infact that is the first thing, I checked when work items were not getting created.
So no clue from here too.
Regards
Vishal Mani

Work Item Not Getting Executed

Hi,
I am using the Standard workflow WS20000077 for Purchase Requisition release.
In the standard task "TS20000159" I have maintained the agent as my user name for test purpose.
I have also activated the event linkage for Business object BUS2105 and Workflow WS20000077.
I have maintained the User againest the release code in the customising activity.
I am getting an workitem in my inbox stating that "Please release purchase requisition" whenever a purchase requisition gets created.
When I am executing the workitem nothing is happening..No Tcode gets opened for release.
Pls suggest what may be the problem..?

It would be nice if you would post the cause and solution for the benefit of others.
Regards,
Martin

UWL items not getting cleared after performing action

Hello
We are on EP 7.0.
We are experiencing a strange behaviorin UWL.
When end users receive workitems in their inbox and they take the appropriate actions, the workitems still stay in the inbox. Normally they should no longer appear.
I have tried the refresh in the UWL iview but no luck.
It seems to work in DEV and other landscape. It does no work in Production. The software installation of UWL are the same across all landscapes.
Is there any other setting that is required. In SAP GUI this is not an issue.
Any feedback or tips would be helpful. thanks.
Regards,
Sunil

Hi,
As far as I can remember, this is a known limitation of UWL.
Please, check this thread : UWL work item not getting cleared
I am unsure whether you use the correct button the refresh the UWL (it is well hidden!), check the slide 6 in this document :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6&overridelayout=true
Best regards,
Guillaume

The Subsequent Requirm not getting deleted after deleting the Item from P.O

Hi all
The Subsequent Requirment for the Material is not getting cancelled even after deleting the Item from the Purchase Order and we have even deleted the Requirment for the Top level material . If we click on the Pegging requirment for the Subsequent requirment the system is telling that no Pegging Requirment exists but it is not getting deleted. Waiting for the feed backs

Kumar,
Run MRP for the Materials involed and let us know if there are any exception messages.
Regards,
Prasobh

Workitem not getting deleted from SAP inbox

Hi ,
I have a scenario in workflows , in which when a user creates a timesheet , a mail goes to approver , when the timesheet is approved the mail should get automatically deleted .
We have created a standard task for this purpose ( a copy of TS31000007) .
The business Object is CATS , terminating event is COMPLETED , method is APPROVE . There is no triggereing event a FM is being used .
The standard task is copied in two test environments , from first system the mail gets automatically deleted , but from the second one it is not getting deleted .
Also the workflow log in SWEL doesnt show any rows in the second system .
In the first system , there are 4 steps in the workflow log :
Dialog work item created
Background process started
terminating event received
work item processing complete
Though the workitem has deleted , but the status of the workflow is in Progress
while the second has only two steps in workflow log
Dialog work item created
Background process started
and the workflow status is "Ready"
I guess the terminating event in the second case is not getting received .
but ,I have checked sweinst and found that the instance linkage is activated .
Also when the workitem is approved , it does not get delete , and if we try to re execute it again , the gives a msg " NO data found "
Can someone help me to find why the mail is stuck in the inbox and correct this problem.
Thanks
Sheetal

Unless and until the Terminating event is triggered the workitem will not disappear. Check how the Event is getting triggered in other system. I feel it is getting triggered by standard means. Check whether there is proper settings in SWEHR3.
It means that you are not doing any special configuration for event triggering or coding. Please check what is missing in the system you are having problem. Check SWU3 setting is fine or not.
Please close thread when issue resolved
Thanks
Arghadip
Message was edited by:
Arghadip Kar

File is not getting deleted in File-RFC-File without BPM

Hi,
I'm working on File-RFC-File scenario without BPM. Everything is working fine except file is not getting deleted after the process. I'm passing xml file here and in return it will give the xml success/error message from RFC.
For the sender CC, I'm passing the following parameters,
Transsport protocol: File system
Message protocol: File
QoS: BE
Poll Interval: 30 sec
Mode: Delete
File type: Binay
Please let me know if I missed anything while passing the values.
Thanks,
Swamy
Edited by: Swamy Mothe on Jun 15, 2009 8:52 AM

Hi
Then , is Sender and receiver File Adapter is using same folder )
Just a question.
But having all permisions and above config would delete the file
can u see the status of u r File Adapter in RWB.? Is it in green?
rgds
srini

Error in mail box work item not executable

HI,
i build simple WF for approve and reject that send for user to sap inbox
some decision ,when i check the inbox of the user and double click on the line i get some red triangle in the status Colman with
error work item not executable,
what can be the problem?
Regards

HI Raj,
i build very simple WF ,
user decision , i put there user and approve and reject that it.
i execute the WF and go to the SAP user inbox.
in the Work Flow folder i see the task in column executable i see green V work item executable,
status ready when i double click on it to open i get in column executable message work item not executable ,
and status error ,What it can be?
P.S. i check something like that in other system and i don't get the error .
i start the trace SWELS but in SWEL i just see in the log Trace on trace off nothing more .
Best Regards

Cookies do not get deleted / re-appear within seconds if I delete them manually and yes I've checked every single support page about this and it didn't help

– I have the most recent version of Firefox.
– I have my settings in Preferences -> Privacy on "Keep third party cookies until I close Firefox".
– I've checked "Clear history when Firefox closes" and have ticked every single box under settings (except saved passwords).
– But still, Cookies do not get deleted when I close Firefox – there are hundreds of cookies every time I open it.
– If I go to Tools -> Clear recent history, choose "everything" and tick every single box, history etc. get deleted but the cookies remain.
– If I go to Preferences -> Privacy and click "Show Cookies" and then click "Remove all cookies" twice, the cookies disappear, but they're back just seconds later.
– I've even tried going to Preferences, clicking on Exceptions and manually adding some of the websites that showed up under "show cookies" and blocking them and then deleting the cookies, but still they re-appeared within seconds, and the exceptions were blank again.
– I've checked all your support pages about this topic.
– I've seen this https://support.mozilla.org/en-US/questions/740598?esab=a&as=aaq and tried it and it didn't help.
– I've seen this https://support.mozilla.org/en-US/questions/936308?esab=a&as=aaq and this https://support.mozilla.org/en-US/questions/868910?esab=a&as=aaq, and yes I do use "Do Not Track Plus" and some of the Cookies seem to be Opt-Out-Cookies but most are not.
Please help me. I used to be a big fan of Firefox but this is getting really scary.

You can't remove opt-cookies that are added by an extension unless you disable or uninstall that extension, so you can disable the do not track extension as a test to see if that allows to remove the cookies.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If clearing cookies doesn't work then it is possible that the cookies.sqlite file that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookie files like cookies.sqlite-journal in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder

Temporary files are not getting deleted

Hi All,
I am using informix database and my code is reading BLOB from database and writing the image to different storage media. The program has to run for number of images. It is writing to media successfully but not exiting even after printing the last statement in program. it is generating some temporary files ifxb_* . If I use System.exit() garbage collection is not happeneing and temporary files not getting deleted.
I am storing BLOB to an InputStream. and closing all the Connections and ResultSet before exit.
Can anyone please tell why program is not exiting normally?

gtRpr wrote:
It doesn't make much sense to me to go through extra work to make code insecure, when doing things the right way is easier and more secure.@yawmark - I get it, relax.
I never used them last year because I only found out about there existance about 4 Months ago.
And guess what I have never used normal statements for something like that again.
Only time I use a normal Statement is when I run that query only once, and no the entire query is hardcoded so no need for any worries due to security.Um ... D'you post this to the wrong forum/topic?
Anyway, OP ... I don't know a thing about informix, so perhaps a trip over to IBM would help ... they have lots of information on their site. You might want to try a different forum right here at java.sun.com as well.
About those closing of Connections and Resultsets ... are they in finally clauses? They should be.
~Bill

REM tick not getting deleted for Part no

Dear All ,
we have one material which had Procurement type " E " ( In-house SFG ) , But now the Part is totally Procured from vendor .
So the Procurement type is changed to " F " . So we need to do the Material Master Correction .
If we Try to delete REM tick from Material Master , Following Message is seen >>>>>>
Production versions exist for which repetitive manufacturing is allowed
Message no. M3636
If Try to delete the REM tick from Production Version , Following Message is seen >>>>>
Production version 1 or repetitive mfg indicator cannot be deleted
Message no. KOSA012
Even the Production Version is not getting deleted . Following Message is seen >>>>>
Production version 1 or repetitive mfg indicator cannot be deleted
How to handle the above issue ? Please guide . Thanx in advance

Dear Vasu,
check after performing these activities,
Deleting the Production Version
Use
The production version contains the technical information on how a material can be manufactured. If this technical method has become outdated, you can delete the production version.
Prerequisites
1.You must settle the product cost collector you created for the production version.
2.No more planned orders exist in the system which are assigned to this production version.
3.If you work with reporting points in make-to-stock REM, no more work in process (WIP) exists on the production line in question. That is, work in process must be closed in the period-end closing in Cost Object Controlling.
4.If an inspection lot exists, you must already have made the usage decision for the inspection lot.
5.For the period in which the last reporting point backflush was carried out and for all previous periods in which the run schedule header or the production version is valid.
6.the cutoff period is set for the WIP calculation
7.the cutoff period is set for the variance calculation (operation KVAR)
Regards
Mangalraj.S

Setup tables data not getting deleted for application 11

Dear Team,
Trying to delete data from setup tables after completing few fields enhancements
System triggering following error message and the data is not getting deleted
Step 001 started (program RMCSBWSETUPDELETE, variant &0000000000010, user ID 00938H744
Database problems with table MC11VA0ITMSETUP
Job cancelled after system exception ERROR_MESSAGE
Please guide
Thanks,
Sarasu

Try to adjust the database tables using SE14 transaction.
SE!4 --> Enter table name MC11VA0ITMSETUP -->Select radio button "tables" --> click on Edit -->Select processing type "Background" --> Click on "Activate and Adjust database".
Here before performing the Activate and Adjust database function -- first try to check the data base object (click on check button and select database object --ok) if every thing is ok then proceed with the above steps.
Next try to delete the setup tables and check.. hope this should work.
Try to check the logs in SM21 and also check if the data source is active or not before deleting the setup tables.
Regards
KP
Edited by: Konduru Prashanth. on Mar 2, 2012 6:08 PM

Exchange mail account not getting deleted - Iphone froze

Exchange mail account is not getting deleted if i try it and
it frozes the iphone.
Switch off the phone and restarting doesn't help
Same thing happens when you try to change contact off in exchange mail properties.
I have 3G iphone with firmware 2.1

I have the same or a similar problem - after my update to the firmware on friday, i have intermittent ability to download email.
i have 4 accounts on my phone - a mobile me account, 2 accounts through Cox servers, and my exchange account. I was able to download from all accounts just once after updating the firmware 3 days ago.
The Cox accounts are the only ones that work - and only sometimes. outbound emails become phantom emails and go nowhere.
I lost the domain information in my exchange account. when i go in to update it, it freezes and won't save the new domain or let me leave the settings screen unless I hit the home or sleep/wake buttons.
i tried deleting the exchange account to recreate it, but it freezes on that.
I lost my calendar entirely.
i had to resync my contacts.
this is worse (much worse) than before the firmware fixes.

Work Item Not getting Deleted

Similar Messages

Maybe you are looking for