Work place required to execute the work

Hi, can we able to map the work place required to execute certain work in sap? we want to calculate the cost of the product by multiplying the area with the standard rate of that area. please suggest.

Hi Yadavji,
Yes, we can certainly map the work place required to execute certain work in sap.
This workplace is nothing but it is Workcenter. Use CR01 t.code to create Work center in SAP.
Yes, we also calculate the cost of the product by multiplying the area with the standard rate of that area.
Since area is critical to business scenario, you can area as one of standard parameter in Standard Value key. Can make an activity type for this and maintain the rates in KP26. In that way, you can calculate the cost also.
Thanks,
Srini

Similar Messages

  • "Workflow Template Create" screen  appears while executing the work item.

    Hi,
       I am learning the workflow. I have created a test workflow in which there is a user decision step and 2 mail sending steps for the outcomes of the user decision.The workflow is activated properly . When I excute the workflow the screen for "Workflow Template Create" opens everytime. When I go to the Business workpkace a mail is there in my inbox with the title as given in the user decision step. Again when i am trying to execute the work item in the inbox again the same screen for "Workflow Template create " is opening. I am totaly confused with this problem . Pls suggest what might be the reason..?

    I think the Wflow Template Creation screen is not opening but your current session is getting closed so the previous session which is Wflow Create one which you have already opened is appearing. Please check your template design and act accordingly.
    Thanks
    Arghadip

  • Generating the RM requirement based on the work order?

    Does Oracle Disceret MFG has the provision of generating the RM requirement based on the work order?

    Hi,
    If you mean RM requisition as Material indent from Stores , then Yes, Component Pick Slip is the form
    Regards
    S

  • Event linkage deactivated after executing the work flow

    Hi Experts,
    We are facing a problem in the production with Event linkage activation.After Event linkage was activated (ENABLED = u2018Xu2019 in the table SWFDEVENA) and if we execute the workflow then again this linkage is deactivated(Enabled value is cleared).if we activate the linkage and execute the work flow again after work flow exectution event linkage will be deactivated.Could you please  give the solution if any one face this issue.
    Thanks and Regards,
    venkat

    Hi Rickk baker,
    Thanks for your answer.Now my issue was resoved .This is because of some mandatory work flow container parameter value is missed in the programme.This was traced throgh event trace(swel and swels)
    Thanks and Regards,
    Venkat Marisetti

  • SharePoint Foundation Sandboxed Code Service - Unable to activate worker process proxy object within the worker process

    Issue:
    On a vanilla installation, the sandboxed code service (e.g. SPUCHostService.exe) is started; however, SPUCWorkerProcessProxy.exe and subsequently SPUCWorkerProcess.exe fails to start.
    Resolution/Workarounds attempted:
    Attempted 2 different Load balancing settings – local and remote (i.e. affinity)
    Ensured local computer policy on server for ‘RPC Endpoint Mapper Client Authentication’ and ‘Restrictions for Unauthenticated RPC clients’ is disabled.
    Ensured following key in registry is set properly - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\RPC
    Attempted to bypass SharePoint’s check for certificate revocations at crl.microsoft.com
    Ensured the service account is added to the respective groups (e.g. Performance Log Users, Performance Monitor Users, IIS_IUSRS, WSS_ADMIN_WPG, WSS_WPG)
    Increased limit of ‘AbnormalProcessTerminationCount’ of SPUserCodeService via Powershell
    We have tried all possible workarounds from the following MSDN reference:
    http://blogs.msdn.com/b/sharepointdev/archive/2011/02/08/error-the-sandboxed-code-execution-request-was-refused-because-the-sandboxed-code-host-service-was-too-busy-to-handle-the-request.aspx
    ULS:
    02/21/2014 05:24:50.64  SPUCHostService.exe (0x0230)  0x0F74  SharePoint Foundation Sandboxed Code Service              fe8a               
    Medium               -  - Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000  
    02/21/2014 05:24:50.64  SPUCHostService.exe (0x0230)  0x0F74  SharePoint Foundation Sandboxed Code Service              fe8c               
    Medium               -  - Error activating the worker process manager instance within the worker process. - Inner Exception: System.InvalidOperationException: Unable to activate worker
    process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()    
    02/21/2014 05:24:50.64  SPUCHostService.exe (0x0230)  0x0F74  SharePoint Foundation Sandboxed Code Service              ei0t               
    Medium               - Process creation/initialization threw an exception. Stopping this process. "ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000"
    02/21/2014 05:24:50.65  SPUCHostService.exe (0x0230)  0x0F74  SharePoint Foundation Sandboxed Code Service             
    fe87                Medium               -  - Error activating the worker process manager instance within
    the worker process. - Starting worker process threw - Inner Exception: System.InvalidOperationException: Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()   
    Any other insights on how I can troubleshoot the issue described?
    Thanks in advance!

    Hi ,
    For resolving your issue , you can do as the followings:
    1. Logged into the Web Server with the Timer Service Account.
    2. Ran the powershell command to check the SID of the account running the spucworkerprocessproxy.exe:  
    $(Get-SPManagedAccount -Identity "THE SERVICE ACCOUNT").Sid.Value
    3. Checked the registry :
    HKEY_USERS\[SID OF THE SERVICE ACCOUNT]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State
    4. Changed the value 0x00023c00 to 0x00023e00
    In addition, here are some similar posts for you to take a look at:
    http://social.technet.microsoft.com/Forums/en-US/aae497df-5f0d-4f86-a724-c7b805ccd07f/sharepoint-sandboxed-code-service-troubles?forum=sharepointgeneralprevious
    http://blogs.technet.com/b/operationsguy/archive/2011/01/17/sharepoint-2010-sandboxed-code-solutions-and-web-proxy.aspx
    http://social.msdn.microsoft.com/Forums/en-US/c21e2c3a-a259-4d5f-8071-eff52b7bddc3/issue-sandbox-solution-too-busy-to-handle-the-request?forum=sharepointgeneralprevious
    I hope this helps.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Workflow loop, return the work item to the inbox, instead of automatically executing the work item

    Hello all,
    Within a workflow I have a loop. Inside that a foreground step is executed. Then a condition step is executed to decide if the workflow should continue, stop, or return the work item to the inbox.
    This new workflow was modeled after an existing workflow that is doing just that. Unfortunately, this new workflow is not returning the work item to the inbox. Instead, it just keeps displaying the screen that is called by the function module that is called by the business object method that is executed when the foreground task runs.
    I've included a Word document with further detail in a number of screen prints. Hopefully this is something that will experience workflow developer may have seen before and know how to correct.
    Unfortunately I have done very little workflow development and don't have a clue what might be causing this problem.
    Any help would be greatly appreciated.
    Bruce
    I could not attach a Word file, so I added 3 jpg files.  I would have added another 3, but it seems that posts are limited to 3 files.

    Hi Bruce,
    As per your design, If you are approving or returning, the workflow loops back to the step "Approver - stat key approve".
    Suppose you are one of the approver for this step ""Approver - stat key approve" and if you click on approve or return, then it will try to create a new workitem for "Approver - stat key approve" step.
    As you are one of the approver again, the window opens immediately instead of reaching the inbox of all other approvers.
    Include a dummy activity step in the "approve & return" condition outcome.
    Active the workflow & refresh the buffer SWU_OBUF.
    After this, when you click on return it will not open the same screen again. Instead it will be reaching all the approvers' SAP inbox.
    Thanks,
    Karthikeyan

  • Help required in executing the stored procedure and capturing the responce

    Hi,
    I have to execute a stored procedure in oracle database and if it successful then have to create a status IDOC.
    The stored procedure may throw an exception(it is not an out parameter), in such cases i should capture the exception as part of the response message and send this information while creating the status IDOC.
    i would like if the below is possible.
    As the stored procedure is not returning( this means if you execute the procedure manually it will display the result), will it be possible to capture the result which has the exception details?
    any direction to this will be highly appreciated.
    Many thanks.
    Regards,
    Rahul

    @Bhaskar,
    i need to execute the procedure by sending the input data from a file and capture the result after executing the procedure to create a status idoc
    im not sure how the provided links helps me here.
    i m not looking for any look ups. i would like to know is there any way that we can capture the result after executing the database procedure?
    Edited by: Rahul_10416 on Dec 5, 2011 10:07 PM

  • Mail notifications stop working and require a reboot to work again.

    Why do my mail notifications stop showing up on my iPhone 4s after a day or two? It usually works again after a reboot but then stops working again after a day or two? Very annoying. I have an iPad 2 as well, which is running iOS5 (like my iPhone 4s) and I don't have this notification problem like I do on my iPhone 4s. My mail is a converted MobileMe mail account that is now an iCloud account. Any help would be appreciated!
    Thanks,
    Scott

    stevejobsfan0123 wrote:
    Settings > Notifications > Mail, what does it say?
    Thanks for your reply! Mail notifications are turned on and I have it set to show the last 10 notifcations, I am using the banner and alert sounds.
    Like I said, it works but then after "a while" it stops working until I do a reboot... It is very consistent in this pattern.
    Also, I use the Twitter App (official one) and I have never gotten a notification even though I have Notifications turned on for Twitter too.
    Thanks,
    Scott

  • MSS PORTAL -  RUN TIME ERROR WHEN EXECUTING A WORK ITEM IN UWL

    Hi all,
    I've a requirement wherein I need to have a custom screen in place of 'standard user decision' task in the UWL of MSS portal. I've developed a custom screen with Approve and Reject buttons and it works fine if I execute the work item from SAP inbox whereas in portal (UWL), it gives a run time error stating,
    Portal Runtime Error
    An exception occurred while processing your request
    Exception id: 10:56_12/05/08_0020_509163550.
    I'm sure that this error is due to missing configuration between the dynpro and the Portal. All inputs in this regard will be of great help and will be valuable to me.
    Thanks in advance,
    Bharathi.

    Hi
    Looking at the error message I feel like there is something wrong in the task object and object method. You are using a class in the task make sure that class has the IF_WORKFLOW. Mak sure the task is enabled with synchronous task method check box.
    Regards
    Pavan

  • BDC is not working in when executing the program in background

    Hi gurus,
    I have a problem that in BDC is not working when i'm executing the upload program in background thru scheduling(SM36) , while it works fine when i execute directly with NO screen display mode

    Many transactions behave differently when executed in foreground and background. The fields on the screen may be different.
    In transaction SHBD when starting a recording there is a checkbox where you can select 'Simulate Background Mode'. If you do your recording using this option you will get the code suitable for background mode. If you do not select this option you will get a code for foreground mode.
    By compairing the two codes you will know the changes required for background mode.
    Hope this helps you

  • Urgent - How to get a pop up after executing a work item?

    Hi Gurus,
    I am working on a PO Approval workflow which is designed to approve multilevel POs depending upon its amount.
    Now the requirement is that I need to provide a pop up with list of second level approvers to the user immediately when the user executes the work item of first level approval in his/her SAP Inbox.
    Waiting for responses ASAP. Let me know if scenario needs to be clarified in more depth.

    Hi Shaurya
    You can create a method to send a second workitem to the agent with a list of agents for the second level, and pass the selection back to your workflow container.  Set the new task as "Advance with Dialog" and you should be fine.
    Alternately you could set your new method as a secondary method AFTER workitem execution call, but don't forget to check the result of the first approval so the popup is only involed if they have approved the first step.
    Regards

  • Error when executing a work item (cannot execute a method, biding problem?)

    Hello,
    I created a specific workflow, triggered by an event, from a class I also created.
    From this event, I get some data about a Document (CV01/02/03N...).
    The first step is a task which refer to a method (from the same class above).
    The binding Task <=> Method is the data about the Document and the Workflow ID.
    After I start the workflow, I execute the work item in SWI1, with a breakpoint in the method.
    I can't go in debug, and the work item is in error (in Workflow log) :
    - "Work item 000000590208: Object ZCL_SA3_WF_GED_RECL_FOURN method UPDATE_FID cannot be executed"
    - "EXECUTE_METHOD_OBJECT_SYNC : Dereferencing of the NULL reference".
    Note: The task is not in background processing, in the aim of debugging the source code.
    I did SWU_OBUF and quit/relog SAP.
    Do you have any ideas to solve this problem ?
    I think it's a biding problem, because I can' t even go in debug mode...
    Thanks.
    Regards
    (sap version: ECC 6.0)

    Hi
    Looking at the error message I feel like there is something wrong in the task object and object method. You are using a class in the task make sure that class has the IF_WORKFLOW. Mak sure the task is enabled with synchronous task method check box.
    Regards
    Pavan

  • How to destroy the worker thread

    My problem is I have a swing client which has 2 buttons, search and cancel. In search button I am creating a new worker thread which will be calling my EJBs method. Thus I have an event thread and a worker thread running. Now when I click cancel button I want to interrupt my worker thread and screen should enable the search button but what happens is when I click cancel button it still continues with the worker thread even though I am calling workerthread.interrupt() method and this results in showing the result of the EJB's method on the screen. how can I prevent the worker thread to stop executing the ejb's method and come back to normal mode.

    This application its a socket server, Im doing:
    main {
    Thread1 - createServer();
    Thread2 - createLogging();
    waitForServerShutDown();
    the createServer method must be placed in a thread, its must not blocks the application because createLogging(); must be executed just after the server was created and createLogging(); doesnt blocks the application then... I must block the main{} to keeps application running

  • How to use the url in the work item

    hi ,guys ,
       I have question in design the workflow, my scenario is as follows : I develop the workflow in the sap gui ,then integrate it into the portal using uwl . now i want add a link in the work item ,before approver excute the work item ,the approver can click the url to view the detail approval information ,and the system popup a web window which link to the pcui application . and someone advise me to maintain the href in the work item text ,but i have no iead on it ?can anybody give me some advices or sample material ?thanks in advance .
    Jialiang.Qiu

    Hi
    If we talking about adding an URL in the GUI workitem display you can proceed as follows:
    1. In the workitem text editor, change the editor to line editor (Goto -> Change editor)
    2. enter the tag /* (Usually used for comments) to the left
    3. enter the URL on the line as follows <a href=http://www.cnn.com> click here</a>
    Regards
    Morten Nielsen

  • Call Tcode S_alr_87013560 with input values when  execute the workitem

    hi all
    My requirment is to call report S_alr_87013560 with value in input fields ,when user execute the work item .
    this report needs input 1 - controlling area
    on next screen--- 2- Database profile .
    then project ID  and cost...
    and this is the first activity of workflow definition.
    Please advice me on the same.
    Thanks in advance.
    Deepanker Dwivedi

    Hello,
    Put whatever you need to do in a method of the BO associated with the workflow,
    and then create a task (TS....) that calls that method. Then the step in the
    workflow calls that task.
    To call a report as you describe I'd guess you'd need to do a SUBMIT with BDC data.
    regards
    Rick Bakker
    Hanabi Technology

Maybe you are looking for