Work items creating for GoodsMovement IDOCS

Hi Friends,
We have IDOC to File and File to IDOC scenario, we are able to post GRN files  into SAP successfully, but for some idocs , work items are creating  for some line items where there is error . After analysis we have come to know that there is some error in article or price is missing.
what i would like to know is instead of creating idoc for some items success and some with work items ,can we restrict if there is error in any line item.
for example:
let us say if i have one  GRN file with 10 line items.when i post this File into SAP .. It post 7 items as success and for 3 items it creates workitems.
1) Is there anyway i can restrict the entire idoc , instead of posting 7 items once and after re-processing 3 items in second one.?
2) how to avoid creating work items?
one more thing I have created a backgrounduser for PI while posting to SAP. Some articles are showing as article is locked by piuser.
can anyone suggest how to overcome this..
Regards,
Suman

Suman
What is the Message type / IDOC type your are using? You should be able to create one single IDOC with multiple line items instead of one IDOC for each item, provided the header information for the material document is the same for all the line items. In most cases this is possible.
Check your mapping in XI and see if you can club all the items in one single IDOC. Doing so will also prevent the material locked issue. But, point to note with this design is that you will be penalizing good records in your file just because one line item was in error.
KK

Similar Messages

  • Change in Work item Text for Approval Workflow WS14000133

    Hi,
    I need to change the work item text for Shopping Cart Approval Workflow WS14000133.
    I have created an Attribute in Business Object BUS2121 and called the same attribute in work item text.
    In PFTC -> Redefine Work item text - > and i have defined the work item text as well called the attribute from the container.
    what  the problem over here is - when I am passing the attribute in the work item text in the task, I am unable to see the work item text with the Dynamic Attribute but I am able to see the work item alone (not with the Dynamic attribut)
    But when i debug the workflow from SWI1 then i can see the dynamic attribute in the Container of the workflow but nt in the approver's inbox in portal..
    Can you please tell me - that why is this a strange behaviour that i can see the Dynamic attributed created initially in the workflow container of the Business Object but nt in the Approvers inbox either in Backend nor in the front end...
    Thanks,

    Hi,
    Maybe this SAP note/KBA will help :
    1470761 - How to change the text of the SRM approval links in inbox or UWL
    Kind regards,
    Siobhan

  • Work item display for step : Deadline Missed

    Hi,
    Parked invoices for one of the vendor is not triggering the work item in the workflow inbox.
    But the status is showing as complete. Appreciate if provide guidance how to analyse the issue.
    The message is read as below:
    Deadline Missed: Invoice# 5106117758 PO# 4567819 Vendor# 10300 
    Work item display for step " Deadline Missed: Invoice# 5106117758 PO# 4567819 V " called...
    Message no. WL223
    Thank you

    Hello,
    "i looked in SWI1 to see who processed it. But it is not showing any parituclar agent name. "
    Maybe nobody has process it, which is why it went overdue and passed the deadline.
    If it's a dialog task and it's completed then there must be an agent attached to it.
    Look in the workflow builder to see how the deadline is set up for that step. It could be that it just issues a notification.
    regards
    Rick Bakker
    hanabi technology

  • How to indentified work orders created for an trasfered asset in EAM

    Dear All,
    We have a businees requriment, where we need to list of workorders created for an asset which has been transfered from one EAM org to another EAM org.
    Business case :
    1.We have an asset BX3003 in WSB (eAM org), i have performed move asset transaction from maintenance super user to transfer this asset to other eAM org (GSW) and created a workorder in this org.
    2.Now we get this work order in to a custom report called work order created for transfered assets
    Can any one help us on this issue.
    Thanks a lot
    Praveen

    Hi,
    Yes, you can generate active calls into the future. First ensure that you have set a scheduling period in each relevant maintenance plan. This determines how far into the future you want calls to be generated. Also make sure the completion requiremment flag is not set.
    The calls can be generated via IP30 (or schedule with RISTRA20). Make sure the interval for call object is set to a sufficient length of time. This has the same function as the scheduling period in the plan. However the lower of these two values will be effective. To ensure the calls are not set on hold - set the immediate start for all flag. This setting will ensure the calls are scheduled and orders generated.
    -Paul
    Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics   (I am moving the thread)

  • Invoice Workflow : Dialog work item created

    Hi,
    I am not fully aware of workflow but can manage to check the logs and status.
    My question is: My Invoice workflow status is 'READY' but i dont know how to find to whom the work item it currently held.
    When i check the log it says:
    WF-BATCH                       Dialog work item created
    How can i check, which approver currently held work item so that i can chase them to approve the item.
    There are no agents assigned to the workflow and it is General Task.
    I would apprecaite if you could share me some information about this.
    Thanks,
    Macs.

    Hi,
    About Invoice Workflow :
    WS10400016 – Without approval,
    WS10400017 – One-step approval,
    WS10400018 – Two-step approval,
    WS10400021 – Administrator approval
    The relevant approval workflow is started, depending on completion status, invoice category (credit memo or invoice), creator role, and total value of the invoice.
    You should have maintained approver in your org structure (PPOMA_BBP)
    Please have a look at  :
    http://help.sap.com/saphelp_srm50/helpdata/en/58/c14e3c59bfe747e10000000a11402f/frameset.htm
    Kind regards,
    Yann

  • SSRS Report for Incidents/Work Items Created or Closed over time

    I'm curious if anyone has developed a custom report based off the DWDataMart that displays the count for creation of incidents or other work items over time or work items that are closed over time.

    Hi Jon,
    There is a blog, which talks about in detail regarding SCSM reporting,
    http://scug.be/scsm/2012/04/10/working-with-scsm-reporting/
    However related to your queries please refer to this,
    http://blogs.technet.com/b/servicemanager/archive/2010/04/23/how-to-create-a-custom-report-and-display-it-in-the-console.aspx
    Thanks,
    Mohammad.
    -Zakir, Let us know if the answer/post helps you :)

  • How can I specify an area path for the work item created on build failure?

    In our department we are working with multiple build definitions for different parts of one Team project. We heavily use the Team Project feature. Teams are defined by area path nodes, so each team can only see it's area path. No one (except the admins)
    can see the root project node.
    When a build breaks, TFS generates a Bug. Unfortunately, this bug is assigned to the area path root node, so nobody can see the generated bug and act on it.
    We would prefer to specify the area path for the generated work item in the build definition (not template, but property of a build definition), as every build belongs exclusively to one team.
    I have found that you can populate fields of the generated work item by filling the "custom fields" of the "create work item" activity. But how do I set the area path as a parameter?
    Guenter

    Hi Cuenter, 
    Thanks for your post.
    You should set the value like below in that activity:
    New
    Dictionary(Of
    String,
    String)
    From {{"Area
    Path",
    "teamprojectname\areaname"}}
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Delete credit memo work item created in VA01 when the user change value

    Hi,
    In T.code VA01 Credit memo request is creating, this document will automatically create  work item.  Based on Net value in credit memo request, the work item should go for 5 levels of approval. After 1st person is approved, the workflow initiator realized that the net value in created Credit Memo request is wrong; he is going to VA02 and correcting the net value. Again we have to create new work item for this and delete the already created work item. Client has clearly mentioned when ever there is change in 5 critical fields in VA02 then only create fresh work item otherwise no need to create SECOND TIME work item. Net value is one of the critical field in the list.
    How to track already created credit memo request and how to delete the previously created work item. What is the feasibility of this requirement and how to handle this situation?
    Regards
    Vijay

    Hi,
    Just put a Fork and put 1 out of 2 outcomes and in the first alternative, you put your witem that goes to user B. In the 2nd alternative, put a Wait for event "CHANGED". And after this, put a process control step with "Set workitems to Obsolete" or "Cancel workflow" etc., depending on your requirement.
    Pl note that this will only take out old witems, but you need to send a new witem for which you need to trigger another instance of the workflow as well. pl put CHANGED event also as one of the triggering events and use condition editor to restrict the fields that triggers the workflow.
    Also, look into the IMG config of the following path. This might be a fitting solution.
    In SPRO, go to Financial Accounting (New)---> Financial Accounting Global settings(New) -
    >Tools --->Workflow ---> Workflow for Document Parking -->Reset Release Approvals(Customers).
    Here, you can list down the fields, the workflow should restart. But, then you need to give the workflow details etc., in the relevant config settings.
    We have used this in restarting workflows for General Ledger(GL) documents' workflow when some important fields are changed.
    For this config settings, look into the following help link.
    http://help.sap.com/erp2005_ehp_02/helpdata/en/01/a9cdd8455711d182b40000e829fbfe/frameset.htm
    Hope this helps.
    venu

  • No work item found for workflow WS14000109 Urgent

    Hi,
    I am using Extended classic scenario, I have created a PO in SRM having a PO value of 100000 INR and the work flow which is triggered is WS14000109 i.e. spending limit worlflow.
    My approval limit is 25000 INR and I have three approver
    Approver A has approval limit 50000 INR
    Approver B has approval limit 75000 INR
    Approver C has approval limit 12500 INR
    Now the problem is that the PO has the status " Awaiting Approval" and when I checked the PO in transaction BBP_PD, I got the  message that no work item is found for all the three approver.
    I am not able to understand why the workitem is not being sent to appover A and later on to B and C
    Please help me out as this is really urgent
    Regards,
    Yatendra

    Hi Yetendra,
    You approval workflow task should be a general task.
    Make it a general task and you will work items flying around.
    Please reward few points if you feel this answer is helpful.
    Regards
    Pras Durafe

  • Finding Work Item IDs for a particular Container Value

    Hi All,
    I am trying to find a workflow that ran on 9/3/09.  What is easiest way to find the particular workflow ID if I only have a container value to tie to the workflow?  Is there a WF table or transaction that I can use to search for work items on a particular day with a specific container value?
    Thank you for your help,
    Brian

    Hi,
    If you know the value of key elemnt of your BOR then you can use SWI6 tcode.
    Here you have to enter the object name, object key, slection variant as All instances and selection period as All.
    Example : my object is BUS2012 and iknow the object key : 4500002345 then in SWI6 you will definitely get it.
    Thnaks and Regards,
    Swaminathan

  • SC in Awaiting Approval but no work item found for SC

    Hi
    We are in SRM 5.5 Extended Classic Scenario will item-based approval workflow for SC.
    A requestor has created a SC which requires several steps of approval.
    The shopping cart has status 'awaiting approval' but when we check via BBP_PD system gives 'No workflow item found .
    Why this occurs is already strange we have lots of SC every day and workflow item is created properly.
    But 2nd question is if there is a solution available to retrigger / restart the workflow for this SC ?
    Any help would be appreciated

    Hi,
      did you check in SWI6 or SWIA?
    Saravanan
    Edited by: Saravanan Dharmaraj on Nov 30, 2011 1:57 PM

  • How does it work Item Conditions for a PO

    I need to retrieve the correct price of a material in an agreement, depending of the validity period. I noticed that, clicking in the button: Item Condition I obtain the right ammount.
    I also noted that the value that I need is KONP-KBETR, but I need to know how to move from table EKPO to this table KONP (How are they linked - fields - )
    TIA

    I think the best way for you is to put a break-point in 'pricing' and then use ME32 (I think) to change the contract. Go to the condition screen and add an entry, this will force the flow through the fm, I hope. Then you'll be able to see the parameter values that get passed into 'pricing' and can try to simulate that in your own program.
    Also, you could run ME32 in SE30 and have a look at the db tables being used. That might tell you where the conditions are held.
    If you have no joy with the contract transaction try and do the same thing with ME22N instead to see how pricing should be used.

  • Creating Work Flow Item for inbound Idocs

    Hi experts,
    I'm just trying to create a work item in sap inbox when inbound idoc fails and gets the status 51 .Documentation says no need for any extra setup,it works with standard SAP tasks & Idoc system process codes which are all preconfigured.
    I'm assiginig a user id in the partner profile.I do get a work item when there is syntax error in the inbound idoc segments(like wrong sequence of segments...), but not when idoc fails,due to idoc errors.Am i missing something.Users want a workitem when it fails,so they can reprocee/edit etc.Please help.
    Thanks in advance,
    Rajj

    Thanks for the response.I know this task and i could see a event triggered in the event log,but no work item created in my inbox.What should i do to get the work item in my inbox.should i change this task or assign this to some thing else.
    Thanks,
    Rajj

  • Is it possible to create a Visual Studio plugin that can copy TFS work item ID by adding a context menu in the work item UI?

    Our team is using VS2013 and TFS 2013, and in our daily work we often open a TFS query, then we need to open a work item, and we often need to copy the ID, for example, to the email.
    But currently the field is read only, and we often manually copy it.
    So is there any convenient way to solve this? Any built in ways?
    If no, is it possible to create such a plugin?
    Regards,
    Lei Yang
    from Motorolasolutions

    Hi Lei Yang
    You can try the following work around to copy work item ID
    for VS 2013:
    Right click on work item tab header in VS 2013 and click 'Copy Full Path' from context menu
    When you paste it on notepad/email you will get work item ID at the end of the path:
    http://sumiran-dev:8080/tfs/web/wi.aspx?pcguid=d855bc22-69a8-45a5-b6fc-25f096ade8f5&id=46
    For Web Portal:
    Right click on work item link at top and click 'Copy shortcut' from the context menu
    When you paste it on notepad/email you will get work item ID at the end of the shortcut:
    http://sumiran-dev:8080/tfs/DefaultCollection/TFS%20Scrum%20Demo/_workitems/edit/46
    Thanks
    Sumiran

  • RBBP_OFFLINE_EVAL No e-mails exist for execution of work items

    Hi ,
    We are trying to implement SRM offline approval. The system is able to send the email to the approvers, but when they click on approve, the work item does not get updated.
    When i try to run report RBBP_OFFLINE_EVAL it says that No e-mails exist for execution of work items. No Work Item Found for Processing. What do i need to check to resolve this. If I approve thru SRM, it is working.
    Thanks,
    Jograd

    Hi
    refer related links too
    SRM : Offline approval process
    Offline approval not working?
    Check WF-BATCH user id has email ID?
    regards
    Muthu
    Edited by: muthuraman on Aug 18, 2008 8:00 AM

Maybe you are looking for