Work load in system for the spool task

Dear  Friends,
I find that the work load in system for the spool task is showing 12785
Avg resp time in ms as on today . Normally also it remains in thousand
itself . Kindly suggest how can I make this in better response time.
Thanks & Best Regards,
Atul K

Hi Authul
I think at that point of time may be more number of user may be requested for resources through spool  process ,why dont you increase the spool work process any try to evalutate the same situation
regards
George

Similar Messages

  • What is the best 'cleaning system' for the Mac?

    What do you recommend as the best 'cleaning system' for the Mac!

    How to maintain a Mac
    Make two or more backups of all your files
    One backup is not enough to be safe. A copy of a backup doesn't count as another backup; all backups must be made directly from the original data.
    Keep at least one backup off site at all times in case of disaster. Backing up to a cloud-data service is one way to accomplish this, but don't rely exclusively on such backups.
    In fact, don’t rely exclusively on any single backup method, such as Time Machine.
    If you get an indication that a backup has failed, don't ignore it.
    Keep your software up to date
    In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
    Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Don't install such modifications unless they're absolutely necessary. Remove them when they are no longer needed. Before installing any Apple update, you must check that all system modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of difficulties with system updates.
    Don't install crapware
    ...such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
    It's not much of an exaggeration to say that the whole "utility" software industry for the Mac is a fraud on consumers. The most extreme examples are the "CleanMyMac," "TuneUpMyMac," and “MacKeeper” scams, but there are many others.
    As a rule, you should avoid software that changes the way other software works. Plugins for Photoshop and similar programs are an obvious exception to this rule. Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
    Only install software that is useful to you, not (as you imagine) to the computer. For example, a word processor is useful for writing. A video editor is useful for making movies. A game is useful for fun. But a "cache cleaner" isn't useful for anything. You didn't buy a computer so you could clean caches.
    Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve. Do not rely on "utilities" such as "AppCleaner" and the like that purport to remove software.
    Don't install bad, conflicting, or unnecessary fonts
    Whenever you install new fonts, use the validation feature of the built-in Font Book application to make sure the fonts aren't defective and don't conflict with each other or with others that you already have. See the built-in help and this support article for instructions.
    Deactivate or remove fonts that you don't really need to speed up application launching.
    Avoid malware
    "Malware" is malicious software that circulates on the Internet. This kind of attack on OS X was once so rare that it was hardly a concern, but it's now increasingly common and dangerous.
    There is some built-in protection against malware, but you can’t rely on it—the attackers are always at least one day ahead of the defense. You can’t rely on third-party "anti-virus" products for protection either. What you can rely on is common-sense awareness—not paranoia, which only makes you more vulnerable.
    Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.
    In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
    Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
    Don't fill up your disk or SSD
    A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a startup failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.
    While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
    If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.
    Relax, don’t do it
    Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
    To use a Mac effectively, you have to free yourself from the Windows mindset that every computer needs regular downtime for maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform.
    A well-designed computing device is not something you should have to think about much. It should be an almost transparent medium through which you communicate, work, and play. If you want a machine that needs a lot of attention just to keep going, use a PC, or collect antique cars.
    The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

  • Error (Data mining): The specified mining structure does not contain a valid model for the current task.

    I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
    Actual(Service Description).SE value
    Actual([Service Description]).[SE value]
    Actual(Service Description)
    Actual([Service Description])
    just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
    Error (Data mining): The specified mining structure does not contain a valid model for the current task.
    the following is my mining model structure

    Association rules does not allow for cross-validation
    Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

  • Failed to load configuration file for the workflow

    There are two of us who have full control on our Sharepoint 2013 site. I'm able to create workflows and publish them fine. The other user is able to create workflows, but he gets an error when trying to run them. I  tried opening his workflow and got
    the error "Failed to load configuration file for the workflow."
    Any ideas?

    Hi Carltonw1,
    Based on your description, I recommend to verify the things below:
    Clear the SharePoint Designer cache and then open the workflow.
    Ask the user to open the workflow in SharePoint Designer and check if the workflow contains error.
    Ask the user to create the same workflow and associated with another list to see how it works.
    Check the ULS log for more detailed error message.
    To reproduce this issue, could you please provide the detailed steps in the workflow for further research?
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Operating system for the Blackberry Bold 9650?

    Is it possible to get the 7.0 operating system for the Blackberry Bold 9650?

    Sorry. 6.0 is the highest you can go on the 9650. You could load a hybrid OS that has 7.0 enhancements, but in the end it is still a 6.0 OS.

  • Users as other task owners are receiving 5 emails notification for the same task

    users as other task owners  are receiving 5 emails notification for the same task in Sharepoint 2010. I have tried to add a 5 minutes delay on the other task owners workflow with no luck.any suggestions? Thanks

    The Book confuses me. I still think assignment delay and leveling resources are the same. Here is the explanation from the book for the three concepts.
    " Project offers two types of delays:
    Leveling delay. This type of delay applies to tasks; it pushes out the start date for the task and all its resource assignments. It’s meant specifically for remov-ing resource overallocations. With the Leveling Delay field, you can remove
    all leveling delays by choosing Resource➝Level➝Clear Leveling.
    Assignment delay. This type of delay applies to a single assignment within a task. Suppose you have a security consultant coming in to help lock down your site. However, your employees have prep work to do before the consultant can get started.
    You can assign everyone to the same “Try hacking into office” task but delay the consultant’s assignment by 5 days. "
    After a couple of pages;
    " Leveling Resources
    In Project 2010, you can level the entire project, tasks you select, or a single resource. By leveling several tasks that are all vying for the resource, or alternatively, leveling only the most in-demand resources, you can focus on the problematic
    portions of your project. Project automatically chooses popular settings in the Resource Level-ing dialog box. In most situations, you might as well run Resource Leveling with these settings. You can undo the leveling if you don’t like the results, but you
    can get some clues from the initial results to help you determine the settings you need. Here’s how to level different parts of your project using the leveling settings cur-rently in place:
    Level a resource. Select the resource you want to level, and then choose Resource➝Level➝Level Resource"

  • How to create a custom task in SRM for the standard task

    Hi Gurus,
    How to create a custom task in SRM for the standard task  eg: TS10407929
    regards,
    George.

    from PFTC itself. Same.

  • Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this....

    Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server

    Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share,  as I am facing real problem because of this...

  • How can i add one field in the container for the standard task-90310004?

    Hi,
    Please let me know thw steps to add one field in the container for the standard task-90310004.
    Usefull suggestions will be rewarded.
    Regards,
    Neslin.

    <b>Hi,
    Containers are used for holding Application data for Workflow purposes.
    Event container
    Task container
    Workflow container
    Role container
    Binding is the linking of data from one container to the other for making data available all across the workflow.
    But you can get values from one container to another container like this
    Container(Con)
    1. WF Con to Role, Wf con to task con, Wf con to event
    and
    2. Event con to wf con, task con to wof con
    and
    3. Method con to task con
    and
    4. Task con to method con
    So, we don't have direct possible binding from task con to task con.
    Thanks and Regards,
    Prabhakar Dharmala</b>
    Message was edited by:
            Prabhakar Dharmala
        But you can do pass values from first task con to wf con and again from wf con to another task con

  • The DataSource ZGLOBAL_SPND still has no target system for the delta update

    Dear Experts,
    I have created a Generic Datasource, while checking records in rsa3 iam getting below error.
    Error: The DataSource ZGLOBAL_SPND still has no target system for the delta update.
    Source system is already created.
    For some of the datasources iam getting this msg.
    regards
    KV

    Hi,
    Fisrst did u enabled the Delta for Generic.If yes, the in RSA3 select Update Mode as "D" then provide the BI Trget system and execute.
    If you correct Target system and update mode D then it should fetch Delta records only...If not please write to SAP about this issue.
    Regards
    Ram.

  • NQSError: 15001 Could not load navigation space for the subject area

    Hi gems,
    I am creating repository with some subject areas from one of the Old repository which has no errors. New repository is giving error as
    nQSError: 15001 Could not load navigation space for the subject area
    nQSError: 15004 Internal Error: Missing Functional dependency association for the column
    But actual for particular column n OLD Repository it is not giving any error
    Can anyone help me why this is giving this error.
    Thanks
    Manu

    Hi Manu,
    Please check if all the columns in the copied subject areas are having links to BMM layer and physical layer columns. If the pulled tables does not have proper joins with other BMM tables, it also will cause load naviagtion error.
    While copying the subject area from another RPD you must have missed some objects or joins. Please verify.
    Thanks
    Krishna

  • Error in RSA3 - no target system for the delta update

    Hi friends,
    I have created one datasource but in RSA3 when i press F4 at target system it gives me msg like "The DataSource V_BW_DPP still has no target system for the delta update" what could be the reason? kindly help me.
    Regards
    Suyash

    Hi Suyash,
    First check whether the BW system is connected to R/3 or not by Right click on Source system in RSA1 and selecting the option Check.
    Also What is the update mode you have chosen in RSA3?. Is it full ( F ) or Delta (D) . If you have chosen delta then you  check in RSA7 whether the data source V_BW_DPP is appearing or not . If it is not appearing in RSA7 do init upload in BW system for the data source and then check in RSA3.
    Regards,
    Prakash

  • Registration of Business system for the Integration Engine Java in the SLD issue

    Hi,
    We have completed the installation of PI-AEX 7.4 SR1 then we ran the below wizards successfully.
    - Configuration Wizard: PI-AEX initial setup
    - Configuration Wizard: PI Self Test for AEX
    However when we were Checking the AEX Configuration as per help.sap.com
    Check the registration of a business system for the Integration Engine Java in the SLD:
        Enter https://<host>:<port>/sld .
        Choose Start of the navigation path Business System Next navigation step Integration Engine Java <SID> Next navigation step Integration End of the navigation path.
        The pipeline URL must be: http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet?ximessage=true .
    More information: SAP Note 1435392
    for us the Pipeline URL is as below
    http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
    and the rest " ?ximessage=true "  is not there.
    Also we ran the below wizard
    Configuration Wizard: PI Self Test for AEX
    and it finished successfully without any issue.
    Any Suggestions what could be missing.
    Thanks,
    Regard
    Ahmed Mohammed

    Hi,
    I found the below SAPNOTE which confirms that the Pipeline URL should be
    http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
    1564449 - PI CTC Wrong Pipeline Url after AEX Initial Setup
    However on help.sap.com it is different.
    Any one experienced the same ?
    Regards
    Ahmed Mohammed

  • Information needed on having one more CEN system for the monitored systems

    Hi Everyone,
    I need some information regarding configuring of one more CEN system
    system for the systems which are already being monitored by another
    central system.
    1) Do I need to register a new CCMS agent on the monitored system for the NEW CEN system again. As I already have sapccm4x registered in the monitored system for the old CEN system, which i think can't be used for the new CEN system.
    If I can go with configuring NEW CEN system for the same monitored systems, can you tell me how should I proceed.
    Can anyone help me by providing the information for this issue.
    Regards,
    Bharath Kumar.K

    1) yes you can use DSL with what you have, but you want more RAM and I would recommend getting OSX.3 or above because the web browsers for OS9, which I assume is what you are running, are a bit dated and not well supported any longer.
    2) Yes you can add more RAM. The 64meg stick in there can be removed. You can add up to 1 Gig of RAM via two 512Mb PC100 or PC133 DIMMS.
    See here: http://tinyurl.com/qdlo3
    I would add at least 512 Mb if you use OSX and no less than 256 mb if you are using OS9
    3) No you can not use CD-R or CDRW with the hardware you have. That iMac only has a CDRom drive and can not burn CDs. You can buy an external CD burner if you want to back up to CDRs
    PS: You may want to remove your serial number from your post. Granted the warranty has expired but there's no need or reason to list it.

  • Unable to reset sample for the equipment task list.

    Unable to reset sample for the equipment task list. Example: Equipment task list has been created on 01.10.2007 & inspection lot is created on 10.12.2007 which requires the changed in the inspection characteristics

    Hi Sandeep,
    You may change the Inspection charecterstucs and save the Task List.
    After that u have to reassign that task list to the Lot. for that Trasaction code is QAC3 give the lot no. and enter
    , without doing anything save it. now go to QA02 and reassign the task list and sampling procedure. and save it.
    Now u may do RR as per ur new charecterstics.
    Regards,
    Neeraj Bhadauria

Maybe you are looking for