Work process related question.
suppose i have a CI and 5 dialog instances. can i have an instance dedicated completely for update process that is without any other workprocess like D,M,S,B
and can any body suggest me the purpose of other instances ie advantage of having instances.
thanks,
swaroop.
Dear,
Go to table PMCO you will get the values.
Regards,
Pardhu
Similar Messages
-
Hello, I want to know which table or FM can be used to get plan cost for a work order (Header level) in IW33 > Cost > Plan Cost. Please let me know.
Thanks.Dear,
Go to table PMCO you will get the values.
Regards,
Pardhu -
"deafult search engine on a new tab" - this thread was closed but I have a related question. [the word “default” is spelled as it on the thread] Once you put the new url in, what then? Close it? When tried, it did not work. The closest answer is noted here. Instructing to go to about:fig. Specifically, I installed the accuweather add=on and it took over my tab home page - the one that comes up when you click for a new tab. I didn't like it so I clicked the button to remove it and the page went blank. I searched to see out to restore the tab page, tired the reply at this page :
http://support.mozilla.org/en-US/questions/753256?s=install+search+box+on+new+tabs&r=3&as=s
But it did not work. Can some on help me? Just want to know how to make google or some page open on a new tab.
Many thanksThanks so much for your support. As I said I am not a professional, so I by chance saw a friend who is and this is what he suggested and it worked.
We googled for an answer and found this site: http://www.guidingtech.com/8004/have-new-tab-page-open-specific-website-firefox-chrome/
It says to Download and install Download and install''' NewTabURL''' and gives instructions on how to. Now when I open the tab it goes to my preferred search page! -
Whats the difference between clean with CORE and without CORE ?
Hi,
The difference between cancelling a work process with core and with out core is given below.
Cancel with Core -
> Cancels the work process. A core file is created, which you can view in transaction ST11.
Cancel Without Core -
> Cancels a work process, and a core file is not written. -
I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.
1.)If i am using the continuous output mode.and the size of generated data is less than 32 MB.If i want to preload the memory,what should i do?I want that first of all i load all my data to onboard memory & then i want to make start the transfer between 6534 & peripheral.Is it possible?As per me it should be.Plz tell me how should i do this?I think that in normal procedure the transfer between 6534-peripheral & outputting data from pc buffer to onboard memory works parallely.But i don't want this.Is it poss
ible?
(2).Similarly in finite input operation(pattern I/O) is it possible to preload the memory and then i read it?Because i think that the PC memory will be loaded automatically when 6534 acquires the data and then when we use DIO read vi the pc buffer data will be transferred to application buffer.If this is true,i do not want this.Is it possible?
(3) One more question is there if i am using normal operation onboard memory will be used bydefault right?Now if i want to use DMA and if i have data of 512 bytes to acquire.How will it work and how should i do it?Please tell me the sequence of operations.As per my knowledge in normal DMA operation we have 32 Bytes FIFO is there so after acquisition of 32 bytes only i can read it.How it will known to me that 32 bytes acquisition is complete?Next,If i want to acquire each byte separately using DMA interrupts what should i do?Provide me the name of sourse from which i can get details about onboard memory & DMA process of 6534 specifically
(4).In 6534 pattern Input mode,if i want to but only 10 bits of data.and i don't want to waste any data line what should i do?Hi Vishal,
I'll try to answer your questions as best I can.
1) It is definitely possible to preload data to the 32MB memory (per group) and start the acquisition after you have preloaded the memory. There are example programs on ni.com/support under Example Code for pattern generation and the 6534 that demonstrate which functions to use for this. Also, if your PC memory buffer is less than 32MB, it will automatically be loaded to the card. If you are in continuous mode however, you can choose to loop using the on-board memory or you can constantly be reading the PC memory buffer as you update it with your application environment.
2) Yes, your data will automatically be loaded into the card's onboard memory. It will however be transferred as quickly as possible to the DMA FIFO on the card and then transferred to the PC memory buffer through DMA. It is not going to wait until the whole onboard memory is filled before it transfers. It will transfer throughout the acquisition process.
3) Vishal, searching the example programs will give you many of the details of programming this type of application. I don't know you application software so I can't give you the exact functions but it is easiest to look at the examples on the net (or the shipping examples with your software). Now if you are acquiring 512 bytes of data, you will start to fill your onboard memory and at the same time, data will be sent to the DMA FIFO. When the FIFO is ready to send data to the PC memory buffer, it will (the exact algorithm is dependent on many things regarding how large the DMA packet is etc.).
4) If I understand you correctly, you want to know if you waste the other 6 bits if you only need to acquire on 10 lines. The answer to this is Yes. Although you are only acquiring 10 bits, it is acquired as a complete word (16bits) and packed and sent using DMA. You application software (NI-DAQ driver) will filter out the last 6 bits of non-data.
Hope that answers your questions. Once again, the example code on the NI site is a great place to start this type of project. Have a good day.
Ron -
Help Required: Working with relational data
Hi,
I'm looking for some advice
Scenario
We have a customer who has an SE relational database with Apex for transaction processing. They require reporting functionality and are debating whether to buy BI SE One or BI EE; they will not buy the enteprise edition database though.
Questions
Here are my questions:
1. In order to use answers and dashboards, does the relational data have to be in a dimensional format. Is this reccommended.
2. We were debating on whether to create data marts for various business requirements. Is this standard procedure for relational data (Which is not too complex)
3. If the data has to be in a dimensional format, is this best modelled using warehouse builder or the model layer of the repository using BI Administrator. (Baring in mind that the customer is an SME using a SE database)
The main problem where having, been fairly new to warehouse building, is that we dont know what the best path is to take when working with relational data. Do we create dimensional models? What should we use? Is a relational structure suitable enough?
Can anyone shed light on our problems
Regards
Kevin1. In order to use Answers and Dashboards you do not need to have a Data Warehouse. It can report out of both Transactional database as well as a data warehouse.
2. It depends on what your business requirements are. BI EE/SE1 does not require you to have data marts. Data Marts would give performance gains, would help you in visualizing the transactional data from a business standpoint, is a big plus but not a mandate. If you want to go that route of creating Datamarts, you can easily do that using BI SE1 since that gives you warehouse builder which can be both used as a data modelling tool and a ETL tool.
3. Warehouse Builder is a ETL tool. It helps in you visualizing/deploying data warehouses in databases. But BI EE Admin tool is more of a logical dimension modelling tool wherein the facts and dimensions do not exist physically but the tool uses them to do the querying/processing.
Since you are just starting, what you can do is to use BI EE directly on top of the transactional system for the time being. But as a long term solution you can start working on your data marts and as soon as they are ready you can port the BI EE on top of them rather than the transactional system.
Thanks,
Venkat
http://oraclebizint.wordpress.com -
Dear All,
I am a BW fresher and currently attending an interview for BW support role.
Could anyone please send me some interview questions mainly focusing on BW SUPPORT related issues??
Thanking you
RAOHI Rao,
These are the Daily Support processes & related links,
***From SDN
Normally the production support activities include
Scheduling
R/3 Job Monitoring
B/W Job Monitoring
Taking corrective action for failed data loads.
Working on some tickets with small changes in reports or in AWB objects.
The activities in a typical Production Support would be as follows:
1. Data Loading - could be using process chains or manual loads.
2. Resolving urgent user issues - helpline activities
3. Modifying BW reports as per the need of the user.
4. Creating aggregates in Prod system
5. Regression testing when version/patch upgrade is done.
6. Creating adhoc hierarchies.
Also refer these posts:
Re: In production Support , how i can acquire the knowledge
Re: How to resolve tickets its urgent
Re: production support issues
production support
we can perform the daily activitiesin Production
1. monitoring Dataload failures thru RSMO
2. Monitoring Process Chains Daily/weekly/monthly
3. Perform Change run Hirerachy
4. Check Aggr's Rollup
To add to the above
1)check data targets are ready for reporting,
2) No failed or cancelled jobs in sm37 monitors and Bw Monitor.
3) All requests are loaded for day,monthly and yearly also.
4) Also to note down time taken for loading of critical infocubes which are used for reporting.
5) Is there any break in any schedules from your process chains.
It's totally a client specific tool.
The common features here can be
A ticket Id,
Priority,
Consultant ID/Name,
User ID/Name,
Date of Post,
Resolving Time etc.
There ideally is also a knowledge repositary to search for a similar problem and solutions given if it had occured earlier.
You can also have traning manuals (with screen shots) for simple transactions like viewing a query, saving a workbook etc so that such queried can be addressed by using them.
When the problem is logged on to you as a consultant, you need to analyse the problem, check if you have a smilar problm occured earlier and use ready solutions, find out the exact server on which this has occured etc.
you have to solve the problem(assuming you will have access to the dev sytem) and post the solution and ask the user to test after the preliminary testing from your side.
Get it transported to production once tested and post it as closed i.e the ticket has to be closed.
---If there is a dataload failure, what steps/checks do i need to follow. etc.
it means thats depends upon the failure we need to monitor and take corrective action ..
generally we do in load failures...
ST22 for any shortdumps
sm21 for log entries and
TRF entries
sm12 for any locks
we need to analyze from these t-codes.
changing query/object
-change ticket from open to working.
-get additional details if any required.
-create transport request in dev.
-make the change and save in transport.
-check that transport goes through OK.
-do testing in QA system.
-after testing is OK,get change transported to prod.
-update ticket and resolve it.
-usually helpdesk closes ticket after confirmation with user who raised ticket.
data load failure
-regularly check rsmo(monitor) for data load failures.
-if load fails,get details from details tab of monitor.
-usual errors are:master data missing,special characters in data,datasource not replicated,delta load issues etc.
-get root cause of error,and fix data load manually.
-check that manually updated data is GREEN and available for reporting in data target.
-update ticket and resolve it.
Siggi's weblogs for data load error and how to restart process chain
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
1. Why there is frequent load failures during extractions? and how to analyse them?
If these failures are related to Data, there might be data inconsistency in source system. Though we are handling properly in transfer rules. We can monitor these issues in T-code -> RSMO and PSA (failed records) and update.
If we are talking about whole extraction process, there might be issues of work process scheduling and IDoc transfer to target system from source system. These issues can be re-initiated by canceling that specific data load and ( usually by changing Request color from Yellow - > Red in RSMO). and restart the extraction.
2. Explain briefly about 0record modes in ODS?
ORECORDMODE is SAP Delivered object and will be added to ODS object while activating. Using this ODS will be updated during DELTA loads.. This has three possible values ( X D R).. D & R is for deleting and removing records and X is for skipping records during delta load.
3. What is reconciliation in bw? What the procedure to do reconciliation?
Reconcilation is the process of comparing the data after it is transferred to the BW system with the source system. The procedure to do reconcilation is either you can check the data from the SE16 if the data is coming from a particular table only or if the datasource is any std datasource then the data is coming from the many tables in that scenario what I used to do ask the R/3 consultant to report on that particular selections and used to get the data in the excel sheet and then used to reconcile with the data in BW . If you are familiar with the reports of R/3 then you are good to go meaning you need not be dependant on the R/3 consultant ( its better to know which reports to run to check the data ).
4. What is the daily task we do in production support.How many times we will extract the data at what times.
It depends... Data load timings are in the range of 30 mins to 8 hrs. This time is depends in number of records and kind of transfer rules you have provided. If transfer rules have some kind of round about transfer rules and updates rules has calculations for customized key figures... long times are expected..
Usually You need to work on RSMO and see what records are failing.. and update from PSA.
5. What are some of the frequent failures and errors?
As the frequent failures and errors , there is no fixed reason for the load to be fail , if you want it for the interview perspective I would answer it in this way.
a) Loads can be failed due to the invalid characters
b) Can be because of the deadlock in the system
c) Can be becuase of previuos load failure , if the load is dependant on other loads
d) Can be because of erreneous records
e) Can be because of RFC connections
These are some of the reasons for the load failures.
suresh -
Error occurs in background work process.
Respected Guru's,
error occurs in two background work process, i have displayed the trace files of both the bgd work process.
How to rectify this error ?
Further, can you please help me in identifying the problem, please suggest me good material which gives steps for troubleshooting such error in the developer's and system trace.
Thank you.
Dayanandan.a
Developer trace file for BGD WP 1
trc file: "dev_w12", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 2864
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc12 2864) [dpxxdisp.c 1016]
M <EsNT> Memory Reset enabled as NT default
M calling db_connect ...
M db_connect o.k.
M rdisp/reinitialize_code_page -> 0
M
M Tue Jul 30 10:22:53 2002
M SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020730.AUD
M
M Tue Jul 30 10:22:55 2002
M *** ERROR => SlicLockSema: sema locked [slicshm.c 89]
M *** ERROR => SlicShmInit: SlicLockSema failed [slicshm.c 231]
M *** ERROR => SlicValBufInit: cannot initialize SHM [slicshm.c 299]
M *** ERROR => SlicValBufRead: license buffer not initialized [slicshm.c 329]
M *** ERROR => SlicCheckBuf: some error reading license buffer contents [slicshm.c 419]
M
M Wed Jul 31 00:00:49 2002
M SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020730.AUD
M SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020731.AUD
M Thu Aug 01 00:00:49 2002
M SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020731.AUD
M SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020801.AUD
M
M Fri Aug 02 00:00:49 2002
M SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020801.AUD
M SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020802.AUD
M
M Fri Aug 02 00:14:09 2002
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 235]
M ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c 10641]
M ***LOG R18=> ThPrivCommit, ThICommit () [thxxhead.c 11307]
M in_ThErrHandle: 1
M *** ERROR => ThPrivCommit: ThICommit (step 4, th_errno 9, action 2, level 1) [thxxhead.c 8277]
M
M Info for wp 12
M
M stat = 4
M reqtype = 4
M act_reqtype = 4
M tid = 12
M mode = 0
M len = 24
M rq_id = 6638
M rq_source = 1
M last_tid = 12
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 16
M tab_name = > <
M
M
M Modeinfo for User T12/M0
M
M tm state = 2
M uid = 13
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPUSER <
M terminal = > <
M client = >800<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 3
M mode state = 0x42
M th_errno = 9
M async_receives = 0
M cpic_receive = 0
M em handle = 2
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M lock = 0
Developer's trace file for BGD WP 2
trc file: "dev_w13", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 2872
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc13 2872) [dpxxdisp.c 1016]
M <EsNT> Memory Reset enabled as NT default
M
M Tue Jul 30 10:21:44 2002
M calling db_connect ...
M db_connect o.k.
M
M Tue Jul 30 10:22:25 2002
M rdisp/reinitialize_code_page -> 0
M
M Tue Jul 30 10:22:53 2002
M SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020730.AUD
M
M Wed Jul 31 00:00:52 2002
M SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020730.AUD
M SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020731.AUD
M
M Thu Aug 01 00:00:49 2002
M SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020731.AUD
M SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020801.AUD
M
M Fri Aug 02 00:00:51 2002
M SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020801.AUD
M SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020802.AUD
M
M Fri Aug 02 00:14:09 2002
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 235]
M ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c 10641]
M ***LOG R18=> ThPrivCommit, ThICommit () [thxxhead.c 11307]
M in_ThErrHandle: 1
M *** ERROR => ThPrivCommit: ThICommit (step 4, th_errno 9, action 2, level 1) [thxxhead.c 8277]
M
M Info for wp 13
M
M stat = 4
M reqtype = 4
M act_reqtype = 4
M tid = 13
M mode = 0
M len = 24
M rq_id = 6643
M rq_source = 1
M last_tid = 13
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 16
M tab_name = > <
M
M Modeinfo for User T13/M0
M
M tm state = 2
M uid = 14
M term type = 0x0
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPUSER <
M terminal = > <
M client = >800<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 3
M mode state = 0x42
M th_errno = 9
M async_receives = 0
M cpic_receive = 0
M em handle = 3
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M lock = 0
M
M
M Sat Aug 03 00:00:55 2002
M SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020803.AUD
M
M Sun Aug 04 00:00:49 2002
M SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020803.AUD
M SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020804.AUD
M
M Mon Aug 05 00:00:49 2002
M SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020804.AUD
M SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020805.AUD
M
M Tue Aug 06 00:00:49 2002
M SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020805.AUD
M SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020806.AUDThank you, Bhaskar,
I have performed consistency check for temse objects and all the comments are displayed in red color.
Does it mean that objects are inconsistent. But, no comments states that object are inconsistent.
I have attached the comments displayed,
Consistency check of table TST01 / TemSe objects
This comment occurs repeatedly, Unable to access the related file Length = 0
Incorrect number of data lines in TST03
Object with part number 1 missing
Object reset Length = 0
The related file has an incorrect length
Consistency check of table TST03 / TemSe data
No object found in TST01
May i delete all objects, as all the comments are red in color.
Dayanandan.A -
When trying to deploy a sandboxed solution containing only a feature with a simple associated event receiver from VS 2013, I'm getting the following error:
Error occurred in deployment step 'Add Solution': An unknown exception occurred while executing a sandboxed code solution request in the worker process.\r\n|0
I'm working in Visual Studio 2013, deploying to SharePoint 2013.
The SharePoint project is very basic. I've only added a feature and an associated event receiver. It works without the event receiver. Then after I simply add the event receiver I get the error.
I've tried deploying directly from VS 2013 as well as publishing to a .WSP and uploading via web interface. Same error reported using both methods. I'm doing this using an Administrator account that I've confirmed is a site collection administrator.
Additionally, I've found that if I change Sandboxed Solution to False, deploy it, retract it, then change Sandboxed Solution back to True, then I can successfully deploy it. But this doesn't seem to be a permanent solution as the error will resurface a day
or two later...Hi Steve,
Are you running your SharePoint 2013 on domain controller?
http://www.learningsharepoint.com/2013/08/09/sharepoint-2013-error-an-unknown-exception-occurred-while-executing-a-sandboxed-code-solution-request-in-the-worker-process-rn0/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b7408608-c21b-45d9-bc16-e6afff510cd2/installed-sharepoint-2013-foundation-on-window-2010-server-issues-activating-sandbox-solutions?forum=sharepointadmin
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful -
Hi i have deployed a sandbox solution using visual stdio2012 on share-point 2013 site at my local machine. when i tried to add web parts from custom folder to web part zone following error comes "An unknown exception occurred while executing a sand
boxed code solution request in the worker process."
how ever this is working on sharepoint online site. but not only on my local sharepoint site
Can anyone help me . reply will be appreciated.
Thanks in advance.
Ritu RanjanGuYuming,
You have not yet addressed the original issue, please DO NOT mark this as answered. The suggestion to use the ulsviewer would only help in finding out more about the issue, but will not solve the unknown exception. I have been able to duplicate
the problem in my Development Environment and it seems to be related to permissions or running the SP 2013 "Development" environment on a Windows Server 2012 Domain Controller (to support single machine development).
Ritu Ranjan,
I found a post with a similar issue but might be related to this post as well.
http://social.technet.microsoft.com/Forums/en-US/sharepointadmin/thread/b7408608-c21b-45d9-bc16-e6afff510cd2. I tried switching the User Code Host account from the farm account to the App Pool account but the error stays the same.
Here is information from the ULS to provide more details to anyone who would like to help resolve this issue:
01/27/2013 12:11:38.38 SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium - - An unknown exception occurred while executing a sandboxed code solution request in the worker process.\r\n|0 - userCodeWrapperType.FullName = "Microsoft.SharePoint.UserCode.SPUserCodeWebPartWrapper", userAssemblyGroup
= ".UserCodeAssemblyGroupId = ", GroupId = "081B51E0AD7645D4A38ADD78D5AA9F9E-uNL2pPMjZ3/km03rur+D1AZ1Qe8Fs6BnPIuoCN/pgcU="", .RootDirectoryPath = "C:\ProgramData\Microsoft\SharePoint\UCCache\8CFCA978EB52EC0\081B51E0AD7645D4A38ADD78D5AA9F9E%2DuNL2pPMjZ3%2547km03rur%2BD1AZ1Qe8Fs6BnPIuoCN%2547pgcU%3D-1"",
siteCollectionId = e116e750-38ff-4c55-aca4-acd04a69aff6 - Inner Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.Remoting.RemotingException: An attempt to connect to the
remote activator ... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ...failed with exception 'System.Runtime.Remoting.RemotingException: Cannot resolve 'channel' template reference: 'http client'. at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ReportUnableToResolveTemplateReferenceError(ConfigNode
node, String referenceName, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsChannelNode(ConfigNode node, RemotingXmlConfigFileData configData, Boolean isTemplate)
at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsNode(ConfigNode node, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessApplicationNode(ConfigNode
node, RemotingXmlConfigFileData configData) at System.Runt... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ...ime.Remoting.Activation.RemotingXmlConfigFileParser.ParseConfigNode(ConfigNode rootNode) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ParseDefaultConfiguration()
at System.Runtime.Remoting.RemotingConfigHandler.LoadMachineConfigIfNecessary() at System.Runtime.Remoting.RemotingConfigHandler.FindDelayLoadChannelForCreateMessageSink(String url, Object data, String& objectURI)
at System.Runtime.Remoting.RemotingServices.CreateChannelSink(String url, Object data, IMessageSink& chnlSink) at System.Runtime.Remoting.RemotingServices.Unmarshal(Type classToProxy, String url, Object data)
at System.Runtime.Remoting.Activation.LocalActivator.DoRemoteActivation(IConstructionCallMessage ctorMsg)'. at System.Runtime.Remoting.Activation.LocalActivator.DoRem... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ...oteActivation(IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Activation.LocalActivator.Activate(IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Messaging.ClientContextTerminatorSink.SyncProcessMessage(IMessage
reqMsg) at System.Runtime.Remoting.Activation.ActivationServices.Activate(RemotingProxy remProxy, IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(IMessage reqMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.SharePoint.SPSite_SubsetProxy..ctor() --- End of inner exception stack trace ---
Server stack trace: at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCac... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ...hed, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark&
stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, BindingFlags
bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes) at System.Activator.CreateInstance(Type type,... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ... Object[] args, Object[] activationAttributes) at Microsoft.SharePoint.SPSite.__CreateInstance_SPSite(Boolean forStaticMethod, Object[] constructorParameters) at Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeToken__Inner(Byte[]
userCodeToken) at Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeToken(Byte[] userCodeToken) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.SetBinaryTokens(Byte[] binaryUserCodeToken,
Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid
siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionCo... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ...ntext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup
userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeAppDomain.Execute(Type
userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId)
at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessProxyForShim.ExecuteIntern... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ...al(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext)
at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessProxy.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnM... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.38* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe8j Medium ...essage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.ExecuteDelegate.EndInvoke(IAsyncResult
result) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, SPUserToken userToken, String currentAffinity, SPUserCodeExecutionContext
executionContext) a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41 SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium - - An unknown exception occurred while executing a sandboxed code solution request in the worker process.\r\n|0 - Monitored process "ipc://25989203-dc18-4882-8d49-1640047f95e9:7000" has encountered a Pipeline Termination
exception while executing user code. - Inner Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.Remoting.RemotingException: An attempt to connect to the remote activator
failed with exception 'System.Runtime.Remoting.RemotingException: Cannot resolve 'channel' template reference: 'http client'. at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ReportUnableToResolveTemplateReferenceError(ConfigNode
node, String referenceName, RemotingXmlConfigFileData configData) at... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ... System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsChannelNode(ConfigNode node, RemotingXmlConfigFileData configData, Boolean isTemplate) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsNode(ConfigNode
node, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessApplicationNode(ConfigNode node, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ParseConfigNode(ConfigNode
rootNode) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ParseDefaultConfiguration() at System.Runtime.Remoting.RemotingConfigHandler.LoadMachineConfigIfNecessary()
at System.Runtime.Remoting.RemotingConfigHandler... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ....FindDelayLoadChannelForCreateMessageSink(String url, Object data, String& objectURI) at System.Runtime.Remoting.RemotingServices.CreateChannelSink(String url, Object data, IMessageSink&
chnlSink) at System.Runtime.Remoting.RemotingServices.Unmarshal(Type classToProxy, String url, Object data) at System.Runtime.Remoting.Activation.LocalActivator.DoRemoteActivation(IConstructionCallMessage ctorMsg)'.
at System.Runtime.Remoting.Activation.LocalActivator.DoRemoteActivation(IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Activation.LocalActivator.Activate(IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Messaging.ClientContextTerminatorSink.SyncProcessMessage(IMessage
reqMsg) at System.Runtime.Remoting.Activation.ActivationServices.Activate(... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ...RemotingProxy remProxy, IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(IMessage reqMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type) at Microsoft.SharePoint.SPSite_SubsetProxy..ctor() --- End of inner exception stack trace --- Server stack trace: at System.RuntimeTypeHandle.CreateInstance(RuntimeType
type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean
fillCache, StackCrawlMark& stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackC... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ...rawlMark& stackMark) at System.Activator.CreateInstance(Type type, Boolean nonPublic) at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder,
Object[] args, CultureInfo culture, Object[] activationAttributes, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Activator.CreateInstance(Type type, Object[] args, Object[] activationAttributes) at Microsoft.SharePoint.SPSite.__CreateInstance_SPSite(Boolean forStaticMethod, Object[] constructorParameters) at Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeToken__Inner(Byte[]
userCodeToken) at Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeT... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ...oken(Byte[] userCodeToken) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.SetBinaryTokens(Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext
executionContext) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken,
SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup,
Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExec... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ...utionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeAppDomain.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup
userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessProxyForShim.ExecuteInternal(Type
userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessProxy.Execute(Type
userCodeWrapperType, SPUserCodeCachedAssem... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ...blyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext) at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr
md, Object[] args, Object server, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.ExecuteDelegate.EndInvoke(IAsyncResult
result) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.Execute(Type use... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.41* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag002 Medium ...rCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, SPUserToken userToken, String currentAffinity, SPUserCodeExecutionContext executionContext) a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42 SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium - - An unknown exception occurred while executing a sandboxed code solution request in the worker process.\r\n|0 - Request executing userSolution Id "081b51e0-ad76-45d4-a38a-dd78d5aa9f9e" for site collection id "
e116e750-38ff-4c55-aca4-acd04a69aff6" has encountered an unhandled exception while executing user code. - Inner Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.Remoting.RemotingException:
An attempt to connect to the remote activator failed with exception 'System.Runtime.Remoting.RemotingException: Cannot resolve 'channel' template reference: 'http client'. at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ReportUnableToResolveTemplateReferenceError(ConfigNode
node, String r... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...eferenceName, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsChannelNode(ConfigNode node, RemotingXmlConfigFileData configData,
Boolean isTemplate) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsNode(ConfigNode node, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessApplicationNode(ConfigNode
node, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ParseConfigNode(ConfigNode rootNode) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ParseDefaultConfiguration()
at System.Runtime.Remoting.RemotingConfigHandler.LoadMachineConfigIfNecess... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...ary() at System.Runtime.Remoting.RemotingConfigHandler.FindDelayLoadChannelForCreateMessageSink(String url, Object data, String& objectURI) at System.Runtime.Remoting.RemotingServices.CreateChannelSink(String
url, Object data, IMessageSink& chnlSink) at System.Runtime.Remoting.RemotingServices.Unmarshal(Type classToProxy, String url, Object data) at System.Runtime.Remoting.Activation.LocalActivator.DoRemoteActivation(IConstructionCallMessage
ctorMsg)'. at System.Runtime.Remoting.Activation.LocalActivator.DoRemoteActivation(IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Activation.LocalActivator.Activate(IConstructionCallMessage ctorMsg)
at System.Runtime.Remoting.Messaging.ClientContextTerminatorSink.SyncProcessMessage(IMessage reqMsg) at Syste... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...m.Runtime.Remoting.Activation.ActivationServices.Activate(RemotingProxy remProxy, IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(IMessage reqMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.SharePoint.SPSite_SubsetProxy..ctor() --- End of inner exception stack trace ---
Server stack trace: at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean pu... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...blicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, Boolean nonPublic) at System.RuntimeType.CreateInstanceImpl(BindingFlags
bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo
culture, Object[] activationAttributes) at System.Activator.CreateInstance(Type type, Object[] args, Object[] activationAttributes) at Microsoft.SharePoint.SPSite.__CreateInstance_SPSite(Boolean forStaticMethod,
Object[] constructorParameters) at Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeToken__Inner(Byte[] userCodeToken) a... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...t Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeToken(Byte[] userCodeToken) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.SetBinaryTokens(Byte[] binaryUserCodeToken,
Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid
siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.Execute(Type
userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binar... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...yUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeAppDomain.Execute(Type
userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId)
at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessProxyForShim.ExecuteInternal(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext
executionContext) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessPro... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...xy.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.ExecuteDelegate.EndInvoke(IAsyncResult result) at Microsoft.Sh... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.42* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ag005 Medium ...arePoint.UserCode.SPUserCodeWorkerProcess.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, SPUserToken userToken, String currentAffinity, SPUserCodeExecutionContext
executionContext) a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82 SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium - - An unknown exception occurred while executing a sandboxed code solution request in the worker process.\r\n|0 - Worker Process Pipeline unrecoverable failure: FullName = "Microsoft.SharePoint.UserCode.SPUserCodeWebPartWrapper",
userAssemblyGroup = ".UserCodeAssemblyGroupId = ", GroupId = "081B51E0AD7645D4A38ADD78D5AA9F9E-uNL2pPMjZ3/km03rur+D1AZ1Qe8Fs6BnPIuoCN/pgcU="", .RootDirectoryPath = "C:\ProgramData\Microsoft\SharePoint\UCCache\8CFCA978EB52EC0\081B51E0AD7645D4A38ADD78D5AA9F9E%2DuNL2pPMjZ3%2547km03rur%2BD1AZ1Qe8Fs6BnPIuoCN%2547pgcU%3D-1"",
siteCollectionId = e116e750-38ff-4c55-aca4-acd04a69aff6 - Inner Exception: Microsoft.SharePoint.UserCode.SPUserCodeExecutionPipelineTerminallyFailedException: An unknown exception occurred while executing a sandboxed code solution request in the... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ... worker process.\r\n|0 ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.Remoting.RemotingException: An attempt to connect to the remote
activator failed with exception 'System.Runtime.Remoting.RemotingException: Cannot resolve 'channel' template reference: 'http client'. at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ReportUnableToResolveTemplateReferenceError(ConfigNode
node, String referenceName, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsChannelNode(ConfigNode node, RemotingXmlConfigFileData configData, Boolean isTemplate)
at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessChannelsN... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ...ode(ConfigNode node, RemotingXmlConfigFileData configData) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ProcessApplicationNode(ConfigNode node, RemotingXmlConfigFileData configData)
at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ParseConfigNode(ConfigNode rootNode) at System.Runtime.Remoting.Activation.RemotingXmlConfigFileParser.ParseDefaultConfiguration() at System.Runtime.Remoting.RemotingConfigHandler.LoadMachineConfigIfNecessary()
at System.Runtime.Remoting.RemotingConfigHandler.FindDelayLoadChannelForCreateMessageSink(String url, Object data, String& objectURI) at System.Runtime.Remoting.RemotingServices.CreateChannelSink(String url, Object data, IMessageSink&
chnlSink) at System.Runtime.Remoting.RemotingServices.Unm... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ...arshal(Type classToProxy, String url, Object data) at System.Runtime.Remoting.Activation.LocalActivator.DoRemoteActivation(IConstructionCallMessage ctorMsg)'. at System.Runtime.Remoting.Activation.LocalActivator.DoRemoteActivation(IConstructionCallMessage
ctorMsg) at System.Runtime.Remoting.Activation.LocalActivator.Activate(IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Messaging.ClientContextTerminatorSink.SyncProcessMessage(IMessage reqMsg)
at System.Runtime.Remoting.Activation.ActivationServices.Activate(RemotingProxy remProxy, IConstructionCallMessage ctorMsg) at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(IMessage reqMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type) at Microsoft.Sha... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ...rePoint.SPSite_SubsetProxy..ctor() --- End of inner exception stack trace --- Server stack trace: at System.RuntimeTypeHandle.CreateInstance(RuntimeType
type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean
fillCache, StackCrawlMark& stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type
type, Boolean nonPublic) at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, StackCraw... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ...lMark& stackMark) at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Activator.CreateInstance(Type type, Object[] args, Object[] activationAttributes) at Microsoft.SharePoint.SPSite.__CreateInstance_SPSite(Boolean forStaticMethod, Object[] constructorParameters) at Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeToken__Inner(Byte[]
userCodeToken) at Microsoft.SharePoint.SPSite.RegisterCallContextUserCodeToken(Byte[] userCodeToken) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.SetBinaryTokens(Byte[] binaryUserCodeToken,
Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext) at Microsoft.SharePoint.UserC... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ...ode.SPUserCodeApplicationHostAppDomainRef.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext
executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeApplicationHostAppDomainRef.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId,
Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeAppDomain.Execute(Type userCodeWrapperType,
SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] bin... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ...aryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext, Boolean shouldUsageLog, Int32 currentProcessId) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessProxyForShim.ExecuteInternal(Type
userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcessProxy.Execute(Type
userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, Byte[] binaryUserCodeToken, Byte[] proxyOperationToken, SPUserCodeExecutionContext executionContext) at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr
md, Object[]... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ... args, Object server, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.ExecuteDelegate.EndInvoke(IAsyncResult
result) at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, SPUserToken userToken, String currentAffinity, SPUserCodeExecutionContext
executionContext) --- End of inner exception stack trace --- at Microsoft.ShareP... a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.82* SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
fe7p Medium ...oint.UserCode.SPUserCodeWorkerProcess.Execute(Type userCodeWrapperType, SPUserCodeCachedAssemblyGroup userAssemblyGroup, Guid siteCollectionId, SPUserToken userToken, String currentAffinity, SPUserCodeExecutionContext
executionContext) at Microsoft.SharePoint.UserCode.SPUserCodeExecutionHost.Execute(Type userCodeWrapperType, Guid siteCollectionId, SPUserToken userToken, String affinity, SPUserCodeExecutionContext executionContext) a8f2f89b-6d07-b067-8f51-1d9df413faf0
01/27/2013 12:11:38.85 SPUCHostService.exe (0x0E60) 0x0A34 SharePoint Foundation Sandboxed Code Service
ebh5 Monitorable - Stopping and restarting worker processes because of an unhandled exception. Shim PID: "0x0FD8" Proxy PID: "0x0FC8"
01/27/2013 12:11:38.96 SPUCHostService.exe (0x0E60) 0x1164 SharePoint Foundation Sandboxed Code Service
aeqw6 Monitorable - Stopping shim process. Shim process name: "SPUCWorkerProcess" Shim PID: "0x0FD8" Shim service url: "ipc://25989203-dc18-4882-8d49-1640047f95e9:7000"
01/27/2013 12:11:39.07 SPUCHostService.exe (0x0E60) 0x1164 SharePoint Foundation Sandboxed Code Service
aeqw7 Monitorable - Stopping proxy process. Proxy process name: "SPUCWorkerProcessProxy" Proxy PID: "0x0FC8" Proxy service url: "ipc://305d6f3b-f836-4adf-9fcf-ad4687d27fc3:7000"
01/27/2013 12:11:39.18 SPUCWorkerProcessProxy.exe (0x0FC8) 0x0FCC SharePoint Foundation Unified Logging Service 8wsw High
Now terminating ULS (SPUCWorkerProcessProxy.exe, onetnative.dll)
01/27/2013 12:11:39.27 SPUCHostService.exe (0x0E60) 0x14B8 SharePoint Foundation General
84yj Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_DATA.
01/27/2013 12:11:39.27 SPUCHostService.exe (0x0E60) 0x14B8 SharePoint Foundation Sandboxed Code Service
d1ul Unexpected - Monitoring could not find the perf counters associated with the shim user code process, PID="0", disable monitoring.
01/27/2013 12:11:45.82 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Unified Logging Service b8fx High
ULS Init Completed (SPUCWorkerProcessProxy.exe, onetnative.dll)
01/27/2013 12:11:46.44 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Topology
2myf Medium Disabling the configuration filesystem and memory caches.
01/27/2013 12:11:46.50 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Upgrade
ajyw6 High 01/27/2013 12:11:46.50 SPUCWorkerProcessProxy (0x1604) 0x1780 SharePoint Foundation Upgrade SPHierarchyManager ajyw6 DEBUG [SPTree Value=SPConfigurationDatabase] added to dependency cache by lookup 00000000-0000-0000-0000-000000000000
01/27/2013 12:11:46.63 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Upgrade
ajyx0 High 01/27/2013 12:11:46.63 SPUCWorkerProcessProxy (0x1604) 0x1780 SharePoint Foundation Upgrade SPDelegateManager ajyx0 DEBUG Waiting for mutex to initialize type dictionary 00000000-0000-0000-0000-000000000000
01/27/2013 12:11:52.30 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Database
8u1d High Flushing connection pool 'Data Source=SPDB;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15'
01/27/2013 12:11:52.30 SPUCWorkerProcessProxy.exe (0x1604) 0x0E04 SharePoint Foundation Database
8u1d High Flushing connection pool 'Data Source=SPDB;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15'
01/27/2013 12:11:52.30 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation General
avew High An application domain named SPUCWorkerProcessProxy.exe has just been loaded.
01/27/2013 12:11:52.32 SPUCWorkerProcessProxy.exe (0x1604) 0x0E04 SharePoint Foundation Topology
2myf Medium Enabling the configuration filesystem and memory caches.
01/27/2013 12:11:52.32 SPUCWorkerProcessProxy.exe (0x1604) 0x0E04 SharePoint Foundation Topology
aik7t High Set the certificate validation policy for this app domain to the SharePoint certificate validator.
01/27/2013 12:11:52.33 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Topology
2q0j Medium The configuration subsystem was initialized by multiple threads. One of the caches will be disposed.
01/27/2013 12:11:52.33 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Topology
2q0k Medium Disposing of an SPConfigurationDatabase reference from:
01/27/2013 12:11:52.33 SPUCWorkerProcessProxy.exe (0x1604) 0x1780 SharePoint Foundation Monitoring
b4ly High Leaving Monitored Scope (Initializing Admin OM). Execution Time=6138.56866568698
01/27/2013 12:11:52.33 SPUCWorkerProcessProxy.exe (0x1604) 0x0E04 SharePoint Foundation Monitoring
b4ly High Leaving Monitored Scope (Initializing Admin OM). Execution Time=5221.37511562071
01/27/2013 12:11:52.71 SPUCWorkerProcessProxy.exe (0x1604) 0x1230 SharePoint Foundation General
00000 Medium Microsoft SharePoint Foundation log file
01/27/2013 12:11:52.71 SPUCWorkerProcessProxy.exe (0x1604) 0x1230 SharePoint Foundation General
94vw Medium Primary Domain = DEV15, Computer Name = SPDEVBOX
01/27/2013 12:11:52.82 SPUCWorkerProcessProxy.exe (0x1604) 0x1230 SharePoint Foundation Object Cache
9j6t High SPXmlDocCache cache parameters are: high water mark 10485760 bytes, low water mark 5242880 bytes, interval 180000 ms -
hi!
i have 4.7e and oracle 8i in my machine. and i was used past 5 months.
now when i start sap server, the work process will show 'ended'. why?
and following error message will created.
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Apr 12 13:42:56 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\ABC\SYS\exe\run\dboraslib.dll' ...
B
B Thu Apr 12 13:43:02 2007
B Library 'C:\usr\sap\ABC\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\ABC\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M
M Thu Apr 12 13:43:03 2007
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 2372
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2372) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M
M Thu Apr 12 13:43:05 2007
M DpShMCreate: sizeof(wp_adm) 9776 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 001E0040, size: 1974816)
M DpShMCreate: allocated sys_adm at 001E0040
M DpShMCreate: allocated wp_adm at 001E0560
M DpShMCreate: allocated tm_adm_list at 001E2B90
M DpShMCreate: allocated tm_adm at 001E2BB8
M DpShMCreate: allocated wp_ca_adm at 0037F878
M DpShMCreate: allocated appc_ca_adm at 00383EC8
M DpShMCreate: allocated comm_adm_list at 00385638
M DpShMCreate: allocated comm_adm at 00385650
M DpShMCreate: allocated ca_info at 003B4450
M DpShMCreate: allocated wall_adm at 003B4458
X
X Thu Apr 12 13:43:08 2007
X EmInit: MmSetImplementation( 2 ).
X
X Thu Apr 12 13:43:23 2007
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C
C Thu Apr 12 13:43:34 2007
C Got ORACLE_HOME=D:\oracle\ora92 from environment
C
C Thu Apr 12 13:47:05 2007
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C
C Thu Apr 12 13:47:07 2007
C Logon as OPS$-user to get SAPABC's password
C Connecting as /@ABC on connection 0 ...
C Attaching to DB Server ABC (con_hdl=0,svchp=0401CE1C,svrhp=06D74A54)
C
C Thu Apr 12 13:47:52 2007
C Starting user session (con_hdl=0,svchp=0401CE1C,srvhp=06D74A54,usrhp=06D7D22C)
C
C Thu Apr 12 13:47:55 2007
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
C Try to connect with default password
C Connecting as SAPABC/<pwd>@ABC on connection 0 ...
C Starting user session (con_hdl=0,svchp=0401CE1C,srvhp=06D74A54,usrhp=06D7D22C)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
B
B Thu Apr 12 13:47:56 2007
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 957] [dbsh 0957 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server abc_ABC_00 on host abc (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Apr 12 13:47:56 2007
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M
M Thu Apr 12 13:47:57 2007
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2372) [dpnttool.c 346]
kindly give me solution.
thanks and regards
raghubalanHi
Does the memory settings wrong which leads to it.
Do you have enough disk space and memory to have those many work processess.
hope these question helps you to decide the error. -
How to moniter the max quantity of used dialog work process in SAP system
Dear Gurus,
The quantity of Dia Work Process(DWP) of APP1 is: 16 (rdisp/wp_no_dia=16)
The quantity of Dia Work Process(DWP) of APP2 is: 16 (rdisp/wp_no_dia=16)
The quantity of Dia Work Process(DWP) of APP3 is: 20 (rdisp/wp_no_dia=20)
The quantity of Dia Work Process(DWP) of APP4 is: 20 (rdisp/wp_no_dia=20)
So the quantity of DWP in our SAP system is: 72 (=161620+20).
We have 75 dialog users and many RFC callings via JCO method from J2EE system.
I'm afriad the 72 DWPs will be run out of use someday.
So I want to moniter the max quantity of used DWP every per hour to prevent the situation I mentioned above.
Could you give me some suggestions?
Thank you very much..
JasonHi Olivier,
I really appreciate your help. You told me a very useful clew!
As the method you told me, I have some questions:
(a3) Do you restart your 'CI + 6 DIA' separately every week? Why did you do that?
(a4) How to calculate 'CPU intensive time'? For example, App server 'APS' was restarted on 8-10-2011 and stopped on 8-20-2011.
There was a DWP(PID 557550) was created and activated on APS during this period(10 days). So If I add up each 'cpu time' of the task
which 557550 executed, I can get the 'CPU intensive time' of 557550 (dispalyed in SM50). Right?
In other words:
DWP(PID 557550) finished task1: cpu time = 5ms 8-10-2011
DWP(PID 557550) finished task2: cpu time = 4ms
DWP(PID 557550) finished task3: cpu time = 6ms 8-20-2011
So the 'CPU intensive time'(Between 8-10-2011 and 8-20-2011) of DWP(PID 557550) is: 15ms (5ms4ms6ms). Right?
(a5)Can we moniter the 'CPU intensive time' of DWPs in CCMS automatically? (I want to prevent the situation: The DWPs in our entire ECC are occupied.)
Thank you!
Jason -
Maximum number of dialog work process
Hello gurus,
Could you please let me know what is the maximum number of dialog work process that you can configure in an Netweaver system with ABAP 7.0 before considering to install a new application server to distribute the load?
Thaks for your help,
Best regards> Just one question, according to the following statement, can I think that I should estimate a usage of 1/4 CPU core by every dialog WP?
No, this was just an example to make clear what I mean.
> Do you know any SAP note that could help me to estimate the number of WP according to the load of the system?
There is no such note and there can't be.
You could have a system with e. g. 100 users where 10 of them do really produce load, the other 90 may just run a few transactions or do just nothing - so 50 WPs is too much. You could also have a system with 20 users where ALL are entering data all data and doing reporting and stuff so 20 WPs is too less. There may also be processes like ATP that use one background worprocess and spawn a number of dialog WPs you configure in the application. If you configure too few of them, the ATP run will run very log, if you configure too much, the system will be overloaded and slowing down. I can imagine dozens of other examples what may cause load or not.
Because of that it's not possible to give a formular how many WPs to be configured for how many users.
This is a tuning thing and needs to be estimated in the first weeks after a GoLive; watch the system, reconfigure, watch. Check ST03N and SM50/SM66 or book an early watch after some time, they have rough estimates and give usually good advises. Out of theory it's almost impossible to predict something.
Markus -
Unable to start the SAP instance - work processes are terminated
Hello,
We are implementing SAP ECC 6.0 on iSeries, i5/OS V5R4.
The application server & the database server are implemented on one centralized physical iSeries server.
We recently attempted to copy one SAP system (DEV) from one iSeries server to another, through restoring from an Entire System backup.
After successfully conducting the restore onto the new (destination) iSeries server, and conducting all the necessary host name changes to be the same as the host name of the source system, we encountered a problem when trying to start the SAP : all the jobs under sub-system R3_00 are started, except the jobs constituting the SAP work processes; i.e. WP00, WP01, etc.
The following is the file holding the SAP start log :
/usr/sap/<SID>/DVEBMGS00/work/sapstart.log
SAP-R/3-Startup Program Rel 700 V1.8 (2003/04/24)
Starting at 2008/04/07 13:55:49
Startup Profile: "/usr/sap/PRO/SYS/profile/START_DVEBMGS00_MASAPPRO"
Execute Pre-Startup Commands
(47) Local: /usr/sap/PRO/SYS/exe/run/cleanipc 00 remove
(47) Executing "/usr/sap/PRO/SYS/exe/run/cleanipc 00 remove"...
(47) Okay!
(47) Local: CLRLIB LIB(R3WRK00)
(47) Executing CL command "CLRLIB LIB(R3WRK00)"...
(47) Okay!
(47) Local: /usr/sap/PRO/SYS/exe/run/sapmscsa pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -n
(47) Executing "/usr/sap/PRO/SYS/exe/run/sapmscsa pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -n"...
(47) Okay!
Starting Programs
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/saposcol" asynchronously...
(47) Okay, child's pid=52.
(52) Starting: local /usr/sap/PRO/SYS/exe/run/saposcol
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/msg_server pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
(47) Okay, child's pid=53.
(53) Starting: local /usr/sap/PRO/SYS/exe/run/msg_server pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/disp+work pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
(47) Okay, child's pid=54.
(54) Starting: local /usr/sap/PRO/SYS/exe/run/disp+work pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/rslgcoll pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F" asynchronously...
(47) Okay, child's pid=55.
(55) Starting: local /usr/sap/PRO/SYS/exe/run/rslgcoll pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/rslgsend pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F" asynchronously...
(47) Okay, child's pid=56.
(56) Starting: local /usr/sap/PRO/SYS/exe/run/rslgsend pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/igswd_mt -mode=profile pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
(47) Okay, child's pid=57.
(57) Starting: local /usr/sap/PRO/SYS/exe/run/igswd_mt -mode=profile pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
(47) Waiting for Child Processes to terminate.
(47) **** 2008/04/07 13:55:56 Child 53 terminated with Status 0 . ****
(47) **** 2008/04/07 13:56:25 Child 54 terminated with Status 0 . ****
Thank you in advance for your cooperation.
Best regards.
Reda KhalifaHello,
I did delete all the SAP-related SQL Packages, using the command : DLTR3PKG, then IPL the server, then try to start the SAP system, but with no success (the same previous status)
As per your request, the following are contents of the four log files :
dev_disp.new, dev_disp, dev_w0, dev_rd :
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 00
sid PRO
systemid 324 (IBM iSeries with OS400)
relno 7000
patchlevel 0
patchno 98
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 52
Tue Apr 8 13:47:32 2008
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 52) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 98 successfully loaded
shared lib "dw_xtc.so" version 98 successfully loaded
shared lib "dw_stl.so" version 98 successfully loaded
shared lib "dw_gui.so" version 98 successfully loaded
shared lib "dw_mdm.so" version 98 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
WARNING => DpNetCheck: NiServToNo(sapdp00) failed (rc=-3)
ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c 5217]
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MASAPPRO_PRO_00 <
DpShMCreate: sizeof(wp_adm) 50960 (1456)
DpShMCreate: sizeof(tm_adm) 27955928 (27928)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1848)
DpShMCreate: sizeof(wall_adm) (200056/174328/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x700000080000000, size: 28969592)
DpShMCreate: allocated sys_adm at 0x700000080000000
DpShMCreate: allocated wp_adm at 0x700000080001ee8
DpShMCreate: allocated tm_adm_list at 0x70000008000e5f8
DpShMCreate: allocated tm_adm at 0x70000008000e658
DpShMCreate: allocated wp_ca_adm at 0x700000081ab7930
DpShMCreate: allocated appc_ca_adm at 0x700000081abd6f0
DpShMCreate: allocated comm_adm at 0x700000081abf630
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000081b45310
DpShMCreate: allocated gw_adm at 0x700000081b45390
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x700000081b453c0
DpShMCreate: allocated wall_adm at 0x700000081b453c8
Tue Apr 8 13:47:33 2008
MBUF state OFF
DpCommInitTable: init table for 500 entries
ERROR => DpIPCInit2: NiServToNo failed ((null)--3) [dpxxtool2.c 511]
DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Apr 8 13:47:43 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Apr 8 11:47:43 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
8 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
9 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
10 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
11 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
12 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
13 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
14 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
15 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
16 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
17 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
18 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
19 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
20 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
21 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
22 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
23 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
24 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
25 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
26 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
27 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
28 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
29 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
30 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
31 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
32 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
33 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
34 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Tue Apr 8 11:47:43 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
ERROR => DpMQueueInfo: DpQueueInfo [dpxxtool.c 2032]
Dump of tm_adm structure: Tue Apr 8 11:47:43 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Apr 8 11:47:43 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Apr 8 13:47:48 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >MASAPPRO_PRO_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect: shmat key 57 prot 3/0 done
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect: shmat key 57 prot 1/4096 done
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x0x1808c5508 )
ShmKeyPermission( 76 ) = 0777 (octal)
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 1, 3 )
ShmProtect: shmat key 1 prot 3/0 done
ShmCreate( 1, 0, 2, -> 0x0x700000070000000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 2, 3 )
ShmProtect: shmat key 2 prot 3/0 done
ShmCreate( 2, 0, 2, -> 0x0x700000080000000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 3, 3 )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x0x700000090000000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 4 ) = 0777 (octal)
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 14 ) = 0777 (octal)
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 11 ) = 0777 (octal)
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 19 ) = 0777 (octal)
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 33 ) = 0777 (octal)
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 41 ) = 0777 (octal)
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 42 ) = 0777 (octal)
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 43 ) = 0777 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 45 ) = 0777 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 44 ) = 0777 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 54 ) = 0777 (octal)
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 46 ) = 0777 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 47 ) = 0777 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 64 ) = 0777 (octal)
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 65 ) = 0777 (octal)
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 9 ) = 0777 (octal)
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 8 ) = 0777 (octal)
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 17 ) = 0777 (octal)
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 18 ) = 0777 (octal)
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 6 ) = 0777 (octal)
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 34 ) = 0777 (octal)
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 58 ) = 0777 (octal)
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 7 ) = 0777 (octal)
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 40 ) = 0777 (octal)
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 76 ) = 0777 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 51 ) = 0777 (octal)
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 77 ) = 0777 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 78 ) = 0777 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 52, 3 )
ShmProtect: shmat key 52 prot 3/0 done
ShmCreate( 52, 0, 2, -> 0x0x7000000a0000000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 30 ) = 0777 (octal)
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 70 ) = 0777 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 56 ) = 0777 (octal)
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 10 ) = 0777 (octal)
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 57, 3 )
ShmProtect: shmat key 57 prot 3/0 done
ShmCreate( 57, 0, 2, -> 0x0x700000020000000 )
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0x0xfffffffffffe900 )
ShmKeyPermission( 62 ) = 0777 (octal)
ERROR => ShmCleanup(62) failed 3 [mpixx.c 3239]
MpiCleanup() -> 1
removing Semaphore-Management
Sem2Lock: LockObjPtr = 0x700000030000158, Yield = 1
ERROR => e=2 semctl(4,0,IPC_RMID,..) (2: No such file or directory) [semux.c 2098]
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0x0xfffffffffffe910 )
ShmKeyPermission( 31 ) = 0777 (octal)
ERROR => DpRqIQRemove: ShmDelete [dpxxqueu.c 431]
closing connect handles (dgm + tcp)
***LOG Q05=> DpHalt, DPStop ( 52) [dpxxdisp.c 10594]
shutdown completed - server stopped ***
Good Bye .....
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 00
sid PRO
systemid 324 (IBM iSeries with OS400)
relno 7000
patchlevel 0
patchno 98
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 9197
Thu Jan 31 05:54:08 2008
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 9197) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 98 successfully loaded
shared lib "dw_xtc.so" version 98 successfully loaded
shared lib "dw_stl.so" version 98 successfully loaded
shared lib "dw_gui.so" version 98 successfully loaded
shared lib "dw_mdm.so" version 98 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MASAPPRO_PRO_00 <
DpShMCreate: sizeof(wp_adm) 50960 (1456)
DpShMCreate: sizeof(tm_adm) 27955928 (27928)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1848)
DpShMCreate: sizeof(wall_adm) (200056/174328/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x700000080000000, size: 28969592)
DpShMCreate: allocated sys_adm at 0x700000080000000
DpShMCreate: allocated wp_adm at 0x700000080001ee8
DpShMCreate: allocated tm_adm_list at 0x70000008000e5f8
DpShMCreate: allocated tm_adm at 0x70000008000e658
DpShMCreate: allocated wp_ca_adm at 0x700000081ab7930
DpShMCreate: allocated appc_ca_adm at 0x700000081abd6f0
DpShMCreate: allocated comm_adm at 0x700000081abf630
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000081b45310
DpShMCreate: allocated gw_adm at 0x700000081b45390
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x700000081b453c0
DpShMCreate: allocated wall_adm at 0x700000081b453c8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Thu Jan 31 05:54:09 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)EsStdUnamFileMapInit: ES base = 0x0x7000000d0000000
EsStdInit: Extended Memory 12288 MB allocated
<ES> 3071 blocks reserved for free list.
ES initialized.
Thu Jan 31 05:54:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:15 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:15 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:15 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:16 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:16 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:17 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:17 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:18 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:18 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:45 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:45 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:47 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:49 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:51 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:53 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:00 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:02 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:03 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:06 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:08 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:13 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:18 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:21 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:23 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:25 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:27 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:27 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:28 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:29 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:30 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:32 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1626]
***LOG Q0K=> DpMsAttach, mscon ( MASAPPRO) [dpxxdisp.c 11664]
DpStartStopMsg: send start message (myname is >MASAPPRO_PRO_00 <)
DpStartStopMsg: start msg sent
Thu Jan 31 05:55:32 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:34 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 98
Release check o.K.
Thu Jan 31 05:56:06 2008
MBUF state ACTIVE
Thu Jan 31 05:56:07 2008
DpModState: change server state from STARTING to ACTIVE
Thu Jan 31 05:57:28 2008
change reqtype of W0 from 1 to 4
***LOG Q0V=> DpAdXWpConf, mod_req ( 0DIABTC) [dpxxdisp.c 13661]
change reqtype of W1 from 1 to 4
***LOG Q0V=> DpAdXWpConf, mod_req ( 1DIABTC) [dpxxdisp.c 13661]
Thu Jan 31 08:00:55 2008
change reqtype of W0 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req ( 0BTCDIA) [dpxxdisp.c 13661]
change reqtype of W1 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req ( 1BTCDIA) [dpxxdisp.c 13661]
Thu Jan 31 08:44:38 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 12 / sock 19
(SI_ECONN_BROKEN/73; I4; ST; 10.2.4.135:1179) [nixxi.cpp 4248]
Network error of client T42, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T42 is 10.2.4.135(10.2.4.135)
***LOG Q04=> DpRTmPrep, NiBufReceive (347 ALSALI 42 training4 ) [dpxxdisp.c 11375]
RM-T42, U347, 900 ALSALI, training4, 08:44:28, M0, W1, SBWP, 2/1
Thu Jan 31 09:09:27 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 77 / sock 84
(SI_ECONN_BROKEN/73; I4; ST; 10.2.3.76:1233) [nixxi.cpp 4248]
Network error of client T109, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T109 is 10.2.3.76(10.2.3.76)
***LOG Q04=> DpRTmPrep, NiBufReceive (462 ASEDKY 109 amrsedke ) [dpxxdisp.c 11375]
RM-T109, U462, 900 ASEDKY, amrsedke, 08:49:14, M0, W1, VA05, 2/1
Thu Jan 31 09:55:17 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 49 / sock 56
(SI_ECONN_BROKEN/73; I4; ST; 10.2.14.50:1158) [nixxi.cpp 4248]
Network error of client T81, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T81 is 10.2.14.50(10.2.14.50)
***LOG Q04=> DpRTmPrep, NiBufReceive (364 MHASSAN 81 Motazhassan ) [dpxxdisp.c 11375]
RM-T81, U364, 900 MHASSAN, Motazhassan, 09:54:12, M1, W6, , 4/2
Thu Jan 31 09:55:27 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 108 / sock 51
(SI_ECONN_BROKEN/73; I4; ST; 10.2.14.52:1158) [nixxi.cpp 4248]
Network error of client T168, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T168 is 10.2.14.52(10.2.14.52)
***LOG Q04=> DpRTmPrep, NiBufReceive (1380 MKADY 168 AtaFathy ) [dpxxdisp.c 11375]
RM-T168, U1380, 900 MKADY, AtaFathy, 09:54:12, M0, W3, ZSDS, 2/2
Thu Jan 31 10:01:29 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 122 / sock 129
(SI_ECONN_BROKEN/73; I4; ST; 10.2.14.53:1144) [nixxi.cpp 4248]
Network error of client T67, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T67 is 10.2.14.53(10.2.14.53)
***LOG Q04=> DpRTmPrep, NiBufReceive (1230 MALGOHARY 67 Mohamedelgoh) [dpxxdisp.c 11375]
RM-T67, U1230, 900 MALGOHARY, Mohamedelgohary, 09:41:13, M0, W2, FBCJ, 2/1
Thu Jan 31 10:21:30 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 100 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T100, U402, 900 EABDELHAKAM, EmanHakam, 10:00:29, M1, W1, , 3/1
Thu Jan 31 10:25:50 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 65 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T65, U1129, 900 MSAAD, MOHAMMEDSAAD, 10:04:38, M0, W6, , 2/0
Thu Jan 31 10:27:50 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 189 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T189, U1638, 000 , MaryRose2, 10:06:37, M0, W5, SESS, 2/0
Thu Jan 31 11:01:54 2008
SoftCancel request for T107 U2249 M1 received from REMOTE_TERMINAL
Thu Jan 31 11:05:12 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 188 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T188, U2347, 900 MABDELGHANY, ManStore, 10:43:54, M0, W10, , 2/0
Thu Jan 31 11:12:30 2008
Network error of client T190, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T190 is 10.2.6.71(10.2.6.71)
***LOG Q04=> DpRTmPrep, NiBufReceive (2917 HAEZZ 190 hanyezzeldin) [dpxxdisp.c 11375]
RM-T190, U2917, 900 HAEZZ, hanyezzeldin, 11:12:18, M0, W3, VELO, 2/1
Thu Jan 31 11:13:14 2008
ERROR => DpRqCheck: T190 in state TM_SLOT_FREE [dpxxdisp.c 6846]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198]
-IN-- sender_id DISPATCHER tid 190 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 2917 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 38334
-IN-- req_info LOGOFF CANCELMODE
ERROR => DpRqCheck: T190 in state TM_SLOT_FREE [dpxxdisp.c 6846]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198]
Thu Jan 31 11:13:15 2008
-IN-- sender_id DISPATCHER tid 190 wp_ca_blk 4 wp_id 0
-IN-- action SEND_TO_WP uid 2917 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 8 rq_id 40183
-IN-- req_info LOGOFF CANCELMODE
Thu Jan 31 11:16:53 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 57 / sock 64
(SI_ECONN_BROKEN/73; I4; ST; 10.2.7.139:1185) [nixxi.cpp 4248]
Network error of client T86, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T86 is 10.2.7.139(10.2.7.139)
***LOG Q04=> DpRTmPrep, NiBufReceive (834 RMOAWAD 86 roshdimoawad) [dpxxdisp.c 11375]
RM-T86, U834, 900 RMOAWAD, roshdimoawad, 10:56:06, M1, W12, FBL5, 3/2
Thu Jan 31 11:19:13 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 105 / sock 112
(SI_ECONN_BROKEN/73; I4; ST; 10.2.7.120:1207) [nixxi.cpp 4248]
Network error of client T143, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T143 is 10.2.7.120(10.2.7.120)
***LOG Q04=> DpRTmPrep, NiBufReceive (552 IFEKRY 143 ibrahimfekry) [dpxxdisp.c 11375]
RM-T143, U552, 900 IFEKRY, ibrahimfekry, 11:19:06, M0, W1, FB01, 3/1
Thu Jan 31 11:56:01 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:56:43 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:56:46 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:57:50 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:14 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:41 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:47 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:49 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:50 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:53 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:01 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:02 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:03 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:04 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:05 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:07 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:08 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:09 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:12 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:15 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:20 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:19:50 2008
DpHdlDeadWp: restart wp (pid=9213) automatically
Thu Jan 31 12:19:56 2008
Network error of client T180, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Thu Jan 31 12:19:56 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 12:19:57 2008
Client address of T180 is 10.2.6.71(10.2.6.71)
***LOG Q04=> DpRTmPrep, NiBufReceive (2942 HAEZZ 180 hanyezzeldin) [dpxxdisp.c 11375]
RM-T180, U2942, 900 HAEZZ, hanyezzeldin, 11:51:33, M0, W0, VELO, 2/1
Thu Jan 31 12:19:58 2008
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 6908]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198]
-IN-- sender_id REMOTE_TERMINAL tid 180 wp_ca_blk 5 wp_id -1
-IN-- action SEND_TO_WP uid 2942 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 375 rq_id 49950
Thu Jan 31 12:21:27 2008
ERROR => W0 (pid 9340) died [dpxxdisp.c 14319]
Thu Jan 31 12:21:29 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 12:30:53 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 52 / sock 158
(SI_ECONN_BROKEN/73; I4; ST; 10.2.5.110:1255) [nixxi.cpp 4248]
Network error of client T113, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T113 is 10.2.5.110(10.2.5.110)
***LOG Q04=> DpRTmPrep, NiBufReceive (2713 MMAGDY 113 MOHAMEDMAGDI) [dpxxdisp.c 11375]
RM-T113, U2713, 900 MMAGDY, MOHAMEDMAGDI, 12:27:33, M1, W8, FB1D, 4/2
Thu Jan 31 12:39:20 2008
SoftCancel request for T117 U2416 M1 received from REMOTE_TERMINAL
Thu Jan 31 12:54:32 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:56:17 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:59:34 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 108 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T108, U4450, 900 EABDELHAKAM, EmanHakam, 12:38:22, M0, W7, FTR0, 2/2
Thu Jan 31 13:06:12 2008
ERROR => DpRqCheck: T162 in state TM_SLOT_FREE [dpxxdisp.c 6846]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198] -
How to know business process related to fico
Hi ,
Basically i am abaper , till now i handled tasks related to mm and sd.
But recently i am working on FICO module, as this is new to me .
please kindly suggest me how to know the business process related to fico.
The terminology is also looking different.
my role in this organization is as a techno functional (fico).
regards,
HaripriyaDear Haripriya,
Please try to get basic training of accounts, Debit, Credit, entry posting concepts.
After you have go the basic idea study the following links:
Financial Accounting
http://help.sap.com/saphelp_erp60_sp/helpdata/en/56/df293581dc1f79e10000009b38f889/frameset.htm
Controlling
http://help.sap.com/saphelp_erp60_sp/helpdata/en/02/30793485231774e10000009b38f83b/frameset.htm
Thanks & Regards
Sanjay Marathe
Maybe you are looking for
-
ABAP-Mapping with CALL TRANSFORMATION
Hi everybody, I got an ABAP mapping that uses CALL TRANSFORMATION: TRY. CALL TRANSFORMATION (strxsltid) SOURCE XML IDOCXML_DOCUMENT RESULT XML result. CATCH cx_xslt_abap_call_error INTO lr_oref. text = lr_oref->get_tex
-
Integrating Polycom SP384 Video System
I am trying to migrate a PBX system to the Cisco CUCM solution with a 3845 router as the PSTN gateway. Everything is working fine except for the Polycom SP384 h.320 video endpoint which is also directly connected to the 3845 router. I can make OUTGOI
-
Blackberry Link - accessing backed up contacts
I already backed up my BlackBerry before, how can I actually see all the contacts on my computer from the back up?
-
How to run report from java code
I am a begginner in Oracle Reports. We have no AS installed, so we run reports either from Reports Builder or by calling rwrun. I would like to know how to embed report calling into java code , let's say into simple swing application. Some example co
-
Can't install Firmware EFI 2.7 on MacBook Pro late 2011
The update still in update mode