Work order user and system ststus

Hi all,
In plant maintenance work order(iw31) system and user status have to display as a report. I want to know table and
field name for that below status. Please guide me.
CRTD - created
PAPL -
PLAN - planned
APP - approved
REL - realeased
TECO - Technically completed
CLSD - closed
thanks & regards
R. Saravanan

Dear rajendransara ,
along the above post, TJ02T  for System Status Text and TJ30T for User Status Text.
Also JEST to know the all the status of the order.
Regards
Sunil
Edited by: sunil gupta on Mar 18, 2010 12:10 PM

Similar Messages

  • BAPI/FM Help Needed for PM Work Order Update and Notification create

    Hi,
    I am using BAPI - BAPI_ALM_ORDER_MAINTAIN to update the work order details and create notifications for the object list but i am getting errors in doing that.
    IWO_BAPI 203 -Changing the execution factor in the BAPI is not supported
    And i have to create notifications to each object in the object list. This BAPI is not supporting that.
    So i used another BAPI BAPI_ALM_NOTIF_CREATE to create notification and passed the order number , counter etc to it but in the order it is creating a new row for that equipment and linking the notification to it.
    Need some help on these.

    Dear
    1. If you want a Notification mandatory to be created for Order using IW31 you can once make this happen by User Status in Order ,   i would suggest if you are doing implementation better Use Order Types  which has got Notification integrated in it .
    Check Order type PM05 in Ideas server you have PM05 Order with notification fields integrated , which created notification in Background when order is Created or released.
    2.For Work Order B --> Notification A , Not Allowing I donot have any idea check whether is there any User exit from experts or ask ur Abaper
    Regards,
    Edited by: Srinivas Narayana Gowda on Jun 11, 2009 1:10 PM

  • Posibilities of user and system status?

    Hi CRM experts,
    I've some doubts respect the user and system status configuration.
    My client wants to stop the upload process (to R3 site) of a Sales Order document, regarding a specific user status. Then, they want to restore the uploading process regarding into a specific user status different from the firts one.
    User Status -             System Status
    Status 1 -                Stop uploading process
    Status 2 -                Restore the uploading process
    I made the following customizing in my status profile (assigned to my Sales Order transaction)
    User Status -  Transaction Control -  Forbidden -  Set
    Status 1 -     To be distributed -    X -           X
    Status 2 -     empty -           empty -           empty
    When I save a Sales Order in Status 1, the BDOC is correctly generated and the document is not present in R3 environment. The problem occurs when I modify the Status, from Status 1 to Status 2. The document is in R3 environment (???) but the generated BDOC remains in Yellow light.
    Is correct to implement this uploading behaviour regarding a user status like my configuration? May I implement some checks on the upload BADI better?
    I need some help in these questions please.
    Thanks in advance

    Hi,
    It might be easier if you could come to a scenario were one specific user status should trigger the distribution. Then you have a direct link between a user status & a system status, meaning that there is no need for additional coding.
    If the bdoc remains in intermediate state, then that means there's an error in the queues or a short dump. check transactions smq1 & smq2 and ST22 in both systems.
    Michael.

  • 1.     Defining dependencies between Work order operations and Isolation Operation Steps

    Hi All
    Will you please let me know how i can define dependencies between Work order operations and
    Isolation Operation Steps? Suppoose I want to have WAP--->WCA-->WCD at operation level, is it possible? Can we have the Switching of Status & allowing that perticular operation for releads. e.g. I have operation 1 in Maintenance WO Which needs machine where only operational control panel to be Locked & tagged. No Need to Tag total machine. So once i complete complete the taging for it & once give permits for it, system should permits only that much operation. Not all operation which may have some other permits which needs to be issued.
    Regards
    Makarand      

    Hi All
    Will you please let me know how i can define dependencies between Work order operations and
    Isolation Operation Steps? Suppoose I want to have WAP--->WCA-->WCD at operation level, is it possible? Can we have the Switching of Status & allowing that perticular operation for releads. e.g. I have operation 1 in Maintenance WO Which needs machine where only operational control panel to be Locked & tagged. No Need to Tag total machine. So once i complete complete the taging for it & once give permits for it, system should permits only that much operation. Not all operation which may have some other permits which needs to be issued.
    Regards
    Makarand      

  • Function module for changing Work order user status in IW32

    Hi,
    I want to change the work order user status in IW32 using ABAP.
    Is there any function module to do so or any other way? I have tried using BDC but this does not work.
    Please suggest.
    Regards,
    Naba
    Edited by: n. saha on Nov 5, 2008 6:46 AM

    I am getting Same Problem.
    fi_methods-method = 'SAVE'.
    APPEND fi_methods.
    fi_methods-refnumber = 1.
    fi_methods-objecttype = 'USERSTATUS'.
    fi_methods-method = 'CHANGE'.
    fi_methods-objectkey = '002000002453'.
    APPEND fi_methods.
    fi_userstatus-user_st_text = 'COMM'.
    fi_userstatus-user_langu   = 'EN'.
    fi_userstatus-CHANGE_EVENT = ' 01 '.
    APPEND fi_userstatus.
    CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
      TABLES
        it_methods    = fi_methods
        it_userstatus = fi_userstatus
        return        = fi_return.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    Above code I am using and there the message comes like
    T ID                   NUM           MESSAGE
    S IW                   080           Order saved with number 2000002453
    S IWO_BAPI2     110           BAPI control was ended
    can any on know what is wrong in this? please help if having knowledge.
    Thank You,
    Jahnavee Trivedi

  • Open Work Order report and shortage report

    Hello,
    First of all, I am very new to SAP and sap forum. I do need to learn SAP very fast. I work as Buyer and Planner. I would like to know how do you run open work order report and also how do run shortage report.
    I appreciate different feedback.
    Thanks
    Raj

    Hi,
    Use tcodes CO24. First you need to activate that report PPCOXPR1 in SE38 enter report name and execute
    In COOIS select list components you can be requirement qty and withdrawn qty , here you can find out open work orders also
    Thanks
    Diwakar

  • Different between work order closed and completed

    HI experts
    I would like to know what is different between closed work order and completed on SAP PM Module.
    regards
    nasser

    See this conversation:Completed is technical comptete (TECO) - the technician has done his/her work, closed is settled and done also from an accounting perspective (settlement)
    PM Work Order TECO and CLSD
    http://scn.sap.com/thread/3158261

  • Activity Monitor % User and % System do not add up

    Looking at my iMac i7 Activity Monitor/ All Processes/ CPU I find that the % User and % System do not add up to showing the correct % Idle.
    For example, a recent screenshot shows % user = 0.81, the % System = 0.41 and % idle shows 61.25. The CPU usage graph show nothing going on and the Process Name list shows nothing unusual.
    This constantly changes - sometimes the figures add up to 100% but usually the % Idle can be anywhere from 40% to a correct 98 - 99% based on nothing of any consequence running.
    I look at the Activity Monitor on my MacBook and % Idle shows correct addition and a constant 98 - 99%.
    What is going on?
    Thank you.

    This afternoon, it will be an entire week without a crash on my Squeezebox system!
    Totally removing Intego VirusBarrier X6 from my main computer (iMac i7) finally lets me enjoy my music again.
    The main problem is that X6 does not provide feedback as to what it is doing so the user cannot adjust the settings. In other words, no specific message as to what X6 just prevented.
    As a crash can occur anywhere from 10 minutes to 8 hours of play time, hit or miss setting adjustments waste an amazing amount of time. This has been going on for a year with the frequency of crashes escalating.
    I had already entered all my music devices on the Trusted List and had set up rules for all the ports that Squeezebox uses. Still crashed.
    There is no reason why Logitech and/or Intego engineers cannot provide security setup instructions. Unfortunately, Logitech only shows security help for PCs.
    Well the nightmare is over. Amazing what free time I now have.
    The next three paragraphs are for Squeezebox owners and may be of some help if you are having problems:
    A crash (for me) is defined in many ways. The worst crash is when the Squeezebox device shuts off and only pulling the electric plug will revive it. Another crash shows itself when the next song only plays for about 1 second and goes to the next song endlessly until the device shuts off. The Logitech manual says move the device closer to the wireless point when this happens but if they are connected by ethernet cables, this advice is useless. Another crash is when three units are synced and one of them suddenly is no longer in sync and playing a different song.
    Crashes can occur when units are in sync or not in sync. Connected wirelessly or by ethernet. And when a crash occurs, the loud 'crunching' noise that occurs is not kind to the speakers.
    BTW, if some devices are in sync, make sure these devices are connected the same way - either all wirelessly or all by ethernet. If you don't, you will experience sound lags of about 1/2 second. A very annoying echo effect.

  • SAP user licensing - service users and system users

    Hello,
    In SAP licensing process, will it count service users and system users for the license.
    (or licensing occurs only to the dialog users)
    In the license agreement , it is not mentioned.
    (Mentioned as 500 user license only)
    regards,
    zerandib.

    Hi Zerandib,
    This forum is for SAP Business One users only. I think your question is related to R/3. Please close your thread and post on a proper forum.
    Thanks,
    Gordon

  • Material Availability check during work order creation and Release

    Hello All,
    We are checking material availability at creation as well as release
    Say we have Material XYZ=100 in stock MMBE
    Now XYZ =100 is say at normal storage location =75
    and scrap storage location=05 and serviceable =20
    Currently when availability check is performed it checks for 95 (It excludes scrap storage location 05 )
    but we want  Availability check to be only for normal stock =75 and not for Serviceable and Scrap location
    how to do this in configuration or via exits
    Since if the material is under Scrap location it is not counting in Availability check at work order creation this logic is working fine but I do know from where this control is put that when the material is in the stock of scrap it is not counting in Availability check for work orders.Same thing I want to extend it to Serviceable stock .
    Why not it is consider it for Scrap storage location , what is config or any MM enhancement
    So that when Availability check run it will not consider Materials at SCRAP as well as SERVISABLE storage location also.
    Please have your views on this
    Regards
    pratap

    Hello
    There are two option for your requiement
    1. Changing the status of the servisable storage location stock to restricted use stock . You can include or exclude this stock status material in OPJJ. This solution is not storage location dependent. It is stock status dependent.
    2. Please refer the enhancement for the storage location determination. I am not sure about this funtionality:
    For production orders the following enhancement is available:
    PPCO0005 enhancement for storage loc. determination/backflushing
    You can use this enhancement to change the storage location and the indicator 'backflushing' in the reservation.
    The enhancement PPCO0005 contains the following enhancement components:
    Function exit
    EXIT_SAPLCOSD_001 storage location determination/backflushing
    You can find the description in modification text of the function exit.
    You can find an example of the user exit in the function group XC01 in the include LXCO1F05.
    warm regards
    Ramakrishna

  • Can not synchronize the SAP NW UME users and system groups with SSM

    We have created a demo enviroment for a client demo.
    In SAP NW UME:
    1. Create the system group.
    2. Asing the goup created to the admin user (pipadmin).
    In Administrator's user interface:
    3. Acces to Administration > Set System Defaults in order to synchronize user tables. The data informed in the fields are:
    SSM Administrator = pipadmin
    Cache directory = C:Program FilesSAPSSMInternetPubcache
    Global cache setting = Enable
    End point = <IP:port>
    User name = pipadmin
    pasword = ······
    cache = Enable
    Then we click on syncronize tables (Administration > Set System Defaults). The "Update compled" message is showed but users and application group don't appear in the Administration > Manages Application Groups.
    Note: We tried to syncronize yesterday and we recieved the message: restart the SSM Extended listener.

    Thank you for your answer Bob.
    Yes, I restarted the SSM Extended listener after all the steps.
    Do you know if there is another missing step?
    Regards,
    Santiago

  • Work order component and PR details

    Hi Friends,
    Through ME5A i can retreive components and Purchase requesition details aganist Work orders,however this has not been working for TECO and CLSD Work order,is there any way to get those detials for TECO & CLSD WO from standard report.
    Regards,
    Srinika

    Srinika
    Have you tried selecting the Closed Requisitions checkbox??
    PeteA

  • I am unable to save a service work order designated and configured as MRS work order

    Every time I try to create a SM work order, and save it, I get the following message"
    Error in the ABAP Application Program
        The current ABAP program "/MRSS/SAPLRSG_PM_ORDER" had to be terminat
         it has
        come across a statement that unfortunately cannot be executed.
        In include "/MRSS/LRSG_PMCS_APPSCHEDF02 ", in line 93 of
    "/MRSS/SAPLRSG_PMCS_APPSCHED             ", the following syntax er
        have occurred:
        The row type of the table "G_APPOINTMENT_LIST" is not compatible wit
        field symbol type "<APPOINTMENT_LIST>".
        Author and last person to change the include are:
        Author         SAP
        Last changed by "SAP         "
    Any help or advise that would allow me to successfully create the work order and then open the planning board to view both the demand and the resources? I would appreciate any help. Thanks

    Hi Hussein,
    I found a SAP note 2030049 that is relevant to the problem: http://service.sap.com/sap/support/notes/2030049
    But when attempting to implement the note, it showed a syntax error.
    Will likely log this with SAP for resolution.
    Regards, Warren

  • Can I embed C# Email code in .pdf file to send user and system information when it opens on system

    I have a pdf on my system. When I opened it it should email the current  user account and system information( like IP, Windows login Id).  If the system does not have internet it should not show the error.
    Is it possible? If so could you suggest a way or provide a link.
    Due to security we want this feature.
    Your help is appreciated.
    Thanks

    You could track the user's email login/IP address if you secure the file using DRM (LiveCycle, etc.), but a PDF which sends silent emails containing personal data about a user would be considered a trojan by the vast majority of people.

  • User and System Info

    Hi All,
    How can I find the following information for a SRM System?
    Number of Users and Types
    Average online response time
    Thanks,
    Gamad

    Hi All,
    Thanks for the information.
    What transaction can help me find the number of Shopping Cart and other transactions in SRM for a particular period.
    Thanks,
    Nikhil
    Edited by: Gamad on Aug 21, 2008 6:01 AM

Maybe you are looking for