Work process crash after upgrade to Oracle 11g

Hi guys,
I have recently upgraded my Oracle database to Oracle 11.2.0.2. My environment is SAP R/3 4.7 ext 2.00, AIX 5.3 TL 9.
I also have upgrade my SAP kernel to 6.40_EX2 kernel (the lates one).
I have tested some of advanced compression features including index compression and table compression. But couple times (when this system is idle), suddenly SAP work process is crashed without notice.
Is there any experience about this ? Any suggestion would be appreciated.
Thannk you

Hi All,
This is the log file for dev_w0
================
M Sat Mar 26 00:36:16 2011
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
B db_sqlbreak() = 1
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M ThExecShutDown: perform exclusive shutdown actions
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosSearchAnchor: search anchor for 10
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosSearchAnchor: search anchor for 10
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThCallHooks: call hook >dyKeyTableRest< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosSearchAnchor: search anchor for 2
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThUsrDelEntry (*, *, emaprd2_WPR_10 ) o.k.
M ThICommit3: full commit, set time, keep resources, redispatch
M ThICommit3: commit and keep resources
M ThCheckComOrRb (event=1, full_commit=0)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosSearchAnchor: search anchor for 10
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=0)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosSearchAnchor: search anchor for 10
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThCallHooks: call hook >dyKeyTableRest< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosSearchAnchor: search anchor for 2
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThAlarm: set alarm to 600 sec
M ThICommit3 o.k.
M ThExecShutDown: ThUsrDelEntry o.k.
M ThExecShutDown: called rsau_log_system_stop
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M PfTimeFactor: new value: 25200
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 INACTIVE NO NO YES NO NO 000 255 255 20110326 002910 emaprd2
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=113176338,usrhp=1131b6f80)
C Detaching from DB Server (con_hdl=0,svchp=113176338,srvhp=1131773e0)
C Now connection 0 is disconnected
B Disconnected from connection 0
B statistics db_con_commit (com_total=107, com_tx=58)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 336276) [dpuxtool.c 318]
================
Any suggestion ?
ardhian
http://sapbasis.wordpress.com
http://ardhian.wordpress.com

Similar Messages

Cannot post SD documents after upgrade to Oracle 11g

Dear Gurus,
Lately I have tried to upgrade database for SAP R/3 Enterprise 4.7 from Oracle 9i (9.2.0.7) to Oracle 11g (11.2.0.2). I have tried some of its features including table and index compression.
Right now my team is testing my server and find out some weird behaviour on its database. They try to create some sales order (VA01) and this action create SD document number. But when we try to check this created document number, SAP server replied weird message. It said that this SD document number is not on database and may have been archived.
When I check on ST22, it said "ORA-01502: index 'SAPWPR.VBAP~0' or partition of such index is in unusable state".
FYI, this index has been rebuild and compressed before.
I have tried to rebuild this index successfully, but still not help. I also have checked its status from SE11 and I cannot find this index on VBPA table.
Any suggestion ?
Ardhian
http://sapbasis.wordpress.com

Hi Orkun,
This is the log when I try from SE14 :
B-INDXVBPA0
Start background processing for object VBPA (INDX)
Request: Delete and recreate Index VBPA-0 (ADMIN/10.10.11/12:49)
Process: emaprd2ap_5
sql:
DROP INDEX "VBPA~0"
ORA-02429: cannot drop index used for enforcement of unique/primary ke
y
DDL time(___1): ...228.626 milliseconds
VBPA~0 could not be removed
Index VBPA-0 could not be deleted
Request for VBPA could not be executed
ardhian

Problem with Application Login after upgrading to Oracle 11g

I have a home-grown application with Oracle 10g database running under Windows XP Pro. Recently, I installed Oracle 11g and imported the application database from 10g to 11g (still want to keep the 10g running for a while). However, I now having problem with the application logging into the new 11g database. (Keep getting invalid user/name message).
BTW, I have no problem accessing the 11g database through SQLPlus (logging in with the same name and password that I use for the application), and the connection test of NetManager (again using the same name and password that I use for the application) was successful.
The application itself uses the old Borland BDE (Borland Database Engine) to access the 10g and 11g database. Testing confirms that BDE can access Oracle 11g with no problems.
Any idea about the probable cause(s) of the problem?
Thanks in advance,
sg2000

11g by default is case sensitive username/password.
You can disable that with setting parameter SEC_CASE_SENSITIVE_LOGON to false.
SQL> SHOW PARAMETER SEC_CASE_SENSITIVE_LOGON
SQL> ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE;

Curve crashes after upgrade to OS 4.5.0.81

Curve crashes after upgrade to OS 4.5.0.81
Ever since I upgraded to the T-Mobile handheld OS 4.5.0.81, my Curve crashes several times a day down to a black screen. I can't power back up on battery -- I have to plug in to an AC source, then power back up.
Hourglass remains on for quite some time to boot up, then I get a message about verifying security settings.
Curve usually crashes when I'm on a call, although now it seems to be happening when I'm using any of the phone setting menus.
I've already tried 1) freeing up memory on the SIM card by deleting pictures 2) doing a clean install of the handheld software using Desktop Manager.
It's still crashing. My BlackBerry is two months out of warranty (of course!). T-Mobile says I have to buy a new phone. I think it's a software issue (I've used the phone with no problems between 3/1/2008 and 4/4/2009).
Any help/insight would be appreciated.
Message Edited by wrdywmn on 05-11-2009 07:34 PM
Solved!
Go to Solution.

Below there is an excerpt from page to link I provided above:
What If I Want To Downgrade?
Forum member 'bfrye' made a good guide: Here is a quick install guide to your blackberry. This should easily cover reinstallation of OS and reverting back to previous OS version as well.
1. Download the version of OS you want to install from your carrier's website.
2. Extract or install the files from the previous step. They will automatically install into the correct location. This location will be C:\Program Files\Common Files\Research in Motion\Shared\Loader Files. Under this directory you will see directories with the model number of your device (if you installed the correct files) followed by a version number. Under these directories will be a host of .alx and .cod files. Do not modify or delete these files. They are needed to install the new OS.
3. Assume the BlackBerry Handheld Manager is installed, when you plug your device in, a popup will appear and ask if you want to upgrade your device. Choose upgrade and follow the steps given by the Application Loader. If you have any 3rd party applications you would like to keep, locate and select them at this time to avoid having to reload them after the new OS is installed.
4. This will also be the time the apploader will ask if you want to erase all data and reload or backup and restore the data on your device. Choose your preference and continue.
5. Typically a complete OS reload with backup and restore can take anywhere from 5-15 minutes depending on the amount of data on your device to restore.
6. The apploader will inform you when the process is complete. After this, the device will automatically reset itself (sometime this will take longer than a normal reboot) and once completed and on, your device will be upgraded and ready to go.
Now if you wish to downgrade your device to a previous version, many of the above steps will apply.
First, you will have to remove the newer OS from your PC. Do this by going to add/remove programs in the control panel and removing the software for the new BB OS. Make sure desktop manager is not running when you do this. After complete, restart the Desktop Manager.
When you plug in your device, if everything went well, the Desktop Manager should tell you that your PC has an older version of desktop tools than is installed on the device. It will give you an option to keep the version on your BlackBerry or downgrade to the version on your PC. You will want to select downgrade and let apploader do the work.
Should this method fail, you will have to download the file javaloader.exe from the internet. Place it in a common directory (I usually put mine in the Loader Files directory for easy access. From the directory you have javaloader.exe installed in type "javaloader -usb wipe". This will completely erase all data and applications from your devie. Now navigate to C:\Program Files\Common Files\Research in Motion\AppLoader and delete the file vendor.xml. Now plug in your device and install the new OS from scratch. Open apploader and select the USB port as your connection. It will then bring to you to the main apploader screen and all the OS packages will be listed with status as Install.
If you have question beyond the scope of this document please feel free to post them. However I suggest reading and rereading these steps to ensure you have tried the most basic and tried steps to load or reload your OS. Have fun and enjoy!
Have you done all steps described ?
if your issue solved set "Solution" mark at the relevant post

AW crashes after upgrade to OSX

AW crashes after upgrading to OS10.4.4.
I have never, in many years, had it fail to open prior to this.
I don't know if this is a coincident or not, but it will not open at all.
It begins the process then stops and gives this message:
.... The application Appleworks quit unexpectedly.
I restarted the system a couple of times but that did not help.
I believe it fails during font installation.
Maybe a font is incompatible with the new OS. ...but which one??
Harold

After updating AppleWorks 6 or OS X, it is necessary to delete the AppleWorks preferences. See my user tip, AppleWorks has stopped working correctly, for more information.
Even though it does appear that you may have a corrupt font, do the preference thing first. It is likely that the font was added with the system upgrade or you have a duplicate font. First, look for a font named Bauhaus 93. This font is installed by versions of Microsoft Office before Office 2004. The Bauhaus 93 with Office 2004 is not corrupt. If you don't find Bauhaus 93, before going through the trial & error of locating a corrupt font, use FontBook to check for duplicate fonts.
The trial & error method of corrupt font isolation involves moving all of the fonts from the various font folders to another folder (the Desktop is a good place) & then moving a few back at a time & trying to launch AppleWorks. When it crashes you will know the culprit is in the last bunch.
Peggy

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

5 crashes after upgrade to ios my address book immediately and I can not access emails, because the password is wrong and when I go to mail settings crashes the application immediately from

5 crashes after upgrade to ios my address book immediately and I can not access emails, because the password is wrong and when I go to mail settings crashes the application immediately from

Same issue also. Occurring both on my iPad 2 and iPhone 4 after upgrading to ios 5
By the way, Mattban and Sancasslano, are either of you also experiencing any of the following issues:
* Problems with Contacts either crashing or listing no names
* Problems with turning iCloud on or off for application under Settings->iCloud... On both mine I just get a pop up saying that iCloud is being turned off but Contacts then just locks up.
* General problems when trying to synch applications on the iPad or iPhone over iCloud?
I am wondering if all these issues are in someway related to and whether it is worth trying to turn off iCloud somehow, though I cannot work out how this can be done once set up.

Various programs crash after upgrade to 10.6.4

Various programs crash after upgrade to 10.6.4 but only late in the day / evening. There seem to be no crashes early in the day.
After a reboot the problem is fixed and things seem to work OK.
Might this be some kind of memory-related issues?? Programs not releasing memory until eventually there's nothing left?
I'm a Windows guy until recently so am not up to speed with Mac software / hardware yet.
Any suggestions?
Thanks.

Hi, I am facing major instability in MS Office for Mac 2008 after the 10.6.4 upgrade. Programs (Word, Excel, PowerPoint), just crash randomly. Mostly when opening existing Office documents but there is no fixed pattern.
Tried Office auto update but no joy.
Any suggestions
Here is the MS Error log
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXCBADACCESS
Date/Time: 2010-07-23 20:37:36 +0530
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 12.2.5.100505
Crashed Module Name: libTrueTypeScaler.dylib
Crashed Module Version: unknown
Crashed Module Offset: 0x00009bd5
Blame Module Name: libTrueTypeScaler.dylib
Blame Module Version: unknown
Blame Module Offset: 0x00009bd5
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Operating System Information
Operating System: Mac OS X 10.6.4 (Build 10F569)
CPU: Intel Core Duo, Number: 2, Speed: 2147 MHz
gestaltPhysicalRAMSize err = 0, result = 2047 MB
gestaltSystemVersion err = 0, result = 0x1064
Screen: 1440 x 900, depth = 32, ltbr = 0, 0, 900, 1440
Microsoft Application Information:
Error Reporting UUID: 0B338D65-7DAA-4B4A-B8B1-0C17F587C24A
Time from launch: 0 hours, 14 minutes, 46 seconds
Total errors on this client: 40
Does this help at all ?

Table space not reduce after delete in oracle 11G

Hi Team,
I have a DB 11.1.0.7 on unix.
I have execute delete tables on tablespace, but this not reduce.
Thanks

935299 wrote:
What segment space management type is defined for the tablespace in question?
MANUAL
Then you should check out the documentation some more.
But even if you shrink the table segement what is that going to do for the data file size?
I don't undertand you.
ThanksYour thread is titled "Table space not reduce after delete in oracle 11G" which implies to me that you are interested in reducing the size of a tablespace (which really means reducing the size of the underlying datafile(s)).
So, if you shrink the size of the sys.aud$ table, will that cause the datafile(s) to become smaller? Will it accomplish your goal? What else, if anything, needs to happen?

Unable to start Hyperion EPM Architect - Process Manager after upgrade

Hi All,
I'm unable to start Hyperion EPM Architect - Process Manager after upgrading from EPMA 11.1.1.3.0 to 11.1.1.3.03. I get the following error in the Event Viewer.
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> Hyperion.DataAccessLayerCore.DataAccessLayerException: Database version mismatch: Hyperion.SessionManager schema version is 9.5.0.0.0.10, database schema version is 9.5.0.0.9.1.
at Hyperion.DataAccessLayerCore.DataAccessLayer..ctor(NameValueCollection settings, String tablePrefix, String baseNamespace, String schemaVersion)
at Hyperion.SessionManager.DAO.SessionManagerDataAccessLayer..ctor(NameValueCollection settings)
at Hyperion.DimensionServer.SessionManager.SessionStoreRdbms.Initialize(String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout)
at Hyperion.DimensionServer.SessionManager.SessionManager.Initialize(String jvmPath, String classPath, String ctgLibPath, String cssConnInfo, String hubHost, String hubPort, Boolean enableNestedGroups, String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout, Boolean restorePastInstanceSessions, Boolean ...
I've run through all the steps of patching EPMA ran the Oracle_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql script per the patch readme. But can't figure out where it's pulling the schema version number from. Any ideas?
Thanks,
Chuck

Hi,
you forgot to update the EPMA database. Last step in patching is:
Now, you must run the database upgrade script before starting the process manager.
Run the single database upgrade script that corresponds to your database vendor.
Oracle_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
SQL_Server_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
DB2_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
The scripts are located in the following directory:
%HYPERION_HOME%\OPatch\EPMA_11_1_1_3_01\files\products\Foundation\BPMA\Server\conf\
hope that helps.

Password problem in oracle 10g after upgrading from oracle 9i

Hi to all,
i'm migrating oracle 9i to oracle 10g. in oracle 9i username/password are same character(eg kareem/kareem)
after upgrading to oracle 10g will it create any problem. Because in oracle 10g the condition is when creating user is username and password should not contain same character (kareem/kareem not allowed).
Thanks in advance

in oracle 10g document, they have mention below condition to create user. See the second condition.
• Passwords must be between 4 and 30 characters long.
• Passwords cannot be the same as the user name.
• Passwords must be from the database character set and can include the underscore (_), dollar ($), and pound sign (#) characters.
• Passwords cannot be Oracle reserved words.
• Don't start the password with a numeral.
• Don's use change_on_install or manager as passwords, since they are used by Oracle.
As i'm going to upgrade oracle 9i to 10g. if it give problem because username and password are same then i have to request my development team to change the password in their application.Can you please verify and tell me.
Edited by: user7071421 on Sep 25, 2008 4:33 AM

"URGENT"Infopackage load error in process chian after upgrade

Hi Gurus,
We have a strange issue in one of the process chain after upgrade from 3.5 to NW 2004s. In a process chain we have 5 info packages, 3 in parallel as they load data in 3 different cubes and 2 in series after successful completion of info packages on top.
Now the process chain shows red info package with error message Last delta upload not yet completed. Cancel
When we check the RSMO, we find all the 3 loads on top finish successfully while in process chain log display as error at info package with above error message and process chain never advances. Actually loads finish successfully but process chain shows error in info package.
When we investigated further, the request ID in failed info package in process chain shows different ID which never loaded in cube but data load takes place successfully using different request ID(checked in RSMO and request in cube).
I suppose the process chain trigger the info package load twice simultaneously, one load get successful and second load request failed in log as first one is runningthis is my guess
Please help me as this is an urgent issue.
Regards,
Anil

Hi All,
We fond the root cause of the error message. Actually when we trigger the process chain, the info packages loads get triggered twice after an interval or around 2 minutes.
Here if zero records are loaded then second request ( after 2 min) get loaded too with zero records but if first request is loading some records then second request will find the data load still running and will throw error as last delta still not finished.
Have you seen this scenario before?
Regards,
Anil

Any performance gains after upgrade to Oracle 10 ?

Hello,
we have been using EBS 11.5.9 (with Oracle 9). Does anybody see any improvements from performance point of view after upgrade to Oracle 10r2 (but without upgrade of EBS to R12) ?
Regards

Somethings have been faster for us and somethings have been slower. In general it seems the same or better. When we get a chance to look at the jobs that are performing poorly I'm sure we will be able to make them perform. Make sure you find and apply all of the performance patches for the modules you have implemented, we are missing one right now and it is hurting our Configurator developers instance. I have actually set the the optimizer_features_enable back to 9i. This is something I would not recommend doing in a production environment, and we are only doing it until we can get the patch that fixes the optimizer in 10g applied.
One surprise for us was the increase in memory required, in our test and development instances we have found a 1GB SGA is as small as you can go with 10g and still have reasonable performance. We had a number of 9i ebus databases around 300-400MB SGA that performed just fine. This limited the number of environments we could squeeze on a single server (not really a bid deal if you only have a few dev, test and training environments).
In our production environment in order to have the same size datacache more memory was consumed. Were we could get away with a shared pool of 4GB under 9i, it grows to over 6GB in 10g. Looks like more PGA is also being used. 10g along with RUP5 and upgrading the java from 1.3 to 1.5 has increased our memory consumption. We increased memory from 64GB to 96GB and we are using a large portion of the additional 32GB. We were right at the limit with 64GB in our 9i production instance but we had never experienced the paging that we did with 10g. Now at 96GB we nolonger see any paging.

IPhone 4 8GB white working very slow after upgrading to IOS7

Phone 4 8GB white working very slow after upgrading to IOS7

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Invalid SQL command after upgrading to Oracle 9i

After upgrading to Oracle 9i, the SQL queries in some of our existing reports are no longer valid. The Oracle error returned is "old style outer join () can not be used with ANSI joins". It appears that the SQL query generated by Crystal Reports is correct in that it uses "LEFT OUTER JOIN" instead of just naming the tables separated by a comma, but it also includes the "()" qualifer on the matching columns which is no longer allowed. Is there any way to overcome this error short of rewriting the reports based on a command?

Hello,
A couple suggestions come to mind.
Business Objects tend to take problematic SQL generation very seriously at least on the SQL and Oracle platforms (due to their widespread use) and I would first grab the latest database/engine hotfixes to be certain it hasn't been tracked and corrected already. If you can clearly reproduce this issue (sounds like you can) then it should be easy to convince the support team at BOBJ to track the issue. However...
Since their hotfix release cycle is rather slow especially for items that have workarounds (even sometimes painful workarounds) you may want to consider using a Stored Procedure instead of a Command.
Commands have a notorious history of issues/limitations that tend to burn you later - especially when you have to update many reports. A stored procedure would likely render the + qualifier a moot point.
Cheers, Dylan
Dylan Lopez - 604.628.4467 Previously: Microsoft .NET Resource in Developer Support @ Business ObjectsCurrently: Principal @ Inno Software Inc / Independent Contractor Group

Work process crash after upgrade to Oracle 11g

Similar Messages

Maybe you are looking for