Work Order Field Selection after Release

Hello,
Can anybody help me in configuring Field Selection.
We are creating Work Order or Service PO.
We are entering Services in Short Discription Bcoz Service master is not used.
We want to make this field in Display after completely release.
We are using Release Indicator 3 i.e Changable. for final release.
Is there any way that we can change Field selection?

Hi,
I am afraid that this setting will prevent change in any field from taking place after full release.  It is not applicable to only service line item's short text description.
Cheers,
HT

Similar Messages

  • Disabling selected Purchase Order field(s) after released/approved

    Hi Experts,
    I have a requirement to disable specific Purchase Order fields after released via ME29N.
    For example, in Purchase Requisition - I can "Release Indicator - Field Selection Key" to control Purchase Requisition screen layout. However, for Purchase Order - the configuration for "Release Indicator" consist only standard default "Chgable" options.
    Question:
    Is there a way to customize the Purchase Order "Release Indicator" for screen layout based on customer requirements other that using the default as mentioned above?
    Thank you.
    Steven

    Hi Padmasri,
    I understand your explanation on the standard SAP behavior.
    Nevertheless, I'm looking for some flexibility to meet customer requirement. Like in Purchase Requisition, there is option to further customize the screen layout by linking it to the "Release Indicator".
    Therefore, apart from the standard 6 options given by standard SAP, can we add/customize the options? For example, my customer may one to change a field in the Purchase Order even after released.
    Thank you.
    Steven

  • Reference Object to Refresh Work Order Field Data

    Dear Gurus,
    In IW21/IW22 the reference object will populate the Responsibilities section of the Notification tab, and fields on the Location Data tab.  When the reference object is changed, those same fields will update or refresh.  The reference object will also populate field data in a work order if the work order is created from the notification, however, work order fields will not refresh if the reference object on the notification is changed.  Nor will work order fields change if the reference object is changed directly within the work order.
    Can anyone explain why fields will refresh in IW21/IW22 when the reference object is changed, but similar fields in the work order will not refresh when the reference object is changed in IW31/IW32?

    Hi Lisa,
    When you execute IW31/IW32 transaction, in back ground standard SAP programs are called to perform order related task.
    When transaction IW21 / IW22 is executed and order is created or changed at that point also standard SAP programs are called to perform order related task.
    But program called by IW31/IW32 are different then that will called with IW21/IW22 and thus refresh dont happen if u change reference object in notification once after order is created.
    You need to manually change in work order.

  • Work Order field define and display in Operation TAB

    I have a question about the user field define in work order's operation:
    I define the user field in the standard IMG for operation's Enhancemen use. but the field can only display in the operation's details' Enhancemen Screen. 
    What I want is the User field can display in the Operation list screen.
    BTW:what does the Equipment numnber in Operation TAB 's   meaning
    thanks  a lot

    Duplicated [here|Work Order field define and display in Operation TAB;

  • Purchase order field selection.

    Dear All,
    I have one query.
    The filed selection for purchase order can be done only for some specific purchase organisations.
    When I do field selection this field should reflect only for some specific purchase organisations.
    Thanks in advance.
    With Rgds,
    Babu

    the field selection key is assigned to Document type.
    First create diff a Field selection key with the field combinations at
    Spro > MM > Purchasing > Purchase order > Define screen layout ,
    Then you nedd to create Many Document types as per your Requirement and then assign Field selection key for the doc type
    Then Use BADI ME_PROCESS_PO_CUST and allow different Pur org & Doc types

  • Work Order printer selection through dialog still picking default printer

    Hi,
      When i'm printing Work Order (trx: IW32) programs picks up default printer assigned to the user.
    in my case this also happening when user selects different printer though dilog.
    was trying to get it from NAST-LDEST but in my case NAST is empty and ITCPO pointing to LP01(Local Printer of user).
    can anyone please help how to get printer name which is selected by user.
    Thanks in advance,
    Kian

    Hi,
    Below code show you the way to assign any printer to form. (Pls find the code in you print prog )
    DATA: output_options        TYPE ssfcompop.
    DATA: control_parameters TYPE ssfctrlop.
      output_options-tdimmed       = 'X'.
      output_options-tddest         =  'PR01'. --- > here we can hard code the printer name and pass to FM
      control_parameters-no_dialog = 'X'. 
    CALL FUNCTION fm_name
        EXPORTING
          control_parameters = control_parameters
          output_options       = output_options
          user_settings        = ''
          nota_fiscal            = i_nota_fis
        EXCEPTIONS
          formatting_error   = 1
          internal_error       = 2
          send_error           = 3
          user_canceled     = 4
          OTHERS               = 5.
      IF sy-subrc <> 0.
      ENDIF.
    As you need to know form where the value of output_options-tddest is coming then you can debug the flow and try to find the value of output_options-tddest ...
    Pls tell me if you need to know anything else.
    Regs,
    Lokesh.

  • Can you post GR to Work order without it being released??

    HI, Currently if a work order in PM hasn't been safety checked and released no GR can be applied.  Ihave looked at all our setting and can not find anything that would suggest I can change the settings to allow GR even though teh WO hasn't been released.
    Can you please advise??
    thanks
    helen

    I did understand what you were asking. I was talking about linking the movie to the netstream variable/object. The problem is as you stated at the bottom. The server doesn't like when I use an FLV file. I don't think it particularly cares if I useany other format, but it doesn't like the reference to the flv. It sees both files individually, but when the swf tries to connect to the flv, either through the flvplayback or the netstream, it sees the swf as an MP4 container. Since I can't control the movie without coding the AS3 for the Movie load in the first frame, the swf is trying to load/link to the movie from the start. Do you know anything about how it would work if I changed over to silverlight? I love flash, but if this place doesn't allow the video to work, I need to change to a video format that does work.

  • PR Field change after release completion

    Hi,
    We have a PR release strategy with Doc type and $ as 2 charesterestics. I have assigned X - Block and 2- RFQ/purchase order as release Indicators. 2 - has FZ01 and "Blank" as changeabil.
    The question is, User want to lock "Cost Center" field in accoun assignment tab. Or they want to reverse release strategy in case of "Cost Center" change.
    There is no field in FZ01 to control.(We does not have any WorkFlow)
    Any idea will be appreciated.
    Thanks in advance,
    Vamsi.

    Hi
    Create a release indicator with the released for PO, RFQ checked and changeability as 1=cannot be changed and assign it to ur release strategy after rlease.
    If u want a new release strategy after costcenter change then cost centre should be one of the characteristics it the release strategy.
    The first option would be the best one for you.
    Check and revert
    Reg
    Raja

  • Work Order Release related issue in PM

    Hi Experts,
    I am using the WorkOrderRelease template in BLS to release the work order in PM.After creating transaction in BLS , I created Query Template for the same.
    Now In both BLS as well as in Query template its working fine.
    But when i am trying to create the Display template for the same, i am not able to retrieve column names from OutputXML file automatically once query template is selected .
    Please guide me.
    Saumil

    Hi Jamie,
    ya i also know that it returns only one coulmn ' Message ' as output but thats the only field which will tell the status of releasing action like whether my Order is released or it is  already been previously released or there are some other errors. So because of this i need to display that column for which i am not able to create the display template.
    Please suggest.
    Thanks & Regards
    Saumil

  • Work Order Release Approval workflow

    Hi All,
    I am trying to setup Work Order Release Approval workflow. I have set its AME using supervisory level as the action type. When I tried set work order status, I had to set the department as I set department attribute as its AME condition, and work order status changed into Release - Pending and form become disable.
    Where can the supervisor make his/her approval to relese the pending status?
    I tried the Maintenance Super User page, but it can only review.
    Any help is greatly apprecaited.
    Thank you,
    Iqbal

    HI
    Please post EBS release version da and platform details
    1001759 wrote:
    Hi All,
    I am trying to setup Work Order Release Approval workflow. I have set its AME using supervisory level as the action type. When I tried set work order status, I had to set the department as I set department attribute as its AME condition, and work order status changed into Release - Pending and form become disable.
    Where can the supervisor make his/her approval to relese the pending status?
    I tried the Maintenance Super User page, but it can only review.please see if this helps you
    follow this navigation
    1. eAM
    2. Work Orders > Query for existing unreleased work order.
    3. Release it & submit for approval.
    4. Approve the WO.
    ;) AppsMAsti ;)
    Sharing IS Caring

  • How can I make settlement rule mandatory in create work order (IW31)

    How can I make settlement rule mandatory in create workorder and saving without release.
    I kanow we can make settlement rule mandatory upon Release order but here requirement is
    Create work order (IW21) save without releasing that time settlement rule should default.

    Hi,
    1.If you want the settlement rule default then maintain account assignment data in technical object and when MO is created on that it would be copied into the settlement rule...
    2. If you want to make those fields mandatory .... plz check up field selections in config , if you cannot find those then use SHD0 Transaction variant to make those fields mandatory.
    3. Enter SHD0 , Enter IW31 in transaction and ZIW31 for transaction variant ..click create option and this takes you to IW31 initial screen , here enter required values of technical object etc and press enter and this gives you IW31 Initial scree screen variant , click continue and this takes you to inside screen and here enter required field values and on pressing enter gives you screen variant .. so you need to enter field values and check the flow of screen variants and on getting settlement rule screen variant select required option for the fields you need.
    4. Finally you can save that in package created in SE80 for transporting to other client .., you can activate the variant in SHD0 -->Standard variants -->you can find activate option ..
    regrds
    pushpa

  • Service Entry field selection

    Hi Experts,
    In Service Entry sheet, we need one particular field to be editable after final release also.
    I tried the options with field selection in External Service Mgmt for u201Crelease indicator Ex: Bu201D. But none of the settings make the field editable after release.
    Is there any other control/settings required?
    Thanks in advance for your help.
    Regards,
    AMV

    Hi,
    Don't go  for changes to standard SAP settings.Better make screen exits through SHD0.
    Thanks & regards,
    Bijay Pradhan

  • How to create Work Order in CMRO

    Dear All,
    We are new to using Oracle CMRO and because of unavailability of CMRO resources, we are facing quite a few problems while working on CMRO. Can anyone please help me out how can I create Work Order using CMRO.
    If anyone can provide me with Oracle CMRO White Papers, I will be very thankful.
    Regards,
    Zulfiqar Ali Mughal

    Hi,
    There are 3 ways to create work order in oracle cMRO.
    1) Through Maintenance Requirement and associated to visit and push to production.
    2) Non-routine.
    3) Unassociated Task.
    1.     Create Work Order From Maintenance Requirement:- In order create work order first of all we need to define an MR in Engineering > Fleet Maintenance Program > Overview > Create. After creating the MR Header at least one route should be associated (Route can be created from Engineering > Route >Overview > Create and the status should be "complete"). Then MR effectivity (means which item or unit MR is applicable) need to be defined and in turn the interval threshold also need to define. Once the MR is completed from the Planning window associate the MR to a visit and push to Production. In case of Planned MRs run the Build Unit Effectivities and view the due date from the Planning> Unit Maintenance Plan screen and associate to a Visit in Planning and push the visit to production. In case of Unplanned MRs create visit, associate unplanned MR, push to production.Work Orders would have generated and visible in Execution >Production Planning > Work Orders.
    2.     Create Non-Routine:- Non- Routines can be created from Execution and Planning
    a.Create Non-Routine work order from Execution:- Select the Routine work order and select Create Non-Routine work order from the pull down menu, furnish the details like severity, urgency, summary etc. and click on (B) Apply.
    b.Non-Routine from Planning: Create NR from Planning >Unit Maintenance Plan> Non-Routines (B)Create and then associate to a visit and push to production.
    3.     Unassociated Task:-This is for executing the miscellaneous operations to be done as part of already created visit. Navigate the visit task screen in an already created visit (Navigation: Planning > Visit Work Package > Overview > Search the visit > Click on the visit hyperlink> view visit task in side Menu), From the drop down menu select the “ Create Unassociated Task” and click (B) Go. Furnish the details in the Task header and click on (B) Apply and (B) Cancel, you would be navigate back to the “Visit Task” Screen. Select the unassociated task and push to production. Unassociated work orders would have created. You can create Unassociated task any time during the execution, before closing of visit.

  • Agentry - Main Row Selection After Transmit

    What is the best way to maintain the currently selected row in a list screen after a transmit?  The list screen data is reloaded during the transmit so the selected row is lost.

    Christopher,
    I would recommend you look at implementing an exchange model so that you don't reload all your data each transmit.  Without understanding your application more, typically a transaction would not remove an object only to have it re-added during the fetch.  If the data is intended to stay on the device you should look at leaving it until the user is done with the data and then have it removed.
    For example, in the products if the user has a work order (WO) selected and performs a transaction against the WO and then transmits the WO is not removed first as part of the transaction and then re-fetched again later.
    If that is a requirement the only though is to store the id of the object to a main object property prior to the transmit and use a navigation step and list selection to try an reselect the row following the transmit.  Without knowing more about your application I can't say for sure if it will work or not.
    --Bill

  • Using a hierarchy but also showing work orders that are not in hierarchy

    good morning bi people,
    i have a requirement to show data from a hierarchy which includes Operation and Maintenance information. for example it has an account broken into labour/material/trucking and below this is the pm acivity type and secondary cost element (concatenated). this hierarchy is a manually created hierarchy that is uploaded to BW and is not in ECC. The users do not want to see the concatenated field at the end of the hierarchy, but instead, want to see the Work Orders that have the PM activity types.
    At the present time, we have the report using the hierarchy but we need the work orders to replace the pm activity type/secondary cost element concatenated field. the work order field is a free characteristic and when we drag in the work order in analyzer, it works correctly.
    1) is this possible to use the hierarchy and somehow map the work order field to the end of the hierarchy within crystal?
    2) do you have a suggestion to change the hierarchy, without being a manual nightmare?
    all conversations are welcome.
    Erik

    Good Day Ingo,
    i have created a word document with screen shots of the hierarchy from BW, a screen shot of the BEx showing the free characteristic of Maintenance Order and a screen shot of the crystal report with the PM Activity type concatenated to the Cost Element. Once again, we do not wish to see the concatenated field, but rather see the Maintenance orders that have a PM Activity type the same as the concatenated field. 
    here is the link.
    https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B1j5hXTptfntYWI1MDUzNGEtY2MxNy00YmMzLWJjZjEtZDA4OGZiYmMyNzFh&hl=en&authkey=CKq4xcgJ
    thanks Ingo,
    Erik

Maybe you are looking for