Work Order Header Short Text & Operation Short Text Issue

Hi All,
There is one issue while creating the work Order through IW31. When I put the Header Short Text same short text is transpose in to the First Operation short text as per STD SAP behaviour but if I change First Operation short text in creation(IW31) and save and come back in IW32 or IW33 it is showing the same Header Short Text but not changed one.
Why it is so???
I Want to Edit the First Operation short text in IW31 only not in IW32.
If anybody have explaination on this please let me know.Its SAP BUG????
I am Using ECC6.0
BR
Rakesh

Hello Pete,
No i don't want same short text at Operation short text. Actually when i am in TC IW31 creating Order By default Header Short text is transfer to Operation Short text as per SAP STD functionality when at the same time i change the Operation short text and save and come back and see the Order in IW33 & IW32 i am not able see the changed Operation short text which i changed at IW31 while creation of order.It showing the same short text of order Header .Why so.......????
BR
Rakesh

Similar Messages

Work order header information from BAPI_ALM_ORDERHEAD_GET_LIST

Upfront I'll admit that this question likely falls outside of MII as I am getting bad results in SE37 as well. Was hoping others in this group have experience with this.
When I use BAPI_ALM_ORDERHEAD_GET_LIST there are several work orders that do not get returned, and I can't figure out why, or even what is the common thread between them. The missing orders are viewable via iw33, and information can also be returned from BAPI_ALM_ORDER_GET_DETAIL.
Right now, the only thing I pass in OPTIONS_FOR_ORDERID with a range of orders (ie 20 or so). Orders are returned in the correct range, just not the one I am looking for.
Rod

Hi Rod,
The only thing I can think of is that there are times where orders (or other objects) are created outside of normal procedures. My experience was with Batch histories, but if the objects are not created in the normal process (a nebulous term at best), they will sometimes not be stored in all the proper tables. Can you check the processing history of the orders missing to see if there are any discrepancies there?
Otherwise, you may need to get some ECC side help. The ABAP code in the underlying function module may direct you to all the tables which should be populated with the correct data so you can check which tables are not populated.
An alternative option for getting the work order header information would be to go back to the old reliable RFC_READ_TABLE.
Good luck,
Mike
Edited by: Michael Appleby on Feb 12, 2011 4:13 PM

Difference between Order Header BSD and operation schedule SSD

Hi,
One of your Client is operating on SAP 4.7
There are some cases where Order Header Basic Start Date and operation Schedule Date are no same.
example:
Present Order Basic Start Date 24.06.2011
Present Order Basic Finish Date 01.07.2011
Forward Schedled order.
Operation 1
Operation 2
Work Center has sufficient capacity and is available to perform work 24hrs.
Using planning board CM10 user dispatches operation 1 to 30.06.2011 and operation 2 to 01.07.2011.
The problem is order basic start date is remaining same i.e. 24.06.2011 and not chaning to 30.06.2011.
Can any one please help in this issue.

yes for all order types and also i have observed that most of work order has basic start date as 24.06.2011 when all the operations of orders are scheduled in future dates (date other than 24.06.2011).
The first time scheduling of work order operation is done on 24.06.2011 (CM10) and then after re-scheduling (through IW38) of operation changed the schedule start date but work ordre basic start date remained same i.e 24.06.2011.
Dispite of first time scheduling and then re-scheduling basic start date remained 24.06.2011.
Note: Same profile was selected in both CM10 and IW38 while accessing planning board.

Single work order to release 2 operation from Task list 1 month and 6 month

Hello,
We have a maintenance plan for an equipment. It has a task list with 2 operation: Operation 0010 is 1 month interval and Operation 0020 is 6 month intervals.
Currently when the preventive maintenance plan is release, 2 work order are created for every 6 months.
Is it possible to combine the One month interval and 6 month interval task to a single Work Order?
Thanks.

For 1 month freq, orders will be created every month. In 6th month, order will be created with one month & 6th month operation together.
If you want to suppress one month operation while order is getting created with 6th month operation, mention higher hierarchy for 6 month freq in strategy. This means, mention hierarchy 1 for 1 month freq & 2 for 6 months freq. While both the operations are due, operation with higher hierarchy only will be taken over to the order.
I guess, this what you expect. Please confirm.

Unable to upload PM Work Order Header Status

Hi,
I have made LSMW for tcode: IW31. I have a requirement to upload legacy data to SAP with their existing header status.
For instance:
I have a work order which got a header status complete and I want to upload this work order with its status. So, how can I upload different work orders with their different header status.
Do let me know as soon as possible.
Thanks for the contribution.
Regards,
Yahya

Yes, you are right. Originally it should be the way you answered but requirement is to upload data with respect to their order status from legacy.
In addition, is there any possiblity that I can create one complete LSMW for transaction IW31 OR IW32?
This is asked because I am unable to upload data in Operatoins Tab
Thanks.
Regards,
Yahya

How to update TEXT in Sales order header

Hello ,
I have requirement in which I am creating SO via IDOC calling BAPI_SALESORDER_CREATEFROMDAT2.
Question: Can any one help me in finding a solution to update the TEXT in sales order header which is confogured IN TEXT CONTROL in SD.
I have tried various option using CREATE_TEXT but it is only updating STXH table , the text is not coming in the sales order.
If someone knows about this , <removed by moderator>.
Edited by: Thomas Zloch on Nov 15, 2010 4:20 PM - please do assign priorities > normal

Sounds like a text determination config issue - have you assigned the text in VOTXN? Have you run the text determination analysis from VA02 in the document?

When Creating a Work Order Import Standard Operations

A client is requesting the following functionality when creating a Work Order: Create the first nine operations with different work centers and number operations 0001 u2013 0009. For operation ten continue numbering with 0010 and increase by 10, ie, 0020, 0030, etcu2026 . And operation 0010 would default header data.
Can this be accomplished through standards configuration or would this entail a user exit?
Thanks in advance!!
JAM

It can be possible, depending on how you create the Work Order. If these operations are used often and are in a task list, you can create a work order and import the task list operations by using the menu "extras -> task List selections" inside the work order. If it is part of a preventative maintenance plan, you can configure that your task list is automatically copied to the notification/work order when generated by your maintenance plan. Of course in the task list you could save all the increments and work centers as you want. But this would never be a dynamic check to your header data, it would only be as accurate as your task list.

PM work order estimate cost

I wanted to ask regarding "Estimated cost of work order"
Ponit 1- In Transaction IW32 (change work order) change the Estimated Cost field so that it does not u201Cgrey outu201D after the work order has been released. This field is available for data entry while the work order is in the CRTD status but cannot be accessed once the Work Orders changes to REL status.--is it possible to change the estimated cost after Work order released
Point2 - If ponit 1 is not possible, an alternative is to have the planned cost of the work order auto fill the estimated cost field if no value is entered when the release flag is executed. (that means can we take planned cost as estimated cost automatically if estimated cost field is blank)
our clints want these two functionality. please any body know on thes issues let me know.
thanks in advance for your help

Prakash,
Estimated cost field in work order is free text field
In work order header tab cost field, you can make mandatory setting via OIAN for all order types
Thanks
S.Naresh

Goods return against maintenance work order exceeds goods issue

Is there a way to prevent returning more quantity (262 movement type done within MB1A) than was issued (261 movement type done within MIGO_GI) against a maintenance work order component?
Thanks in advance,
Rick

Hi,
Movement Types 261 and 262 works in Planned as well as in Unplanned both ways.
If you do Goods Issue w.r.t. Maintenance/Work Order (Movement Type - 261) then components and their quantity get defaulted from the reservation created automatically during order creation and system does not allow us to issue more that the quantity in reservation.
Similarly when you cancel the Goods Issue Document then it hits Movement Type 262 automatically and does not allow to edit the quantity.
The above two processes are planned ways.
Now when you want to do extra consumption of components against Maintenance/Work Order then you do not do Goods Issue > Order, instead of this you do Goods Issue > Others and then specify all the necessary details manually (Like; material, quantity, etc...) and enter Maintenance/Work Order as an Account Assignment on which the cost is getting loaded.
Similarly when you are receiving materials from Maintenance/Work Order using option Goods Receipt > Others then here also there is no control and you can receive any quantity from Maintenance/Work Order since here also Maintenance/Work Order is working as an account assignment not a control document.
The above two processes are unplanned ways.
So in short, there is not any control on this movement when it is unplanned.

Displaying Work Order System and User Statuses in IW37 Search

I'd like to display the work order header system and user statuses along with the operation system and user statuses in an IW37 search but couldn't find an entry as such in the IW37 'change layout' dialog box.
David Macindoe

David Macindoe,
That Order header information isn't available in IW37 report.You may have to use IW37N report or enhance /copy IW37 report to get this information.
Regards
Narasimhan

Purchase reqisition header note not copying to Purchase order header Note

Hi
can you help me any body regarding this issue
"purchase reqisition HEADER NOTE not copying to Purchase order HEADER NOTE " .
it is very urgent issue for me please.
Thanks
Madhu.

hi madhu
ans1.) in ECC 6 it is not possible to copy PR text to PO text , becouse the only way to convert PR into PO is document flow and document flow will show you only line items.
ans 2 ) PR text is used for maintaining text related to PR genration information , like which MRP run is giving this PR or other information which user wants to maintain .
ans3.) if user have done same thing earliar then it may possible that he was using 4.7 or ECC 5 .
let me konw what user is saying .
regards
ravikant dewangan

ERROR TECO a Plant Maintenance Work Order

Hi Expert,
I create a Plant maintenance work order. With two operation.
Operation 1: Internal maintenance task with standard labor hour. Control Key is PM01.
Operation 2 : Trigger of external PR. With control key PM02.
Now I want to do TECO to settle the Work Order. Whit operation 1 didn't do confirmation. Operation 2 did not do PR next business. The system display a Error message as below:
'ERROR When calculating costs for order XXXX'
How to do analysis?

Hi
in the work order itself from the menu options Extras>Log>Cost determination . and solve the analysis
regards
thyagarajan

How is functional location linked with work order tables

Hi, Experts:
I am working on a BW project to extract Plant Maintenance data from R/3 to BW system. We need to get work order data with related Functional Location data togather. When check the 2 tables AFIH for Work Order header and AUKF for Order master data, I don't see Functional Location field in neither of the 2 tables.
Can anyone please tell me how (by which table/field) Functional Location data in table IFLOT is linked to a Work Order stored in tables AFIH and AUKF?
Many Thanks,
Jenny

Hi, Thyagarajan:
Thanks for the reply! I tried to get the values of ILOAN from table AFIH. And pass the value to the field ILOAN in ITOB. However, no data returned from ITOB. The ILOAN in AFIH has different set of values from the ILOAN in ITOB.
Any suggestions?
Thanks,
Jenny

Create Work Order Using BAPI in LSMW

Hi All,
I searched in SCN but i dint get the correct idea to create Work Order USING BAPI,
Im trying to create Work Order Using BAPI in LSWM
Can any one Give me Brief Idea to create Work Order(Either Component or Operations) (t code - IW31) using BAPI in LSMW
Regards
Smitha

Hi All,
I searched in SCN but i dint get the correct idea to create Work Order USING BAPI,
Im trying to create Work Order Using BAPI in LSWM
Can any one Give me Brief Idea to create Work Order(Either Component or Operations) (t code - IW31) using BAPI in LSMW
Regards
Smitha

Work Order related Question

Hello, I want to know which table or FM can be used to get plan cost for a work order (Header level) in IW33 > Cost > Plan Cost. Please let me know.
Thanks.

Dear,
Go to table PMCO you will get the values.
Regards,
Pardhu

Work Order Header Short Text & Operation Short Text Issue

Similar Messages

Maybe you are looking for