Work Item Not Getting Executed

Hi,
I am using the Standard workflow WS20000077 for Purchase Requisition release.
In the standard task "TS20000159" I have maintained the agent as my user name for test purpose.
I have also activated the event linkage for Business object BUS2105 and Workflow WS20000077.
I have maintained the User againest the release code in the customising activity.
I am getting an workitem in my inbox stating that "Please release purchase requisition" whenever a purchase requisition gets created.
When I am executing the workitem nothing is happening..No Tcode gets opened for release.
Pls suggest what may be the problem..?

It would be nice if you would post the cause and solution for the benefit of others.
Regards,
Martin

Similar Messages

Work item not getting displayed in the portal

Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ApproveFormApp"/>
            <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION     ApproveFormApp
PACKAGE     sap.com/pa~asr~formstep

ERMS : Email work items not getting created

Hi Forum
In my test system (CRM 2007), inbound mails were properly coming in and getting distributed to agent's inbox. But after the server restart, I realised that the work items for inbound mails stopped getting created due to which mails are not reaching agent's inbox.
Mails are visible in SOIN but their associated Work items are not there in SWI1.
I have checked almost all the settings like Email Distribution (SO28), CRM_ERMS_WF_CUST (Event lining is in place and is active), swu0 (Event simulation is working).... but still not sure why work items are not getting created for inbound mails.
Any thoughts ? Help will be deeply appreciated.
Regards
Vishal Mani

Thanks Bruno for your time to reply !
I checked this transaction and in overview there are 19 events with errors. But apart from that everything is green.
I checked the Linkages with Error tab and realised that the events with errors belong to object type BUS1006.
In Activation tab --> Linkages --> Object type (ERMSSUPRT2) --> Linkage is activated.
Infact that is the first thing, I checked when work items were not getting created.
So no clue from here too.
Regards
Vishal Mani

Work Item Not getting Deleted

Hi
We have a starge issue.
We use the table SWWUSERWI to see all the work items in the user's inbox.
If we delete the work item in this table it will remove the same from user's inbox.
We have a problem now. Even after we deleted all the work items the SRM "Approval" link and the "Inbox" still contains Workitems( more than 200 ).
Is there anyother table or tCode to find the work items in user's inbox'
Thanks
Siva.

HI experts!!
The issue is solved!!!
The another user who is not with the company currenlty had maintained the user who had problem as substitue!!!.. we had to remove the substitute to solve the problem.
Thanks
Siva.

Work Item not getting logically deleted

Hi All,
We have created a custom workflow for PR approval at Item Level. I have RELEASE STEP CREATED as triggering event.
I have used a FORK with 5 branches with 4 wait events and min cond as 1. The inherited business object ZBUS2009 has been created with events CHANGE, DELETED. The business object has been delegated to Original Business object BUS2009.
To trigger the events like DELETED and CHANGED, I have used POSTED METHOD of ME_REQ_POSTED BADI.
When a PR Item is created the agents are determined successfully and work item is placed in his SAP Inbox. Later the PR Item has been deleted and saved the BADI Implementation is triggered and I can see the log in SWEL for DELETED event with success icon.
However when i go back to PR Item which i have deleted and see the workflow log the work item is still in the approver's inbox. but the graphic log shows that the DELETED branch of the fork is completed. I tried all options like Buffer synch, background job, queue admin etc with no success.
I did the same workflow at one of my previous clients and it is working perfectly for last 2yrs.
Can any one guide me on what could have gone wrong or what i am missing?
Thank you all in advance for help...
Regards,
Lakshmi Narayana

Hi Arghadip,
Thanks for your quick response.
The fork is having 5 parallel branchs and 1 necessary branch and is INDEED HAS NO EXTRA CONDITIONS.
Also as i mentioned the graphical log shows that the completion of BRANCH Beneth DELETED but the work item is still in approver's inbox.
Please let me know if I am missing something....
Rgds,
Lakshmi

UWL items not getting cleared after performing action

Hello
We are on EP 7.0.
We are experiencing a strange behaviorin UWL.
When end users receive workitems in their inbox and they take the appropriate actions, the workitems still stay in the inbox. Normally they should no longer appear.
I have tried the refresh in the UWL iview but no luck.
It seems to work in DEV and other landscape. It does no work in Production. The software installation of UWL are the same across all landscapes.
Is there any other setting that is required. In SAP GUI this is not an issue.
Any feedback or tips would be helpful. thanks.
Regards,
Sunil

Hi,
As far as I can remember, this is a known limitation of UWL.
Please, check this thread : UWL work item not getting cleared
I am unsure whether you use the correct button the refresh the UWL (it is well hidden!), check the slide 6 in this document :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6&overridelayout=true
Best regards,
Guillaume

Error in mail box work item not executable

HI,
i build simple WF for approve and reject that send for user to sap inbox
some decision ,when i check the inbox of the user and double click on the line i get some red triangle in the status Colman with
error work item not executable,
what can be the problem?
Regards

HI Raj,
i build very simple WF ,
user decision , i put there user and approve and reject that it.
i execute the WF and go to the SAP user inbox.
in the Work Flow folder i see the task in column executable i see green V work item executable,
status ready when i double click on it to open i get in column executable message work item not executable ,
and status error ,What it can be?
P.S. i check something like that in other system and i don't get the error .
i start the trace SWELS but in SWEL i just see in the log Trace on trace off nothing more .
Best Regards

In PO Release "PO release effected" is not getting executed

Hi All,
           I am working on PO Release WorkFlow.
when I execute the WF of PO release, its executing the first task "please release PO" but when I relase the PO from my work place the second step "PO release effected" is not getting executed. I could not found why this is happening.
Please help me in this issue.
Thanks.
Ranganadh.

Thank You Adithya,
                                 I have copied the standard one i.e. WS20000075. I am executing the workflow directly from the Workflow builde by giving the PO number and release code.
with this in my business workplace I can able to find the workitem.
         I am releaseing the PO from the Workplace. After releasing the PO also I am getting the status of the workitem as "Inprocess".
         In workflow log I found that only first task (PO Released) has been executed the subsequent steps are not getting executed.
         Would be there any settings are missed out??
Thanks.
Ranganadh.

Fault policies not getting executed for called BPEL process

Hi,
I am facing one issue in execution of fault policy for a called BPEL Process.
I have two BPEL Processes - BPELProcess1 and BPELProcess2.
We have fault-policies and fault-bindings file.
Case1 - BPELProcess2 is synchronous :-
BPELProcess2 throws a fault of selectionFailure.
Now this fault is defined in fault-policies and fault policy is bound to BPELProcess2 component in fault-bindings.xml file.
But this fault policy is NOT getting executed.
This selectionFailure fault from BPELProcess2 goes unhandled and in BPELProcess1, invoke activity gets this unhandled fault and raises a fault "remoteFault".
This remotefault is also defined in fault-bindings and bound to BPELProcess1 component. Here fault policy bound to BPELProcess1 is working fine.
So problem is that for called process, fault policies are not getting executed while for calling process, they are getting executed.
Case1 - BPELProcess2 is Asynchronous
BPELProcess2 is asynchronous. So same situation happening here. Fault policy for BPELProcess2 is not getting executed on throwing selectionFailure.
But now here, since BPELProcess2 is async in nature, BPELProcess1 is not getting response and it is always waiting for response which is wrong.
So how can we use fault policies in this case?
Please suggest.
Thanks & Regards,
Parshant

So that means - only fault originating from invoke activity in BPEL can be associated with a fault policy. No other fault can be associated. Even if I throw a selectionFault from throw activity, that will not be captured. Only fault from invoke activity can be associated with a fault policy.
Please confirm.
Thanks,
Edited by: 833944 on Feb 24, 2011 9:36 PM

Infopackage not getting executed through Process Chain

Hi All,
I am facing a strange issue in BW Process Chain. Sometimes 3 Infopakages in my Process Chain is not getting executed and the variants get stucked in Yellow state. I checked the status of variants in RSPCPROCESSLOG table and they went in Undefined State.
Can anyone tell why this happening and how to resolve that issue permanently.
Thanks,
Javed

Hi Javed,
When you trigger the process manually, it might work.
But, as Raman told - some times due to huge number of loads running at the same time, the Back ground processes will be heavily occupied and loads will stuck. By the time, you trigger them manually; they will be successful due to some of the back ground processes which becomes free by that time.
Though this will not happen all the time. But this can also be the reason. Try checking, if the loads are getting stuck in yellow with "Target event" "with parameter" getting generated in display messages --> chain tab or not.
Thanks,
Vikranth.

Java Dynpro - Consumed Java WebService - Not getting executed

I have consumed a Java Web Service ( EJB ) in my Java Web dynpro code ( using Import Web service Model ( Not adaptive ))
Successfully consumed.
But the Web Service Model is not getting executed by this code -
Request_CreatePortalUsrWebServiceViDocument_createUsr createPrtUsr = new Request_CreatePortalUsrWebServiceViDocument_createUsr();
     wdContext.nodeREQUEST_CREATEPORTALUSRWEBSERVICEVIDOCUMENT_CREATEUSR().bind( createPrtUsr );
try {
     wdContext.currentREQUEST_CREATEPORTALUSRWEBSERVICEVIDOCUMENT_CREATEUSRElement().modelObject().execute();
          wdContext.nodeResponse().invalidate();
     } catch (Exception e) {
          // TODO Auto-generated catch block
          e.printStackTrace();
This Web Service resides on the local portal server.
Thanks,

Hi,
First, have you tested that the web service works if you run it directly in the WS Navigator?
Here is a snippet of how I usually call web services:
public void getUserControlTable( )
    //@@begin getUserControlTable()
          //     Clear down existing context
          wdContext.nodeGetUserControlTable().invalidate();
          // Create model object
          DBMaint_ConfigServicesFactoryWS model = new DBMaint_ConfigServicesFactoryWS();
          // Create context elements
          Request_GetUserControlTable request = new Request_GetUserControlTable(model);
          GetUserControlTable method = new GetUserControlTable(model);
          request.setGetUserControlTable(method);
          // Bind to context
          wdContext.nodeGetUserControlTable().bind(request);
          // Call service
          try {
               wdContext.nodeGetUserControlTable().currentGetUserControlTableElement().modelObject().execute();
          } catch (Exception ex) {
               wdThis.wdFireEventDisplayDebugMessage(
                    "Error calling CanUserConfigureApp service - " + ex.getCause().toString());
               wdThis.wdFireEventDisplayErrorMessage(
                    "Unable to read User Control table - configuration not currently possible",
                    null,
                    null);
               return;
    //@@end
I'm not sure why you aren't creating a model object as I cannot instantiate my objects without it - maybe it is because you are using a non-adaptive WS model. Why aren't you using the adaptive WS Model?
Also, I don't see where you are creating a method/operation object, you only seem to create the top level Request object. I'd expect you to need to create the operation level object too and add that into the request, as I do above.
There is little point in outputting the stack trace like that - I always use the message manager object to display errors and debug message on screen. I think you should at least add some debug messages to try and pinpoint what is going wrong.
Gareth.

Queries are not getting executed in the EJB

Hi,
I am using Stateless EJB for database transactions. I have one getConnection() method in it which I am calling in every method for connection. I have created one more method in that I am executing one simple query for count(*) from one table and returning the count in the Web dynpro application. But I am not getting the count. It seems the query is not getting executed. I have added classes12 jar externally to the EJB and also to the WebDynpro application. Is there anything I am missing????
Thanks,
Swati Gaur

Hi Swati Gaur,
Did you print any logs in the your code to print the count after executing the query?
For debugging purpose you can try
System.err.println("Count after executing the query "+count);
count is the variable which contains the count after executing the sql query.
Check for the above statement in default trace. If count is printing in default trace then the problem is in your webdynpro code.
Hope this helps!
Regards,
Jaya.

Deadline branch not getting executed

Hi
In my BPM i have an infinite loop and also the deadline branch with inerval as 1 minute (for testing purpose) but when i send the message my deadline branch does not get executed after 1 minute and it keeps on waiting.
in the bpm monitoring it shows wait step created.
i have verified my design with the standard pattern available, and it is almost similar.
i am not able to find out the reason behind this strange behavior.
Regards
Dheeraj

Hi Saravana
i did exactly the same, i have my deadline branch, in it i have my control step which trows exception, which is catched by my exception branch and does nothing, so ideally it should continue the processing after that.
but the problem is the exception is never thrown.
my deadline has been configured as
Reference Date/Time: Creating the step
Duration: 1
Unit: Minutes
control step in deadline branch
Action: Throw Exception
Exception: Time_out
Exception branch
Exception Handler: Time_Out
and outside this block i have transformation and other steps... which shoul get excuted after 1 minute deadline.
Regards
Dheeraj

Tasks not getting executed as per schedule

Hello Gurus,
my query is with respect to tuxedo 7.1 / singleview 4.02.17.01.
I am facing some new issues these days with singleview.
Whenever we submit any task in singleview, it is not getting executed on its scheduled time.
this has been happening from past few days.
worstly,nothing has been found in logs.
Interestingly, twice it happened that i took down the application & after the app was brought up,these "NOT" executed tasks started automatically.
Why this could be happening?
unix file " stdout" <standard output> is getting written heavily & reaching its MAX size ( 2 GB) in less than 24 hrs.
i have changed its schedule as of now,but has it got anything with above problem?
Finally,i have generated a new "ubbconfig" for tuxedo which will help in maximising billing performance.
reason for this is in recent times i have observed that memory usage has increased .so this "ubb" contains maximum billing servers & rest minimum.if you have any idea on this,pls let me know.
your suggestions & corrections are welcome.
Thanks & Regards
Abhijeet K

Some follow up questions:
- How did you migrate (dsmig ldif or binary import)
- Did the accounts in .x have any custom password policies set?
For a "new" and a migrated entry, can you check if a passwordpolicysubentry is configured?
(search as directory manager and fetch the attribute)

Scheduled job not getting executed on a logical standby

Hello,
We have created a job(through dbms_scheduler API). The job is enabled and shows up in the SCHEDULERJOBS view also.
However the job does not get executed. I looked into the following tables there was no relevant entry found for the aforesaid job:
select * from all_scheduler_job_log
select * from dba_scheduler_running_jobs
select * from DBA_SCHEDULER_JOB_RUN_DETAILS order by log_date desc
Is there any limitation that we cannot execute scheduled jobs on a logical standby database. If i execute the relevant program (that is configured to be run as job in this scenario) as an individual procedure from SQL plus, it gets executed successfully implying there is no errors/problem in the subprogram that the job is going to invoke.
Appreciate your thoughts in this regard.
Thanks.

Hi Justin,
Thanks for your response.
As per the app design, the job invokes a stored program(that maps to a stored procedure present in standby db itself) that reads the data from standby and populates the relevant tables/entities in another database(third db, not primary or standby) which acts as a repository. No write operations are to be performed on standby.
So, i have two doubts:
-- Can scheduled jobs execute on logical standby db[Oracle release 10g(R2)]
I was going through few of the oracle docs and it is mentioned that this is a known limitation in 10g
R2 release and has been corrected in 11g. Now we have something called database_role
attribute that needs to be set to 'LOGICAL STANDBY' if you need to execute a job on
standby. However it is available in 11g onwards.
-- If there is no workaround for the above mentioned problem in 10g-R2 release.
Then we may have to schedule a job from third db instance that shall invoke the program(residing on the standby db). Can we have a scheduled job which executes a program that maps to a remote stored procedure instead of local stored procedure?
Appreciate your thoughts.
Thanks

Work Item Not Getting Executed

Similar Messages

Maybe you are looking for