Work Porcess Trace level - 2 - Any little penalty on Performnace due to it?

Hello......Experts
We normally observe , Incidentally on some application server, some one work process Trace level is switched to "2" which in turn shows "YELLOW" in SM50.
Q1 - When this automatic Trace level is increased  of a Work Process ?
Q2 - When work process Trace level increased, some extra logging will take place...Will it create any little penalty ( negotiable) on over all application server performance ?
Rgds
PR

Hi PR,
Q1) The trace level should not increase automatically for a long time. When some processes crashes, the trace is increased automatically just to log this error and then is switched back to 1 (this should not take more than 1 or 2 seconds). There is also a known issue described in note 1515602 where the traces increase automatically.
Q2) It could have some impact as the system will be constantly recording data on the OS level, you could have some performance degradation due to excessive I/O and also some penalty about disk space.
Cheers,
Maurício

Similar Messages

  • Work process trace level automatically increasing

    Hello All,
    MY env is SAP R3 4.6C (DB2 7.1.0) ,and suddenly many of the work process of all the appl.servers(4) trace level is increasing to level 2 . Which is causing FileSystem full (usr/sap/<sid>) ...
    Even after manually changing the trace level to 1 , after some time it automatically changing to level 2.
    Can some one help me to fix this issue .
    Best Regards
    Rakesh

    Dear,
    Please look into the foloowing link this will be very helpful for you for solution.
    http://help.sap.com/saphelp_nw04/helpdata/en/8c/20213c16fd7c70e10000000a11405a/content.htm
    warm regards
    Mohammed Hassan Naveed.

  • Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?

    Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • Trace Level X activated after SAPGUI patch upgrade

    Greetings,
    After upgrading SAPGUI 6.40 from patch level 7 to patch level 14, many of our users are getting a dialog box appearing after the Portal auto launches the SAPGUI:
    SAPGUI 640 (header)
    Environment information:  working directory:'.'
    Trace level 3 activated
    Logging activated
    For maximum data security, delete the setting(s) as soon as possible!
    We've tried the following fixes to no avail: emptying the temp files in working directory, reinstalling the update, checking the GUI options to make sure that the SAPGUI trace level is not turned on.
    Any suggestions are greatly appreicated.
    Regards,
    Dan Kuhlmann
    [email protected]

    Hi John,
    Thank you very much for 'patching' my trouble.
    I have another trouble with SAP shortcut - "Working Dir".
    SAP GUI do not use this setting for tracing from shortcut.
    Probably, you could 'patch' this trouble also?
    P.S. I'd like to award you with points but do not know how.
    -- Sam

  • How to make operation Average work on base level of a hierarchy?

    I used Oracle OLAP 11g Sample Schema OLAPTRAIN to make a test, and found something really confused me a lot.
    Here was my steps,
    I made a dimension "TIME" with a hierarchy "calendar": all years <- year <- quarter <- month.
    And then building up two cubes,
    Cube "AVG_TEST" using dimension "TIME" with operator Average.
    Cube "SUM_TEST" using dimension "TIME" with operator Sum.
    After maintaining both dimension and cubes, I tried to query views: AVG_TEST_VIEW and SUM_TEST_VIEW and noticed the cube value based on months level were same for both of cubes. It was pretty clear that operator Average didn't work at month level within cube "AVG_TEST", but using operator Sum.
    Could any one tell me why operator didn't work on the base level of hierarchy, instead of Sum? As I have a requirement to computing average value for day level, but can't add hour level to the dimension because of huge data quantity and the speed of maintaining cube. Is there a way to make operator Average work for the base level of hierarchy?
    Any help will be really appreciated!
    Satine

    Hey Brijesh,
    Thank you for your help!
    I am still confused with it. Even month is the leaf level of dimension, but the fact data is day level precision, not month, and the value at month level still should be computed with my specified operator Average, not Sum. I mean If it could be computed with Sum (actually the value at month level was sumed up data from fact table), then why couldn't with Average at the leaf level?
    My test code is from "Oracle OLAP 11g Sample Schema OLAPTRAIN", and data looks like,
    SQL> select * from sales_fact where to_char(day_Key,'yyyy-mm')='2005-04' and rownum=1;
      QUANTITY      PRICE      SALES DAY_KEY         PRODUCT    CHANNEL   CUSTOMER
             1        125        125 13-APR-05          5298         21     284846
    SQL> select day_key,month_id from times where rownum=1;
    DAY_KEY      MONTH_ID
    31-JAN-05    JAN2005Cube name is AVG_TEST, the fact data is from sales_fact.sales. From below, it is pretty clear the value at month level was sumed up data even specified Average operator.
    SQL> SELECT * FROM AVG_TEST_VIEW where time='APR2005';
           AVG TIME
    7849372.89 APR2005
    SQL> select sum(sales) from sales_fact where to_char(day_Key,'yyyy-mm')='2005-04';
    SUM(SALES)
    7849372.89Thanks
    Satine

  • How do I increase the trace level of the dev_server file?

    I have a dual stack SCM system and the java stack will no longer start.  I'm seeing some messages in the dev_server0 and dev_server1 files, in the work directory.  But at the top of those files, it says the current trace level is at 1.  I would like to have some further details as to the error.  How do I increase the trace level of these files?  Thank you. 
    ~TJ

    You can increase the trace level by changing the instance profile
    set "jstart/TRACE = 3", (this affects the server0 process)
    set "rdisp/TRACE = 2" (this affects the ICM).
    Then Restart the ICM and the server process (e.g. from the SAP MMC -
    there is no need to restart the entire instance),
    hope this helps.
    Regards
    SuneeL

  • Sbtio.log and trace levels

    Hi all,
    we're using Tivoli (TSM) with RMAN and I want to log error messages to USER_DUMP_DEST/sbtio.log . The log is there but always empty, even when there is a trace file stating there should be messages in it.
    RMAN documentation says that sbtio.log must be configured with TSM. This does not seem to be true: I found that you can set a trace via ALLOCATE CHANNEL .... TRACE <integer>. I did NOT find anything in the RMAN documentation on this topic.
    Can anyone enlighten me? What trace levels are there, what do I do to just get the errors dumped to the log? Any hints appreciated.
    Thanks, Susanne

    The 'details' can' tbe set to be more specific.
    MAX_DUMP_FILE_SIZE specifies the maximum size of trace files (excluding the
    alert file). Change this limit if you are concerned that trace files may use too much
    space.
    A numerical value for MAX_DUMP_FILE_SIZE specifies the maximum size in
    operating system blocks.
    A number followed by a K or M suffix specifies the file size in kilobytes or
    megabytes.
    The special value string UNLIMITED means that there is no upper limit on trace
    file size. Thus, dump files can be as large as the operating system permits.
    See Also:
    Oracle9i Database Performance Tuning Guide and Reference for
    more information on setting this parameter
    Your operating system-specific Oracle documentation for the
    default value and range of values
    Parameter type String
    Syntax MAX_DUMP_FILE_SIZE = {integer [K | M] |
    UNLIMITED}
    Default value UNLIMITED
    Parameter class Dynamic: ALTER SESSION, ALTER SYSTEM
    Range of values 0 to unlimited, or UNLIMITED
    See Also: Oracle9i Database Administrator’s Guide and Oracle9i
    Database Performance Tuning Guide and Reference for more
    information on setting this parameter

  • Audit Management- get the locking work at task level

    Hi All,
    I am working in Audit management and we have a requirement to get the locking for an audit work at low level i.e the task only will be locked if some person is working on that not the whole audit.
    Ideally we would like the record locking to happen at the lowest level i.e. the action level.
    At the moment it is happening higher up, which is causing us to lock each other out, and only one person seems to be able to work on it at a time. This is a major problem if we wanted to roll it out to a lot of other people to use.
    Also, if it is possible it would be able to allow all users to upload documents and save them to a task, but not to be able to allow them to change the details within the task, e.g. description, dates etc.
    Thanks in advance.
    Tripti

    Hi,
    I dont fully understand your business requirement. However if you are trying control create, change of audit componentes, my inputs as below
    You can define and assign a status profile with auth keys to control who can edit any audit component (AUO,AUP,QUN etc)and who cannot. I also suggest yout use Auth group to provide change access to  fields in Audit components. These user group and auth key can be assigned to roles.
    Some ABAP support is required to validate auth group and auth keys when the user logs in.
    Please revert with your feedback.
    Regards
    Hemanth

  • Setting logging trace level

    Hello,
    Is it possible to set the logging trace level(FATAL, ERROR, ...DEBUG) for the following jolt components :
    JRLY, JRAD, JSL, JSH ? If yes how ? If no how can we debbug this component ? or make the logs more talkative ?
    Thanks in advance for your answers
    pledreau

    There aren't any configurable debug levels available to customers in Jolt.
    Your best bet for debugging this component is to turn on the TMTRACE
    facility. Depending on which ATMI APIs your application is using, this will
    produce few or no additional userlog messages from the Jolt processes
    themselves, but it will produce a significant amount of additional userlog
    information from the application servers that are called by Jolt, which may
    be of help in debugging.
    Ed
    <First Last> wrote in message news:[email protected]..
    Hello,
    Is it possible to set the logging trace level(FATAL, ERROR, ...DEBUG) for
    the following jolt components :
    JRLY, JRAD, JSL, JSH ? If yes how ? If no how can we debbug this component
    ? or make the logs more talkative ?
    Thanks in advance for your answers
    pledreau

  • Setting field (system condition) required at work order operation level

    Hi everyone,
    I wanted to make 'required' system condition field at operation level, however neither it's available in OIOPL nor in OIOPD..
    I'd appreciate if anyone could suggest something
    Thanks in advance

    Hi Sergey,
    The System Condition field enables you to reserve capacity in Production Planning Work Center so that during any maintenance, Production Planning work center should not be undergoing any production.
    But the system condition that is taken into account for the above scenario is the System Condition field at the header level which indicates whether the maintenance requires the equipment to be shut down or in operation so apart from the header System Condition field, the operation system condition fields do not create any capacity requirement at PP Work Center.
    The Operation Sys Condition field is just for reporting purposes and does not hold any significance in PP-PM integration so for that fact there is no provision for setting this field mandatory at Operation level rather it can be set mandatory at Order header level.
    Best Regards,
    Muhammad Usman Kahoot

  • SPEL Review Page - not working at row level

    I have searched the forum for "review page" and "SPEL" try to find solutions and tryed the techniques, but still not working.
    This is what I am trying to do Display Employee details ( empno,sal,comm,deptno) I wanted to display edit icon only when deptno=10 otherwise not.as mentioned in one of the threads i have added a column decode(deptno,10,1,0) DispEdit and set the rendered property of that edit icon/item. Wrote the code necessary to return TRUE or FALSE,
    I think its setting rendered property based on the first record, not changing based on each record.
    currently based on the first record and how I put the logic its 1. Displays the column/edit icon 2. Does not display the column.so it this statement right?
    Please help.
    I found 2 forums that said it worked
    1. same as above
    Problem Using SPEL
    2. in the second thread uses row.setAttributeValue/populate...
    SPEL
    basically I am trying to create a review page with change indicator image ( I have sql that has select old_date,new_date, changes_YN columns).

    Thanks for your reply.
    I have set the rendered property to ${oa.viewobjectname.columnname}
    which is same as u mentioned I guess. It is working based on the first row fetched but not based on each rows value.
    As per Ramkumar in the below thread , SPEL does not work at row level is it TRUE can anypne confirm?
    Re: Bound Values
    I have been waiting to get someresponse from yesterday.
    Anyway, as My plan was to use the logic to build review page ( to show Blue dot if old value is not equals to new value) , I have planned to replace SPEL with oracle SQL logic I wrote a sql which returns something like this, I could not find any better alternates ( wrost one was to create 7 VO's (bcaz i have 7 columns to disp) and apply SPEL there)
    Select 'Empno' column, AEmpno Current,Bempno Proposed,decode( a.empno,b.empno,'','*') from xxx_v
    union
    Select 'Ename',Aename,Bename,decode(aename,bename,'','*') from xxx_v
    * indicates Changed data.

  • Display form  function not working at HRADMIN level.

    Hi ,
    I have got a problem with   an  Adobe interactive form at HRADMIN level. i could run the perform personnel Actions(connecting to R/3), Email functions from the Action Box at  HRADMIN . when i try for the Display form , the page is refreshing it self and not getting  displayed .
    needs some help.
    Rgds,
    Venkat

    Thanks for your reply.
    I have set the rendered property to ${oa.viewobjectname.columnname}
    which is same as u mentioned I guess. It is working based on the first row fetched but not based on each rows value.
    As per Ramkumar in the below thread , SPEL does not work at row level is it TRUE can anypne confirm?
    Re: Bound Values
    I have been waiting to get someresponse from yesterday.
    Anyway, as My plan was to use the logic to build review page ( to show Blue dot if old value is not equals to new value) , I have planned to replace SPEL with oracle SQL logic I wrote a sql which returns something like this, I could not find any better alternates ( wrost one was to create 7 VO's (bcaz i have 7 columns to disp) and apply SPEL there)
    Select 'Empno' column, AEmpno Current,Bempno Proposed,decode( a.empno,b.empno,'','*') from xxx_v
    union
    Select 'Ename',Aename,Bename,decode(aename,bename,'','*') from xxx_v
    * indicates Changed data.

  • XSJS Tracing - Trace files do not show trace levels other than 'error'

    Hi!
    I'm doing some experiments with server side javascript tracing on Hana. I created a small xsjs file that searches for some parameters on the web request (first name, last name and email) so I can call a DB procedure later. As I wanted to make sure that client data was arriving to the server properly, I added some trace calls using $.trace as you can see in the snipped below.
    After some time I noticed that just $.trace.error calls were added to xsengine*trc trace files. In other words, information, debug and warnings were not being included on the trace files.
    $.trace.info("INFO: Register_user.xsjs called");
    $.trace.error("ERROR: Register_user.xsjs called");
    if($.request.method === $.net.http.POST || $.request.method === $.net.http.GET) {
        var first_name = $.request.parameters.get("first_name");
        var last_name = $.request.parameters.get("last_name");
        var email = $.request.parameters.get("email");
        $.trace.error("ERROR: First Name:" + first_name);
        $.trace.error("ERROR: Last Name:" + last_name);
        $.trace.error("ERROR: Email:" + email);
        $.trace.warning("WARNING: First Name:" + first_name);
        $.trace.warning("WARNING: Last Name:" + last_name);
        $.trace.warning("WARNING: Email:" + email);
        // send response
        $.response.contentType = "application/json";
        $.response.status = $.net.http.OK;
        $.response.setBody(" { \"message\" : \"User registered successfully\"} ");
      } else {
        // unsupported method
      $.trace.error("ERROR: Method was not POST");
        $.response.status = $.net.http.INTERNAL_SERVER_ERROR;
    A small piece of a xsengine*.trc file is shown below.
    [4940]{-1}[-1/-1] 2014-09-08 20:37:10.453384 e xsa: demo.user_c register_user.xsjs(00026) : ERROR: Register_user.xsjs called
    [4940]{-1}[-1/-1] 2014-09-08 20:37:10.453690 e xsa: demo.user_c register_user.xsjs(00037) : ERROR: First Name:war
    [4940]{-1}[-1/-1] 2014-09-08 20:37:10.453710 e xsa: demo.user_c register_user.xsjs(00038) : ERROR: Last Name:ning
    [4940]{-1}[-1/-1] 2014-09-08 20:37:10.453796 e xsa: demo.user_c register_user.xsjs(00039) : ERROR: Email:[email protected]
    [4940]{-1}[-1/-1] 2014-09-08 20:58:21.854254 e xsa: demo.user_c register_user.xsjs(00024) : ERROR: request path: /demo/user_creation/logic/register_user.xsjs
    [4940]{-1}[-1/-1] 2014-09-08 20:58:21.854285 e xsa: demo.user_c register_user.xsjs(00026) : ERROR: Register_user.xsjs called
    Here are my doubts:
    Is there any standard filter for trace calls (which for example would show just error messages as default)? If there is, where to change it?
    Are there separate trace files for each trace level?
    Looking at the beginning of each row on the trace file, are the numbers from the left side of the timestamp somehow relevant to determine what kind of trace leve is shown? What do they mean? (the sequence of [4635]{-1}[-1/-1] )
    Related (and useful) links which couldn't solve the problem:
    How to print from XSJS to Console
    JSDoc: Namespace: trace
    I'm using:
    Cloudshare (SAP HANA SPS6 server)
    Hana Studio Version: 1.80.3
    Thanks for the support!

    Hi Fabio,
    You need to do some configurations. Please have a look at Trace Server-Side JavaScript Applications - SAP HANA Developer Guide - SAP Library and View XS JavaScript Application Trace Files - SAP HANA Developer Guide - SAP Library
    Best regards,
    Wenjun

  • 3.4: keyword auto-completion not working for multiple levels

    Auto-completion does not work with higher level keywords, which used to work in LR 3.3 (IIRC).
    Example:
    I enter in the "Click here to add keywords" field:
    "He" then LR tries to complete the keyword by showing keywords starting with "He". Fine.
    But this is a keyword which does not exist so far, so I enter "Heldenplatz > W" because I want to have sorted it under Wien. If I'm not mistaken, LR 3.3 showed after entering the "W" a list of existing keywords starting with W (auto-completion for the one level higher tag). This is not the case anymore. I have to enter  "Heldenplatz > Wien" completely, which makes it slow and error-prone.
    Am I mistaken or can you reproduce it?
    Cheers

    GaryRowe wrote:
    How can it be, after all this time, that they still do not have effective regression testing in place ? Any sane development team (who wants to remain sane ;-) builds this as a priority ... unless they aren't given the resources?
    I think (don't remember though) that this never worked, so regression testing would not have helped.
    What is really to worry, that features aren't consequently and completely implemented (and tested). With a new option in Lightroom 3, Adobe has offered support for keywords with spaces. It seems that this feature as neither been thoroughly analysed or implemented. Thus, we face the currently inconsequent support of it:
    keyword completion only works with the first entered word, but when you enter a complete keyword hierarchy using the ">" letters
    filtering seems to have problems too

  • Trace level 3

    Hello,
    When I logged in, I got pop up saying:
    Environment Information:
    working Dir.
    Trace level 3 activated
    logging activated:
    for maximum data security delete the settings as soon as possible !
    Regards,
    Tushar Chavan.

    Hi Tushar,
    do you use shortcuts to logon? The tracelevel can be defined there too. To check, open the shortcut in notepad and look for the line 'Trace=3' in the section [Configuration].
    Peter
    Points always appreciated

Maybe you are looking for